! Started logfile: /d2/scr/pima/rv101_uvs/J2356+8152_X_uvs.log on Sat Nov 29 16:39:32 2014 obs /d2/scr/pima/rv101_uvs/J2356+8152_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_X_uva.fits ! AN table 1: 174 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.984515 visibilities/baseline/integration-bin. ! Found source: J2356+8152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 24668 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J2356+8152_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.114594Jy sigma=18.312840 ! Fit after self-cal, rms=0.562630Jy sigma=9.093122 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5406 mas, bmaj=2.117 mas, bpa=-66.69 degrees ! Estimated noise=0.662001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.33194 Jy ! Component: 100 - total flux cleaned = 0.415547 Jy ! Total flux subtracted in 100 components = 0.415547 Jy ! Clean residual min=-0.017718 max=0.035527 Jy/beam ! Clean residual mean=-0.000020 rms=0.003474 Jy/beam ! Combined flux in latest and established models = 0.415547 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.415547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140498Jy sigma=2.258073 ! Fit after self-cal, rms=0.140462Jy sigma=2.257008 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410401 Jy ! Component: 100 - total flux cleaned = 0.0649395 Jy ! Total flux subtracted in 100 components = 0.0649395 Jy ! Clean residual min=-0.007567 max=0.012118 Jy/beam ! Clean residual mean=-0.000008 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.480486 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.480486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123025Jy sigma=1.922235 ! Fit after self-cal, rms=0.122964Jy sigma=1.920956 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147909 Jy ! Component: 100 - total flux cleaned = 0.0236363 Jy ! Total flux subtracted in 100 components = 0.0236363 Jy ! Clean residual min=-0.006148 max=0.007208 Jy/beam ! Clean residual mean=-0.000003 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.504123 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.504123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120178Jy sigma=1.864170 ! Fit after self-cal, rms=0.120167Jy sigma=1.863927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7277 mas, bmaj=2.482 mas, bpa=-68.97 degrees ! Estimated noise=0.31608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115707 Jy ! Component: 100 - total flux cleaned = 0.0177188 Jy ! Component: 150 - total flux cleaned = 0.0216417 Jy ! Component: 200 - total flux cleaned = 0.0243279 Jy ! Total flux subtracted in 200 components = 0.0243279 Jy ! Clean residual min=-0.007667 max=0.007564 Jy/beam ! Clean residual mean=0.000003 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.52845 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 41 components and 0.528451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119179Jy sigma=1.842841 ! Fit after self-cal, rms=0.119161Jy sigma=1.842410 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7277 x 2.482 at -68.97 degrees (North through East) ! Clean map min=-0.0070818 max=0.45373 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00 KP 1.00* LA 1.03 ! MK 0.98 NL 0.99 OV 0.96 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.00 KP 1.00* LA 0.99 ! MK 1.01 NL 1.00 OV 0.94 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.05 KP 1.00* LA 1.05 ! MK 0.99 NL 1.03 OV 1.02 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.05 KP 1.00* LA 1.04 ! MK 1.03 NL 1.06 OV 0.99 PT 0.92 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.119161Jy sigma=1.842410 ! Fit after self-cal, rms=0.117604Jy sigma=1.792145 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7309 mas, bmaj=2.488 mas, bpa=-68.91 degrees ! Estimated noise=0.316027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346827 Jy ! Component: 100 - total flux cleaned = 0.00503623 Jy ! Component: 150 - total flux cleaned = 0.00546699 Jy ! Component: 200 - total flux cleaned = 0.00573964 Jy ! Total flux subtracted in 200 components = 0.00573964 Jy ! Clean residual min=-0.002794 max=0.002406 Jy/beam ! Clean residual mean=-0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.53419 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.53419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117372Jy sigma=1.788231 ! Fit after self-cal, rms=0.117383Jy sigma=1.787867 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117383Jy sigma=1.787867 ! Fit after self-cal, rms=0.117156Jy sigma=1.786595 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7307 mas, bmaj=2.486 mas, bpa=-68.95 degrees ! Estimated noise=0.315376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126198 Jy ! Component: 100 - total flux cleaned = 0.00162163 Jy ! Component: 150 - total flux cleaned = 0.00175796 Jy ! Component: 200 - total flux cleaned = 0.0019548 Jy ! Total flux subtracted in 200 components = 0.0019548 Jy ! Clean residual min=-0.002372 max=0.002088 Jy/beam ! Clean residual mean=-0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.536145 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.536145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117102Jy sigma=1.785784 ! Fit after self-cal, rms=0.117106Jy sigma=1.785734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240546 Jy ! Component: 100 - total flux cleaned = 0.000409635 Jy ! Component: 150 - total flux cleaned = 0.000592262 Jy ! Component: 200 - total flux cleaned = 0.000703237 Jy ! Total flux subtracted in 200 components = 0.000703237 Jy ! Clean residual min=-0.002334 max=0.002099 Jy/beam ! Clean residual mean=-0.000001 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.536848 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.536848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117087Jy sigma=1.785494 ! Fit after self-cal, rms=0.117087Jy sigma=1.785484 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117087Jy sigma=1.785484 ! Fit after self-cal, rms=0.117057Jy sigma=1.785349 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7309 mas, bmaj=2.487 mas, bpa=-68.93 degrees ! Estimated noise=0.315169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353267 Jy ! Component: 100 - total flux cleaned = 0.00044915 Jy ! Component: 150 - total flux cleaned = 0.000580969 Jy ! Component: 200 - total flux cleaned = 0.000654111 Jy ! Total flux subtracted in 200 components = 0.000654111 Jy ! Clean residual min=-0.002253 max=0.002059 Jy/beam ! Clean residual mean=-0.000000 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.537502 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 0.537502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117040Jy sigma=1.785130 ! Fit after self-cal, rms=0.117041Jy sigma=1.785115 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.82519e-05 Jy ! Component: 100 - total flux cleaned = 9.96754e-05 Jy ! Component: 150 - total flux cleaned = 0.000119646 Jy ! Component: 200 - total flux cleaned = 0.000157925 Jy ! Total flux subtracted in 200 components = 0.000157925 Jy ! Clean residual min=-0.002238 max=0.002049 Jy/beam ! Clean residual mean=-0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.53766 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.53766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117033Jy sigma=1.785018 ! Fit after self-cal, rms=0.117033Jy sigma=1.785014 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117033Jy sigma=1.785014 ! Fit after self-cal, rms=0.117034Jy sigma=1.784966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.851 mas, bmaj=4.429 mas, bpa=-80.03 degrees ! Estimated noise=0.422585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316261 Jy ! Component: 100 - total flux cleaned = 0.000222675 Jy ! Component: 150 - total flux cleaned = 0.000183785 Jy ! Component: 200 - total flux cleaned = 0.00016672 Jy ! Total flux subtracted in 200 components = 0.00016672 Jy ! Clean residual min=-0.002819 max=0.002202 Jy/beam ! Clean residual mean=0.000002 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.537827 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.537827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117030Jy sigma=1.784921 ! Fit after self-cal, rms=0.117032Jy sigma=1.784911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108203 Jy ! Component: 100 - total flux cleaned = -9.38149e-05 Jy ! Component: 150 - total flux cleaned = -9.36095e-05 Jy ! Component: 200 - total flux cleaned = -8.20856e-05 Jy ! Total flux subtracted in 200 components = -8.20856e-05 Jy ! Clean residual min=-0.002797 max=0.002213 Jy/beam ! Clean residual mean=0.000003 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.537745 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.537745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117029Jy sigma=1.784903 ! Fit after self-cal, rms=0.117030Jy sigma=1.784895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7311 mas, bmaj=2.487 mas, bpa=-68.92 degrees ! Estimated noise=0.315087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7311 x 2.487 at -68.92 degrees (North through East) ! Clean map min=-0.0020185 max=0.45273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5429 mas, bmaj=2.12 mas, bpa=-66.67 degrees ! Estimated noise=0.663094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332081 Jy ! Component: 100 - total flux cleaned = 0.416014 Jy ! Component: 150 - total flux cleaned = 0.455691 Jy ! Component: 200 - total flux cleaned = 0.478384 Jy ! Total flux subtracted in 200 components = 0.478384 Jy ! Clean residual min=-0.007089 max=0.011531 Jy/beam ! Clean residual mean=-0.000012 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.478384 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.478384 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7311 mas, bmaj=2.487 mas, bpa=-68.92 degrees ! Estimated noise=0.315087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213218 Jy ! Component: 100 - total flux cleaned = 0.0324525 Jy ! Component: 150 - total flux cleaned = 0.0392045 Jy ! Component: 200 - total flux cleaned = 0.0438918 Jy ! Total flux subtracted in 200 components = 0.0438918 Jy ! Clean residual min=-0.002939 max=0.002990 Jy/beam ! Clean residual mean=-0.000006 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.522276 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.522276 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.851 mas, bmaj=4.429 mas, bpa=-80.03 degrees ! Estimated noise=0.422585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654268 Jy ! Component: 100 - total flux cleaned = 0.0100867 Jy ! Component: 150 - total flux cleaned = 0.0123262 Jy ! Component: 200 - total flux cleaned = 0.0135883 Jy ! Total flux subtracted in 200 components = 0.0135883 Jy ! Clean residual min=-0.003115 max=0.002085 Jy/beam ! Clean residual mean=0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.535864 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476151 Jy ! Component: 100 - total flux cleaned = 0.000842384 Jy ! Component: 150 - total flux cleaned = 0.00110412 Jy ! Component: 200 - total flux cleaned = 0.00131399 Jy ! Total flux subtracted in 200 components = 0.00131399 Jy ! Clean residual min=-0.002933 max=0.002116 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.537178 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 91 components and 0.537178 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7311 mas, bmaj=2.487 mas, bpa=-68.92 degrees ! Estimated noise=0.315087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.61457e-05 Jy ! Component: 100 - total flux cleaned = 0.000205694 Jy ! Component: 150 - total flux cleaned = 0.000268519 Jy ! Component: 200 - total flux cleaned = 0.000267644 Jy ! Total flux subtracted in 200 components = 0.000267644 Jy ! Clean residual min=-0.002249 max=0.001992 Jy/beam ! Clean residual mean=0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.537446 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.537446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117042Jy sigma=1.785049 ! Fit after self-cal, rms=0.117037Jy sigma=1.785009 wmodel /d2/scr/pima/rv101_uvs/J2356+8152_X_map.mod ! Writing 110 model components to file: /d2/scr/pima/rv101_uvs/J2356+8152_X_map.mod wobs /d2/scr/pima/rv101_uvs/J2356+8152_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J2356+8152_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J2356+8152_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937935 Jy ! Component: 100 - total flux cleaned = -0.00105145 Jy ! Component: 150 - total flux cleaned = -0.00105243 Jy ! Component: 200 - total flux cleaned = -0.00108706 Jy ! Component: 250 - total flux cleaned = -0.00105276 Jy ! Component: 300 - total flux cleaned = -0.000855192 Jy ! Component: 350 - total flux cleaned = -0.000789947 Jy ! Component: 400 - total flux cleaned = -0.000567477 Jy ! Component: 450 - total flux cleaned = -0.000505231 Jy ! Component: 500 - total flux cleaned = -0.000351681 Jy ! Component: 550 - total flux cleaned = -0.000261191 Jy ! Component: 600 - total flux cleaned = -0.000142248 Jy ! Component: 650 - total flux cleaned = -2.48072e-05 Jy ! Component: 700 - total flux cleaned = 9.06028e-05 Jy ! Component: 750 - total flux cleaned = 0.000119016 Jy ! Component: 800 - total flux cleaned = 0.000232146 Jy ! Component: 850 - total flux cleaned = 0.000231883 Jy ! Component: 900 - total flux cleaned = 0.000397401 Jy ! Component: 950 - total flux cleaned = 0.000424342 Jy ! Component: 1000 - total flux cleaned = 0.000532137 Jy ! Component: 1050 - total flux cleaned = 0.00050535 Jy ! Component: 1100 - total flux cleaned = 0.000611012 Jy ! Component: 1150 - total flux cleaned = 0.000637083 Jy ! Component: 1200 - total flux cleaned = 0.00068861 Jy ! Component: 1250 - total flux cleaned = 0.000791202 Jy ! Component: 1300 - total flux cleaned = 0.00076543 Jy ! Component: 1350 - total flux cleaned = 0.00091648 Jy ! Component: 1400 - total flux cleaned = 0.000916313 Jy ! Component: 1450 - total flux cleaned = 0.000940864 Jy ! Component: 1500 - total flux cleaned = 0.00101408 Jy ! Component: 1550 - total flux cleaned = 0.00103838 Jy ! Component: 1600 - total flux cleaned = 0.00120678 Jy ! Component: 1650 - total flux cleaned = 0.00127827 Jy ! Component: 1700 - total flux cleaned = 0.00134934 Jy ! Component: 1750 - total flux cleaned = 0.00151423 Jy ! Component: 1800 - total flux cleaned = 0.00163066 Jy ! Component: 1850 - total flux cleaned = 0.00169992 Jy ! Component: 1900 - total flux cleaned = 0.00176912 Jy ! Component: 1950 - total flux cleaned = 0.00188353 Jy ! Component: 2000 - total flux cleaned = 0.00190656 Jy ! Component: 2050 - total flux cleaned = 0.00215469 Jy ! Component: 2100 - total flux cleaned = 0.00226648 Jy ! Component: 2150 - total flux cleaned = 0.00226654 Jy ! Component: 2200 - total flux cleaned = 0.00235505 Jy ! Component: 2250 - total flux cleaned = 0.00250889 Jy ! Component: 2300 - total flux cleaned = 0.00259618 Jy ! Component: 2350 - total flux cleaned = 0.00268321 Jy ! Component: 2400 - total flux cleaned = 0.00283435 Jy ! Component: 2450 - total flux cleaned = 0.00292017 Jy ! Component: 2500 - total flux cleaned = 0.00300531 Jy ! Component: 2550 - total flux cleaned = 0.00319584 Jy ! Component: 2600 - total flux cleaned = 0.0033011 Jy ! Component: 2650 - total flux cleaned = 0.00328008 Jy ! Component: 2700 - total flux cleaned = 0.00336356 Jy ! Component: 2750 - total flux cleaned = 0.00346728 Jy ! Component: 2800 - total flux cleaned = 0.00357031 Jy ! Component: 2850 - total flux cleaned = 0.00367284 Jy ! Component: 2900 - total flux cleaned = 0.00387664 Jy ! Component: 2950 - total flux cleaned = 0.00389681 Jy ! Component: 3000 - total flux cleaned = 0.00403803 Jy ! Component: 3050 - total flux cleaned = 0.0041584 Jy ! Component: 3100 - total flux cleaned = 0.00429819 Jy ! Component: 3150 - total flux cleaned = 0.00437758 Jy ! Component: 3200 - total flux cleaned = 0.00451606 Jy ! Component: 3250 - total flux cleaned = 0.00459488 Jy ! Component: 3300 - total flux cleaned = 0.00467332 Jy ! Component: 3350 - total flux cleaned = 0.00475128 Jy ! Component: 3400 - total flux cleaned = 0.00488728 Jy ! Component: 3450 - total flux cleaned = 0.00494524 Jy ! Component: 3500 - total flux cleaned = 0.00507981 Jy ! Component: 3550 - total flux cleaned = 0.00519465 Jy ! Component: 3600 - total flux cleaned = 0.00515669 Jy ! Component: 3650 - total flux cleaned = 0.00527059 Jy ! Component: 3700 - total flux cleaned = 0.00534629 Jy ! Component: 3750 - total flux cleaned = 0.00549683 Jy ! Component: 3800 - total flux cleaned = 0.00547795 Jy ! Component: 3850 - total flux cleaned = 0.00557138 Jy ! Component: 3900 - total flux cleaned = 0.00568289 Jy ! Component: 3950 - total flux cleaned = 0.00571994 Jy ! Component: 4000 - total flux cleaned = 0.00583067 Jy ! Component: 4050 - total flux cleaned = 0.00590428 Jy ! Total flux subtracted in 4096 components = 0.00595911 Jy ! Clean residual min=-0.001213 max=0.001250 Jy/beam ! Clean residual mean=0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.543405 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 406 components and 0.543405 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J2356+8152_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7311 x 2.487 at -68.92 degrees (North through East) ! Clean map min=-0.0015384 max=0.45313 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453131 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031196 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.206536 0.206536 0.413073 0.826146 1.65229 3.30458 6.60916 13.2183 26.4367 52.8733 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.453 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1452.53 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J2356+8152_X_uvs.log closed on Sat Nov 29 16:39:39 2014