! Started logfile: /d2/scr/pima/rv101_uvs/J1929+2543_X_uvs.log on Sat Nov 29 16:37:01 2014 obs /d2/scr/pima/rv101_uvs/J1929+2543_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1929+2543_X_uva.fits ! AN table 1: 87 integrations on 36 of 36 possible baselines. ! AN table 2: 87 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.965292 visibilities/baseline/integration-bin. ! Found source: J1929+2543 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 17132 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1929+2543_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.019716Jy sigma=18.690573 ! Fit after self-cal, rms=0.800984Jy sigma=14.591541 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7603 mas, bmaj=1.994 mas, bpa=19.83 degrees ! Estimated noise=0.844307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155578 Jy ! Component: 100 - total flux cleaned = 0.190849 Jy ! Total flux subtracted in 100 components = 0.190849 Jy ! Clean residual min=-0.010096 max=0.013300 Jy/beam ! Clean residual mean=-0.000009 rms=0.002665 Jy/beam ! Combined flux in latest and established models = 0.190849 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.190849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110857Jy sigma=1.930146 ! Fit after self-cal, rms=0.110853Jy sigma=1.929585 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=2.184 mas, bpa=18.74 degrees ! Estimated noise=0.343393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205113 Jy ! Component: 100 - total flux cleaned = 0.0314349 Jy ! Component: 150 - total flux cleaned = 0.0379346 Jy ! Component: 200 - total flux cleaned = 0.0419317 Jy ! Total flux subtracted in 200 components = 0.0419317 Jy ! Clean residual min=-0.004439 max=0.005176 Jy/beam ! Clean residual mean=-0.000015 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.23278 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.23278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107433Jy sigma=1.850667 ! Fit after self-cal, rms=0.107421Jy sigma=1.849330 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 2.184 at 18.74 degrees (North through East) ! Clean map min=-0.0040298 max=0.20833 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.98 KP 1.00* LA 1.00 ! MK 1.01 NL 0.98 OV 0.95 PT 1.01 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.04 KP 1.00* LA 0.99 ! NL 1.00 OV 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.01 KP 1.00* LA 0.97 ! MK 1.06 NL 0.99 OV 0.94 PT 0.90 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.02 KP 1.00* LA 0.99 ! NL 0.99 OV 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.05 KP 1.00* LA 1.04 ! MK 1.04 NL 1.02 OV 1.01 PT 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.00 KP 1.00* LA 1.05 ! NL 1.06 OV 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.02 KP 1.00* LA 1.01 ! MK 1.05 NL 1.02 OV 0.99 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.03 KP 1.00* LA 1.01 ! NL 1.08 OV 0.96 ! ! ! Fit before self-cal, rms=0.107421Jy sigma=1.849330 ! Fit after self-cal, rms=0.108038Jy sigma=1.836632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.198 mas, bpa=18.74 degrees ! Estimated noise=0.342484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365271 Jy ! Component: 100 - total flux cleaned = 0.00468453 Jy ! Component: 150 - total flux cleaned = 0.00477478 Jy ! Component: 200 - total flux cleaned = 0.00491977 Jy ! Total flux subtracted in 200 components = 0.00491977 Jy ! Clean residual min=-0.002814 max=0.002596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.2377 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.2377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107917Jy sigma=1.834212 ! Fit after self-cal, rms=0.107938Jy sigma=1.833755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107938Jy sigma=1.833755 ! Fit after self-cal, rms=0.107798Jy sigma=1.833492 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.198 mas, bpa=18.77 degrees ! Estimated noise=0.341896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170776 Jy ! Component: 100 - total flux cleaned = 0.00209064 Jy ! Component: 150 - total flux cleaned = 0.00224795 Jy ! Component: 200 - total flux cleaned = 0.0022723 Jy ! Total flux subtracted in 200 components = 0.0022723 Jy ! Clean residual min=-0.002654 max=0.002433 Jy/beam ! Clean residual mean=-0.000000 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.239972 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.239972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107765Jy sigma=1.832907 ! Fit after self-cal, rms=0.107763Jy sigma=1.832828 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285789 Jy ! Component: 100 - total flux cleaned = 0.000407734 Jy ! Component: 150 - total flux cleaned = 0.000491338 Jy ! Component: 200 - total flux cleaned = 0.000472827 Jy ! Total flux subtracted in 200 components = 0.000472827 Jy ! Clean residual min=-0.002673 max=0.002432 Jy/beam ! Clean residual mean=0.000000 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.240445 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.240445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107753Jy sigma=1.832673 ! Fit after self-cal, rms=0.107753Jy sigma=1.832654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107753Jy sigma=1.832654 ! Fit after self-cal, rms=0.107788Jy sigma=1.832492 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.2 mas, bpa=18.79 degrees ! Estimated noise=0.34173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908007 Jy ! Component: 100 - total flux cleaned = 0.00105701 Jy ! Component: 150 - total flux cleaned = 0.00101974 Jy ! Component: 200 - total flux cleaned = 0.0010025 Jy ! Total flux subtracted in 200 components = 0.0010025 Jy ! Clean residual min=-0.002617 max=0.002418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.241448 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.241448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107778Jy sigma=1.832331 ! Fit after self-cal, rms=0.107780Jy sigma=1.832308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127827 Jy ! Component: 100 - total flux cleaned = 0.000143528 Jy ! Component: 150 - total flux cleaned = 0.000131727 Jy ! Component: 200 - total flux cleaned = 9.79594e-05 Jy ! Total flux subtracted in 200 components = 9.79594e-05 Jy ! Clean residual min=-0.002618 max=0.002405 Jy/beam ! Clean residual mean=0.000000 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.241546 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.241546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107776Jy sigma=1.832258 ! Fit after self-cal, rms=0.107775Jy sigma=1.832251 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107775Jy sigma=1.832251 ! Fit after self-cal, rms=0.107804Jy sigma=1.832182 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.132 mas, bmaj=2.928 mas, bpa=-4.555 degrees ! Estimated noise=0.399526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715813 Jy ! Component: 100 - total flux cleaned = 0.000777677 Jy ! Component: 150 - total flux cleaned = 0.000764253 Jy ! Component: 200 - total flux cleaned = 0.00075385 Jy ! Total flux subtracted in 200 components = 0.00075385 Jy ! Clean residual min=-0.002071 max=0.001912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.242299 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.242299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107801Jy sigma=1.832157 ! Fit after self-cal, rms=0.107801Jy sigma=1.832146 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.40796e-05 Jy ! Component: 100 - total flux cleaned = 5.63069e-06 Jy ! Component: 150 - total flux cleaned = -2.54512e-05 Jy ! Component: 200 - total flux cleaned = -3.28345e-05 Jy ! Total flux subtracted in 200 components = -3.28345e-05 Jy ! Clean residual min=-0.002052 max=0.001860 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.242267 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 0.242267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107801Jy sigma=1.832147 ! Fit after self-cal, rms=0.107799Jy sigma=1.832145 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.201 mas, bpa=18.8 degrees ! Estimated noise=0.341617 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 2.201 at 18.8 degrees (North through East) ! Clean map min=-0.0024573 max=0.20757 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7669 mas, bmaj=2.007 mas, bpa=19.96 degrees ! Estimated noise=0.849569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156336 Jy ! Component: 100 - total flux cleaned = 0.191726 Jy ! Component: 150 - total flux cleaned = 0.206717 Jy ! Component: 200 - total flux cleaned = 0.216476 Jy ! Total flux subtracted in 200 components = 0.216476 Jy ! Clean residual min=-0.008222 max=0.007699 Jy/beam ! Clean residual mean=-0.000004 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 0.216476 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.216476 Jy ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.201 mas, bpa=18.8 degrees ! Estimated noise=0.341617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826192 Jy ! Component: 100 - total flux cleaned = 0.013261 Jy ! Component: 150 - total flux cleaned = 0.0166135 Jy ! Component: 200 - total flux cleaned = 0.0189869 Jy ! Total flux subtracted in 200 components = 0.0189869 Jy ! Clean residual min=-0.002703 max=0.002657 Jy/beam ! Clean residual mean=-0.000003 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.235463 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 53 components and 0.235463 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.132 mas, bmaj=2.928 mas, bpa=-4.555 degrees ! Estimated noise=0.399526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245693 Jy ! Component: 100 - total flux cleaned = 0.00391691 Jy ! Component: 150 - total flux cleaned = 0.00496098 Jy ! Component: 200 - total flux cleaned = 0.00573006 Jy ! Total flux subtracted in 200 components = 0.00573006 Jy ! Clean residual min=-0.002372 max=0.001778 Jy/beam ! Clean residual mean=-0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.241193 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570057 Jy ! Component: 100 - total flux cleaned = 0.000995543 Jy ! Component: 150 - total flux cleaned = 0.00119671 Jy ! Component: 200 - total flux cleaned = 0.00130898 Jy ! Total flux subtracted in 200 components = 0.00130898 Jy ! Clean residual min=-0.002238 max=0.001903 Jy/beam ! Clean residual mean=-0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.242502 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 90 components and 0.242502 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.201 mas, bpa=18.8 degrees ! Estimated noise=0.341617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.24635e-06 Jy ! Component: 100 - total flux cleaned = 4.07199e-06 Jy ! Component: 150 - total flux cleaned = 5.16094e-05 Jy ! Component: 200 - total flux cleaned = 9.52196e-05 Jy ! Total flux subtracted in 200 components = 9.52196e-05 Jy ! Clean residual min=-0.002571 max=0.002396 Jy/beam ! Clean residual mean=0.000000 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.242597 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.242597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107814Jy sigma=1.832355 ! Fit after self-cal, rms=0.107806Jy sigma=1.832336 wmodel /d2/scr/pima/rv101_uvs/J1929+2543_X_map.mod ! Writing 110 model components to file: /d2/scr/pima/rv101_uvs/J1929+2543_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1929+2543_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1929+2543_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1929+2543_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1929+2543_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461535 Jy ! Component: 100 - total flux cleaned = -0.00070759 Jy ! Component: 150 - total flux cleaned = -0.000938696 Jy ! Component: 200 - total flux cleaned = -0.00122956 Jy ! Component: 250 - total flux cleaned = -0.00147289 Jy ! Component: 300 - total flux cleaned = -0.00157256 Jy ! Component: 350 - total flux cleaned = -0.0015398 Jy ! Component: 400 - total flux cleaned = -0.00147651 Jy ! Component: 450 - total flux cleaned = -0.00147642 Jy ! Component: 500 - total flux cleaned = -0.00156632 Jy ! Component: 550 - total flux cleaned = -0.00162393 Jy ! Component: 600 - total flux cleaned = -0.00162359 Jy ! Component: 650 - total flux cleaned = -0.00167899 Jy ! Component: 700 - total flux cleaned = -0.00176083 Jy ! Component: 750 - total flux cleaned = -0.00189508 Jy ! Component: 800 - total flux cleaned = -0.00202693 Jy ! Component: 850 - total flux cleaned = -0.00220802 Jy ! Component: 900 - total flux cleaned = -0.00233502 Jy ! Component: 950 - total flux cleaned = -0.00241017 Jy ! Component: 1000 - total flux cleaned = -0.00245944 Jy ! Component: 1050 - total flux cleaned = -0.00250804 Jy ! Component: 1100 - total flux cleaned = -0.00255558 Jy ! Component: 1150 - total flux cleaned = -0.00262579 Jy ! Component: 1200 - total flux cleaned = -0.00260252 Jy ! Component: 1250 - total flux cleaned = -0.00255685 Jy ! Component: 1300 - total flux cleaned = -0.00255667 Jy ! Component: 1350 - total flux cleaned = -0.00251203 Jy ! Component: 1400 - total flux cleaned = -0.00251208 Jy ! Component: 1450 - total flux cleaned = -0.00253372 Jy ! Component: 1500 - total flux cleaned = -0.00249125 Jy ! Component: 1550 - total flux cleaned = -0.00251209 Jy ! Component: 1600 - total flux cleaned = -0.00253262 Jy ! Component: 1650 - total flux cleaned = -0.00242916 Jy ! Component: 1700 - total flux cleaned = -0.00249057 Jy ! Component: 1750 - total flux cleaned = -0.0025713 Jy ! Component: 1800 - total flux cleaned = -0.00263113 Jy ! Component: 1850 - total flux cleaned = -0.00259159 Jy ! Component: 1900 - total flux cleaned = -0.00267006 Jy ! Component: 1950 - total flux cleaned = -0.00276696 Jy ! Component: 2000 - total flux cleaned = -0.0027862 Jy ! Component: 2050 - total flux cleaned = -0.00282405 Jy ! Component: 2100 - total flux cleaned = -0.00288071 Jy ! Component: 2150 - total flux cleaned = -0.00297387 Jy ! Component: 2200 - total flux cleaned = -0.00301082 Jy ! Component: 2250 - total flux cleaned = -0.00301074 Jy ! Component: 2300 - total flux cleaned = -0.0029746 Jy ! Component: 2350 - total flux cleaned = -0.00306475 Jy ! Component: 2400 - total flux cleaned = -0.00306469 Jy ! Component: 2450 - total flux cleaned = -0.00306464 Jy ! Component: 2500 - total flux cleaned = -0.00308204 Jy ! Component: 2550 - total flux cleaned = -0.00301224 Jy ! Component: 2600 - total flux cleaned = -0.00301212 Jy ! Component: 2650 - total flux cleaned = -0.00299493 Jy ! Component: 2700 - total flux cleaned = -0.00297787 Jy ! Component: 2750 - total flux cleaned = -0.00296104 Jy ! Component: 2800 - total flux cleaned = -0.0030282 Jy ! Component: 2850 - total flux cleaned = -0.00296168 Jy ! Component: 2900 - total flux cleaned = -0.00299481 Jy ! Component: 2950 - total flux cleaned = -0.00294544 Jy ! Component: 3000 - total flux cleaned = -0.00296181 Jy ! Component: 3050 - total flux cleaned = -0.0029619 Jy ! Component: 3100 - total flux cleaned = -0.00294576 Jy ! Component: 3150 - total flux cleaned = -0.00300973 Jy ! Component: 3200 - total flux cleaned = -0.00299372 Jy ! Component: 3250 - total flux cleaned = -0.00304117 Jy ! Component: 3300 - total flux cleaned = -0.00305686 Jy ! Component: 3350 - total flux cleaned = -0.00307245 Jy ! Component: 3400 - total flux cleaned = -0.00313458 Jy ! Component: 3450 - total flux cleaned = -0.00316531 Jy ! Component: 3500 - total flux cleaned = -0.00321115 Jy ! Component: 3550 - total flux cleaned = -0.00315018 Jy ! Component: 3600 - total flux cleaned = -0.00312004 Jy ! Component: 3650 - total flux cleaned = -0.00318039 Jy ! Component: 3700 - total flux cleaned = -0.00316542 Jy ! Component: 3750 - total flux cleaned = -0.00316542 Jy ! Component: 3800 - total flux cleaned = -0.00318024 Jy ! Component: 3850 - total flux cleaned = -0.00318036 Jy ! Component: 3900 - total flux cleaned = -0.00316567 Jy ! Component: 3950 - total flux cleaned = -0.00316576 Jy ! Component: 4000 - total flux cleaned = -0.00319462 Jy ! Component: 4050 - total flux cleaned = -0.00322353 Jy ! Total flux subtracted in 4096 components = -0.0032235 Jy ! Clean residual min=-0.000868 max=0.000924 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.239374 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 365 components and 0.239374 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1929+2543_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 2.201 at 18.8 degrees (North through East) ! Clean map min=-0.0017908 max=0.20763 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1929+2543_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343693 0.343693 0.687386 1.37477 2.74954 5.49909 10.9982 21.9964 43.9927 87.9854 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.207 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 872.872 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1929+2543_X_uvs.log closed on Sat Nov 29 16:37:06 2014