! Started logfile: /d2/scr/pima/rv101_uvs/J2205+2926_X_uvs.log on Sat Nov 29 16:38:20 2014 obs /d2/scr/pima/rv101_uvs/J2205+2926_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J2205+2926_X_uva.fits ! AN table 1: 87 integrations on 36 of 36 possible baselines. ! AN table 2: 87 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.786247 visibilities/baseline/integration-bin. ! Found source: J2205+2926 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 15596 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J2205+2926_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009962Jy sigma=19.192231 ! Fit after self-cal, rms=0.924750Jy sigma=17.573888 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8017 mas, bmaj=1.229 mas, bpa=-17.5 degrees ! Estimated noise=0.664288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589616 Jy ! Component: 100 - total flux cleaned = 0.0732719 Jy ! Total flux subtracted in 100 components = 0.0732719 Jy ! Clean residual min=-0.006999 max=0.008225 Jy/beam ! Clean residual mean=-0.000000 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.0732719 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0732719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107869Jy sigma=1.898838 ! Fit after self-cal, rms=0.106647Jy sigma=1.876541 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00990718 Jy ! Component: 100 - total flux cleaned = 0.0158847 Jy ! Total flux subtracted in 100 components = 0.0158847 Jy ! Clean residual min=-0.005551 max=0.006602 Jy/beam ! Clean residual mean=-0.000000 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.0891566 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0891566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105289Jy sigma=1.846391 ! Fit after self-cal, rms=0.105094Jy sigma=1.842392 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.031 mas, bmaj=1.545 mas, bpa=-11.49 degrees ! Estimated noise=0.313098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956741 Jy ! Component: 100 - total flux cleaned = 0.014225 Jy ! Component: 150 - total flux cleaned = 0.0170234 Jy ! Component: 200 - total flux cleaned = 0.0188634 Jy ! Total flux subtracted in 200 components = 0.0188634 Jy ! Clean residual min=-0.003806 max=0.006525 Jy/beam ! Clean residual mean=-0.000003 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.10802 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.10802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104304Jy sigma=1.824497 ! Fit after self-cal, rms=0.103992Jy sigma=1.818579 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441489 Jy ! Component: 100 - total flux cleaned = 0.00481234 Jy ! Component: 150 - total flux cleaned = 0.00503537 Jy ! Component: 200 - total flux cleaned = 0.00507447 Jy ! Total flux subtracted in 200 components = 0.00507447 Jy ! Clean residual min=-0.003649 max=0.004458 Jy/beam ! Clean residual mean=-0.000004 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.113095 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.113095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103821Jy sigma=1.814660 ! Fit after self-cal, rms=0.103724Jy sigma=1.812963 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.031 x 1.545 at -11.49 degrees (North through East) ! Clean map min=-0.0032852 max=0.079446 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.05 KP 1.00* LA 1.02 ! MK 0.97 NL 1.17 OV 1.02 PT 1.07 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.95 LA 1.08 MK 0.93 ! NL 0.96 OV 0.99 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.00 LA 1.00 MK 1.09 ! NL 0.95 OV 0.96 PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 0.97 KP 1.00* LA 0.98 ! MK 0.99 NL 1.13 OV 1.08 PT 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.90 LA 1.01 MK 1.00 ! NL 1.01 OV 1.02 PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.84 LA 1.00 MK 1.00 ! NL 1.00 OV 0.96 PT 0.93 ! ! ! Fit before self-cal, rms=0.103724Jy sigma=1.812963 ! Fit after self-cal, rms=0.101469Jy sigma=1.809429 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=1.541 mas, bpa=-12.58 degrees ! Estimated noise=0.31054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987197 Jy ! Component: 100 - total flux cleaned = 0.000760162 Jy ! Component: 150 - total flux cleaned = 0.000467008 Jy ! Component: 200 - total flux cleaned = 0.00020031 Jy ! Total flux subtracted in 200 components = 0.00020031 Jy ! Clean residual min=-0.002362 max=0.002705 Jy/beam ! Clean residual mean=-0.000005 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.113295 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.113295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101399Jy sigma=1.808197 ! Fit after self-cal, rms=0.101282Jy sigma=1.806739 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101282Jy sigma=1.806739 ! Fit after self-cal, rms=0.100763Jy sigma=1.805991 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.032 mas, bmaj=1.535 mas, bpa=-12.59 degrees ! Estimated noise=0.309291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515695 Jy ! Component: 100 - total flux cleaned = 0.000256108 Jy ! Component: 150 - total flux cleaned = -4.82737e-05 Jy ! Component: 200 - total flux cleaned = -0.000266145 Jy ! Total flux subtracted in 200 components = -0.000266145 Jy ! Clean residual min=-0.002356 max=0.002403 Jy/beam ! Clean residual mean=-0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.113029 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.113029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100720Jy sigma=1.805380 ! Fit after self-cal, rms=0.100700Jy sigma=1.805020 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284182 Jy ! Component: 100 - total flux cleaned = 0.000144056 Jy ! Component: 150 - total flux cleaned = -2.41901e-05 Jy ! Component: 200 - total flux cleaned = -0.00018608 Jy ! Total flux subtracted in 200 components = -0.00018608 Jy ! Clean residual min=-0.002334 max=0.002404 Jy/beam ! Clean residual mean=-0.000004 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.112843 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.112843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100675Jy sigma=1.804701 ! Fit after self-cal, rms=0.100649Jy sigma=1.804528 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100649Jy sigma=1.804528 ! Fit after self-cal, rms=0.099793Jy sigma=1.803910 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.029 mas, bmaj=1.53 mas, bpa=-12.36 degrees ! Estimated noise=0.307919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188615 Jy ! Component: 100 - total flux cleaned = -2.18984e-05 Jy ! Component: 150 - total flux cleaned = -0.000183225 Jy ! Component: 200 - total flux cleaned = -0.000296635 Jy ! Total flux subtracted in 200 components = -0.000296635 Jy ! Clean residual min=-0.002246 max=0.002364 Jy/beam ! Clean residual mean=-0.000004 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.112546 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.112546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099774Jy sigma=1.803666 ! Fit after self-cal, rms=0.099756Jy sigma=1.803414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.85085e-05 Jy ! Component: 100 - total flux cleaned = -3.17473e-05 Jy ! Component: 150 - total flux cleaned = -0.000170449 Jy ! Component: 200 - total flux cleaned = -0.00026263 Jy ! Total flux subtracted in 200 components = -0.00026263 Jy ! Clean residual min=-0.002273 max=0.002317 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.112283 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.112283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099745Jy sigma=1.803288 ! Fit after self-cal, rms=0.099735Jy sigma=1.803237 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099735Jy sigma=1.803237 ! Fit after self-cal, rms=0.099279Jy sigma=1.803156 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=2.857 mas, bpa=-15.77 degrees ! Estimated noise=0.381835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416693 Jy ! Component: 100 - total flux cleaned = -0.00043934 Jy ! Component: 150 - total flux cleaned = -0.000471207 Jy ! Component: 200 - total flux cleaned = -0.000497199 Jy ! Total flux subtracted in 200 components = -0.000497199 Jy ! Clean residual min=-0.002598 max=0.002917 Jy/beam ! Clean residual mean=-0.000007 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.111786 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.111786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099276Jy sigma=1.803146 ! Fit after self-cal, rms=0.099260Jy sigma=1.802984 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53437e-05 Jy ! Component: 100 - total flux cleaned = -7.82395e-05 Jy ! Component: 150 - total flux cleaned = -0.000105394 Jy ! Component: 200 - total flux cleaned = -0.000127358 Jy ! Total flux subtracted in 200 components = -0.000127358 Jy ! Clean residual min=-0.002571 max=0.002893 Jy/beam ! Clean residual mean=-0.000008 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.111659 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.111659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099259Jy sigma=1.802974 ! Fit after self-cal, rms=0.099259Jy sigma=1.802928 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=1.528 mas, bpa=-12.1 degrees ! Estimated noise=0.306564 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 1.528 at -12.1 degrees (North through East) ! Clean map min=-0.002155 max=0.077044 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=1.223 mas, bpa=-17.78 degrees ! Estimated noise=0.639371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561974 Jy ! Component: 100 - total flux cleaned = 0.0768302 Jy ! Component: 150 - total flux cleaned = 0.0884211 Jy ! Component: 200 - total flux cleaned = 0.0961399 Jy ! Total flux subtracted in 200 components = 0.0961399 Jy ! Clean residual min=-0.005350 max=0.006234 Jy/beam ! Clean residual mean=-0.000000 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.0961399 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0961399 Jy ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=1.528 mas, bpa=-12.1 degrees ! Estimated noise=0.306564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850788 Jy ! Component: 100 - total flux cleaned = 0.0128699 Jy ! Component: 150 - total flux cleaned = 0.0143559 Jy ! Component: 200 - total flux cleaned = 0.0149516 Jy ! Total flux subtracted in 200 components = 0.0149516 Jy ! Clean residual min=-0.002634 max=0.002512 Jy/beam ! Clean residual mean=-0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.111091 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.111091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=2.857 mas, bpa=-15.77 degrees ! Estimated noise=0.381835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118811 Jy ! Component: 100 - total flux cleaned = 0.0012663 Jy ! Component: 150 - total flux cleaned = 0.00135234 Jy ! Component: 200 - total flux cleaned = 0.00137098 Jy ! Total flux subtracted in 200 components = 0.00137098 Jy ! Clean residual min=-0.002613 max=0.002934 Jy/beam ! Clean residual mean=-0.000007 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.112462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66517e-05 Jy ! Component: 100 - total flux cleaned = -4.71445e-05 Jy ! Component: 150 - total flux cleaned = -7.76553e-05 Jy ! Component: 200 - total flux cleaned = -9.22395e-05 Jy ! Total flux subtracted in 200 components = -9.22395e-05 Jy ! Clean residual min=-0.002612 max=0.002912 Jy/beam ! Clean residual mean=-0.000007 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.11237 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.11237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=1.528 mas, bpa=-12.1 degrees ! Estimated noise=0.306564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.05094e-06 Jy ! Component: 100 - total flux cleaned = -8.11361e-05 Jy ! Component: 150 - total flux cleaned = -0.000116082 Jy ! Component: 200 - total flux cleaned = -0.000178316 Jy ! Total flux subtracted in 200 components = -0.000178316 Jy ! Clean residual min=-0.002374 max=0.002427 Jy/beam ! Clean residual mean=-0.000003 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.112192 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.112192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099284Jy sigma=1.803369 ! Fit after self-cal, rms=0.099285Jy sigma=1.803089 wmodel /d2/scr/pima/rv101_uvs/J2205+2926_X_map.mod ! Writing 37 model components to file: /d2/scr/pima/rv101_uvs/J2205+2926_X_map.mod wobs /d2/scr/pima/rv101_uvs/J2205+2926_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J2205+2926_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J2205+2926_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J2205+2926_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521636 Jy ! Component: 100 - total flux cleaned = 0.000926213 Jy ! Component: 150 - total flux cleaned = 0.00111721 Jy ! Component: 200 - total flux cleaned = 0.00111726 Jy ! Component: 250 - total flux cleaned = 0.00111926 Jy ! Component: 300 - total flux cleaned = 0.00122072 Jy ! Component: 350 - total flux cleaned = 0.0011562 Jy ! Component: 400 - total flux cleaned = 0.00118891 Jy ! Component: 450 - total flux cleaned = 0.00121953 Jy ! Component: 500 - total flux cleaned = 0.00124947 Jy ! Component: 550 - total flux cleaned = 0.00124996 Jy ! Component: 600 - total flux cleaned = 0.0013069 Jy ! Component: 650 - total flux cleaned = 0.00127861 Jy ! Component: 700 - total flux cleaned = 0.00138804 Jy ! Component: 750 - total flux cleaned = 0.00138813 Jy ! Component: 800 - total flux cleaned = 0.00149375 Jy ! Component: 850 - total flux cleaned = 0.00151944 Jy ! Component: 900 - total flux cleaned = 0.00156998 Jy ! Component: 950 - total flux cleaned = 0.0016194 Jy ! Component: 1000 - total flux cleaned = 0.00164436 Jy ! Component: 1050 - total flux cleaned = 0.00166863 Jy ! Component: 1100 - total flux cleaned = 0.00178824 Jy ! Component: 1150 - total flux cleaned = 0.00183508 Jy ! Component: 1200 - total flux cleaned = 0.00192746 Jy ! Component: 1250 - total flux cleaned = 0.00199625 Jy ! Component: 1300 - total flux cleaned = 0.0019962 Jy ! Component: 1350 - total flux cleaned = 0.00199665 Jy ! Component: 1400 - total flux cleaned = 0.00199741 Jy ! Component: 1450 - total flux cleaned = 0.00206178 Jy ! Component: 1500 - total flux cleaned = 0.00201914 Jy ! Component: 1550 - total flux cleaned = 0.0020402 Jy ! Component: 1600 - total flux cleaned = 0.00195709 Jy ! Component: 1650 - total flux cleaned = 0.00203926 Jy ! Component: 1700 - total flux cleaned = 0.00207983 Jy ! Component: 1750 - total flux cleaned = 0.0020595 Jy ! Component: 1800 - total flux cleaned = 0.002079 Jy ! Component: 1850 - total flux cleaned = 0.00203956 Jy ! Component: 1900 - total flux cleaned = 0.00198147 Jy ! Component: 1950 - total flux cleaned = 0.00194298 Jy ! Component: 2000 - total flux cleaned = 0.00188584 Jy ! Component: 2050 - total flux cleaned = 0.00182974 Jy ! Component: 2100 - total flux cleaned = 0.00184816 Jy ! Component: 2150 - total flux cleaned = 0.00179257 Jy ! Component: 2200 - total flux cleaned = 0.00170131 Jy ! Component: 2250 - total flux cleaned = 0.00162904 Jy ! Component: 2300 - total flux cleaned = 0.00161108 Jy ! Component: 2350 - total flux cleaned = 0.00155792 Jy ! Component: 2400 - total flux cleaned = 0.00152285 Jy ! Component: 2450 - total flux cleaned = 0.00141805 Jy ! Component: 2500 - total flux cleaned = 0.0013836 Jy ! Component: 2550 - total flux cleaned = 0.00134956 Jy ! Component: 2600 - total flux cleaned = 0.00129877 Jy ! Component: 2650 - total flux cleaned = 0.00126515 Jy ! Component: 2700 - total flux cleaned = 0.00124856 Jy ! Component: 2750 - total flux cleaned = 0.00129809 Jy ! Component: 2800 - total flux cleaned = 0.00124862 Jy ! Component: 2850 - total flux cleaned = 0.00124861 Jy ! Component: 2900 - total flux cleaned = 0.00128105 Jy ! Component: 2950 - total flux cleaned = 0.00124907 Jy ! Component: 3000 - total flux cleaned = 0.001265 Jy ! Component: 3050 - total flux cleaned = 0.00129636 Jy ! Component: 3100 - total flux cleaned = 0.00124911 Jy ! Component: 3150 - total flux cleaned = 0.00129594 Jy ! Component: 3200 - total flux cleaned = 0.00128055 Jy ! Component: 3250 - total flux cleaned = 0.00131123 Jy ! Component: 3300 - total flux cleaned = 0.00126526 Jy ! Component: 3350 - total flux cleaned = 0.00126531 Jy ! Component: 3400 - total flux cleaned = 0.00118994 Jy ! Component: 3450 - total flux cleaned = 0.0012201 Jy ! Component: 3500 - total flux cleaned = 0.00116054 Jy ! Component: 3550 - total flux cleaned = 0.00116045 Jy ! Component: 3600 - total flux cleaned = 0.00116047 Jy ! Component: 3650 - total flux cleaned = 0.0011166 Jy ! Component: 3700 - total flux cleaned = 0.00111656 Jy ! Component: 3750 - total flux cleaned = 0.00107332 Jy ! Component: 3800 - total flux cleaned = 0.0010877 Jy ! Component: 3850 - total flux cleaned = 0.00104472 Jy ! Component: 3900 - total flux cleaned = 0.000988068 Jy ! Component: 3950 - total flux cleaned = 0.00101628 Jy ! Component: 4000 - total flux cleaned = 0.00105831 Jy ! Component: 4050 - total flux cleaned = 0.00100265 Jy ! Total flux subtracted in 4096 components = 0.00101645 Jy ! Clean residual min=-0.000771 max=0.000760 Jy/beam ! Clean residual mean=0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.113208 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 302 components and 0.113208 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J2205+2926_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 1.528 at -12.1 degrees (North through East) ! Clean map min=-0.0014987 max=0.0762 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J2205+2926_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0761999 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.90085 0.90085 1.8017 3.6034 7.2068 14.4136 28.8272 57.6544 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.076 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 333.018 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J2205+2926_X_uvs.log closed on Sat Nov 29 16:38:26 2014