! Started logfile: /d2/scr/pima/rv101_uvs/J1610+2414_S_uvs.log on Sat Nov 29 13:54:54 2014 obs /d2/scr/pima/rv101_uvs/J1610+2414_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_S_uva.fits ! AN table 1: 14 integrations on 21 of 21 possible baselines. ! AN table 2: 11 integrations on 3 of 3 possible baselines. ! AN table 3: 14 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.964573 visibilities/baseline/integration-bin. ! Found source: J1610+2414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2396 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1610+2414_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.042979Jy sigma=8.409773 ! Fit after self-cal, rms=0.776952Jy sigma=6.364430 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.1 mas, bmaj=5.172 mas, bpa=-44.61 degrees ! Estimated noise=3.2199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16818 Jy ! Component: 100 - total flux cleaned = 0.205577 Jy ! Total flux subtracted in 100 components = 0.205577 Jy ! Clean residual min=-0.010506 max=0.013097 Jy/beam ! Clean residual mean=-0.000051 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.205577 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.205577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075066Jy sigma=0.541197 ! Fit after self-cal, rms=0.075046Jy sigma=0.541092 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.28 mas, bmaj=6.273 mas, bpa=-44.38 degrees ! Estimated noise=1.93758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192451 Jy ! Component: 100 - total flux cleaned = 0.0272848 Jy ! Component: 150 - total flux cleaned = 0.0307583 Jy ! Component: 200 - total flux cleaned = 0.0320278 Jy ! Total flux subtracted in 200 components = 0.0320278 Jy ! Clean residual min=-0.005322 max=0.006221 Jy/beam ! Clean residual mean=0.000052 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.237605 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.237605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069468Jy sigma=0.511468 ! Fit after self-cal, rms=0.069433Jy sigma=0.511124 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.28 x 6.273 at -44.38 degrees (North through East) ! Clean map min=-0.0051002 max=0.22176 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.05 LA 1.02 NL 1.05 ! OV 1.01 PT 1.01 SC 1.14 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.02 LA 0.95 NL 1.07 ! OV 1.03 PT 1.04 SC 0.96 ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.07 LA 0.97 MK 0.98 ! NL 1.05 OV 1.01 PT 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! ! Fit before self-cal, rms=0.069433Jy sigma=0.511124 ! Fit after self-cal, rms=0.070112Jy sigma=0.502455 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.287 mas, bmaj=6.439 mas, bpa=-57.67 degrees ! Estimated noise=2.05464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472573 Jy ! Component: 100 - total flux cleaned = 0.00592607 Jy ! Component: 150 - total flux cleaned = 0.00588338 Jy ! Component: 200 - total flux cleaned = 0.00579991 Jy ! Total flux subtracted in 200 components = 0.00579991 Jy ! Clean residual min=-0.004846 max=0.006905 Jy/beam ! Clean residual mean=0.000073 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.243405 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.243405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069607Jy sigma=0.501838 ! Fit after self-cal, rms=0.069604Jy sigma=0.501807 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069604Jy sigma=0.501807 ! Fit after self-cal, rms=0.069968Jy sigma=0.501108 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.271 mas, bmaj=6.45 mas, bpa=-57.39 degrees ! Estimated noise=2.07208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210352 Jy ! Component: 100 - total flux cleaned = 0.00215865 Jy ! Component: 150 - total flux cleaned = 0.00204057 Jy ! Component: 200 - total flux cleaned = 0.00193486 Jy ! Total flux subtracted in 200 components = 0.00193486 Jy ! Clean residual min=-0.005030 max=0.006936 Jy/beam ! Clean residual mean=0.000075 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.24534 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.24534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069803Jy sigma=0.501117 ! Fit after self-cal, rms=0.069800Jy sigma=0.501108 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567913 Jy ! Component: 100 - total flux cleaned = 0.00800471 Jy ! Component: 150 - total flux cleaned = 0.0087582 Jy ! Component: 200 - total flux cleaned = 0.00886467 Jy ! Total flux subtracted in 200 components = 0.00886467 Jy ! Clean residual min=-0.005201 max=0.005073 Jy/beam ! Clean residual mean=0.000069 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.254204 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.254204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069303Jy sigma=0.497382 ! Fit after self-cal, rms=0.069256Jy sigma=0.497009 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069256Jy sigma=0.497009 ! Fit after self-cal, rms=0.065780Jy sigma=0.472128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.252 mas, bmaj=6.461 mas, bpa=-57.04 degrees ! Estimated noise=2.06999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130814 Jy ! Component: 100 - total flux cleaned = -0.00156957 Jy ! Component: 150 - total flux cleaned = -0.00179525 Jy ! Component: 200 - total flux cleaned = -0.00191465 Jy ! Total flux subtracted in 200 components = -0.00191465 Jy ! Clean residual min=-0.004455 max=0.005125 Jy/beam ! Clean residual mean=0.000023 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.25229 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.25229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065696Jy sigma=0.471500 ! Fit after self-cal, rms=0.065697Jy sigma=0.471402 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209548 Jy ! Component: 100 - total flux cleaned = -0.000278479 Jy ! Component: 150 - total flux cleaned = -0.000342113 Jy ! Component: 200 - total flux cleaned = -0.000402215 Jy ! Total flux subtracted in 200 components = -0.000402215 Jy ! Clean residual min=-0.004405 max=0.005090 Jy/beam ! Clean residual mean=0.000024 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.251888 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.251888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065664Jy sigma=0.471179 ! Fit after self-cal, rms=0.065665Jy sigma=0.471172 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065665Jy sigma=0.471172 ! Fit after self-cal, rms=0.065602Jy sigma=0.471030 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=10.87 mas, bpa=3.444 degrees ! Estimated noise=2.42047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048851 Jy ! Component: 100 - total flux cleaned = -0.000680942 Jy ! Component: 150 - total flux cleaned = -0.000880917 Jy ! Component: 200 - total flux cleaned = -0.000984526 Jy ! Total flux subtracted in 200 components = -0.000984526 Jy ! Clean residual min=-0.004807 max=0.006046 Jy/beam ! Clean residual mean=0.000034 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.250903 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.250903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065603Jy sigma=0.470995 ! Fit after self-cal, rms=0.065603Jy sigma=0.470934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.13802e-05 Jy ! Component: 100 - total flux cleaned = -0.000138523 Jy ! Component: 150 - total flux cleaned = -0.000176912 Jy ! Component: 200 - total flux cleaned = -0.000211518 Jy ! Total flux subtracted in 200 components = -0.000211518 Jy ! Clean residual min=-0.004812 max=0.006033 Jy/beam ! Clean residual mean=0.000034 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.250691 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.250691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065598Jy sigma=0.470884 ! Fit after self-cal, rms=0.065594Jy sigma=0.470844 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.233 mas, bmaj=6.473 mas, bpa=-56.68 degrees ! Estimated noise=2.06812 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.233 x 6.473 at -56.68 degrees (North through East) ! Clean map min=-0.0042874 max=0.23013 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=5.474 mas, bpa=-58.44 degrees ! Estimated noise=3.27638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173461 Jy ! Component: 100 - total flux cleaned = 0.213021 Jy ! Component: 150 - total flux cleaned = 0.227826 Jy ! Component: 200 - total flux cleaned = 0.236142 Jy ! Total flux subtracted in 200 components = 0.236142 Jy ! Clean residual min=-0.006692 max=0.007664 Jy/beam ! Clean residual mean=-0.000019 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.236142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.236142 Jy ! Inverting map and beam ! Estimated beam: bmin=5.233 mas, bmaj=6.473 mas, bpa=-56.68 degrees ! Estimated noise=2.06812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826194 Jy ! Component: 100 - total flux cleaned = 0.0121672 Jy ! Component: 150 - total flux cleaned = 0.0140192 Jy ! Component: 200 - total flux cleaned = 0.0144766 Jy ! Total flux subtracted in 200 components = 0.0144766 Jy ! Clean residual min=-0.004370 max=0.005110 Jy/beam ! Clean residual mean=0.000021 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.250619 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.250619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=10.87 mas, bpa=3.444 degrees ! Estimated noise=2.42047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360505 Jy ! Component: 100 - total flux cleaned = 0.000315893 Jy ! Component: 150 - total flux cleaned = 0.00039821 Jy ! Component: 200 - total flux cleaned = 0.000469444 Jy ! Total flux subtracted in 200 components = 0.000469444 Jy ! Clean residual min=-0.004993 max=0.006160 Jy/beam ! Clean residual mean=0.000038 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.251088 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.42921e-05 Jy ! Component: 100 - total flux cleaned = 3.47429e-05 Jy ! Component: 150 - total flux cleaned = 3.49866e-05 Jy ! Component: 200 - total flux cleaned = 3.33781e-05 Jy ! Total flux subtracted in 200 components = 3.33781e-05 Jy ! Clean residual min=-0.004971 max=0.006174 Jy/beam ! Clean residual mean=0.000037 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.251122 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.251122 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.233 mas, bmaj=6.473 mas, bpa=-56.68 degrees ! Estimated noise=2.06812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227354 Jy ! Component: 100 - total flux cleaned = -0.000332439 Jy ! Component: 150 - total flux cleaned = -0.00028308 Jy ! Component: 200 - total flux cleaned = -0.000237958 Jy ! Total flux subtracted in 200 components = -0.000237958 Jy ! Clean residual min=-0.004621 max=0.005001 Jy/beam ! Clean residual mean=0.000023 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.250884 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.250884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065647Jy sigma=0.471533 ! Fit after self-cal, rms=0.065635Jy sigma=0.471452 wmodel /d2/scr/pima/rv101_uvs/J1610+2414_S_map.mod ! Writing 70 model components to file: /d2/scr/pima/rv101_uvs/J1610+2414_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1610+2414_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1610+2414_S_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1610+2414_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737133 Jy ! Component: 100 - total flux cleaned = 0.00132881 Jy ! Component: 150 - total flux cleaned = 0.00201644 Jy ! Component: 200 - total flux cleaned = 0.00286071 Jy ! Component: 250 - total flux cleaned = 0.00378834 Jy ! Component: 300 - total flux cleaned = 0.00473355 Jy ! Component: 350 - total flux cleaned = 0.0056981 Jy ! Component: 400 - total flux cleaned = 0.00657195 Jy ! Component: 450 - total flux cleaned = 0.00741446 Jy ! Component: 500 - total flux cleaned = 0.00802544 Jy ! Component: 550 - total flux cleaned = 0.00846998 Jy ! Component: 600 - total flux cleaned = 0.0089016 Jy ! Component: 650 - total flux cleaned = 0.00945862 Jy ! Component: 700 - total flux cleaned = 0.00986268 Jy ! Component: 750 - total flux cleaned = 0.010082 Jy ! Component: 800 - total flux cleaned = 0.0105093 Jy ! Component: 850 - total flux cleaned = 0.0108005 Jy ! Component: 900 - total flux cleaned = 0.0111247 Jy ! Component: 950 - total flux cleaned = 0.0115961 Jy ! Component: 1000 - total flux cleaned = 0.0118633 Jy ! Component: 1050 - total flux cleaned = 0.0121986 Jy ! Component: 1100 - total flux cleaned = 0.0124538 Jy ! Component: 1150 - total flux cleaned = 0.0128462 Jy ! Component: 1200 - total flux cleaned = 0.0132987 Jy ! Component: 1250 - total flux cleaned = 0.0136725 Jy ! Component: 1300 - total flux cleaned = 0.0139052 Jy ! Component: 1350 - total flux cleaned = 0.0141671 Jy ! Component: 1400 - total flux cleaned = 0.0144243 Jy ! Component: 1450 - total flux cleaned = 0.0145834 Jy ! Component: 1500 - total flux cleaned = 0.0149255 Jy ! Component: 1550 - total flux cleaned = 0.0151395 Jy ! Component: 1600 - total flux cleaned = 0.0153801 Jy ! Component: 1650 - total flux cleaned = 0.0156765 Jy ! Component: 1700 - total flux cleaned = 0.015968 Jy ! Component: 1750 - total flux cleaned = 0.0161406 Jy ! Component: 1800 - total flux cleaned = 0.0163673 Jy ! Component: 1850 - total flux cleaned = 0.0165907 Jy ! Component: 1900 - total flux cleaned = 0.016728 Jy ! Component: 1950 - total flux cleaned = 0.0170542 Jy ! Component: 2000 - total flux cleaned = 0.0172685 Jy ! Component: 2050 - total flux cleaned = 0.0175069 Jy ! Component: 2100 - total flux cleaned = 0.0177174 Jy ! Component: 2150 - total flux cleaned = 0.0179252 Jy ! Component: 2200 - total flux cleaned = 0.0182077 Jy ! Component: 2250 - total flux cleaned = 0.0183855 Jy ! Component: 2300 - total flux cleaned = 0.0185868 Jy ! Component: 2350 - total flux cleaned = 0.0188607 Jy ! Component: 2400 - total flux cleaned = 0.0190576 Jy ! Component: 2450 - total flux cleaned = 0.0192528 Jy ! Component: 2500 - total flux cleaned = 0.0194461 Jy ! Component: 2550 - total flux cleaned = 0.019614 Jy ! Component: 2600 - total flux cleaned = 0.0198514 Jy ! Component: 2650 - total flux cleaned = 0.0201332 Jy ! Component: 2700 - total flux cleaned = 0.0203426 Jy ! Component: 2750 - total flux cleaned = 0.0205272 Jy ! Component: 2800 - total flux cleaned = 0.0207099 Jy ! Component: 2850 - total flux cleaned = 0.0208004 Jy ! Component: 2900 - total flux cleaned = 0.0209802 Jy ! Component: 2950 - total flux cleaned = 0.021114 Jy ! Component: 3000 - total flux cleaned = 0.0212247 Jy ! Component: 3050 - total flux cleaned = 0.0214223 Jy ! Component: 3100 - total flux cleaned = 0.0215529 Jy ! Component: 3150 - total flux cleaned = 0.0216391 Jy ! Component: 3200 - total flux cleaned = 0.0217894 Jy ! Component: 3250 - total flux cleaned = 0.0219598 Jy ! Component: 3300 - total flux cleaned = 0.0220865 Jy ! Component: 3350 - total flux cleaned = 0.0222334 Jy ! Component: 3400 - total flux cleaned = 0.0223167 Jy ! Component: 3450 - total flux cleaned = 0.0225239 Jy ! Component: 3500 - total flux cleaned = 0.022668 Jy ! Component: 3550 - total flux cleaned = 0.0227905 Jy ! Component: 3600 - total flux cleaned = 0.0228921 Jy ! Component: 3650 - total flux cleaned = 0.0230536 Jy ! Component: 3700 - total flux cleaned = 0.0231539 Jy ! Component: 3750 - total flux cleaned = 0.0233133 Jy ! Component: 3800 - total flux cleaned = 0.0233926 Jy ! Component: 3850 - total flux cleaned = 0.0235303 Jy ! Component: 3900 - total flux cleaned = 0.0236479 Jy ! Component: 3950 - total flux cleaned = 0.0237647 Jy ! Component: 4000 - total flux cleaned = 0.0239196 Jy ! Component: 4050 - total flux cleaned = 0.0240927 Jy ! Total flux subtracted in 4096 components = 0.0242458 Jy ! Clean residual min=-0.001166 max=0.001097 Jy/beam ! Clean residual mean=0.000007 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.27513 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 337 components and 0.27513 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1610+2414_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.233 x 6.473 at -56.68 degrees (North through East) ! Clean map min=-0.0024041 max=0.22889 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1610+2414_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344899 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.452043 0.452043 0.904085 1.80817 3.61634 7.23268 14.4654 28.9307 57.8615 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.228 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 663.654 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1610+2414_S_uvs.log closed on Sat Nov 29 13:54:59 2014