! Started logfile: /d2/scr/pima/rv101_uvs/J1752-2956_X_uvs.log on Sat Nov 29 16:36:26 2014 obs /d2/scr/pima/rv101_uvs/J1752-2956_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_X_uva.fits ! AN table 1: 87 integrations on 15 of 15 possible baselines. ! AN table 2: 87 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.67433 visibilities/baseline/integration-bin. ! Found source: J1752-2956 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7040 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1752-2956_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.011165Jy sigma=17.293256 ! Fit after self-cal, rms=0.905513Jy sigma=15.730437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=8.409 mas, bpa=-5.685 degrees ! Estimated noise=0.848738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077535 Jy ! Component: 100 - total flux cleaned = 0.094777 Jy ! Total flux subtracted in 100 components = 0.094777 Jy ! Clean residual min=-0.006218 max=0.005956 Jy/beam ! Clean residual mean=-0.000005 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.094777 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.094777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101863Jy sigma=1.703534 ! Fit after self-cal, rms=0.100951Jy sigma=1.688835 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=8.509 mas, bpa=-4.701 degrees ! Estimated noise=0.525451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784418 Jy ! Component: 100 - total flux cleaned = 0.011951 Jy ! Component: 150 - total flux cleaned = 0.0143868 Jy ! Component: 200 - total flux cleaned = 0.0159331 Jy ! Total flux subtracted in 200 components = 0.0159331 Jy ! Clean residual min=-0.003375 max=0.003995 Jy/beam ! Clean residual mean=-0.000006 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.11071 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 69 components and 0.11071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100348Jy sigma=1.678526 ! Fit after self-cal, rms=0.100214Jy sigma=1.676694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.264 x 8.509 at -4.701 degrees (North through East) ! Clean map min=-0.0036217 max=0.10093 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00* LA 0.99 NL 0.99 ! OV 0.97 PT 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 LA 1.02 MK 1.00* NL 0.95 ! OV 1.10 PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.00* LA 0.96 NL 1.07 ! OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 LA 0.96 MK 1.00* NL 0.85 ! OV 1.04 PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.00* LA 1.01 NL 1.00 ! OV 1.12 PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 LA 1.00 MK 1.00* NL 1.00 ! OV 1.06 PT 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00* LA 0.99 NL 1.03 ! OV 1.02 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 LA 0.95 MK 1.00* NL 0.94 ! OV 1.01 PT 1.00 ! ! ! Fit before self-cal, rms=0.100214Jy sigma=1.676694 ! Fit after self-cal, rms=0.098634Jy sigma=1.671542 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.286 mas, bmaj=8.579 mas, bpa=-4.626 degrees ! Estimated noise=0.521149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434195 Jy ! Component: 100 - total flux cleaned = -0.000496581 Jy ! Component: 150 - total flux cleaned = -0.000477029 Jy ! Component: 200 - total flux cleaned = -0.000511093 Jy ! Total flux subtracted in 200 components = -0.000511093 Jy ! Clean residual min=-0.003537 max=0.003096 Jy/beam ! Clean residual mean=0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.110199 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.110199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098619Jy sigma=1.671315 ! Fit after self-cal, rms=0.098582Jy sigma=1.670238 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098582Jy sigma=1.670238 ! Fit after self-cal, rms=0.098504Jy sigma=1.670118 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=8.588 mas, bpa=-4.637 degrees ! Estimated noise=0.520401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033957 Jy ! Component: 100 - total flux cleaned = -0.000320307 Jy ! Component: 150 - total flux cleaned = -0.000298936 Jy ! Component: 200 - total flux cleaned = -0.000315887 Jy ! Total flux subtracted in 200 components = -0.000315887 Jy ! Clean residual min=-0.003470 max=0.003045 Jy/beam ! Clean residual mean=0.000001 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.109883 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.109883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098491Jy sigma=1.669907 ! Fit after self-cal, rms=0.098494Jy sigma=1.669794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.4016e-05 Jy ! Component: 100 - total flux cleaned = -8.69712e-05 Jy ! Component: 150 - total flux cleaned = -5.48328e-05 Jy ! Component: 200 - total flux cleaned = -6.8759e-05 Jy ! Total flux subtracted in 200 components = -6.8759e-05 Jy ! Clean residual min=-0.003411 max=0.003033 Jy/beam ! Clean residual mean=0.000001 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.109814 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.109814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098485Jy sigma=1.669644 ! Fit after self-cal, rms=0.098480Jy sigma=1.669580 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098480Jy sigma=1.669580 ! Fit after self-cal, rms=0.098317Jy sigma=1.669549 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=8.583 mas, bpa=-4.621 degrees ! Estimated noise=0.519632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270254 Jy ! Component: 100 - total flux cleaned = -0.000230118 Jy ! Component: 150 - total flux cleaned = -0.000183609 Jy ! Component: 200 - total flux cleaned = -0.000183263 Jy ! Total flux subtracted in 200 components = -0.000183263 Jy ! Clean residual min=-0.003370 max=0.002986 Jy/beam ! Clean residual mean=0.000001 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.109631 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.109631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098309Jy sigma=1.669412 ! Fit after self-cal, rms=0.098305Jy sigma=1.669356 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77802e-05 Jy ! Component: 100 - total flux cleaned = -0.000115248 Jy ! Component: 150 - total flux cleaned = -0.000127268 Jy ! Component: 200 - total flux cleaned = -0.000136024 Jy ! Total flux subtracted in 200 components = -0.000136024 Jy ! Clean residual min=-0.003329 max=0.002983 Jy/beam ! Clean residual mean=0.000001 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.109495 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 0.109495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098300Jy sigma=1.669258 ! Fit after self-cal, rms=0.098296Jy sigma=1.669210 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098296Jy sigma=1.669210 ! Fit after self-cal, rms=0.098067Jy sigma=1.669186 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=9.255 mas, bpa=-3.301 degrees ! Estimated noise=0.529151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269674 Jy ! Component: 100 - total flux cleaned = -0.000269032 Jy ! Component: 150 - total flux cleaned = -0.0002482 Jy ! Component: 200 - total flux cleaned = -0.000248471 Jy ! Total flux subtracted in 200 components = -0.000248471 Jy ! Clean residual min=-0.003159 max=0.002873 Jy/beam ! Clean residual mean=0.000001 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.109247 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.109247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098062Jy sigma=1.669088 ! Fit after self-cal, rms=0.098057Jy sigma=1.669045 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117522 Jy ! Component: 100 - total flux cleaned = -0.000170077 Jy ! Component: 150 - total flux cleaned = -0.000170651 Jy ! Component: 200 - total flux cleaned = -0.000170502 Jy ! Total flux subtracted in 200 components = -0.000170502 Jy ! Clean residual min=-0.003117 max=0.002868 Jy/beam ! Clean residual mean=0.000000 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.109076 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 155 components and 0.109076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098053Jy sigma=1.668977 ! Fit after self-cal, rms=0.098050Jy sigma=1.668942 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=8.579 mas, bpa=-4.608 degrees ! Estimated noise=0.518573 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.282 x 8.579 at -4.608 degrees (North through East) ! Clean map min=-0.0036607 max=0.10057 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.139 mas, bmaj=8.434 mas, bpa=-5.58 degrees ! Estimated noise=0.84144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770247 Jy ! Component: 100 - total flux cleaned = 0.094596 Jy ! Component: 150 - total flux cleaned = 0.102224 Jy ! Component: 200 - total flux cleaned = 0.106459 Jy ! Total flux subtracted in 200 components = 0.106459 Jy ! Clean residual min=-0.004448 max=0.004029 Jy/beam ! Clean residual mean=0.000006 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.106459 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.106459 Jy ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=8.579 mas, bpa=-4.608 degrees ! Estimated noise=0.518573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132177 Jy ! Component: 100 - total flux cleaned = 0.00221215 Jy ! Component: 150 - total flux cleaned = 0.00244182 Jy ! Component: 200 - total flux cleaned = 0.002617 Jy ! Total flux subtracted in 200 components = 0.002617 Jy ! Clean residual min=-0.003322 max=0.002792 Jy/beam ! Clean residual mean=0.000002 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.109076 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.109076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=9.255 mas, bpa=-3.301 degrees ! Estimated noise=0.529151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404645 Jy ! Component: 100 - total flux cleaned = 0.000361532 Jy ! Component: 150 - total flux cleaned = 0.000329496 Jy ! Component: 200 - total flux cleaned = 0.000329792 Jy ! Total flux subtracted in 200 components = 0.000329792 Jy ! Clean residual min=-0.003089 max=0.002824 Jy/beam ! Clean residual mean=0.000003 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.109405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.97128e-05 Jy ! Component: 100 - total flux cleaned = -3.69901e-05 Jy ! Component: 150 - total flux cleaned = -6.66374e-05 Jy ! Component: 200 - total flux cleaned = -0.000106395 Jy ! Total flux subtracted in 200 components = -0.000106395 Jy ! Clean residual min=-0.003049 max=0.002856 Jy/beam ! Clean residual mean=0.000002 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.109299 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 119 components and 0.109299 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.282 mas, bmaj=8.579 mas, bpa=-4.608 degrees ! Estimated noise=0.518573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.8677e-05 Jy ! Component: 100 - total flux cleaned = 4.80999e-05 Jy ! Component: 150 - total flux cleaned = 2.73342e-06 Jy ! Component: 200 - total flux cleaned = -4.8088e-05 Jy ! Total flux subtracted in 200 components = -4.8088e-05 Jy ! Clean residual min=-0.003150 max=0.002924 Jy/beam ! Clean residual mean=0.000001 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.109251 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 130 components and 0.109251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098049Jy sigma=1.668923 ! Fit after self-cal, rms=0.098048Jy sigma=1.668877 wmodel /d2/scr/pima/rv101_uvs/J1752-2956_X_map.mod ! Writing 130 model components to file: /d2/scr/pima/rv101_uvs/J1752-2956_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1752-2956_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1752-2956_X_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J1752-2956_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209462 Jy ! Component: 100 - total flux cleaned = 1.88325e-05 Jy ! Component: 150 - total flux cleaned = 6.02869e-05 Jy ! Component: 200 - total flux cleaned = -1.42241e-05 Jy ! Component: 250 - total flux cleaned = -4.9229e-05 Jy ! Component: 300 - total flux cleaned = -8.38206e-05 Jy ! Component: 350 - total flux cleaned = -5.427e-05 Jy ! Component: 400 - total flux cleaned = -5.29609e-05 Jy ! Component: 450 - total flux cleaned = -0.000105634 Jy ! Component: 500 - total flux cleaned = -0.000230212 Jy ! Component: 550 - total flux cleaned = -0.000324586 Jy ! Component: 600 - total flux cleaned = -0.000369815 Jy ! Component: 650 - total flux cleaned = -0.00034975 Jy ! Component: 700 - total flux cleaned = -0.000349461 Jy ! Component: 750 - total flux cleaned = -0.000348716 Jy ! Component: 800 - total flux cleaned = -0.000367967 Jy ! Component: 850 - total flux cleaned = -0.000404633 Jy ! Component: 900 - total flux cleaned = -0.000386834 Jy ! Component: 950 - total flux cleaned = -0.000370227 Jy ! Component: 1000 - total flux cleaned = -0.000486113 Jy ! Component: 1050 - total flux cleaned = -0.000550206 Jy ! Component: 1100 - total flux cleaned = -0.000566378 Jy ! Component: 1150 - total flux cleaned = -0.000612571 Jy ! Component: 1200 - total flux cleaned = -0.000627542 Jy ! Component: 1250 - total flux cleaned = -0.000612598 Jy ! Component: 1300 - total flux cleaned = -0.000642107 Jy ! Component: 1350 - total flux cleaned = -0.000642272 Jy ! Component: 1400 - total flux cleaned = -0.000627845 Jy ! Component: 1450 - total flux cleaned = -0.000613621 Jy ! Component: 1500 - total flux cleaned = -0.000627539 Jy ! Component: 1550 - total flux cleaned = -0.00059966 Jy ! Component: 1600 - total flux cleaned = -0.00058595 Jy ! Component: 1650 - total flux cleaned = -0.000586098 Jy ! Component: 1700 - total flux cleaned = -0.000599633 Jy ! Component: 1750 - total flux cleaned = -0.000612981 Jy ! Component: 1800 - total flux cleaned = -0.0005602 Jy ! Component: 1850 - total flux cleaned = -0.000547053 Jy ! Component: 1900 - total flux cleaned = -0.000507821 Jy ! Component: 1950 - total flux cleaned = -0.000455959 Jy ! Component: 2000 - total flux cleaned = -0.000456059 Jy ! Component: 2050 - total flux cleaned = -0.000456127 Jy ! Component: 2100 - total flux cleaned = -0.000417821 Jy ! Component: 2150 - total flux cleaned = -0.00040511 Jy ! Component: 2200 - total flux cleaned = -0.000379854 Jy ! Component: 2250 - total flux cleaned = -0.000354689 Jy ! Component: 2300 - total flux cleaned = -0.000342169 Jy ! Component: 2350 - total flux cleaned = -0.000304782 Jy ! Component: 2400 - total flux cleaned = -0.000279906 Jy ! Component: 2450 - total flux cleaned = -0.000255073 Jy ! Component: 2500 - total flux cleaned = -0.000218011 Jy ! Component: 2550 - total flux cleaned = -0.000205621 Jy ! Component: 2600 - total flux cleaned = -0.000168715 Jy ! Component: 2650 - total flux cleaned = -0.000156464 Jy ! Component: 2700 - total flux cleaned = -0.000144131 Jy ! Component: 2750 - total flux cleaned = -0.00014405 Jy ! Component: 2800 - total flux cleaned = -0.000144069 Jy ! Component: 2850 - total flux cleaned = -0.000144043 Jy ! Component: 2900 - total flux cleaned = -0.000168521 Jy ! Component: 2950 - total flux cleaned = -0.000168514 Jy ! Component: 3000 - total flux cleaned = -0.000168497 Jy ! Component: 3050 - total flux cleaned = -0.000144056 Jy ! Component: 3100 - total flux cleaned = -0.00013186 Jy ! Component: 3150 - total flux cleaned = -0.0001441 Jy ! Component: 3200 - total flux cleaned = -0.00015635 Jy ! Component: 3250 - total flux cleaned = -0.000119528 Jy ! Component: 3300 - total flux cleaned = -0.00014421 Jy ! Component: 3350 - total flux cleaned = -0.000156531 Jy ! Component: 3400 - total flux cleaned = -0.000181308 Jy ! Component: 3450 - total flux cleaned = -0.000193643 Jy ! Component: 3500 - total flux cleaned = -0.000230839 Jy ! Component: 3550 - total flux cleaned = -0.000268233 Jy ! Component: 3600 - total flux cleaned = -0.000330814 Jy ! Component: 3650 - total flux cleaned = -0.000343507 Jy ! Component: 3700 - total flux cleaned = -0.00035617 Jy ! Component: 3750 - total flux cleaned = -0.000381687 Jy ! Component: 3800 - total flux cleaned = -0.000419982 Jy ! Component: 3850 - total flux cleaned = -0.000445575 Jy ! Component: 3900 - total flux cleaned = -0.000471314 Jy ! Component: 3950 - total flux cleaned = -0.000497228 Jy ! Component: 4000 - total flux cleaned = -0.000536244 Jy ! Component: 4050 - total flux cleaned = -0.000549323 Jy ! Total flux subtracted in 4096 components = -0.000575586 Jy ! Clean residual min=-0.000695 max=0.000775 Jy/beam ! Clean residual mean=-0.000003 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.108675 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 463 components and 0.108675 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1752-2956_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.282 x 8.579 at -4.608 degrees (North through East) ! Clean map min=-0.0033544 max=0.099607 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0996067 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235908 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710517 0.710517 1.42103 2.84207 5.68413 11.3683 22.7365 45.4731 90.9462 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.099 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 422.227 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1752-2956_X_uvs.log closed on Sat Nov 29 16:36:31 2014