! Started logfile: /d2/scr/pima/rv101_uvs/J1752-2956_S_uvs.log on Sat Nov 29 13:55:29 2014
obs /d2/scr/pima/rv101_uvs/J1752-2956_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_S_uva.fits
! AN table 1: 44 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.779545 visibilities/baseline/integration-bin.
! Found source: J1752-2956
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1372 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1752-2956_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008439Jy  sigma=14.290117
! Fit after  self-cal, rms=0.905725Jy  sigma=12.752238
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=17.55 mas, bmaj=52.18 mas, bpa=-1.75 degrees
! Estimated noise=3.35594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0703957 Jy
! Component: 100  -  total flux cleaned = 0.0916169 Jy
! Total flux subtracted in 100 components = 0.0916169 Jy
! Clean residual min=-0.007891 max=0.010316 Jy/beam
! Clean residual mean=-0.000172 rms=0.003799 Jy/beam
! Combined flux in latest and established models = 0.0916169 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.0916169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067795Jy  sigma=0.850529
! Fit after  self-cal, rms=0.067061Jy  sigma=0.841757
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19 mas, bmaj=53.7 mas, bpa=-1.285 degrees
! Estimated noise=1.47688 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01324 Jy
! Component: 100  -  total flux cleaned = 0.0192205 Jy
! Component: 150  -  total flux cleaned = 0.0213349 Jy
! Component: 200  -  total flux cleaned = 0.0215254 Jy
! Total flux subtracted in 200 components = 0.0215254 Jy
! Clean residual min=-0.002761 max=0.002748 Jy/beam
! Clean residual mean=-0.000159 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.113142 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 143 components and 0.113142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063581Jy  sigma=0.801799
! Fit after  self-cal, rms=0.063411Jy  sigma=0.800762
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 19 x 53.7 at -1.285 degrees (North through East)
! Clean map  min=-0.0043043  max=0.0928 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.12     LA        1.07     OV        1.02     
!   PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.11     LA        1.03     OV        1.02     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     KP        1.08     LA        0.86     OV        1.16     
!   PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.063411Jy  sigma=0.800762
! Fit after  self-cal, rms=0.064103Jy  sigma=0.792306
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19.15 mas, bmaj=53.5 mas, bpa=-1.144 degrees
! Estimated noise=1.52463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328308 Jy
! Component: 100  -  total flux cleaned = 0.00353007 Jy
! Component: 150  -  total flux cleaned = 0.0031086 Jy
! Component: 200  -  total flux cleaned = 0.00257424 Jy
! Total flux subtracted in 200 components = 0.00257424 Jy
! Clean residual min=-0.001201 max=0.001197 Jy/beam
! Clean residual mean=-0.000083 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.115717 Jy
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 249 components and 0.115717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063486Jy  sigma=0.787915
! Fit after  self-cal, rms=0.063491Jy  sigma=0.787383
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063491Jy  sigma=0.787383
! Fit after  self-cal, rms=0.065195Jy  sigma=0.784278
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.21 mas, bmaj=53.37 mas, bpa=-0.9624 degrees
! Estimated noise=1.57729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243127 Jy
! Component: 100  -  total flux cleaned = 0.00255464 Jy
! Component: 150  -  total flux cleaned = 0.00243378 Jy
! Component: 200  -  total flux cleaned = 0.00184941 Jy
! Total flux subtracted in 200 components = 0.00184941 Jy
! Clean residual min=-0.001024 max=0.001018 Jy/beam
! Clean residual mean=-0.000058 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.117566 Jy
selfcal
! Performing phase self-cal
! Adding 135 model components to the UV plane model.
! The established model now contains 376 components and 0.117566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064802Jy  sigma=0.781326
! Fit after  self-cal, rms=0.064812Jy  sigma=0.781258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000938958 Jy
! Component: 100  -  total flux cleaned = -0.0014864 Jy
! Component: 150  -  total flux cleaned = -0.0020926 Jy
! Component: 200  -  total flux cleaned = -0.0028946 Jy
! Total flux subtracted in 200 components = -0.0028946 Jy
! Clean residual min=-0.000762 max=0.000767 Jy/beam
! Clean residual mean=-0.000050 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.114671 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 466 components and 0.114671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064689Jy  sigma=0.780637
! Fit after  self-cal, rms=0.064686Jy  sigma=0.780606
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064686Jy  sigma=0.780606
! Fit after  self-cal, rms=0.066199Jy  sigma=0.778834
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.22 mas, bmaj=53.29 mas, bpa=-0.7338 degrees
! Estimated noise=1.62306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025458 Jy
! Component: 100  -  total flux cleaned = 0.00268451 Jy
! Component: 150  -  total flux cleaned = 0.00232549 Jy
! Component: 200  -  total flux cleaned = 0.00181159 Jy
! Total flux subtracted in 200 components = 0.00181159 Jy
! Clean residual min=-0.000808 max=0.000814 Jy/beam
! Clean residual mean=-0.000044 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.116483 Jy
selfcal
! Performing phase self-cal
! Adding 124 model components to the UV plane model.
! The established model now contains 584 components and 0.116483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065947Jy  sigma=0.776863
! Fit after  self-cal, rms=0.065944Jy  sigma=0.776846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000618647 Jy
! Component: 100  -  total flux cleaned = -0.00108445 Jy
! Component: 150  -  total flux cleaned = -0.00162947 Jy
! Component: 200  -  total flux cleaned = -0.0022119 Jy
! Total flux subtracted in 200 components = -0.0022119 Jy
! Clean residual min=-0.000590 max=0.000587 Jy/beam
! Clean residual mean=-0.000037 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.114271 Jy
! Performing phase self-cal
! Adding 105 model components to the UV plane model.
! The established model now contains 680 components and 0.114271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065873Jy  sigma=0.776495
! Fit after  self-cal, rms=0.065868Jy  sigma=0.776480
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065868Jy  sigma=0.776480
! Fit after  self-cal, rms=0.065298Jy  sigma=0.771579
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.52 mas, bmaj=53.19 mas, bpa=-0.6506 degrees
! Estimated noise=1.63362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133025 Jy
! Component: 100  -  total flux cleaned = 0.00178529 Jy
! Component: 150  -  total flux cleaned = 0.00197818 Jy
! Component: 200  -  total flux cleaned = 0.00189124 Jy
! Total flux subtracted in 200 components = 0.00189124 Jy
! Clean residual min=-0.000682 max=0.000684 Jy/beam
! Clean residual mean=-0.000045 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.116162 Jy
selfcal
! Performing phase self-cal
! Adding 128 model components to the UV plane model.
! The established model now contains 808 components and 0.116162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065186Jy  sigma=0.770830
! Fit after  self-cal, rms=0.065183Jy  sigma=0.770754
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352641 Jy
! Component: 100  -  total flux cleaned = -0.000567877 Jy
! Component: 150  -  total flux cleaned = -0.000799041 Jy
! Component: 200  -  total flux cleaned = -0.00101614 Jy
! Total flux subtracted in 200 components = -0.00101614 Jy
! Clean residual min=-0.000497 max=0.000495 Jy/beam
! Clean residual mean=-0.000037 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.115146 Jy
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 910 components and 0.115146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065137Jy  sigma=0.770409
! Fit after  self-cal, rms=0.065135Jy  sigma=0.770390
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=19.17 mas, bmaj=53.17 mas, bpa=-0.8394 degrees
! Estimated noise=1.63099 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 19.17 x 53.17 at -0.8394 degrees (North through East)
! Clean map  min=-0.0055383  max=0.099548 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=17.89 mas, bmaj=51.41 mas, bpa=-0.9363 degrees
! Estimated noise=3.72805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0778323 Jy
! Component: 100  -  total flux cleaned = 0.101784 Jy
! Component: 150  -  total flux cleaned = 0.115198 Jy
! Component: 200  -  total flux cleaned = 0.118555 Jy
! Total flux subtracted in 200 components = 0.118555 Jy
! Clean residual min=-0.005163 max=0.005155 Jy/beam
! Clean residual mean=-0.000098 rms=0.002358 Jy/beam
! Combined flux in latest and established models = 0.118555 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 89 model components to the UV plane model.
! The established model now contains 89 components and 0.118555 Jy
! Inverting map and beam 
! Estimated beam: bmin=19.17 mas, bmaj=53.17 mas, bpa=-0.8394 degrees
! Estimated noise=1.63099 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380201 Jy
! Component: 100  -  total flux cleaned = 0.00403404 Jy
! Component: 150  -  total flux cleaned = 0.00371225 Jy
! Component: 200  -  total flux cleaned = 0.00299107 Jy
! Total flux subtracted in 200 components = 0.00299107 Jy
! Clean residual min=-0.001831 max=0.001846 Jy/beam
! Clean residual mean=-0.000068 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.121546 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 179 components and 0.121546 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.52 mas, bmaj=53.19 mas, bpa=-0.6506 degrees
! Estimated noise=1.63362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353263 Jy
! Component: 100  -  total flux cleaned = -0.00163829 Jy
! Component: 150  -  total flux cleaned = -0.0026693 Jy
! Component: 200  -  total flux cleaned = -0.00368541 Jy
! Total flux subtracted in 200 components = -0.00368541 Jy
! Clean residual min=-0.000987 max=0.000979 Jy/beam
! Clean residual mean=-0.000050 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.11786 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000956303 Jy
! Component: 100  -  total flux cleaned = -0.00181845 Jy
! Component: 150  -  total flux cleaned = -0.00255287 Jy
! Component: 200  -  total flux cleaned = -0.00305729 Jy
! Total flux subtracted in 200 components = -0.00305729 Jy
! Clean residual min=-0.000669 max=0.000664 Jy/beam
! Clean residual mean=-0.000039 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.114803 Jy
! Adding 204 model components to the UV plane model.
! The established model now contains 376 components and 0.114803 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=19.17 mas, bmaj=53.17 mas, bpa=-0.8394 degrees
! Estimated noise=1.63099 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000446262 Jy
! Component: 100  -  total flux cleaned = -0.000894018 Jy
! Component: 150  -  total flux cleaned = -0.00138223 Jy
! Component: 200  -  total flux cleaned = -0.00184115 Jy
! Total flux subtracted in 200 components = -0.00184115 Jy
! Clean residual min=-0.000530 max=0.000526 Jy/beam
! Clean residual mean=-0.000028 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.112962 Jy
selfcal
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 464 components and 0.112962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065179Jy  sigma=0.771105
! Fit after  self-cal, rms=0.065181Jy  sigma=0.771032
wmodel /d2/scr/pima/rv101_uvs/J1752-2956_S_map.mod
! Writing 464 model components to file: /d2/scr/pima/rv101_uvs/J1752-2956_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J1752-2956_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J1752-2956_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/rv101_uvs/J1752-2956_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 19.17 x 53.17 at -0.8394 degrees (North through East)
! Clean map  min=-0.0052299  max=0.10176 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1752-2956_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.101756 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261224 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.770152 0.770152 1.5403 3.08061 6.16121 12.3224 24.6449 49.2897 98.5794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.101 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  389.533 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J1752-2956_S_uvs.log closed on Sat Nov 29 13:55:35 2014