! Started logfile: /d2/scr/pima/rv101_uvs/J1354-0206_X_uvs.log on Sat Nov 29 16:34:48 2014 obs /d2/scr/pima/rv101_uvs/J1354-0206_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1354-0206_X_uva.fits ! AN table 1: 29 integrations on 36 of 36 possible baselines. ! AN table 2: 27 integrations on 6 of 6 possible baselines. ! AN table 3: 9 integrations on 15 of 15 possible baselines. ! AN table 4: 9 integrations on 1 of 1 possible baselines. ! AN table 5: 9 integrations on 21 of 21 possible baselines. ! AN table 6: 9 integrations on 15 of 15 possible baselines. ! AN table 7: 92 integrations on 1 of 1 possible baselines. ! AN table 8: 151 integrations on 3 of 3 possible baselines. ! AN table 9: 79 integrations on 6 of 6 possible baselines. ! AN table 10: 24 integrations on 6 of 6 possible baselines. ! AN table 11: 37 integrations on 6 of 6 possible baselines. ! AN table 12: 24 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.693708 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8688 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1354-0206_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 199 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 184 telescope corrections were flagged in sub-array 7. ! A total of 120 telescope corrections were flagged in sub-array 8. ! A total of 77 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 61 telescope corrections were flagged in sub-array 11. ! A total of 51 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 199 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 184 telescope corrections were flagged in sub-array 7. ! A total of 120 telescope corrections were flagged in sub-array 8. ! A total of 77 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 61 telescope corrections were flagged in sub-array 11. ! A total of 51 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 199 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 184 telescope corrections were flagged in sub-array 7. ! A total of 453 telescope corrections were flagged in sub-array 8. ! A total of 175 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 61 telescope corrections were flagged in sub-array 11. ! A total of 51 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 199 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 184 telescope corrections were flagged in sub-array 7. ! A total of 453 telescope corrections were flagged in sub-array 8. ! A total of 175 telescope corrections were flagged in sub-array 9. ! A total of 36 telescope corrections were flagged in sub-array 10. ! A total of 61 telescope corrections were flagged in sub-array 11. ! A total of 51 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=1.252126Jy sigma=6.560710 ! Fit after self-cal, rms=0.438221Jy sigma=2.472896 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7317 mas, bmaj=1.968 mas, bpa=-8.677 degrees ! Estimated noise=2.17813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.458945 Jy ! Component: 100 - total flux cleaned = 0.577693 Jy ! Total flux subtracted in 100 components = 0.577693 Jy ! Clean residual min=-0.022515 max=0.051651 Jy/beam ! Clean residual mean=0.000304 rms=0.005333 Jy/beam ! Combined flux in latest and established models = 0.577693 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.577693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283410Jy sigma=1.092169 ! Fit after self-cal, rms=0.283426Jy sigma=1.091755 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574731 Jy ! Component: 100 - total flux cleaned = 0.0896754 Jy ! Total flux subtracted in 100 components = 0.0896754 Jy ! Clean residual min=-0.017304 max=0.018817 Jy/beam ! Clean residual mean=0.000205 rms=0.003797 Jy/beam ! Combined flux in latest and established models = 0.667368 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.667368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263153Jy sigma=0.970275 ! Fit after self-cal, rms=0.263031Jy sigma=0.969581 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.784 mas, bmaj=2.151 mas, bpa=-6.133 degrees ! Estimated noise=1.9065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345315 Jy ! Component: 100 - total flux cleaned = 0.0520314 Jy ! Component: 150 - total flux cleaned = 0.0562259 Jy ! Component: 200 - total flux cleaned = 0.0584849 Jy ! Total flux subtracted in 200 components = 0.0584849 Jy ! Clean residual min=-0.021277 max=0.028848 Jy/beam ! Clean residual mean=0.001315 rms=0.004704 Jy/beam ! Combined flux in latest and established models = 0.725853 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 0.725853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254190Jy sigma=0.952839 ! Fit after self-cal, rms=0.254083Jy sigma=0.952324 ! Inverting map ! Added new window around map position (0.2, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162948 Jy ! Component: 100 - total flux cleaned = 0.0134601 Jy ! Component: 150 - total flux cleaned = 0.0123049 Jy ! Component: 200 - total flux cleaned = 0.012308 Jy ! Total flux subtracted in 200 components = 0.012308 Jy ! Clean residual min=-0.019017 max=0.024810 Jy/beam ! Clean residual mean=0.001187 rms=0.004229 Jy/beam ! Combined flux in latest and established models = 0.738161 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.738161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247406Jy sigma=0.937873 ! Fit after self-cal, rms=0.246817Jy sigma=0.936166 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.784 x 2.151 at -6.133 degrees (North through East) ! Clean map min=-0.019777 max=0.61889 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.01 LA 1.04 MK 1.11 ! NL 0.96 OV 0.96 PT 1.04 SC 1.04 ! WF 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.01 LA 1.06 MK 1.07 NL 1.12 ! OV 0.97 PT 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 KP 1.00* LA 1.09 MK 1.05 ! OV 0.98 PT 1.06 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* ! ! A total of 333 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.98 NY 1.00 ON 0.83 WF 0.91 ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.04 MA 1.06 NL 0.91 ON 0.92 ! ! A total of 27 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 0.93 MA 1.02 ON 0.89 WF 0.88 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MA 0.00* ON 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.05 LA 1.01 MK 1.08 ! NL 0.98 OV 0.93 PT 0.91 SC 1.16 ! WF 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00 NL 1.01 SC 1.10 WF 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.05 LA 0.99 MK 1.03 NL 1.06 ! OV 0.96 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 KP 1.00* LA 1.08 MK 0.99 ! OV 0.97 PT 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* ! ! A total of 333 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.97 MA 1.07 NL 1.01 ON 0.86 ! ! A total of 27 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MA 0.00* ON 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.07 LA 1.07 MK 1.03 ! NL 0.99 OV 1.02 PT 0.93 SC 1.06 ! WF 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.06 NL 1.01 SC 1.07 WF 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.06 LA 1.06 MK 1.01 NL 1.14 ! OV 1.03 PT 0.88 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.13 KP 1.00* LA 1.13 MK 1.03 ! OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 141 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.04 MA 1.07 NL 1.06 ON 1.01 ! ! A total of 27 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.04 MA 1.11 ON 1.01 WF 0.84 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MA 0.00* ON 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.13 LA 1.06 MK 1.17 ! NL 1.02 OV 0.99 PT 0.95 SC 1.10 ! WF 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.12 NL 1.04 SC 1.02 WF 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.12 LA 0.96 MK 1.09 NL 1.18 ! OV 1.06 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.16 KP 1.00* LA 1.13 MK 1.07 ! OV 1.02 PT 0.93 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 141 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* ON 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* MA 0.00* ON 0.00* ! ! ! Fit before self-cal, rms=0.246817Jy sigma=0.936166 ! Fit after self-cal, rms=0.204783Jy sigma=0.884383 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7881 mas, bmaj=2.212 mas, bpa=-6.62 degrees ! Estimated noise=1.96352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00761411 Jy ! Component: 100 - total flux cleaned = -0.00926084 Jy ! Component: 150 - total flux cleaned = -0.00985824 Jy ! Component: 200 - total flux cleaned = -0.0100318 Jy ! Total flux subtracted in 200 components = -0.0100318 Jy ! Clean residual min=-0.012562 max=0.012234 Jy/beam ! Clean residual mean=0.000870 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 0.72813 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.728129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204318Jy sigma=0.880374 ! Fit after self-cal, rms=0.204229Jy sigma=0.879918 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204229Jy sigma=0.879918 ! Fit after self-cal, rms=0.203905Jy sigma=0.879466 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7886 mas, bmaj=2.216 mas, bpa=-6.689 degrees ! Estimated noise=1.95618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00431993 Jy ! Component: 100 - total flux cleaned = -0.00485954 Jy ! Component: 150 - total flux cleaned = -0.00534532 Jy ! Component: 200 - total flux cleaned = -0.00578738 Jy ! Total flux subtracted in 200 components = -0.00578738 Jy ! Clean residual min=-0.012236 max=0.012028 Jy/beam ! Clean residual mean=0.000865 rms=0.003024 Jy/beam ! Combined flux in latest and established models = 0.722342 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.722342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203603Jy sigma=0.877263 ! Fit after self-cal, rms=0.203590Jy sigma=0.877145 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000826172 Jy ! Component: 100 - total flux cleaned = -0.00123245 Jy ! Component: 150 - total flux cleaned = -0.00161639 Jy ! Component: 200 - total flux cleaned = -0.00209681 Jy ! Total flux subtracted in 200 components = -0.00209681 Jy ! Clean residual min=-0.011976 max=0.011917 Jy/beam ! Clean residual mean=0.000893 rms=0.003001 Jy/beam ! Combined flux in latest and established models = 0.720245 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.720245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203368Jy sigma=0.876310 ! Fit after self-cal, rms=0.203356Jy sigma=0.876268 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203356Jy sigma=0.876268 ! Fit after self-cal, rms=0.201953Jy sigma=0.871603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7893 mas, bmaj=2.221 mas, bpa=-6.776 degrees ! Estimated noise=1.94592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0051814 Jy ! Component: 100 - total flux cleaned = -0.00680501 Jy ! Component: 150 - total flux cleaned = -0.0079762 Jy ! Component: 200 - total flux cleaned = -0.00868672 Jy ! Total flux subtracted in 200 components = -0.00868672 Jy ! Clean residual min=-0.011023 max=0.011367 Jy/beam ! Clean residual mean=0.000805 rms=0.002844 Jy/beam ! Combined flux in latest and established models = 0.711558 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 0.711559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201764Jy sigma=0.869821 ! Fit after self-cal, rms=0.201774Jy sigma=0.869722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101612 Jy ! Component: 100 - total flux cleaned = -0.00134469 Jy ! Component: 150 - total flux cleaned = -0.00185622 Jy ! Component: 200 - total flux cleaned = -0.00234245 Jy ! Total flux subtracted in 200 components = -0.00234245 Jy ! Clean residual min=-0.010896 max=0.011258 Jy/beam ! Clean residual mean=0.000838 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.709216 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.709216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201624Jy sigma=0.869217 ! Fit after self-cal, rms=0.201616Jy sigma=0.869194 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201616Jy sigma=0.869194 ! Fit after self-cal, rms=0.201393Jy sigma=0.868530 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=3.416 mas, bpa=-1.289 degrees ! Estimated noise=2.53461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00548001 Jy ! Component: 100 - total flux cleaned = -0.00736097 Jy ! Component: 150 - total flux cleaned = -0.00886503 Jy ! Component: 200 - total flux cleaned = -0.00998095 Jy ! Total flux subtracted in 200 components = -0.00998095 Jy ! Clean residual min=-0.014992 max=0.015156 Jy/beam ! Clean residual mean=0.002133 rms=0.004639 Jy/beam ! Combined flux in latest and established models = 0.699235 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.699235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201299Jy sigma=0.868634 ! Fit after self-cal, rms=0.201268Jy sigma=0.868177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166099 Jy ! Component: 100 - total flux cleaned = -0.0024359 Jy ! Component: 150 - total flux cleaned = -0.00272914 Jy ! Component: 200 - total flux cleaned = -0.00299547 Jy ! Total flux subtracted in 200 components = -0.00299547 Jy ! Clean residual min=-0.015127 max=0.015474 Jy/beam ! Clean residual mean=0.002228 rms=0.004647 Jy/beam ! Combined flux in latest and established models = 0.69624 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 103 components and 0.69624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201265Jy sigma=0.868707 ! Fit after self-cal, rms=0.201255Jy sigma=0.868619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7899 mas, bmaj=2.226 mas, bpa=-6.833 degrees ! Estimated noise=1.93732 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7899 x 2.226 at -6.833 degrees (North through East) ! Clean map min=-0.018659 max=0.6108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201255Jy sigma=0.868619 ! Fit after self-cal, rms=0.197667Jy sigma=0.829061 ! Inverting map and beam ! Estimated beam: bmin=0.7904 mas, bmaj=2.232 mas, bpa=-6.911 degrees ! Estimated noise=1.92823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00333911 Jy ! Component: 100 - total flux cleaned = -0.00413605 Jy ! Component: 150 - total flux cleaned = -0.00425596 Jy ! Component: 200 - total flux cleaned = -0.00435385 Jy ! Total flux subtracted in 200 components = -0.00435385 Jy ! Clean residual min=-0.009741 max=0.011275 Jy/beam ! Clean residual mean=0.000894 rms=0.002660 Jy/beam ! Combined flux in latest and established models = 0.691886 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.691886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197540Jy sigma=0.827528 ! Fit after self-cal, rms=0.197535Jy sigma=0.827475 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68669e-05 Jy ! Component: 100 - total flux cleaned = 0.000178223 Jy ! Component: 150 - total flux cleaned = 9.25726e-05 Jy ! Component: 200 - total flux cleaned = 9.52213e-05 Jy ! Total flux subtracted in 200 components = 9.52213e-05 Jy ! Clean residual min=-0.009919 max=0.011234 Jy/beam ! Clean residual mean=0.000893 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.691981 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.691981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197444Jy sigma=0.827053 ! Fit after self-cal, rms=0.197442Jy sigma=0.827034 ! Inverting map ! Added new window around map position (-5.8, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108043 Jy ! Component: 100 - total flux cleaned = 0.0157686 Jy ! Component: 150 - total flux cleaned = 0.0175333 Jy ! Component: 200 - total flux cleaned = 0.0181324 Jy ! Total flux subtracted in 200 components = 0.0181324 Jy ! Clean residual min=-0.009318 max=0.010142 Jy/beam ! Clean residual mean=0.000673 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.710113 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.710113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196515Jy sigma=0.822991 ! Fit after self-cal, rms=0.196451Jy sigma=0.822384 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196451Jy sigma=0.822384 ! Fit after self-cal, rms=0.196147Jy sigma=0.819588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7362 mas, bmaj=2.018 mas, bpa=-9.693 degrees ! Estimated noise=2.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.455108 Jy ! Component: 100 - total flux cleaned = 0.572908 Jy ! Component: 150 - total flux cleaned = 0.628546 Jy ! Component: 200 - total flux cleaned = 0.65831 Jy ! Total flux subtracted in 200 components = 0.65831 Jy ! Clean residual min=-0.017426 max=0.016176 Jy/beam ! Clean residual mean=0.000116 rms=0.003328 Jy/beam ! Combined flux in latest and established models = 0.658311 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.658311 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.232 mas, bpa=-6.926 degrees ! Estimated noise=1.92103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286073 Jy ! Component: 100 - total flux cleaned = 0.0448425 Jy ! Component: 150 - total flux cleaned = 0.0498042 Jy ! Component: 200 - total flux cleaned = 0.0508677 Jy ! Total flux subtracted in 200 components = 0.0508677 Jy ! Clean residual min=-0.015200 max=0.015776 Jy/beam ! Clean residual mean=0.000682 rms=0.003178 Jy/beam ! Combined flux in latest and established models = 0.709178 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.709178 Jy ! Inverting map ! Added new window around map position (-1.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931172 Jy ! Component: 100 - total flux cleaned = 0.00974137 Jy ! Component: 150 - total flux cleaned = 0.0101326 Jy ! Component: 200 - total flux cleaned = 0.0105044 Jy ! Total flux subtracted in 200 components = 0.0105044 Jy ! Clean residual min=-0.011938 max=0.011561 Jy/beam ! Clean residual mean=0.000551 rms=0.002809 Jy/beam ! Combined flux in latest and established models = 0.719683 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 47 components and 0.719683 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=3.425 mas, bpa=-1.533 degrees ! Estimated noise=2.51149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941769 Jy ! Component: 100 - total flux cleaned = 0.000967382 Jy ! Component: 150 - total flux cleaned = 0.000570782 Jy ! Component: 200 - total flux cleaned = 0.000572788 Jy ! Total flux subtracted in 200 components = 0.000572788 Jy ! Clean residual min=-0.013626 max=0.015051 Jy/beam ! Clean residual mean=0.001341 rms=0.003933 Jy/beam ! Combined flux in latest and established models = 0.720255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642613 Jy ! Component: 100 - total flux cleaned = 0.00122961 Jy ! Component: 150 - total flux cleaned = 0.00178267 Jy ! Component: 200 - total flux cleaned = 0.00230217 Jy ! Total flux subtracted in 200 components = 0.00230217 Jy ! Clean residual min=-0.012681 max=0.014461 Jy/beam ! Clean residual mean=0.001279 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 0.722558 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 73 components and 0.722558 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7905 mas, bmaj=2.232 mas, bpa=-6.926 degrees ! Estimated noise=1.92103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00263924 Jy ! Component: 100 - total flux cleaned = -0.00192372 Jy ! Component: 150 - total flux cleaned = -0.00170865 Jy ! Component: 200 - total flux cleaned = -0.00170334 Jy ! Total flux subtracted in 200 components = -0.00170334 Jy ! Clean residual min=-0.009782 max=0.010597 Jy/beam ! Clean residual mean=0.000553 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.720854 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 0.720854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196831Jy sigma=0.821141 ! Fit after self-cal, rms=0.196672Jy sigma=0.820178 wmodel /d2/scr/pima/rv101_uvs/J1354-0206_X_map.mod ! Writing 96 model components to file: /d2/scr/pima/rv101_uvs/J1354-0206_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1354-0206_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1354-0206_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1354-0206_X_map.win ! wwins: Wrote 4 windows to /d2/scr/pima/rv101_uvs/J1354-0206_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370213 Jy ! Component: 100 - total flux cleaned = 0.00509025 Jy ! Component: 150 - total flux cleaned = 0.00623323 Jy ! Component: 200 - total flux cleaned = 0.00717835 Jy ! Component: 250 - total flux cleaned = 0.0079415 Jy ! Component: 300 - total flux cleaned = 0.00868305 Jy ! Component: 350 - total flux cleaned = 0.00926347 Jy ! Component: 400 - total flux cleaned = 0.00997159 Jy ! Component: 450 - total flux cleaned = 0.0106669 Jy ! Component: 500 - total flux cleaned = 0.0116196 Jy ! Component: 550 - total flux cleaned = 0.0126903 Jy ! Component: 600 - total flux cleaned = 0.0130848 Jy ! Component: 650 - total flux cleaned = 0.0141219 Jy ! Component: 700 - total flux cleaned = 0.0146294 Jy ! Component: 750 - total flux cleaned = 0.0151318 Jy ! Component: 800 - total flux cleaned = 0.0159998 Jy ! Component: 850 - total flux cleaned = 0.0167296 Jy ! Component: 900 - total flux cleaned = 0.0173301 Jy ! Component: 950 - total flux cleaned = 0.0181555 Jy ! Component: 1000 - total flux cleaned = 0.0185033 Jy ! Component: 1050 - total flux cleaned = 0.0189618 Jy ! Component: 1100 - total flux cleaned = 0.0197524 Jy ! Component: 1150 - total flux cleaned = 0.0205349 Jy ! Component: 1200 - total flux cleaned = 0.0211949 Jy ! Component: 1250 - total flux cleaned = 0.0218483 Jy ! Component: 1300 - total flux cleaned = 0.0227078 Jy ! Component: 1350 - total flux cleaned = 0.0232386 Jy ! Component: 1400 - total flux cleaned = 0.0240781 Jy ! Component: 1450 - total flux cleaned = 0.0249058 Jy ! Component: 1500 - total flux cleaned = 0.0254184 Jy ! Component: 1550 - total flux cleaned = 0.0263294 Jy ! Component: 1600 - total flux cleaned = 0.0268299 Jy ! Component: 1650 - total flux cleaned = 0.0277222 Jy ! Component: 1700 - total flux cleaned = 0.0282123 Jy ! Component: 1750 - total flux cleaned = 0.0288927 Jy ! Component: 1800 - total flux cleaned = 0.0296603 Jy ! Component: 1850 - total flux cleaned = 0.0300403 Jy ! Component: 1900 - total flux cleaned = 0.0307935 Jy ! Component: 1950 - total flux cleaned = 0.0315396 Jy ! Component: 2000 - total flux cleaned = 0.0319097 Jy ! Component: 2050 - total flux cleaned = 0.0326399 Jy ! Component: 2100 - total flux cleaned = 0.0332736 Jy ! Component: 2150 - total flux cleaned = 0.0339001 Jy ! Component: 2200 - total flux cleaned = 0.0344309 Jy ! Component: 2250 - total flux cleaned = 0.035045 Jy ! Component: 2300 - total flux cleaned = 0.0353929 Jy ! Component: 2350 - total flux cleaned = 0.0359958 Jy ! Component: 2400 - total flux cleaned = 0.0362521 Jy ! Component: 2450 - total flux cleaned = 0.0369293 Jy ! Component: 2500 - total flux cleaned = 0.0373478 Jy ! Component: 2550 - total flux cleaned = 0.0377622 Jy ! Component: 2600 - total flux cleaned = 0.038091 Jy ! Component: 2650 - total flux cleaned = 0.0384172 Jy ! Component: 2700 - total flux cleaned = 0.0387402 Jy ! Component: 2750 - total flux cleaned = 0.03938 Jy ! Component: 2800 - total flux cleaned = 0.0397768 Jy ! Component: 2850 - total flux cleaned = 0.0400917 Jy ! Component: 2900 - total flux cleaned = 0.0404044 Jy ! Component: 2950 - total flux cleaned = 0.0411778 Jy ! Component: 3000 - total flux cleaned = 0.0413312 Jy ! Component: 3050 - total flux cleaned = 0.0414839 Jy ! Component: 3100 - total flux cleaned = 0.0420889 Jy ! Component: 3150 - total flux cleaned = 0.042314 Jy ! Component: 3200 - total flux cleaned = 0.0427594 Jy ! Component: 3250 - total flux cleaned = 0.0431281 Jy ! Component: 3300 - total flux cleaned = 0.0434208 Jy ! Component: 3350 - total flux cleaned = 0.043639 Jy ! Component: 3400 - total flux cleaned = 0.0439283 Jy ! Component: 3450 - total flux cleaned = 0.0442859 Jy ! Component: 3500 - total flux cleaned = 0.0447836 Jy ! Component: 3550 - total flux cleaned = 0.0452774 Jy ! Component: 3600 - total flux cleaned = 0.0454176 Jy ! Component: 3650 - total flux cleaned = 0.045766 Jy ! Component: 3700 - total flux cleaned = 0.0460424 Jy ! Component: 3750 - total flux cleaned = 0.0465906 Jy ! Component: 3800 - total flux cleaned = 0.0467951 Jy ! Component: 3850 - total flux cleaned = 0.0471333 Jy ! Component: 3900 - total flux cleaned = 0.0476709 Jy ! Component: 3950 - total flux cleaned = 0.0478709 Jy ! Component: 4000 - total flux cleaned = 0.0481358 Jy ! Component: 4050 - total flux cleaned = 0.048794 Jy ! Total flux subtracted in 4096 components = 0.0488594 Jy ! Clean residual min=-0.004403 max=0.003888 Jy/beam ! Clean residual mean=0.000114 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.769714 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 427 components and 0.769714 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1354-0206_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7905 x 2.232 at -6.926 degrees (North through East) ! Clean map min=-0.015482 max=0.60172 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1354-0206_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.601722 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00117063 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.583639 0.583639 1.16728 2.33456 4.66911 9.33823 18.6765 37.3529 74.7058 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.601 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 514.016 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1354-0206_X_uvs.log closed on Sat Nov 29 16:34:54 2014