! Started logfile: /d2/scr/pima/rv101_uvs/J1610+2414_X_uvs.log on Sat Nov 29 16:35:45 2014 obs /d2/scr/pima/rv101_uvs/J1610+2414_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_X_uva.fits ! AN table 1: 55 integrations on 21 of 21 possible baselines. ! AN table 2: 44 integrations on 1 of 1 possible baselines. ! AN table 3: 56 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.922526 visibilities/baseline/integration-bin. ! Found source: J1610+2414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8764 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1610+2414_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 78 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 78 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 78 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 78 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.031022Jy sigma=9.642502 ! Fit after self-cal, rms=0.733789Jy sigma=6.815415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.065 mas, bmaj=1.272 mas, bpa=-79.01 degrees ! Estimated noise=1.75563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202031 Jy ! Component: 100 - total flux cleaned = 0.250942 Jy ! Total flux subtracted in 100 components = 0.250942 Jy ! Clean residual min=-0.011166 max=0.018986 Jy/beam ! Clean residual mean=0.000020 rms=0.003172 Jy/beam ! Combined flux in latest and established models = 0.250942 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.250942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115072Jy sigma=1.042723 ! Fit after self-cal, rms=0.115073Jy sigma=1.042559 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219124 Jy ! Component: 100 - total flux cleaned = 0.0352284 Jy ! Total flux subtracted in 100 components = 0.0352284 Jy ! Clean residual min=-0.007862 max=0.009687 Jy/beam ! Clean residual mean=0.000007 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.28617 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.28617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108376Jy sigma=0.975931 ! Fit after self-cal, rms=0.108358Jy sigma=0.975579 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.368 mas, bmaj=1.626 mas, bpa=-67.62 degrees ! Estimated noise=0.926961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138467 Jy ! Component: 100 - total flux cleaned = 0.0205004 Jy ! Component: 150 - total flux cleaned = 0.0243427 Jy ! Component: 200 - total flux cleaned = 0.0267726 Jy ! Total flux subtracted in 200 components = 0.0267726 Jy ! Clean residual min=-0.005955 max=0.005930 Jy/beam ! Clean residual mean=-0.000007 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.312943 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.312943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106719Jy sigma=0.959640 ! Fit after self-cal, rms=0.106689Jy sigma=0.959270 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.368 x 1.626 at -67.62 degrees (North through East) ! Clean map min=-0.005735 max=0.27141 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.97 LA 1.06 NL 1.00 ! OV 0.97 PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 KP 1.00* LA 1.06 MK 0.96 ! NL 0.97 OV 1.00 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.03 LA 0.98 NL 0.98 ! OV 0.95 PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 KP 1.00* LA 1.01 MK 1.00 ! NL 0.99 OV 0.95 PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.02 LA 1.06 NL 1.02 ! OV 1.00 PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 1.00* LA 1.08 MK 0.99 ! NL 1.00 OV 1.07 PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.03 LA 1.00 NL 1.01 ! OV 1.00 PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 KP 1.00* LA 1.09 MK 1.01 ! NL 1.03 OV 1.00 PT 0.92 ! ! ! Fit before self-cal, rms=0.106689Jy sigma=0.959270 ! Fit after self-cal, rms=0.105464Jy sigma=0.946803 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.37 mas, bmaj=1.627 mas, bpa=-67.53 degrees ! Estimated noise=0.923368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112928 Jy ! Component: 100 - total flux cleaned = 0.00140946 Jy ! Component: 150 - total flux cleaned = 0.00150006 Jy ! Component: 200 - total flux cleaned = 0.00152722 Jy ! Total flux subtracted in 200 components = 0.00152722 Jy ! Clean residual min=-0.003196 max=0.002908 Jy/beam ! Clean residual mean=-0.000004 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.31447 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.31447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105440Jy sigma=0.946585 ! Fit after self-cal, rms=0.105444Jy sigma=0.946435 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105444Jy sigma=0.946435 ! Fit after self-cal, rms=0.105369Jy sigma=0.946412 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.368 mas, bmaj=1.627 mas, bpa=-67.33 degrees ! Estimated noise=0.922813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750618 Jy ! Component: 100 - total flux cleaned = 0.000962347 Jy ! Component: 150 - total flux cleaned = 0.000962457 Jy ! Component: 200 - total flux cleaned = 0.000984734 Jy ! Total flux subtracted in 200 components = 0.000984734 Jy ! Clean residual min=-0.003057 max=0.002894 Jy/beam ! Clean residual mean=-0.000004 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.315455 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.315455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105355Jy sigma=0.946303 ! Fit after self-cal, rms=0.105354Jy sigma=0.946293 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147081 Jy ! Component: 100 - total flux cleaned = 0.000206385 Jy ! Component: 150 - total flux cleaned = 0.000205724 Jy ! Component: 200 - total flux cleaned = 0.000206395 Jy ! Total flux subtracted in 200 components = 0.000206395 Jy ! Clean residual min=-0.002981 max=0.002869 Jy/beam ! Clean residual mean=-0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.315661 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.315661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105346Jy sigma=0.946239 ! Fit after self-cal, rms=0.105346Jy sigma=0.946234 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105346Jy sigma=0.946234 ! Fit after self-cal, rms=0.105276Jy sigma=0.946218 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.367 mas, bmaj=1.627 mas, bpa=-67.2 degrees ! Estimated noise=0.922296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570207 Jy ! Component: 100 - total flux cleaned = 0.000642398 Jy ! Component: 150 - total flux cleaned = 0.000674215 Jy ! Component: 200 - total flux cleaned = 0.000674109 Jy ! Total flux subtracted in 200 components = 0.000674109 Jy ! Clean residual min=-0.002895 max=0.002857 Jy/beam ! Clean residual mean=-0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.316335 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.316335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105269Jy sigma=0.946168 ! Fit after self-cal, rms=0.105269Jy sigma=0.946166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111057 Jy ! Component: 100 - total flux cleaned = 0.000139815 Jy ! Component: 150 - total flux cleaned = 0.000139702 Jy ! Component: 200 - total flux cleaned = 0.000153188 Jy ! Total flux subtracted in 200 components = 0.000153188 Jy ! Clean residual min=-0.002842 max=0.002842 Jy/beam ! Clean residual mean=-0.000005 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.316489 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.316489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105265Jy sigma=0.946138 ! Fit after self-cal, rms=0.105264Jy sigma=0.946137 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105264Jy sigma=0.946137 ! Fit after self-cal, rms=0.105243Jy sigma=0.946127 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=3.075 mas, bpa=20.67 degrees ! Estimated noise=1.09537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457181 Jy ! Component: 100 - total flux cleaned = 0.000520887 Jy ! Component: 150 - total flux cleaned = 0.000510671 Jy ! Component: 200 - total flux cleaned = 0.000491491 Jy ! Total flux subtracted in 200 components = 0.000491491 Jy ! Clean residual min=-0.002802 max=0.002331 Jy/beam ! Clean residual mean=-0.000008 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.31698 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.31698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105242Jy sigma=0.946117 ! Fit after self-cal, rms=0.105242Jy sigma=0.946114 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67091e-05 Jy ! Component: 100 - total flux cleaned = 6.92829e-05 Jy ! Component: 150 - total flux cleaned = 5.04877e-05 Jy ! Component: 200 - total flux cleaned = 3.27223e-05 Jy ! Total flux subtracted in 200 components = 3.27223e-05 Jy ! Clean residual min=-0.002781 max=0.002308 Jy/beam ! Clean residual mean=-0.000008 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.317013 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.317013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105241Jy sigma=0.946114 ! Fit after self-cal, rms=0.105241Jy sigma=0.946109 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.366 mas, bmaj=1.627 mas, bpa=-67.13 degrees ! Estimated noise=0.922057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.366 x 1.627 at -67.13 degrees (North through East) ! Clean map min=-0.0026362 max=0.26976 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.065 mas, bmaj=1.273 mas, bpa=-78.65 degrees ! Estimated noise=1.75013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201122 Jy ! Component: 100 - total flux cleaned = 0.250335 Jy ! Component: 150 - total flux cleaned = 0.272943 Jy ! Component: 200 - total flux cleaned = 0.286832 Jy ! Total flux subtracted in 200 components = 0.286832 Jy ! Clean residual min=-0.006584 max=0.007706 Jy/beam ! Clean residual mean=0.000008 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.286832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.286832 Jy ! Inverting map and beam ! Estimated beam: bmin=1.366 mas, bmaj=1.627 mas, bpa=-67.13 degrees ! Estimated noise=0.922057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132377 Jy ! Component: 100 - total flux cleaned = 0.0193071 Jy ! Component: 150 - total flux cleaned = 0.0228095 Jy ! Component: 200 - total flux cleaned = 0.0251025 Jy ! Total flux subtracted in 200 components = 0.0251025 Jy ! Clean residual min=-0.002937 max=0.002859 Jy/beam ! Clean residual mean=-0.000000 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.311935 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.311935 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=3.075 mas, bpa=20.67 degrees ! Estimated noise=1.09537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215885 Jy ! Component: 100 - total flux cleaned = 0.00337092 Jy ! Component: 150 - total flux cleaned = 0.00411661 Jy ! Component: 200 - total flux cleaned = 0.00458097 Jy ! Total flux subtracted in 200 components = 0.00458097 Jy ! Clean residual min=-0.002797 max=0.002281 Jy/beam ! Clean residual mean=-0.000007 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.316516 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016733 Jy ! Component: 100 - total flux cleaned = 0.000199812 Jy ! Component: 150 - total flux cleaned = 0.000220047 Jy ! Component: 200 - total flux cleaned = 0.000249054 Jy ! Total flux subtracted in 200 components = 0.000249054 Jy ! Clean residual min=-0.002782 max=0.002267 Jy/beam ! Clean residual mean=-0.000008 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.316765 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.316765 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.366 mas, bmaj=1.627 mas, bpa=-67.13 degrees ! Estimated noise=0.922057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.22835e-05 Jy ! Component: 100 - total flux cleaned = -9.3081e-05 Jy ! Component: 150 - total flux cleaned = -7.15119e-05 Jy ! Component: 200 - total flux cleaned = -5.0809e-05 Jy ! Total flux subtracted in 200 components = -5.0809e-05 Jy ! Clean residual min=-0.002875 max=0.002786 Jy/beam ! Clean residual mean=-0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.316714 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.316714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105248Jy sigma=0.946166 ! Fit after self-cal, rms=0.105244Jy sigma=0.946146 wmodel /d2/scr/pima/rv101_uvs/J1610+2414_X_map.mod ! Writing 77 model components to file: /d2/scr/pima/rv101_uvs/J1610+2414_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1610+2414_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1610+2414_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1610+2414_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403933 Jy ! Component: 100 - total flux cleaned = -0.000817894 Jy ! Component: 150 - total flux cleaned = -0.00111743 Jy ! Component: 200 - total flux cleaned = -0.00136065 Jy ! Component: 250 - total flux cleaned = -0.0015154 Jy ! Component: 300 - total flux cleaned = -0.00166461 Jy ! Component: 350 - total flux cleaned = -0.00184449 Jy ! Component: 400 - total flux cleaned = -0.00201944 Jy ! Component: 450 - total flux cleaned = -0.00222387 Jy ! Component: 500 - total flux cleaned = -0.00248763 Jy ! Component: 550 - total flux cleaned = -0.00264772 Jy ! Component: 600 - total flux cleaned = -0.00277286 Jy ! Component: 650 - total flux cleaned = -0.00280276 Jy ! Component: 700 - total flux cleaned = -0.00271359 Jy ! Component: 750 - total flux cleaned = -0.0028014 Jy ! Component: 800 - total flux cleaned = -0.00280064 Jy ! Component: 850 - total flux cleaned = -0.00266156 Jy ! Component: 900 - total flux cleaned = -0.00252533 Jy ! Component: 950 - total flux cleaned = -0.00241861 Jy ! Component: 1000 - total flux cleaned = -0.00220793 Jy ! Component: 1050 - total flux cleaned = -0.00220825 Jy ! Component: 1100 - total flux cleaned = -0.00207996 Jy ! Component: 1150 - total flux cleaned = -0.0019792 Jy ! Component: 1200 - total flux cleaned = -0.00190517 Jy ! Component: 1250 - total flux cleaned = -0.00178266 Jy ! Component: 1300 - total flux cleaned = -0.00168591 Jy ! Component: 1350 - total flux cleaned = -0.0016382 Jy ! Component: 1400 - total flux cleaned = -0.00152019 Jy ! Component: 1450 - total flux cleaned = -0.00142702 Jy ! Component: 1500 - total flux cleaned = -0.00128872 Jy ! Component: 1550 - total flux cleaned = -0.001243 Jy ! Component: 1600 - total flux cleaned = -0.00119772 Jy ! Component: 1650 - total flux cleaned = -0.00106366 Jy ! Component: 1700 - total flux cleaned = -0.00088705 Jy ! Component: 1750 - total flux cleaned = -0.000821646 Jy ! Component: 1800 - total flux cleaned = -0.000692281 Jy ! Component: 1850 - total flux cleaned = -0.000628367 Jy ! Component: 1900 - total flux cleaned = -0.000522328 Jy ! Component: 1950 - total flux cleaned = -0.000396726 Jy ! Component: 2000 - total flux cleaned = -0.000272273 Jy ! Component: 2050 - total flux cleaned = -0.000149429 Jy ! Component: 2100 - total flux cleaned = -4.79462e-05 Jy ! Component: 2150 - total flux cleaned = 0.000112974 Jy ! Component: 2200 - total flux cleaned = 0.000272389 Jy ! Component: 2250 - total flux cleaned = 0.000331436 Jy ! Component: 2300 - total flux cleaned = 0.000507708 Jy ! Component: 2350 - total flux cleaned = 0.000624166 Jy ! Component: 2400 - total flux cleaned = 0.000701047 Jy ! Component: 2450 - total flux cleaned = 0.000738983 Jy ! Component: 2500 - total flux cleaned = 0.000852494 Jy ! Component: 2550 - total flux cleaned = 0.00102151 Jy ! Component: 2600 - total flux cleaned = 0.00107732 Jy ! Component: 2650 - total flux cleaned = 0.00120675 Jy ! Component: 2700 - total flux cleaned = 0.00129869 Jy ! Component: 2750 - total flux cleaned = 0.00137171 Jy ! Component: 2800 - total flux cleaned = 0.00144408 Jy ! Component: 2850 - total flux cleaned = 0.00155195 Jy ! Component: 2900 - total flux cleaned = 0.00162347 Jy ! Component: 2950 - total flux cleaned = 0.00169448 Jy ! Component: 3000 - total flux cleaned = 0.00176489 Jy ! Component: 3050 - total flux cleaned = 0.00185251 Jy ! Component: 3100 - total flux cleaned = 0.00199155 Jy ! Component: 3150 - total flux cleaned = 0.00202622 Jy ! Component: 3200 - total flux cleaned = 0.00204339 Jy ! Component: 3250 - total flux cleaned = 0.00214573 Jy ! Component: 3300 - total flux cleaned = 0.00223041 Jy ! Component: 3350 - total flux cleaned = 0.00226404 Jy ! Component: 3400 - total flux cleaned = 0.00236463 Jy ! Component: 3450 - total flux cleaned = 0.00233119 Jy ! Component: 3500 - total flux cleaned = 0.00241411 Jy ! Component: 3550 - total flux cleaned = 0.0024305 Jy ! Component: 3600 - total flux cleaned = 0.00251249 Jy ! Component: 3650 - total flux cleaned = 0.00256144 Jy ! Component: 3700 - total flux cleaned = 0.00264249 Jy ! Component: 3750 - total flux cleaned = 0.00269077 Jy ! Component: 3800 - total flux cleaned = 0.00272284 Jy ! Component: 3850 - total flux cleaned = 0.00267498 Jy ! Component: 3900 - total flux cleaned = 0.00277048 Jy ! Component: 3950 - total flux cleaned = 0.00284972 Jy ! Component: 4000 - total flux cleaned = 0.00286546 Jy ! Component: 4050 - total flux cleaned = 0.00297535 Jy ! Total flux subtracted in 4096 components = 0.00297539 Jy ! Clean residual min=-0.000989 max=0.000936 Jy/beam ! Clean residual mean=-0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.31969 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 310 components and 0.31969 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1610+2414_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.366 x 1.627 at -67.13 degrees (North through East) ! Clean map min=-0.0017706 max=0.26972 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.26972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.27496 0.27496 0.54992 1.09984 2.19968 4.39936 8.79872 17.5974 35.1949 70.3898 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.269 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1091.07 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1610+2414_X_uvs.log closed on Sat Nov 29 16:35:50 2014