! Started logfile: /d2/scr/pima/rv101_uvs/J1607-3331_S_uvs.log on Sat Nov 29 13:54:48 2014
obs /d2/scr/pima/rv101_uvs/J1607-3331_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1607-3331_S_uva.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! AN table 2: 17 integrations on 21 of 21 possible baselines.
! AN table 3: 16 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.924883 visibilities/baseline/integration-bin.
! Found source: J1607-3331
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3152 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1607-3331_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.014800Jy  sigma=6.184504
! Fit after  self-cal, rms=0.831278Jy  sigma=5.032830
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.19 mas, bmaj=15.77 mas, bpa=-5.118 degrees
! Estimated noise=3.67463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13417 Jy
! Component: 100  -  total flux cleaned = 0.165937 Jy
! Total flux subtracted in 100 components = 0.165937 Jy
! Clean residual min=-0.012141 max=0.012943 Jy/beam
! Clean residual mean=-0.000056 rms=0.003438 Jy/beam
! Combined flux in latest and established models = 0.165937 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.165937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097569Jy  sigma=0.527217
! Fit after  self-cal, rms=0.097602Jy  sigma=0.527152
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.938 mas, bmaj=17.64 mas, bpa=-6.172 degrees
! Estimated noise=2.2357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176451 Jy
! Component: 100  -  total flux cleaned = 0.0270174 Jy
! Component: 150  -  total flux cleaned = 0.0308769 Jy
! Component: 200  -  total flux cleaned = 0.0315463 Jy
! Total flux subtracted in 200 components = 0.0315463 Jy
! Clean residual min=-0.007937 max=0.008075 Jy/beam
! Clean residual mean=-0.000075 rms=0.001910 Jy/beam
! Combined flux in latest and established models = 0.197483 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 50 components and 0.197483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094399Jy  sigma=0.507132
! Fit after  self-cal, rms=0.094437Jy  sigma=0.506893
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.938 x 17.64 at -6.172 degrees (North through East)
! Clean map  min=-0.0077227  max=0.17387 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.93     HN        1.16     LA        1.08     NL        1.11     
!   OV        1.01     PT        1.08     SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00     KP        1.05     LA        0.87     MK        0.94     
!   OV        0.97     PT        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.91     HN        0.96     LA        0.84     NL        1.00     
!   OV        0.85     PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.094437Jy  sigma=0.506893
! Fit after  self-cal, rms=0.093136Jy  sigma=0.500793
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.935 mas, bmaj=17.74 mas, bpa=-6.195 degrees
! Estimated noise=2.22256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00161499 Jy
! Component: 100  -  total flux cleaned = -0.00139872 Jy
! Component: 150  -  total flux cleaned = -0.00102821 Jy
! Component: 200  -  total flux cleaned = -0.000791508 Jy
! Total flux subtracted in 200 components = -0.000791508 Jy
! Clean residual min=-0.006691 max=0.006430 Jy/beam
! Clean residual mean=-0.000058 rms=0.001627 Jy/beam
! Combined flux in latest and established models = 0.196691 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 65 components and 0.196691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092857Jy  sigma=0.499674
! Fit after  self-cal, rms=0.092893Jy  sigma=0.499566
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092893Jy  sigma=0.499566
! Fit after  self-cal, rms=0.093453Jy  sigma=0.493703
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.906 mas, bmaj=17.76 mas, bpa=-6.219 degrees
! Estimated noise=2.24398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372206 Jy
! Component: 100  -  total flux cleaned = 0.00465495 Jy
! Component: 150  -  total flux cleaned = 0.00493824 Jy
! Component: 200  -  total flux cleaned = 0.00505763 Jy
! Total flux subtracted in 200 components = 0.00505763 Jy
! Clean residual min=-0.006666 max=0.004781 Jy/beam
! Clean residual mean=-0.000001 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.201749 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.201749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093266Jy  sigma=0.492713
! Fit after  self-cal, rms=0.093384Jy  sigma=0.492554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126278 Jy
! Component: 100  -  total flux cleaned = 0.000270053 Jy
! Component: 150  -  total flux cleaned = 0.000351574 Jy
! Component: 200  -  total flux cleaned = 0.000352922 Jy
! Total flux subtracted in 200 components = 0.000352922 Jy
! Clean residual min=-0.006504 max=0.005015 Jy/beam
! Clean residual mean=-0.000001 rms=0.001430 Jy/beam
! Combined flux in latest and established models = 0.202102 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.202102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093326Jy  sigma=0.492394
! Fit after  self-cal, rms=0.093326Jy  sigma=0.492372
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093326Jy  sigma=0.492372
! Fit after  self-cal, rms=0.091873Jy  sigma=0.484389
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=17.77 mas, bpa=-6.221 degrees
! Estimated noise=2.2295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.76763e-05 Jy
! Component: 100  -  total flux cleaned = -8.14719e-05 Jy
! Component: 150  -  total flux cleaned = -8.11069e-05 Jy
! Component: 200  -  total flux cleaned = -5.09114e-05 Jy
! Total flux subtracted in 200 components = -5.09114e-05 Jy
! Clean residual min=-0.006328 max=0.005240 Jy/beam
! Clean residual mean=-0.000001 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.202051 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.202051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091852Jy  sigma=0.484265
! Fit after  self-cal, rms=0.091854Jy  sigma=0.484250
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.12557e-05 Jy
! Component: 100  -  total flux cleaned = -3.02359e-05 Jy
! Component: 150  -  total flux cleaned = -3.78102e-06 Jy
! Component: 200  -  total flux cleaned = -5.14674e-06 Jy
! Total flux subtracted in 200 components = -5.14674e-06 Jy
! Clean residual min=-0.006290 max=0.005180 Jy/beam
! Clean residual mean=-0.000001 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.202046 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 98 components and 0.202046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091837Jy  sigma=0.484172
! Fit after  self-cal, rms=0.091837Jy  sigma=0.484170
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091837Jy  sigma=0.484170
! Fit after  self-cal, rms=0.091720Jy  sigma=0.484133
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.95 mas, bmaj=20.73 mas, bpa=-7.537 degrees
! Estimated noise=2.63002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124334 Jy
! Component: 100  -  total flux cleaned = 8.02606e-05 Jy
! Component: 150  -  total flux cleaned = 4.59009e-05 Jy
! Component: 200  -  total flux cleaned = 4.60301e-05 Jy
! Total flux subtracted in 200 components = 4.60301e-05 Jy
! Clean residual min=-0.005861 max=0.005065 Jy/beam
! Clean residual mean=-0.000000 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.202092 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 107 components and 0.202092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091709Jy  sigma=0.484115
! Fit after  self-cal, rms=0.091701Jy  sigma=0.484094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.06585e-05 Jy
! Component: 100  -  total flux cleaned = 7.81171e-05 Jy
! Component: 150  -  total flux cleaned = 7.41232e-05 Jy
! Component: 200  -  total flux cleaned = 4.77547e-05 Jy
! Total flux subtracted in 200 components = 4.77547e-05 Jy
! Clean residual min=-0.005794 max=0.005028 Jy/beam
! Clean residual mean=-0.000000 rms=0.001540 Jy/beam
! Combined flux in latest and established models = 0.20214 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 112 components and 0.20214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091707Jy  sigma=0.484060
! Fit after  self-cal, rms=0.091702Jy  sigma=0.484048
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.893 mas, bmaj=17.78 mas, bpa=-6.217 degrees
! Estimated noise=2.22452 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.893 x 17.78 at -6.217 degrees (North through East)
! Clean map  min=-0.0060861  max=0.17227 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.173 mas, bmaj=15.94 mas, bpa=-5.265 degrees
! Estimated noise=3.63598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132433 Jy
! Component: 100  -  total flux cleaned = 0.164671 Jy
! Component: 150  -  total flux cleaned = 0.180186 Jy
! Component: 200  -  total flux cleaned = 0.185625 Jy
! Total flux subtracted in 200 components = 0.185625 Jy
! Clean residual min=-0.009783 max=0.009270 Jy/beam
! Clean residual mean=-0.000028 rms=0.002664 Jy/beam
! Combined flux in latest and established models = 0.185625 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.185625 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.893 mas, bmaj=17.78 mas, bpa=-6.217 degrees
! Estimated noise=2.22452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107264 Jy
! Component: 100  -  total flux cleaned = 0.0158102 Jy
! Component: 150  -  total flux cleaned = 0.0167299 Jy
! Component: 200  -  total flux cleaned = 0.0172293 Jy
! Total flux subtracted in 200 components = 0.0172293 Jy
! Clean residual min=-0.005854 max=0.004656 Jy/beam
! Clean residual mean=-0.000001 rms=0.001309 Jy/beam
! Combined flux in latest and established models = 0.202855 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 78 components and 0.202855 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.95 mas, bmaj=20.73 mas, bpa=-7.537 degrees
! Estimated noise=2.63002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159342 Jy
! Component: 100  -  total flux cleaned = 0.00178443 Jy
! Component: 150  -  total flux cleaned = 0.00201205 Jy
! Component: 200  -  total flux cleaned = 0.00188662 Jy
! Total flux subtracted in 200 components = 0.00188662 Jy
! Clean residual min=-0.004945 max=0.004505 Jy/beam
! Clean residual mean=0.000009 rms=0.001444 Jy/beam
! Combined flux in latest and established models = 0.204741 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111986 Jy
! Component: 100  -  total flux cleaned = -0.00011171 Jy
! Component: 150  -  total flux cleaned = -0.00016008 Jy
! Component: 200  -  total flux cleaned = -0.000158509 Jy
! Total flux subtracted in 200 components = -0.000158509 Jy
! Clean residual min=-0.004855 max=0.004509 Jy/beam
! Clean residual mean=0.000009 rms=0.001430 Jy/beam
! Combined flux in latest and established models = 0.204583 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 0.204583 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.893 mas, bmaj=17.78 mas, bpa=-6.217 degrees
! Estimated noise=2.22452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275106 Jy
! Component: 100  -  total flux cleaned = -0.000345084 Jy
! Component: 150  -  total flux cleaned = -0.000534739 Jy
! Component: 200  -  total flux cleaned = -0.000591758 Jy
! Total flux subtracted in 200 components = -0.000591758 Jy
! Clean residual min=-0.004957 max=0.004534 Jy/beam
! Clean residual mean=0.000005 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.203991 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 137 components and 0.203991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091237Jy  sigma=0.482359
! Fit after  self-cal, rms=0.091177Jy  sigma=0.481825
wmodel /d2/scr/pima/rv101_uvs/J1607-3331_S_map.mod
! Writing 137 model components to file: /d2/scr/pima/rv101_uvs/J1607-3331_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J1607-3331_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1607-3331_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J1607-3331_S_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1607-3331_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014786 Jy
! Component: 100  -  total flux cleaned = -0.0019178 Jy
! Component: 150  -  total flux cleaned = -0.00212306 Jy
! Component: 200  -  total flux cleaned = -0.00244063 Jy
! Component: 250  -  total flux cleaned = -0.00262097 Jy
! Component: 300  -  total flux cleaned = -0.00285413 Jy
! Component: 350  -  total flux cleaned = -0.00318976 Jy
! Component: 400  -  total flux cleaned = -0.00362419 Jy
! Component: 450  -  total flux cleaned = -0.00414875 Jy
! Component: 500  -  total flux cleaned = -0.00455599 Jy
! Component: 550  -  total flux cleaned = -0.00505109 Jy
! Component: 600  -  total flux cleaned = -0.00538724 Jy
! Component: 650  -  total flux cleaned = -0.0056213 Jy
! Component: 700  -  total flux cleaned = -0.00589632 Jy
! Component: 750  -  total flux cleaned = -0.00598649 Jy
! Component: 800  -  total flux cleaned = -0.00616151 Jy
! Component: 850  -  total flux cleaned = -0.00620286 Jy
! Component: 900  -  total flux cleaned = -0.00628606 Jy
! Component: 950  -  total flux cleaned = -0.00620311 Jy
! Component: 1000  -  total flux cleaned = -0.00616316 Jy
! Component: 1050  -  total flux cleaned = -0.00632309 Jy
! Component: 1100  -  total flux cleaned = -0.00632353 Jy
! Component: 1150  -  total flux cleaned = -0.0063619 Jy
! Component: 1200  -  total flux cleaned = -0.00636232 Jy
! Component: 1250  -  total flux cleaned = -0.00647447 Jy
! Component: 1300  -  total flux cleaned = -0.00647414 Jy
! Component: 1350  -  total flux cleaned = -0.0065827 Jy
! Component: 1400  -  total flux cleaned = -0.00651107 Jy
! Component: 1450  -  total flux cleaned = -0.00661574 Jy
! Component: 1500  -  total flux cleaned = -0.00664889 Jy
! Component: 1550  -  total flux cleaned = -0.00658069 Jy
! Component: 1600  -  total flux cleaned = -0.00654763 Jy
! Component: 1650  -  total flux cleaned = -0.00651472 Jy
! Component: 1700  -  total flux cleaned = -0.00651436 Jy
! Component: 1750  -  total flux cleaned = -0.00648191 Jy
! Component: 1800  -  total flux cleaned = -0.00641855 Jy
! Component: 1850  -  total flux cleaned = -0.0064182 Jy
! Component: 1900  -  total flux cleaned = -0.00635676 Jy
! Component: 1950  -  total flux cleaned = -0.00632612 Jy
! Component: 2000  -  total flux cleaned = -0.00632601 Jy
! Component: 2050  -  total flux cleaned = -0.00629596 Jy
! Component: 2100  -  total flux cleaned = -0.00623619 Jy
! Component: 2150  -  total flux cleaned = -0.00600216 Jy
! Component: 2200  -  total flux cleaned = -0.00597324 Jy
! Component: 2250  -  total flux cleaned = -0.00594445 Jy
! Component: 2300  -  total flux cleaned = -0.00594426 Jy
! Component: 2350  -  total flux cleaned = -0.00585978 Jy
! Component: 2400  -  total flux cleaned = -0.00585952 Jy
! Component: 2450  -  total flux cleaned = -0.00583168 Jy
! Component: 2500  -  total flux cleaned = -0.00577693 Jy
! Component: 2550  -  total flux cleaned = -0.0057225 Jy
! Component: 2600  -  total flux cleaned = -0.00572234 Jy
! Component: 2650  -  total flux cleaned = -0.00572242 Jy
! Component: 2700  -  total flux cleaned = -0.00569643 Jy
! Component: 2750  -  total flux cleaned = -0.00574862 Jy
! Component: 2800  -  total flux cleaned = -0.00569711 Jy
! Component: 2850  -  total flux cleaned = -0.00567181 Jy
! Component: 2900  -  total flux cleaned = -0.0057478 Jy
! Component: 2950  -  total flux cleaned = -0.00567201 Jy
! Component: 3000  -  total flux cleaned = -0.00562239 Jy
! Component: 3050  -  total flux cleaned = -0.00559739 Jy
! Component: 3100  -  total flux cleaned = -0.00557291 Jy
! Component: 3150  -  total flux cleaned = -0.00557305 Jy
! Component: 3200  -  total flux cleaned = -0.00550089 Jy
! Component: 3250  -  total flux cleaned = -0.00554905 Jy
! Component: 3300  -  total flux cleaned = -0.00554908 Jy
! Component: 3350  -  total flux cleaned = -0.00547829 Jy
! Component: 3400  -  total flux cleaned = -0.00557256 Jy
! Component: 3450  -  total flux cleaned = -0.0056192 Jy
! Component: 3500  -  total flux cleaned = -0.00557275 Jy
! Component: 3550  -  total flux cleaned = -0.00559587 Jy
! Component: 3600  -  total flux cleaned = -0.0055043 Jy
! Component: 3650  -  total flux cleaned = -0.00550423 Jy
! Component: 3700  -  total flux cleaned = -0.00548152 Jy
! Component: 3750  -  total flux cleaned = -0.0054815 Jy
! Component: 3800  -  total flux cleaned = -0.00543659 Jy
! Component: 3850  -  total flux cleaned = -0.00539179 Jy
! Component: 3900  -  total flux cleaned = -0.00534726 Jy
! Component: 3950  -  total flux cleaned = -0.005281 Jy
! Component: 4000  -  total flux cleaned = -0.00534711 Jy
! Component: 4050  -  total flux cleaned = -0.00528136 Jy
! Total flux subtracted in 4096 components = -0.0053032 Jy
! Clean residual min=-0.001228 max=0.001249 Jy/beam
! Clean residual mean=0.000006 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.198688 Jy
keep
! Adding 355 model components to the UV plane model.
! The established model now contains 492 components and 0.198688 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J1607-3331_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.893 x 17.78 at -6.217 degrees (North through East)
! Clean map  min=-0.0034829  max=0.16798 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1607-3331_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.16798 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000429281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.766663 0.766663 1.53333 3.06665 6.1333 12.2666 24.5332 49.0664 98.1329
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.167 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  391.306 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J1607-3331_S_uvs.log closed on Sat Nov 29 13:54:52 2014