! Started logfile: /d2/scr/pima/rv101_uvs/J2356+8152_S_uvs.log on Sat Nov 29 13:58:06 2014 obs /d2/scr/pima/rv101_uvs/J2356+8152_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_S_uva.fits ! AN table 1: 44 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2356+8152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6336 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J2356+8152_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099509Jy sigma=16.020317 ! Fit after self-cal, rms=0.539574Jy sigma=8.018434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=8.082 mas, bpa=-66.56 degrees ! Estimated noise=1.16266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.351161 Jy ! Component: 100 - total flux cleaned = 0.428515 Jy ! Total flux subtracted in 100 components = 0.428515 Jy ! Clean residual min=-0.011446 max=0.024833 Jy/beam ! Clean residual mean=-0.000044 rms=0.003281 Jy/beam ! Combined flux in latest and established models = 0.428515 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.428515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101566Jy sigma=1.352705 ! Fit after self-cal, rms=0.101585Jy sigma=1.352059 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271609 Jy ! Component: 100 - total flux cleaned = 0.0416515 Jy ! Total flux subtracted in 100 components = 0.0416515 Jy ! Clean residual min=-0.010552 max=0.010086 Jy/beam ! Clean residual mean=0.000020 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 0.470167 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.470167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089916Jy sigma=1.209798 ! Fit after self-cal, rms=0.089879Jy sigma=1.209249 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=9.53 mas, bpa=-68.4 degrees ! Estimated noise=0.6244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119149 Jy ! Component: 100 - total flux cleaned = 0.0161154 Jy ! Component: 150 - total flux cleaned = 0.0164046 Jy ! Component: 200 - total flux cleaned = 0.016399 Jy ! Total flux subtracted in 200 components = 0.016399 Jy ! Clean residual min=-0.009090 max=0.010160 Jy/beam ! Clean residual mean=0.000086 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.486566 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.486566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087554Jy sigma=1.198440 ! Fit after self-cal, rms=0.087541Jy sigma=1.198242 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.051 x 9.53 at -68.4 degrees (North through East) ! Clean map min=-0.0088716 max=0.46503 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.07 KP 1.20 LA 1.05 ! MK 1.01 NL 1.02 OV 1.00 PT 1.03 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.00 KP 1.04 LA 0.95 ! MK 1.00 NL 1.05 OV 1.01 PT 1.04 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.087541Jy sigma=1.198242 ! Fit after self-cal, rms=0.084725Jy sigma=1.120122 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=9.523 mas, bpa=-68.3 degrees ! Estimated noise=0.641063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114808 Jy ! Component: 100 - total flux cleaned = 0.0155705 Jy ! Component: 150 - total flux cleaned = 0.0161499 Jy ! Component: 200 - total flux cleaned = 0.0159881 Jy ! Total flux subtracted in 200 components = 0.0159881 Jy ! Clean residual min=-0.006768 max=0.007332 Jy/beam ! Clean residual mean=0.000094 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.502554 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.502554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082657Jy sigma=1.110120 ! Fit after self-cal, rms=0.082653Jy sigma=1.110032 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082653Jy sigma=1.110032 ! Fit after self-cal, rms=0.073006Jy sigma=1.006272 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=9.535 mas, bpa=-68.39 degrees ! Estimated noise=0.634711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00422325 Jy ! Component: 100 - total flux cleaned = -0.00671484 Jy ! Component: 150 - total flux cleaned = -0.00735805 Jy ! Component: 200 - total flux cleaned = -0.00783766 Jy ! Total flux subtracted in 200 components = -0.00783766 Jy ! Clean residual min=-0.006181 max=0.006261 Jy/beam ! Clean residual mean=0.000087 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.494716 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.494716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072866Jy sigma=0.999767 ! Fit after self-cal, rms=0.072866Jy sigma=0.999693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258331 Jy ! Component: 100 - total flux cleaned = -0.00053829 Jy ! Component: 150 - total flux cleaned = -0.000708092 Jy ! Component: 200 - total flux cleaned = -0.000865241 Jy ! Total flux subtracted in 200 components = -0.000865241 Jy ! Clean residual min=-0.006119 max=0.006187 Jy/beam ! Clean residual mean=0.000084 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.493851 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.493851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072836Jy sigma=0.998682 ! Fit after self-cal, rms=0.072832Jy sigma=0.998665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072832Jy sigma=0.998665 ! Fit after self-cal, rms=0.072409Jy sigma=0.996773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=9.548 mas, bpa=-68.43 degrees ! Estimated noise=0.630841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00291306 Jy ! Component: 100 - total flux cleaned = -0.00462327 Jy ! Component: 150 - total flux cleaned = -0.00526516 Jy ! Component: 200 - total flux cleaned = -0.00547472 Jy ! Total flux subtracted in 200 components = -0.00547472 Jy ! Clean residual min=-0.006156 max=0.006163 Jy/beam ! Clean residual mean=0.000084 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.488376 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.488376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072368Jy sigma=0.993193 ! Fit after self-cal, rms=0.072365Jy sigma=0.993185 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204491 Jy ! Component: 100 - total flux cleaned = -0.000346551 Jy ! Component: 150 - total flux cleaned = -0.000476371 Jy ! Component: 200 - total flux cleaned = -0.000597208 Jy ! Total flux subtracted in 200 components = -0.000597208 Jy ! Clean residual min=-0.006082 max=0.006107 Jy/beam ! Clean residual mean=0.000082 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.487779 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.487779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072350Jy sigma=0.992590 ! Fit after self-cal, rms=0.072347Jy sigma=0.992584 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072347Jy sigma=0.992584 ! Fit after self-cal, rms=0.072082Jy sigma=0.991612 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.148 mas, bmaj=16.88 mas, bpa=-81.21 degrees ! Estimated noise=0.767245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376178 Jy ! Component: 100 - total flux cleaned = -0.00559742 Jy ! Component: 150 - total flux cleaned = -0.00605202 Jy ! Component: 200 - total flux cleaned = -0.00621061 Jy ! Total flux subtracted in 200 components = -0.00621061 Jy ! Clean residual min=-0.008253 max=0.008001 Jy/beam ! Clean residual mean=0.000156 rms=0.002464 Jy/beam ! Combined flux in latest and established models = 0.481568 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.481568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072104Jy sigma=0.989364 ! Fit after self-cal, rms=0.072094Jy sigma=0.989318 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145812 Jy ! Component: 100 - total flux cleaned = -0.000291529 Jy ! Component: 150 - total flux cleaned = -0.000392917 Jy ! Component: 200 - total flux cleaned = -0.000459364 Jy ! Total flux subtracted in 200 components = -0.000459364 Jy ! Clean residual min=-0.008218 max=0.007954 Jy/beam ! Clean residual mean=0.000153 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.481109 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 0.481109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072089Jy sigma=0.989291 ! Fit after self-cal, rms=0.072085Jy sigma=0.989271 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=9.557 mas, bpa=-68.46 degrees ! Estimated noise=0.628104 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 9.557 at -68.46 degrees (North through East) ! Clean map min=-0.0065034 max=0.47403 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=8.097 mas, bpa=-66.64 degrees ! Estimated noise=1.17626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.355165 Jy ! Component: 100 - total flux cleaned = 0.433479 Jy ! Component: 150 - total flux cleaned = 0.459118 Jy ! Component: 200 - total flux cleaned = 0.472789 Jy ! Total flux subtracted in 200 components = 0.472789 Jy ! Clean residual min=-0.007389 max=0.007522 Jy/beam ! Clean residual mean=0.000020 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.472789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.472789 Jy ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=9.557 mas, bpa=-68.46 degrees ! Estimated noise=0.628104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109834 Jy ! Component: 100 - total flux cleaned = 0.0144328 Jy ! Component: 150 - total flux cleaned = 0.0151843 Jy ! Component: 200 - total flux cleaned = 0.0151847 Jy ! Total flux subtracted in 200 components = 0.0151847 Jy ! Clean residual min=-0.006598 max=0.006501 Jy/beam ! Clean residual mean=0.000092 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.487974 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.487974 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.148 mas, bmaj=16.88 mas, bpa=-81.21 degrees ! Estimated noise=0.767245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183526 Jy ! Component: 100 - total flux cleaned = -0.00240098 Jy ! Component: 150 - total flux cleaned = -0.0028991 Jy ! Component: 200 - total flux cleaned = -0.0031755 Jy ! Total flux subtracted in 200 components = -0.0031755 Jy ! Clean residual min=-0.008498 max=0.008454 Jy/beam ! Clean residual mean=0.000174 rms=0.002584 Jy/beam ! Combined flux in latest and established models = 0.484798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344719 Jy ! Component: 100 - total flux cleaned = -0.000588822 Jy ! Component: 150 - total flux cleaned = -0.000744592 Jy ! Component: 200 - total flux cleaned = -0.00096825 Jy ! Total flux subtracted in 200 components = -0.00096825 Jy ! Clean residual min=-0.008431 max=0.008329 Jy/beam ! Clean residual mean=0.000168 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 0.48383 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.48383 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=9.557 mas, bpa=-68.46 degrees ! Estimated noise=0.628104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124998 Jy ! Component: 100 - total flux cleaned = 0.00135308 Jy ! Component: 150 - total flux cleaned = 0.00135646 Jy ! Component: 200 - total flux cleaned = 0.00123385 Jy ! Total flux subtracted in 200 components = 0.00123385 Jy ! Clean residual min=-0.006240 max=0.006325 Jy/beam ! Clean residual mean=0.000084 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.485064 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.485064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072326Jy sigma=0.991968 ! Fit after self-cal, rms=0.072284Jy sigma=0.991730 wmodel /d2/scr/pima/rv101_uvs/J2356+8152_S_map.mod ! Writing 43 model components to file: /d2/scr/pima/rv101_uvs/J2356+8152_S_map.mod wobs /d2/scr/pima/rv101_uvs/J2356+8152_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J2356+8152_S_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J2356+8152_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110232 Jy ! Component: 100 - total flux cleaned = -0.000217267 Jy ! Component: 150 - total flux cleaned = 0.00019145 Jy ! Component: 200 - total flux cleaned = 0.000485418 Jy ! Component: 250 - total flux cleaned = 0.000576931 Jy ! Component: 300 - total flux cleaned = 0.000487754 Jy ! Component: 350 - total flux cleaned = 0.000575577 Jy ! Component: 400 - total flux cleaned = 0.000743088 Jy ! Component: 450 - total flux cleaned = 0.000989656 Jy ! Component: 500 - total flux cleaned = 0.00146473 Jy ! Component: 550 - total flux cleaned = 0.00176958 Jy ! Component: 600 - total flux cleaned = 0.00221647 Jy ! Component: 650 - total flux cleaned = 0.00243435 Jy ! Component: 700 - total flux cleaned = 0.00264886 Jy ! Component: 750 - total flux cleaned = 0.00313678 Jy ! Component: 800 - total flux cleaned = 0.00320368 Jy ! Component: 850 - total flux cleaned = 0.00333809 Jy ! Component: 900 - total flux cleaned = 0.00373128 Jy ! Component: 950 - total flux cleaned = 0.00392352 Jy ! Component: 1000 - total flux cleaned = 0.00411381 Jy ! Component: 1050 - total flux cleaned = 0.00429905 Jy ! Component: 1100 - total flux cleaned = 0.00435874 Jy ! Component: 1150 - total flux cleaned = 0.00441869 Jy ! Component: 1200 - total flux cleaned = 0.00441908 Jy ! Component: 1250 - total flux cleaned = 0.00453452 Jy ! Component: 1300 - total flux cleaned = 0.00475993 Jy ! Component: 1350 - total flux cleaned = 0.00481497 Jy ! Component: 1400 - total flux cleaned = 0.00492368 Jy ! Component: 1450 - total flux cleaned = 0.00497738 Jy ! Component: 1500 - total flux cleaned = 0.00513742 Jy ! Component: 1550 - total flux cleaned = 0.00518951 Jy ! Component: 1600 - total flux cleaned = 0.00529218 Jy ! Component: 1650 - total flux cleaned = 0.00529214 Jy ! Component: 1700 - total flux cleaned = 0.00534233 Jy ! Component: 1750 - total flux cleaned = 0.00524343 Jy ! Component: 1800 - total flux cleaned = 0.00539083 Jy ! Component: 1850 - total flux cleaned = 0.00539084 Jy ! Component: 1900 - total flux cleaned = 0.00539075 Jy ! Component: 1950 - total flux cleaned = 0.00557923 Jy ! Component: 2000 - total flux cleaned = 0.00553326 Jy ! Component: 2050 - total flux cleaned = 0.00571698 Jy ! Component: 2100 - total flux cleaned = 0.00571651 Jy ! Component: 2150 - total flux cleaned = 0.00576203 Jy ! Component: 2200 - total flux cleaned = 0.00580632 Jy ! Component: 2250 - total flux cleaned = 0.00598147 Jy ! Component: 2300 - total flux cleaned = 0.00589475 Jy ! Component: 2350 - total flux cleaned = 0.00593782 Jy ! Component: 2400 - total flux cleaned = 0.00606515 Jy ! Component: 2450 - total flux cleaned = 0.00610649 Jy ! Component: 2500 - total flux cleaned = 0.0061895 Jy ! Component: 2550 - total flux cleaned = 0.00635426 Jy ! Component: 2600 - total flux cleaned = 0.00631352 Jy ! Component: 2650 - total flux cleaned = 0.00655585 Jy ! Component: 2700 - total flux cleaned = 0.00671495 Jy ! Component: 2750 - total flux cleaned = 0.00667605 Jy ! Component: 2800 - total flux cleaned = 0.00691124 Jy ! Component: 2850 - total flux cleaned = 0.00698862 Jy ! Component: 2900 - total flux cleaned = 0.00698885 Jy ! Component: 2950 - total flux cleaned = 0.00725582 Jy ! Component: 3000 - total flux cleaned = 0.00729318 Jy ! Component: 3050 - total flux cleaned = 0.00729362 Jy ! Component: 3100 - total flux cleaned = 0.00759032 Jy ! Component: 3150 - total flux cleaned = 0.00744278 Jy ! Component: 3200 - total flux cleaned = 0.00744333 Jy ! Component: 3250 - total flux cleaned = 0.00758812 Jy ! Component: 3300 - total flux cleaned = 0.00765982 Jy ! Component: 3350 - total flux cleaned = 0.00780208 Jy ! Component: 3400 - total flux cleaned = 0.00780167 Jy ! Component: 3450 - total flux cleaned = 0.00783663 Jy ! Component: 3500 - total flux cleaned = 0.0078713 Jy ! Component: 3550 - total flux cleaned = 0.0080091 Jy ! Component: 3600 - total flux cleaned = 0.00797512 Jy ! Component: 3650 - total flux cleaned = 0.0081108 Jy ! Component: 3700 - total flux cleaned = 0.00827882 Jy ! Component: 3750 - total flux cleaned = 0.00824514 Jy ! Component: 3800 - total flux cleaned = 0.00834459 Jy ! Component: 3850 - total flux cleaned = 0.0083446 Jy ! Component: 3900 - total flux cleaned = 0.00834468 Jy ! Component: 3950 - total flux cleaned = 0.00853903 Jy ! Component: 4000 - total flux cleaned = 0.00847493 Jy ! Component: 4050 - total flux cleaned = 0.00850718 Jy ! Total flux subtracted in 4096 components = 0.00857063 Jy ! Clean residual min=-0.001718 max=0.001739 Jy/beam ! Clean residual mean=0.000014 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.493635 Jy keep ! Adding 364 model components to the UV plane model. ! The established model now contains 407 components and 0.493635 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J2356+8152_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 9.557 at -68.46 degrees (North through East) ! Clean map min=-0.0048446 max=0.47206 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J2356+8152_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.472059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00062024 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.394171 0.394171 0.788342 1.57668 3.15337 6.30673 12.6135 25.2269 50.4539 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.472 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 761.091 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J2356+8152_S_uvs.log closed on Sat Nov 29 13:58:10 2014