! Started logfile: /d2/scr/pima/rv101_uvs/J2038+5119_S_uvs.log on Sat Nov 29 13:56:25 2014 obs /d2/scr/pima/rv101_uvs/J2038+5119_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J2038+5119_S_uva.fits ! AN table 1: 4 integrations on 3 of 3 possible baselines. ! AN table 2: 4 integrations on 10 of 10 possible baselines. ! AN table 3: 29 integrations on 6 of 6 possible baselines. ! AN table 4: 4 integrations on 45 of 45 possible baselines. ! AN table 5: 2 integrations on 3 of 3 possible baselines. ! AN table 6: 2 integrations on 3 of 3 possible baselines. ! AN table 7: 3 integrations on 3 of 3 possible baselines. ! AN table 8: 2 integrations on 55 of 55 possible baselines. ! AN table 9: 2 integrations on 1 of 1 possible baselines. ! AN table 10: 8 integrations on 10 of 10 possible baselines. ! AN table 11: 9 integrations on 1 of 1 possible baselines. ! AN table 12: 5 integrations on 55 of 55 possible baselines. ! AN table 13: 2 integrations on 3 of 3 possible baselines. ! AN table 14: 18 integrations on 3 of 3 possible baselines. ! AN table 15: 7 integrations on 1 of 1 possible baselines. ! AN table 16: 2 integrations on 10 of 10 possible baselines. ! AN table 17: 5 integrations on 6 of 6 possible baselines. ! AN table 18: 4 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.794444 visibilities/baseline/integration-bin. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3432 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J2038+5119_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 14. ! A total of 14 telescope corrections were flagged in sub-array 15. ! A total of 5 telescope corrections were flagged in sub-array 17. ! A total of 9 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 80 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 54 telescope corrections were flagged in sub-array 14. ! A total of 14 telescope corrections were flagged in sub-array 15. ! A total of 11 telescope corrections were flagged in sub-array 17. ! A total of 9 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 5 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 14. ! A total of 14 telescope corrections were flagged in sub-array 15. ! A total of 5 telescope corrections were flagged in sub-array 17. ! A total of 6 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 52 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 22 telescope corrections were flagged in sub-array 12. ! A total of 42 telescope corrections were flagged in sub-array 14. ! A total of 14 telescope corrections were flagged in sub-array 15. ! A total of 11 telescope corrections were flagged in sub-array 17. ! A total of 9 telescope corrections were flagged in sub-array 18. ! ! Fit before self-cal, rms=1.803049Jy sigma=6.170060 ! Fit after self-cal, rms=0.969662Jy sigma=2.754229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=3.092 mas, bpa=20.45 degrees ! Estimated noise=4.65275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.697495 Jy ! Component: 100 - total flux cleaned = 0.937861 Jy ! Total flux subtracted in 100 components = 0.937861 Jy ! Clean residual min=-0.069065 max=0.245638 Jy/beam ! Clean residual mean=0.000895 rms=0.019453 Jy/beam ! Combined flux in latest and established models = 0.937861 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.937861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.983316Jy sigma=2.537928 ! Fit after self-cal, rms=0.982296Jy sigma=2.535981 ! Inverting map ! Added new window around map position (-4.5, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22703 Jy ! Component: 100 - total flux cleaned = 0.368306 Jy ! Total flux subtracted in 100 components = 0.368306 Jy ! Clean residual min=-0.063897 max=0.120154 Jy/beam ! Clean residual mean=0.000594 rms=0.014576 Jy/beam ! Combined flux in latest and established models = 1.30617 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 1.30617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.885344Jy sigma=1.906325 ! Fit after self-cal, rms=0.868407Jy sigma=1.852813 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130671 Jy ! Component: 100 - total flux cleaned = 0.226636 Jy ! Total flux subtracted in 100 components = 0.226636 Jy ! Clean residual min=-0.046187 max=0.075694 Jy/beam ! Clean residual mean=0.000411 rms=0.011862 Jy/beam ! Combined flux in latest and established models = 1.5328 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 1.5328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.824011Jy sigma=1.546054 ! Fit after self-cal, rms=0.819852Jy sigma=1.531940 ! Inverting map ! Added new window around map position (-3.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09006 Jy ! Component: 100 - total flux cleaned = 0.160123 Jy ! Total flux subtracted in 100 components = 0.160123 Jy ! Clean residual min=-0.042331 max=0.055613 Jy/beam ! Clean residual mean=0.000281 rms=0.010474 Jy/beam ! Combined flux in latest and established models = 1.69293 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 1.69293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.795027Jy sigma=1.360482 ! Fit after self-cal, rms=0.793204Jy sigma=1.355886 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=3.603 mas, bpa=29.5 degrees ! Estimated noise=3.98625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0958067 Jy ! Component: 100 - total flux cleaned = 0.163382 Jy ! Component: 150 - total flux cleaned = 0.214554 Jy ! Component: 200 - total flux cleaned = 0.25366 Jy ! Total flux subtracted in 200 components = 0.25366 Jy ! Clean residual min=-0.037616 max=0.050559 Jy/beam ! Clean residual mean=0.000066 rms=0.009859 Jy/beam ! Combined flux in latest and established models = 1.94659 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 71 components and 1.94659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.764166Jy sigma=1.205072 ! Fit after self-cal, rms=0.762471Jy sigma=1.198359 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 3.603 at 29.5 degrees (North through East) ! Clean map min=-0.034612 max=0.91366 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! SC 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* LA 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* OV 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! SC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* LA 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! SC 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* LA 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* SC 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* OV 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! SC 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* LA 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! NY 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MK 0.00* NY 0.00* OV 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! MA 0.00* MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! ! Fit before self-cal, rms=0.762471Jy sigma=1.198359 ! Fit after self-cal, rms=0.594804Jy sigma=1.184350 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.735 mas, bpa=30.47 degrees ! Estimated noise=4.13207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586386 Jy ! Component: 100 - total flux cleaned = 0.0940227 Jy ! Component: 150 - total flux cleaned = 0.117986 Jy ! Component: 200 - total flux cleaned = 0.128847 Jy ! Total flux subtracted in 200 components = 0.128847 Jy ! Clean residual min=-0.035436 max=0.039286 Jy/beam ! Clean residual mean=-0.001797 rms=0.009039 Jy/beam ! Combined flux in latest and established models = 2.07543 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 2.07543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.584390Jy sigma=1.127946 ! Fit after self-cal, rms=0.584024Jy sigma=1.120002 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.584024Jy sigma=1.120002 ! Fit after self-cal, rms=0.584024Jy sigma=1.120002 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.735 mas, bpa=30.47 degrees ! Estimated noise=4.13207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230857 Jy ! Component: 100 - total flux cleaned = 0.0335777 Jy ! Component: 150 - total flux cleaned = 0.0412584 Jy ! Component: 200 - total flux cleaned = 0.0468666 Jy ! Total flux subtracted in 200 components = 0.0468666 Jy ! Clean residual min=-0.037226 max=0.036083 Jy/beam ! Clean residual mean=-0.002473 rms=0.008796 Jy/beam ! Combined flux in latest and established models = 2.1223 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 2.1223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580597Jy sigma=1.110880 ! Fit after self-cal, rms=0.580771Jy sigma=1.109466 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796363 Jy ! Component: 100 - total flux cleaned = 0.0117751 Jy ! Component: 150 - total flux cleaned = 0.014303 Jy ! Component: 200 - total flux cleaned = 0.0162114 Jy ! Total flux subtracted in 200 components = 0.0162114 Jy ! Clean residual min=-0.037697 max=0.035132 Jy/beam ! Clean residual mean=-0.002707 rms=0.008709 Jy/beam ! Combined flux in latest and established models = 2.13851 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 2.13851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579369Jy sigma=1.105976 ! Fit after self-cal, rms=0.579522Jy sigma=1.105454 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579522Jy sigma=1.105454 ! Fit after self-cal, rms=0.579522Jy sigma=1.105454 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.735 mas, bpa=30.47 degrees ! Estimated noise=4.13207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316352 Jy ! Component: 100 - total flux cleaned = 0.00536581 Jy ! Component: 150 - total flux cleaned = 0.00670168 Jy ! Component: 200 - total flux cleaned = 0.00764618 Jy ! Total flux subtracted in 200 components = 0.00764618 Jy ! Clean residual min=-0.037925 max=0.034841 Jy/beam ! Clean residual mean=-0.002817 rms=0.008658 Jy/beam ! Combined flux in latest and established models = 2.14616 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 2.14616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578756Jy sigma=1.103286 ! Fit after self-cal, rms=0.578902Jy sigma=1.103048 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218023 Jy ! Component: 100 - total flux cleaned = 0.00368034 Jy ! Component: 150 - total flux cleaned = 0.00452589 Jy ! Component: 200 - total flux cleaned = 0.00560568 Jy ! Total flux subtracted in 200 components = 0.00560568 Jy ! Clean residual min=-0.038077 max=0.034674 Jy/beam ! Clean residual mean=-0.002898 rms=0.008624 Jy/beam ! Combined flux in latest and established models = 2.15176 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 2.15176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578401Jy sigma=1.101616 ! Fit after self-cal, rms=0.578525Jy sigma=1.101490 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578525Jy sigma=1.101490 ! Fit after self-cal, rms=0.578525Jy sigma=1.101490 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=9.8 mas, bpa=50.87 degrees ! Estimated noise=5.92748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215737 Jy ! Component: 100 - total flux cleaned = 0.0230063 Jy ! Component: 150 - total flux cleaned = 0.0233489 Jy ! Component: 200 - total flux cleaned = 0.0239291 Jy ! Total flux subtracted in 200 components = 0.0239291 Jy ! Clean residual min=-0.059460 max=0.052369 Jy/beam ! Clean residual mean=-0.009841 rms=0.016169 Jy/beam ! Combined flux in latest and established models = 2.17569 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 131 components and 2.17569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578240Jy sigma=1.106391 ! Fit after self-cal, rms=0.578395Jy sigma=1.105600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223618 Jy ! Component: 100 - total flux cleaned = 0.00341478 Jy ! Component: 150 - total flux cleaned = 0.0041215 Jy ! Component: 200 - total flux cleaned = 0.00452399 Jy ! Total flux subtracted in 200 components = 0.00452399 Jy ! Clean residual min=-0.059860 max=0.052226 Jy/beam ! Clean residual mean=-0.010044 rms=0.016120 Jy/beam ! Combined flux in latest and established models = 2.18022 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 135 components and 2.18022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578489Jy sigma=1.109384 ! Fit after self-cal, rms=0.578611Jy sigma=1.108997 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.735 mas, bpa=30.47 degrees ! Estimated noise=4.13207 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 3.735 at 30.47 degrees (North through East) ! Clean map min=-0.036885 max=0.90187 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578611Jy sigma=1.108997 ! Fit after self-cal, rms=0.578417Jy sigma=1.106611 ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.734 mas, bpa=30.46 degrees ! Estimated noise=4.1348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00984245 Jy ! Component: 100 - total flux cleaned = -0.00900023 Jy ! Component: 150 - total flux cleaned = -0.00966271 Jy ! Component: 200 - total flux cleaned = -0.0108566 Jy ! Total flux subtracted in 200 components = -0.0108566 Jy ! Clean residual min=-0.038471 max=0.036235 Jy/beam ! Clean residual mean=-0.003149 rms=0.008551 Jy/beam ! Combined flux in latest and established models = 2.16936 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 147 components and 2.16936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578116Jy sigma=1.099269 ! Fit after self-cal, rms=0.577941Jy sigma=1.098996 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620379 Jy ! Component: 100 - total flux cleaned = -0.00115077 Jy ! Component: 150 - total flux cleaned = -0.0011523 Jy ! Component: 200 - total flux cleaned = -0.00138933 Jy ! Total flux subtracted in 200 components = -0.00138933 Jy ! Clean residual min=-0.038207 max=0.035406 Jy/beam ! Clean residual mean=-0.003127 rms=0.008532 Jy/beam ! Combined flux in latest and established models = 2.16797 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 151 components and 2.16797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577619Jy sigma=1.097426 ! Fit after self-cal, rms=0.577593Jy sigma=1.097374 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577593Jy sigma=1.097374 ! Fit after self-cal, rms=0.577592Jy sigma=1.097369 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=3.164 mas, bpa=18.98 degrees ! Estimated noise=5.01106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.718266 Jy ! Component: 100 - total flux cleaned = 1.03228 Jy ! Component: 150 - total flux cleaned = 1.23384 Jy ! Component: 200 - total flux cleaned = 1.38425 Jy ! Total flux subtracted in 200 components = 1.38425 Jy ! Clean residual min=-0.048006 max=0.087443 Jy/beam ! Clean residual mean=0.000608 rms=0.013561 Jy/beam ! Combined flux in latest and established models = 1.38425 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 1.38425 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.734 mas, bpa=30.46 degrees ! Estimated noise=4.13486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177734 Jy ! Component: 100 - total flux cleaned = 0.306286 Jy ! Component: 150 - total flux cleaned = 0.404017 Jy ! Component: 200 - total flux cleaned = 0.479934 Jy ! Total flux subtracted in 200 components = 0.479934 Jy ! Clean residual min=-0.034974 max=0.047864 Jy/beam ! Clean residual mean=0.001290 rms=0.010354 Jy/beam ! Combined flux in latest and established models = 1.86418 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 108 components and 1.86418 Jy ! Inverting map ! Added new window around map position (3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602381 Jy ! Component: 100 - total flux cleaned = 0.107798 Jy ! Component: 150 - total flux cleaned = 0.145742 Jy ! Component: 200 - total flux cleaned = 0.176639 Jy ! Total flux subtracted in 200 components = 0.176639 Jy ! Clean residual min=-0.033286 max=0.042020 Jy/beam ! Clean residual mean=-0.001280 rms=0.008967 Jy/beam ! Combined flux in latest and established models = 2.04082 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 143 components and 2.04082 Jy ! Inverting map ! Added new window around map position (-24, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403631 Jy ! Component: 100 - total flux cleaned = 0.0662682 Jy ! Component: 150 - total flux cleaned = 0.0856418 Jy ! Component: 200 - total flux cleaned = 0.0980848 Jy ! Total flux subtracted in 200 components = 0.0980848 Jy ! Clean residual min=-0.033262 max=0.030814 Jy/beam ! Clean residual mean=-0.002657 rms=0.008355 Jy/beam ! Combined flux in latest and established models = 2.13891 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 177 components and 2.13891 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.836 mas, bmaj=9.797 mas, bpa=50.9 degrees ! Estimated noise=5.93278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383628 Jy ! Component: 100 - total flux cleaned = 0.053416 Jy ! Component: 150 - total flux cleaned = 0.0604565 Jy ! Component: 200 - total flux cleaned = 0.0651158 Jy ! Total flux subtracted in 200 components = 0.0651158 Jy ! Clean residual min=-0.056687 max=0.046826 Jy/beam ! Clean residual mean=-0.010922 rms=0.015196 Jy/beam ! Combined flux in latest and established models = 2.20402 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102718 Jy ! Component: 100 - total flux cleaned = 0.00197312 Jy ! Component: 150 - total flux cleaned = 0.00281817 Jy ! Component: 200 - total flux cleaned = 0.00320985 Jy ! Total flux subtracted in 200 components = 0.00320985 Jy ! Clean residual min=-0.056153 max=0.046347 Jy/beam ! Clean residual mean=-0.011062 rms=0.015022 Jy/beam ! Combined flux in latest and established models = 2.20723 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 203 components and 2.20723 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=3.734 mas, bpa=30.46 degrees ! Estimated noise=4.13486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117508 Jy ! Component: 100 - total flux cleaned = -0.0134896 Jy ! Component: 150 - total flux cleaned = -0.0156054 Jy ! Component: 200 - total flux cleaned = -0.0151406 Jy ! Total flux subtracted in 200 components = -0.0151406 Jy ! Clean residual min=-0.035243 max=0.028269 Jy/beam ! Clean residual mean=-0.003424 rms=0.008048 Jy/beam ! Combined flux in latest and established models = 2.19209 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 221 components and 2.19209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.574302Jy sigma=1.069472 ! Fit after self-cal, rms=0.573917Jy sigma=1.065466 wmodel /d2/scr/pima/rv101_uvs/J2038+5119_S_map.mod ! Writing 221 model components to file: /d2/scr/pima/rv101_uvs/J2038+5119_S_map.mod wobs /d2/scr/pima/rv101_uvs/J2038+5119_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J2038+5119_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J2038+5119_S_map.win ! wwins: Wrote 6 windows to /d2/scr/pima/rv101_uvs/J2038+5119_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0155876 Jy ! Component: 100 - total flux cleaned = -0.0276797 Jy ! Component: 150 - total flux cleaned = -0.0381253 Jy ! Component: 200 - total flux cleaned = -0.0461239 Jy ! Component: 250 - total flux cleaned = -0.0544531 Jy ! Component: 300 - total flux cleaned = -0.0625852 Jy ! Component: 350 - total flux cleaned = -0.0710351 Jy ! Component: 400 - total flux cleaned = -0.0788251 Jy ! Component: 450 - total flux cleaned = -0.085984 Jy ! Component: 500 - total flux cleaned = -0.0930113 Jy ! Component: 550 - total flux cleaned = -0.0999152 Jy ! Component: 600 - total flux cleaned = -0.106246 Jy ! Component: 650 - total flux cleaned = -0.112478 Jy ! Component: 700 - total flux cleaned = -0.119048 Jy ! Component: 750 - total flux cleaned = -0.124655 Jy ! Component: 800 - total flux cleaned = -0.130183 Jy ! Component: 850 - total flux cleaned = -0.134801 Jy ! Component: 900 - total flux cleaned = -0.139361 Jy ! Component: 950 - total flux cleaned = -0.143459 Jy ! Component: 1000 - total flux cleaned = -0.146297 Jy ! Component: 1050 - total flux cleaned = -0.151507 Jy ! Component: 1100 - total flux cleaned = -0.154674 Jy ! Component: 1150 - total flux cleaned = -0.158592 Jy ! Component: 1200 - total flux cleaned = -0.161692 Jy ! Component: 1250 - total flux cleaned = -0.165524 Jy ! Component: 1300 - total flux cleaned = -0.169316 Jy ! Component: 1350 - total flux cleaned = -0.17269 Jy ! Component: 1400 - total flux cleaned = -0.175661 Jy ! Component: 1450 - total flux cleaned = -0.1786 Jy ! Component: 1500 - total flux cleaned = -0.18115 Jy ! Component: 1550 - total flux cleaned = -0.184397 Jy ! Component: 1600 - total flux cleaned = -0.186894 Jy ! Component: 1650 - total flux cleaned = -0.189369 Jy ! Component: 1700 - total flux cleaned = -0.191474 Jy ! Component: 1750 - total flux cleaned = -0.193564 Jy ! Component: 1800 - total flux cleaned = -0.195634 Jy ! Component: 1850 - total flux cleaned = -0.198374 Jy ! Component: 1900 - total flux cleaned = -0.200071 Jy ! Component: 1950 - total flux cleaned = -0.201752 Jy ! Component: 2000 - total flux cleaned = -0.203756 Jy ! Component: 2050 - total flux cleaned = -0.20508 Jy ! Component: 2100 - total flux cleaned = -0.206723 Jy ! Component: 2150 - total flux cleaned = -0.208682 Jy ! Component: 2200 - total flux cleaned = -0.210624 Jy ! Component: 2250 - total flux cleaned = -0.211908 Jy ! Component: 2300 - total flux cleaned = -0.213502 Jy ! Component: 2350 - total flux cleaned = -0.214766 Jy ! Component: 2400 - total flux cleaned = -0.216336 Jy ! Component: 2450 - total flux cleaned = -0.218209 Jy ! Component: 2500 - total flux cleaned = -0.21945 Jy ! Component: 2550 - total flux cleaned = -0.220991 Jy ! Component: 2600 - total flux cleaned = -0.221909 Jy ! Component: 2650 - total flux cleaned = -0.223733 Jy ! Component: 2700 - total flux cleaned = -0.224942 Jy ! Component: 2750 - total flux cleaned = -0.225542 Jy ! Component: 2800 - total flux cleaned = -0.227331 Jy ! Component: 2850 - total flux cleaned = -0.228814 Jy ! Component: 2900 - total flux cleaned = -0.229696 Jy ! Component: 2950 - total flux cleaned = -0.230283 Jy ! Component: 3000 - total flux cleaned = -0.231446 Jy ! Component: 3050 - total flux cleaned = -0.232316 Jy ! Component: 3100 - total flux cleaned = -0.234042 Jy ! Component: 3150 - total flux cleaned = -0.234327 Jy ! Component: 3200 - total flux cleaned = -0.235749 Jy ! Component: 3250 - total flux cleaned = -0.236032 Jy ! Component: 3300 - total flux cleaned = -0.238281 Jy ! Component: 3350 - total flux cleaned = -0.238559 Jy ! Component: 3400 - total flux cleaned = -0.239394 Jy ! Component: 3450 - total flux cleaned = -0.240222 Jy ! Component: 3500 - total flux cleaned = -0.241871 Jy ! Component: 3550 - total flux cleaned = -0.242143 Jy ! Component: 3600 - total flux cleaned = -0.243502 Jy ! Component: 3650 - total flux cleaned = -0.243773 Jy ! Component: 3700 - total flux cleaned = -0.245119 Jy ! Component: 3750 - total flux cleaned = -0.245386 Jy ! Component: 3800 - total flux cleaned = -0.246186 Jy ! Component: 3850 - total flux cleaned = -0.247247 Jy ! Component: 3900 - total flux cleaned = -0.247509 Jy ! Component: 3950 - total flux cleaned = -0.248558 Jy ! Component: 4000 - total flux cleaned = -0.248558 Jy ! Component: 4050 - total flux cleaned = -0.249338 Jy ! Total flux subtracted in 4096 components = -0.250374 Jy ! Clean residual min=-0.014589 max=0.013453 Jy/beam ! Clean residual mean=-0.000881 rms=0.004846 Jy/beam ! Combined flux in latest and established models = 1.94172 Jy keep ! Adding 354 model components to the UV plane model. ! The established model now contains 574 components and 1.94172 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J2038+5119_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 3.734 at 30.46 degrees (North through East) ! Clean map min=-0.026377 max=0.9179 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J2038+5119_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.917898 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0048494 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.58495 1.58495 3.1699 6.3398 12.6796 25.3592 50.7184 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0145 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.917 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 189.28 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J2038+5119_S_uvs.log closed on Sat Nov 29 13:56:30 2014