! Started logfile: /d2/scr/pima/rv101_uvs/J2211-1328_X_uvs.log on Sat Nov 29 16:38:28 2014 obs /d2/scr/pima/rv101_uvs/J2211-1328_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J2211-1328_X_uva.fits ! AN table 1: 36 integrations on 15 of 15 possible baselines. ! AN table 2: 99 integrations on 36 of 36 possible baselines. ! AN table 3: 39 integrations on 6 of 6 possible baselines. ! AN table 4: 110 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.725668 visibilities/baseline/integration-bin. ! Found source: J2211-1328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 26960 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J2211-1328_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 220 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! A total of 388 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 220 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! A total of 388 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 220 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! A total of 388 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 220 telescope corrections were flagged in sub-array 2. ! A total of 34 telescope corrections were flagged in sub-array 3. ! A total of 388 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.038995Jy sigma=14.573396 ! Fit after self-cal, rms=0.785970Jy sigma=11.021822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6576 mas, bmaj=1.99 mas, bpa=-6.962 degrees ! Estimated noise=0.754298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164777 Jy ! Component: 100 - total flux cleaned = 0.216877 Jy ! Total flux subtracted in 100 components = 0.216877 Jy ! Clean residual min=-0.010818 max=0.023164 Jy/beam ! Clean residual mean=0.000042 rms=0.002776 Jy/beam ! Combined flux in latest and established models = 0.216877 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.216877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158920Jy sigma=1.772001 ! Fit after self-cal, rms=0.158763Jy sigma=1.770449 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263206 Jy ! Component: 100 - total flux cleaned = 0.0409634 Jy ! Total flux subtracted in 100 components = 0.0409634 Jy ! Clean residual min=-0.007016 max=0.008319 Jy/beam ! Clean residual mean=0.000023 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.257841 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.257841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152941Jy sigma=1.659217 ! Fit after self-cal, rms=0.152878Jy sigma=1.658420 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8453 mas, bmaj=2.314 mas, bpa=-6.509 degrees ! Estimated noise=0.379316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133686 Jy ! Component: 100 - total flux cleaned = 0.0206359 Jy ! Component: 150 - total flux cleaned = 0.0253603 Jy ! Component: 200 - total flux cleaned = 0.0273986 Jy ! Total flux subtracted in 200 components = 0.0273986 Jy ! Clean residual min=-0.004882 max=0.004963 Jy/beam ! Clean residual mean=-0.000004 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.285239 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.285239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151799Jy sigma=1.636104 ! Fit after self-cal, rms=0.151730Jy sigma=1.635290 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8453 x 2.314 at -6.509 degrees (North through East) ! Clean map min=-0.0045001 max=0.21974 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.00* LA 1.01 NL 1.02 ! OV 1.01 PT 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.00 MK 1.01 NL 0.98 OV 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.06 KP 1.00* LA 1.04 ! MK 1.03 NL 0.97 OV 0.95 PT 1.01 ! SC 1.05 WF 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.00* LA 0.99 NL 1.03 ! OV 0.93 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.98 MK 1.02 NL 0.98 OV 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.08 KP 1.00* LA 0.98 ! MK 1.03 NL 1.01 OV 0.95 PT 0.91 ! SC 1.02 WF 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 KP 1.00* LA 1.08 NL 1.06 ! OV 1.03 PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.08 MK 0.95 NL 0.99 OV 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.11 KP 1.00* LA 1.05 ! MK 1.02 NL 1.00 OV 1.03 PT 0.91 ! SC 0.97 WF 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 KP 1.00* LA 1.08 NL 1.05 ! OV 1.01 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.04 MK 0.98 NL 1.03 OV 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.07 HN 1.09 KP 1.00* LA 1.05 ! MK 1.01 NL 1.06 OV 0.97 PT 0.96 ! SC 0.99 WF 0.97 ! ! ! Fit before self-cal, rms=0.151730Jy sigma=1.635290 ! Fit after self-cal, rms=0.149004Jy sigma=1.624240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.848 mas, bmaj=2.322 mas, bpa=-6.427 degrees ! Estimated noise=0.377066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248882 Jy ! Component: 100 - total flux cleaned = 0.00283741 Jy ! Component: 150 - total flux cleaned = 0.00302506 Jy ! Component: 200 - total flux cleaned = 0.0031922 Jy ! Total flux subtracted in 200 components = 0.0031922 Jy ! Clean residual min=-0.003755 max=0.003379 Jy/beam ! Clean residual mean=-0.000021 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.288431 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.288431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148966Jy sigma=1.623271 ! Fit after self-cal, rms=0.148926Jy sigma=1.622991 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148926Jy sigma=1.622991 ! Fit after self-cal, rms=0.148800Jy sigma=1.622936 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8477 mas, bmaj=2.32 mas, bpa=-6.403 degrees ! Estimated noise=0.377018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125856 Jy ! Component: 100 - total flux cleaned = 0.00142937 Jy ! Component: 150 - total flux cleaned = 0.00146386 Jy ! Component: 200 - total flux cleaned = 0.00156392 Jy ! Total flux subtracted in 200 components = 0.00156392 Jy ! Clean residual min=-0.003613 max=0.003187 Jy/beam ! Clean residual mean=-0.000026 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.289995 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.289995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148786Jy sigma=1.622497 ! Fit after self-cal, rms=0.148774Jy sigma=1.622443 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417757 Jy ! Component: 100 - total flux cleaned = 0.000419351 Jy ! Component: 150 - total flux cleaned = 0.000503653 Jy ! Component: 200 - total flux cleaned = 0.000555967 Jy ! Total flux subtracted in 200 components = 0.000555967 Jy ! Clean residual min=-0.003535 max=0.003152 Jy/beam ! Clean residual mean=-0.000027 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.290551 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.290551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148767Jy sigma=1.622218 ! Fit after self-cal, rms=0.148762Jy sigma=1.622194 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148762Jy sigma=1.622194 ! Fit after self-cal, rms=0.147107Jy sigma=1.620359 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8473 mas, bmaj=2.321 mas, bpa=-6.384 degrees ! Estimated noise=0.376769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333574 Jy ! Component: 100 - total flux cleaned = -0.000406271 Jy ! Component: 150 - total flux cleaned = -0.00043545 Jy ! Component: 200 - total flux cleaned = -0.000489501 Jy ! Total flux subtracted in 200 components = -0.000489501 Jy ! Clean residual min=-0.003192 max=0.003009 Jy/beam ! Clean residual mean=-0.000044 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.290062 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.290062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147078Jy sigma=1.620177 ! Fit after self-cal, rms=0.147051Jy sigma=1.620067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54376e-06 Jy ! Component: 100 - total flux cleaned = -6.87356e-06 Jy ! Component: 150 - total flux cleaned = -5.17018e-05 Jy ! Component: 200 - total flux cleaned = -9.31791e-05 Jy ! Total flux subtracted in 200 components = -9.31791e-05 Jy ! Clean residual min=-0.003207 max=0.002971 Jy/beam ! Clean residual mean=-0.000042 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.289969 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.289969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147039Jy sigma=1.619968 ! Fit after self-cal, rms=0.147038Jy sigma=1.619958 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147038Jy sigma=1.619958 ! Fit after self-cal, rms=0.146712Jy sigma=1.620013 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.982 mas, bmaj=4.394 mas, bpa=-9.105 degrees ! Estimated noise=0.474389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282958 Jy ! Component: 100 - total flux cleaned = -0.000340545 Jy ! Component: 150 - total flux cleaned = -0.000340565 Jy ! Component: 200 - total flux cleaned = -0.000364599 Jy ! Total flux subtracted in 200 components = -0.000364599 Jy ! Clean residual min=-0.003914 max=0.003092 Jy/beam ! Clean residual mean=-0.000107 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.289604 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 89 components and 0.289604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146710Jy sigma=1.619927 ! Fit after self-cal, rms=0.146702Jy sigma=1.619918 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.9569e-05 Jy ! Component: 100 - total flux cleaned = 0.000106872 Jy ! Component: 150 - total flux cleaned = 0.000107514 Jy ! Component: 200 - total flux cleaned = 0.000107826 Jy ! Total flux subtracted in 200 components = 0.000107826 Jy ! Clean residual min=-0.003911 max=0.003093 Jy/beam ! Clean residual mean=-0.000107 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.289712 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 92 components and 0.289712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146700Jy sigma=1.619881 ! Fit after self-cal, rms=0.146699Jy sigma=1.619871 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.323 mas, bpa=-6.387 degrees ! Estimated noise=0.376737 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 2.323 at -6.387 degrees (North through East) ! Clean map min=-0.0030139 max=0.21676 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6601 mas, bmaj=1.995 mas, bpa=-6.838 degrees ! Estimated noise=0.756667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164438 Jy ! Component: 100 - total flux cleaned = 0.217333 Jy ! Component: 150 - total flux cleaned = 0.243315 Jy ! Component: 200 - total flux cleaned = 0.257467 Jy ! Total flux subtracted in 200 components = 0.257467 Jy ! Clean residual min=-0.006273 max=0.007024 Jy/beam ! Clean residual mean=0.000018 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.257467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.257467 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.323 mas, bpa=-6.387 degrees ! Estimated noise=0.376737 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119226 Jy ! Component: 100 - total flux cleaned = 0.0184797 Jy ! Component: 150 - total flux cleaned = 0.022639 Jy ! Component: 200 - total flux cleaned = 0.0254122 Jy ! Total flux subtracted in 200 components = 0.0254122 Jy ! Clean residual min=-0.003254 max=0.003319 Jy/beam ! Clean residual mean=-0.000029 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.282879 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 64 components and 0.282879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.982 mas, bmaj=4.394 mas, bpa=-9.105 degrees ! Estimated noise=0.474389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305891 Jy ! Component: 100 - total flux cleaned = 0.00461619 Jy ! Component: 150 - total flux cleaned = 0.00546009 Jy ! Component: 200 - total flux cleaned = 0.00569902 Jy ! Total flux subtracted in 200 components = 0.00569902 Jy ! Clean residual min=-0.003992 max=0.003112 Jy/beam ! Clean residual mean=-0.000100 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.288578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.67125e-05 Jy ! Component: 100 - total flux cleaned = 0.000111892 Jy ! Component: 150 - total flux cleaned = 0.000164267 Jy ! Component: 200 - total flux cleaned = 0.000213759 Jy ! Total flux subtracted in 200 components = 0.000213759 Jy ! Clean residual min=-0.003964 max=0.003100 Jy/beam ! Clean residual mean=-0.000101 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.288792 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.288792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.323 mas, bpa=-6.387 degrees ! Estimated noise=0.376737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230558 Jy ! Component: 100 - total flux cleaned = -0.000229611 Jy ! Component: 150 - total flux cleaned = -0.000195775 Jy ! Component: 200 - total flux cleaned = -0.000140418 Jy ! Total flux subtracted in 200 components = -0.000140418 Jy ! Clean residual min=-0.003290 max=0.003082 Jy/beam ! Clean residual mean=-0.000044 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.288652 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.288652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146693Jy sigma=1.620212 ! Fit after self-cal, rms=0.146674Jy sigma=1.619984 wmodel /d2/scr/pima/rv101_uvs/J2211-1328_X_map.mod ! Writing 104 model components to file: /d2/scr/pima/rv101_uvs/J2211-1328_X_map.mod wobs /d2/scr/pima/rv101_uvs/J2211-1328_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J2211-1328_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J2211-1328_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J2211-1328_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000726692 Jy ! Component: 100 - total flux cleaned = -0.000779166 Jy ! Component: 150 - total flux cleaned = -0.000883437 Jy ! Component: 200 - total flux cleaned = -0.000833806 Jy ! Component: 250 - total flux cleaned = -0.00112404 Jy ! Component: 300 - total flux cleaned = -0.00140423 Jy ! Component: 350 - total flux cleaned = -0.00167789 Jy ! Component: 400 - total flux cleaned = -0.0018122 Jy ! Component: 450 - total flux cleaned = -0.00194276 Jy ! Component: 500 - total flux cleaned = -0.00215556 Jy ! Component: 550 - total flux cleaned = -0.00232285 Jy ! Component: 600 - total flux cleaned = -0.00252801 Jy ! Component: 650 - total flux cleaned = -0.00281012 Jy ! Component: 700 - total flux cleaned = -0.00289019 Jy ! Component: 750 - total flux cleaned = -0.0033212 Jy ! Component: 800 - total flux cleaned = -0.00347549 Jy ! Component: 850 - total flux cleaned = -0.00358934 Jy ! Component: 900 - total flux cleaned = -0.00377611 Jy ! Component: 950 - total flux cleaned = -0.00381302 Jy ! Component: 1000 - total flux cleaned = -0.00392232 Jy ! Component: 1050 - total flux cleaned = -0.00417393 Jy ! Component: 1100 - total flux cleaned = -0.00428008 Jy ! Component: 1150 - total flux cleaned = -0.0045257 Jy ! Component: 1200 - total flux cleaned = -0.00462915 Jy ! Component: 1250 - total flux cleaned = -0.0046981 Jy ! Component: 1300 - total flux cleaned = -0.00493517 Jy ! Component: 1350 - total flux cleaned = -0.00503545 Jy ! Component: 1400 - total flux cleaned = -0.00520079 Jy ! Component: 1450 - total flux cleaned = -0.00533192 Jy ! Component: 1500 - total flux cleaned = -0.00546138 Jy ! Component: 1550 - total flux cleaned = -0.00558938 Jy ! Component: 1600 - total flux cleaned = -0.00555772 Jy ! Component: 1650 - total flux cleaned = -0.0057777 Jy ! Component: 1700 - total flux cleaned = -0.00590204 Jy ! Component: 1750 - total flux cleaned = -0.00611732 Jy ! Component: 1800 - total flux cleaned = -0.00623881 Jy ! Component: 1850 - total flux cleaned = -0.00638977 Jy ! Component: 1900 - total flux cleaned = -0.00653883 Jy ! Component: 1950 - total flux cleaned = -0.00662771 Jy ! Component: 2000 - total flux cleaned = -0.00674481 Jy ! Component: 2050 - total flux cleaned = -0.00686089 Jy ! Component: 2100 - total flux cleaned = -0.00697572 Jy ! Component: 2150 - total flux cleaned = -0.00708972 Jy ! Component: 2200 - total flux cleaned = -0.00725889 Jy ! Component: 2250 - total flux cleaned = -0.00731464 Jy ! Component: 2300 - total flux cleaned = -0.00737034 Jy ! Component: 2350 - total flux cleaned = -0.00753558 Jy ! Component: 2400 - total flux cleaned = -0.00772627 Jy ! Component: 2450 - total flux cleaned = -0.00783415 Jy ! Component: 2500 - total flux cleaned = -0.00794099 Jy ! Component: 2550 - total flux cleaned = -0.0080472 Jy ! Component: 2600 - total flux cleaned = -0.00823149 Jy ! Component: 2650 - total flux cleaned = -0.00833628 Jy ! Component: 2700 - total flux cleaned = -0.00846604 Jy ! Component: 2750 - total flux cleaned = -0.00864615 Jy ! Component: 2800 - total flux cleaned = -0.00879943 Jy ! Component: 2850 - total flux cleaned = -0.00897723 Jy ! Component: 2900 - total flux cleaned = -0.00910332 Jy ! Component: 2950 - total flux cleaned = -0.00927876 Jy ! Component: 3000 - total flux cleaned = -0.00947785 Jy ! Component: 3050 - total flux cleaned = -0.00962609 Jy ! Component: 3100 - total flux cleaned = -0.00982282 Jy ! Component: 3150 - total flux cleaned = -0.00999384 Jy ! Component: 3200 - total flux cleaned = -0.0100907 Jy ! Component: 3250 - total flux cleaned = -0.0102839 Jy ! Component: 3300 - total flux cleaned = -0.0104038 Jy ! Component: 3350 - total flux cleaned = -0.0105945 Jy ! Component: 3400 - total flux cleaned = -0.0107131 Jy ! Component: 3450 - total flux cleaned = -0.0109014 Jy ! Component: 3500 - total flux cleaned = -0.0109951 Jy ! Component: 3550 - total flux cleaned = -0.0112046 Jy ! Component: 3600 - total flux cleaned = -0.0112973 Jy ! Component: 3650 - total flux cleaned = -0.0115041 Jy ! Component: 3700 - total flux cleaned = -0.0115956 Jy ! Component: 3750 - total flux cleaned = -0.0117322 Jy ! Component: 3800 - total flux cleaned = -0.0118904 Jy ! Component: 3850 - total flux cleaned = -0.0120254 Jy ! Component: 3900 - total flux cleaned = -0.0121597 Jy ! Component: 3950 - total flux cleaned = -0.0122934 Jy ! Component: 4000 - total flux cleaned = -0.0124482 Jy ! Component: 4050 - total flux cleaned = -0.0125582 Jy ! Total flux subtracted in 4096 components = -0.0127555 Jy ! Clean residual min=-0.001358 max=0.001331 Jy/beam ! Clean residual mean=-0.000049 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.275896 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 368 components and 0.275896 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J2211-1328_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 2.323 at -6.387 degrees (North through East) ! Clean map min=-0.0027746 max=0.21703 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J2211-1328_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.217034 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376836 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.52089 0.52089 1.04178 2.08356 4.16712 8.33424 16.6685 33.337 66.6739 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.217 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 575.937 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J2211-1328_X_uvs.log closed on Sat Nov 29 16:38:34 2014