! Started logfile: /d2/scr/pima/rv101_uvs/J1827-0405_S_uvs.log on Sat Nov 29 13:55:51 2014
obs /d2/scr/pima/rv101_uvs/J1827-0405_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1827-0405_S_uva.fits
! AN table 1: 44 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.784091 visibilities/baseline/integration-bin.
! Found source: J1827-0405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1827-0405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.040269Jy  sigma=15.914640
! Fit after  self-cal, rms=0.745180Jy  sigma=11.342331
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.536 mas, bmaj=8.635 mas, bpa=8.05 degrees
! Estimated noise=1.09528 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190006 Jy
! Component: 100  -  total flux cleaned = 0.289011 Jy
! Total flux subtracted in 100 components = 0.289011 Jy
! Clean residual min=-0.021614 max=0.052127 Jy/beam
! Clean residual mean=0.000072 rms=0.008143 Jy/beam
! Combined flux in latest and established models = 0.289011 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.289011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166424Jy  sigma=2.388358
! Fit after  self-cal, rms=0.165580Jy  sigma=2.377614
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0631157 Jy
! Component: 100  -  total flux cleaned = 0.105177 Jy
! Total flux subtracted in 100 components = 0.105177 Jy
! Clean residual min=-0.014147 max=0.029286 Jy/beam
! Clean residual mean=0.000056 rms=0.004905 Jy/beam
! Combined flux in latest and established models = 0.394188 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 57 components and 0.394188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116233Jy  sigma=1.604682
! Fit after  self-cal, rms=0.115780Jy  sigma=1.598650
! Inverting map 
! Added new window around map position (5.5, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327785 Jy
! Component: 100  -  total flux cleaned = 0.0562116 Jy
! Total flux subtracted in 100 components = 0.0562116 Jy
! Clean residual min=-0.010688 max=0.015438 Jy/beam
! Clean residual mean=0.000044 rms=0.003444 Jy/beam
! Combined flux in latest and established models = 0.4504 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 86 components and 0.4504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096631Jy  sigma=1.323424
! Fit after  self-cal, rms=0.096310Jy  sigma=1.319394
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.33 mas, bmaj=10.16 mas, bpa=5.341 degrees
! Estimated noise=0.677264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290924 Jy
! Component: 100  -  total flux cleaned = 0.0473871 Jy
! Component: 150  -  total flux cleaned = 0.0594271 Jy
! Component: 200  -  total flux cleaned = 0.0675064 Jy
! Total flux subtracted in 200 components = 0.0675064 Jy
! Clean residual min=-0.008459 max=0.012783 Jy/beam
! Clean residual mean=0.000077 rms=0.003116 Jy/beam
! Combined flux in latest and established models = 0.517906 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 131 components and 0.517906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083259Jy  sigma=1.177830
! Fit after  self-cal, rms=0.082784Jy  sigma=1.170915
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.33 x 10.16 at 5.341 degrees (North through East)
! Clean map  min=-0.0084852  max=0.24745 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.10     KP        1.17     LA        1.00     
!   MK        1.01     NL        1.04     OV        1.07     PT        0.96     
!   SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        1.01     LA        0.93     
!   MK        1.16     NL        1.07     OV        1.09     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.082784Jy  sigma=1.170915
! Fit after  self-cal, rms=0.081538Jy  sigma=1.114876
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.345 mas, bmaj=10.19 mas, bpa=5.569 degrees
! Estimated noise=0.698608 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145498 Jy
! Component: 100  -  total flux cleaned = 0.0232966 Jy
! Component: 150  -  total flux cleaned = 0.0297674 Jy
! Component: 200  -  total flux cleaned = 0.0333813 Jy
! Total flux subtracted in 200 components = 0.0333813 Jy
! Clean residual min=-0.006326 max=0.006573 Jy/beam
! Clean residual mean=0.000037 rms=0.001913 Jy/beam
! Combined flux in latest and established models = 0.551287 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 169 components and 0.551287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077708Jy  sigma=1.076959
! Fit after  self-cal, rms=0.077437Jy  sigma=1.072997
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077437Jy  sigma=1.072997
! Fit after  self-cal, rms=0.071931Jy  sigma=1.019653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.336 mas, bmaj=10.2 mas, bpa=5.156 degrees
! Estimated noise=0.696109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533708 Jy
! Component: 100  -  total flux cleaned = 0.00861879 Jy
! Component: 150  -  total flux cleaned = 0.00940529 Jy
! Component: 200  -  total flux cleaned = 0.00990204 Jy
! Total flux subtracted in 200 components = 0.00990204 Jy
! Clean residual min=-0.006826 max=0.005962 Jy/beam
! Clean residual mean=0.000020 rms=0.001698 Jy/beam
! Combined flux in latest and established models = 0.561189 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 202 components and 0.561189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071357Jy  sigma=1.012574
! Fit after  self-cal, rms=0.071303Jy  sigma=1.011794
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267061 Jy
! Component: 100  -  total flux cleaned = 0.00303827 Jy
! Component: 150  -  total flux cleaned = 0.00319981 Jy
! Component: 200  -  total flux cleaned = 0.00334837 Jy
! Total flux subtracted in 200 components = 0.00334837 Jy
! Clean residual min=-0.006387 max=0.005888 Jy/beam
! Clean residual mean=0.000017 rms=0.001615 Jy/beam
! Combined flux in latest and established models = 0.564538 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 216 components and 0.564538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071091Jy  sigma=1.008954
! Fit after  self-cal, rms=0.071072Jy  sigma=1.008729
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071072Jy  sigma=1.008729
! Fit after  self-cal, rms=0.071028Jy  sigma=1.006635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.333 mas, bmaj=10.19 mas, bpa=5.177 degrees
! Estimated noise=0.698209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270613 Jy
! Component: 100  -  total flux cleaned = 0.00354297 Jy
! Component: 150  -  total flux cleaned = 0.00369454 Jy
! Component: 200  -  total flux cleaned = 0.00390046 Jy
! Total flux subtracted in 200 components = 0.00390046 Jy
! Clean residual min=-0.006534 max=0.005958 Jy/beam
! Clean residual mean=0.000012 rms=0.001592 Jy/beam
! Combined flux in latest and established models = 0.568438 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 225 components and 0.568438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070809Jy  sigma=1.004786
! Fit after  self-cal, rms=0.070791Jy  sigma=1.004613
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935234 Jy
! Component: 100  -  total flux cleaned = 0.00112572 Jy
! Component: 150  -  total flux cleaned = 0.00118174 Jy
! Component: 200  -  total flux cleaned = 0.00129288 Jy
! Total flux subtracted in 200 components = 0.00129288 Jy
! Clean residual min=-0.006174 max=0.005954 Jy/beam
! Clean residual mean=0.000011 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.569731 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 233 components and 0.569731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070690Jy  sigma=1.003204
! Fit after  self-cal, rms=0.070681Jy  sigma=1.003122
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070681Jy  sigma=1.003122
! Fit after  self-cal, rms=0.067642Jy  sigma=0.925176
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.851 mas, bmaj=16.57 mas, bpa=-6.907 degrees
! Estimated noise=0.817554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00718017 Jy
! Component: 100  -  total flux cleaned = 0.0108247 Jy
! Component: 150  -  total flux cleaned = 0.0132442 Jy
! Component: 200  -  total flux cleaned = 0.0149297 Jy
! Total flux subtracted in 200 components = 0.0149297 Jy
! Clean residual min=-0.004845 max=0.006318 Jy/beam
! Clean residual mean=0.000013 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.584661 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 272 components and 0.58466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067083Jy  sigma=0.919035
! Fit after  self-cal, rms=0.067063Jy  sigma=0.918688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157408 Jy
! Component: 100  -  total flux cleaned = 0.0025815 Jy
! Component: 150  -  total flux cleaned = 0.0029493 Jy
! Component: 200  -  total flux cleaned = 0.00308494 Jy
! Total flux subtracted in 200 components = 0.00308494 Jy
! Clean residual min=-0.004967 max=0.006165 Jy/beam
! Clean residual mean=0.000010 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.587745 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 297 components and 0.587746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067028Jy  sigma=0.918540
! Fit after  self-cal, rms=0.067024Jy  sigma=0.918485
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=10.19 mas, bpa=4.657 degrees
! Estimated noise=0.711087 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.34 x 10.19 at 4.657 degrees (North through East)
! Clean map  min=-0.0045901  max=0.25865 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.545 mas, bmaj=8.658 mas, bpa=7.358 degrees
! Estimated noise=1.14474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199854 Jy
! Component: 100  -  total flux cleaned = 0.302562 Jy
! Component: 150  -  total flux cleaned = 0.366277 Jy
! Component: 200  -  total flux cleaned = 0.410418 Jy
! Total flux subtracted in 200 components = 0.410418 Jy
! Clean residual min=-0.012977 max=0.025370 Jy/beam
! Clean residual mean=0.000046 rms=0.004841 Jy/beam
! Combined flux in latest and established models = 0.410418 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 0.410418 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=10.19 mas, bpa=4.657 degrees
! Estimated noise=0.711087 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0528315 Jy
! Component: 100  -  total flux cleaned = 0.0867123 Jy
! Component: 150  -  total flux cleaned = 0.109538 Jy
! Component: 200  -  total flux cleaned = 0.125496 Jy
! Total flux subtracted in 200 components = 0.125496 Jy
! Clean residual min=-0.006583 max=0.010367 Jy/beam
! Clean residual mean=0.000042 rms=0.002493 Jy/beam
! Combined flux in latest and established models = 0.535914 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 135 components and 0.535914 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.851 mas, bmaj=16.57 mas, bpa=-6.907 degrees
! Estimated noise=0.817554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173804 Jy
! Component: 100  -  total flux cleaned = 0.0283966 Jy
! Component: 150  -  total flux cleaned = 0.0358395 Jy
! Component: 200  -  total flux cleaned = 0.0410128 Jy
! Total flux subtracted in 200 components = 0.0410128 Jy
! Clean residual min=-0.004470 max=0.006299 Jy/beam
! Clean residual mean=0.000023 rms=0.001760 Jy/beam
! Combined flux in latest and established models = 0.576927 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00366171 Jy
! Component: 100  -  total flux cleaned = 0.00583149 Jy
! Component: 150  -  total flux cleaned = 0.00700999 Jy
! Component: 200  -  total flux cleaned = 0.00791598 Jy
! Total flux subtracted in 200 components = 0.00791598 Jy
! Clean residual min=-0.004524 max=0.005845 Jy/beam
! Clean residual mean=0.000014 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.584843 Jy
! Adding 120 model components to the UV plane model.
! The established model now contains 240 components and 0.584842 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=10.19 mas, bpa=4.657 degrees
! Estimated noise=0.711087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000359844 Jy
! Component: 100  -  total flux cleaned = 0.000680706 Jy
! Component: 150  -  total flux cleaned = 0.000955012 Jy
! Component: 200  -  total flux cleaned = 0.00111941 Jy
! Total flux subtracted in 200 components = 0.00111941 Jy
! Clean residual min=-0.004272 max=0.004993 Jy/beam
! Clean residual mean=0.000008 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.585962 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 256 components and 0.585962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067312Jy  sigma=0.923329
! Fit after  self-cal, rms=0.067232Jy  sigma=0.921770
wmodel /d2/scr/pima/rv101_uvs/J1827-0405_S_map.mod
! Writing 256 model components to file: /d2/scr/pima/rv101_uvs/J1827-0405_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J1827-0405_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1827-0405_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J1827-0405_S_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J1827-0405_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196559 Jy
! Component: 100  -  total flux cleaned = 0.00257739 Jy
! Component: 150  -  total flux cleaned = 0.00321388 Jy
! Component: 200  -  total flux cleaned = 0.00354901 Jy
! Component: 250  -  total flux cleaned = 0.00393061 Jy
! Component: 300  -  total flux cleaned = 0.00429505 Jy
! Component: 350  -  total flux cleaned = 0.0044707 Jy
! Component: 400  -  total flux cleaned = 0.00469835 Jy
! Component: 450  -  total flux cleaned = 0.00486454 Jy
! Component: 500  -  total flux cleaned = 0.00502642 Jy
! Component: 550  -  total flux cleaned = 0.00513137 Jy
! Component: 600  -  total flux cleaned = 0.00523431 Jy
! Component: 650  -  total flux cleaned = 0.00528431 Jy
! Component: 700  -  total flux cleaned = 0.00547855 Jy
! Component: 750  -  total flux cleaned = 0.00552505 Jy
! Component: 800  -  total flux cleaned = 0.00561802 Jy
! Component: 850  -  total flux cleaned = 0.00571003 Jy
! Component: 900  -  total flux cleaned = 0.00588843 Jy
! Component: 950  -  total flux cleaned = 0.00606425 Jy
! Component: 1000  -  total flux cleaned = 0.00628006 Jy
! Component: 1050  -  total flux cleaned = 0.00649223 Jy
! Component: 1100  -  total flux cleaned = 0.00657621 Jy
! Component: 1150  -  total flux cleaned = 0.00686179 Jy
! Component: 1200  -  total flux cleaned = 0.00702267 Jy
! Component: 1250  -  total flux cleaned = 0.00714062 Jy
! Component: 1300  -  total flux cleaned = 0.00729619 Jy
! Component: 1350  -  total flux cleaned = 0.00748626 Jy
! Component: 1400  -  total flux cleaned = 0.00748652 Jy
! Component: 1450  -  total flux cleaned = 0.00770806 Jy
! Component: 1500  -  total flux cleaned = 0.00778071 Jy
! Component: 1550  -  total flux cleaned = 0.00792412 Jy
! Component: 1600  -  total flux cleaned = 0.00792398 Jy
! Component: 1650  -  total flux cleaned = 0.00806354 Jy
! Component: 1700  -  total flux cleaned = 0.00813235 Jy
! Component: 1750  -  total flux cleaned = 0.00820022 Jy
! Component: 1800  -  total flux cleaned = 0.00833472 Jy
! Component: 1850  -  total flux cleaned = 0.00826829 Jy
! Component: 1900  -  total flux cleaned = 0.00836664 Jy
! Component: 1950  -  total flux cleaned = 0.00833412 Jy
! Component: 2000  -  total flux cleaned = 0.00833411 Jy
! Component: 2050  -  total flux cleaned = 0.00839728 Jy
! Component: 2100  -  total flux cleaned = 0.0083972 Jy
! Component: 2150  -  total flux cleaned = 0.00842813 Jy
! Component: 2200  -  total flux cleaned = 0.00842828 Jy
! Component: 2250  -  total flux cleaned = 0.0085197 Jy
! Component: 2300  -  total flux cleaned = 0.0086999 Jy
! Component: 2350  -  total flux cleaned = 0.00875975 Jy
! Component: 2400  -  total flux cleaned = 0.00887819 Jy
! Component: 2450  -  total flux cleaned = 0.009025 Jy
! Component: 2500  -  total flux cleaned = 0.00914128 Jy
! Component: 2550  -  total flux cleaned = 0.00928527 Jy
! Component: 2600  -  total flux cleaned = 0.00937094 Jy
! Component: 2650  -  total flux cleaned = 0.00942759 Jy
! Component: 2700  -  total flux cleaned = 0.00951249 Jy
! Component: 2750  -  total flux cleaned = 0.0096524 Jy
! Component: 2800  -  total flux cleaned = 0.00973575 Jy
! Component: 2850  -  total flux cleaned = 0.00981844 Jy
! Component: 2900  -  total flux cleaned = 0.00981849 Jy
! Component: 2950  -  total flux cleaned = 0.00984571 Jy
! Component: 3000  -  total flux cleaned = 0.00998084 Jy
! Component: 3050  -  total flux cleaned = 0.0100076 Jy
! Component: 3100  -  total flux cleaned = 0.00995406 Jy
! Component: 3150  -  total flux cleaned = 0.0100337 Jy
! Component: 3200  -  total flux cleaned = 0.0100604 Jy
! Component: 3250  -  total flux cleaned = 0.0101655 Jy
! Component: 3300  -  total flux cleaned = 0.0102175 Jy
! Component: 3350  -  total flux cleaned = 0.0101396 Jy
! Component: 3400  -  total flux cleaned = 0.0101657 Jy
! Component: 3450  -  total flux cleaned = 0.0102425 Jy
! Component: 3500  -  total flux cleaned = 0.0102424 Jy
! Component: 3550  -  total flux cleaned = 0.0102424 Jy
! Component: 3600  -  total flux cleaned = 0.0102928 Jy
! Component: 3650  -  total flux cleaned = 0.0103177 Jy
! Component: 3700  -  total flux cleaned = 0.0103427 Jy
! Component: 3750  -  total flux cleaned = 0.0103425 Jy
! Component: 3800  -  total flux cleaned = 0.0103179 Jy
! Component: 3850  -  total flux cleaned = 0.0103426 Jy
! Component: 3900  -  total flux cleaned = 0.0103917 Jy
! Component: 3950  -  total flux cleaned = 0.0104161 Jy
! Component: 4000  -  total flux cleaned = 0.0104646 Jy
! Component: 4050  -  total flux cleaned = 0.0105369 Jy
! Total flux subtracted in 4096 components = 0.0105608 Jy
! Clean residual min=-0.001368 max=0.001538 Jy/beam
! Clean residual mean=0.000003 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.596522 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 558 components and 0.596522 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J1827-0405_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.34 x 10.19 at 4.657 degrees (North through East)
! Clean map  min=-0.0024586  max=0.26132 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1827-0405_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.261315 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000426786 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.489966 0.489966 0.979932 1.95986 3.91973 7.83946 15.6789 31.3578 62.7157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.261 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  612.287 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J1827-0405_S_uvs.log closed on Sat Nov 29 13:55:56 2014