! Started logfile: /d2/scr/pima/rv101_uvs/J1336-1529_X_uvs.log on Sat Nov 29 16:34:32 2014 obs /d2/scr/pima/rv101_uvs/J1336-1529_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_X_uva.fits ! AN table 1: 174 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.899015 visibilities/baseline/integration-bin. ! Found source: J1336-1529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 17520 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1336-1529_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006052Jy sigma=17.141272 ! Fit after self-cal, rms=0.917772Jy sigma=15.631256 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6038 mas, bmaj=1.622 mas, bpa=-3.701 degrees ! Estimated noise=0.661924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0674488 Jy ! Component: 100 - total flux cleaned = 0.082426 Jy ! Total flux subtracted in 100 components = 0.082426 Jy ! Clean residual min=-0.005914 max=0.006086 Jy/beam ! Clean residual mean=0.000003 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.082426 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.082426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114377Jy sigma=1.831339 ! Fit after self-cal, rms=0.113444Jy sigma=1.815759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7727 mas, bmaj=1.984 mas, bpa=-4.452 degrees ! Estimated noise=0.321894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731281 Jy ! Component: 100 - total flux cleaned = 0.010266 Jy ! Component: 150 - total flux cleaned = 0.0117187 Jy ! Component: 200 - total flux cleaned = 0.0124631 Jy ! Total flux subtracted in 200 components = 0.0124631 Jy ! Clean residual min=-0.002716 max=0.003373 Jy/beam ! Clean residual mean=-0.000001 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0948891 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0948891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112990Jy sigma=1.808755 ! Fit after self-cal, rms=0.112992Jy sigma=1.808074 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7727 x 1.984 at -4.452 degrees (North through East) ! Clean map min=-0.0024215 max=0.089367 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.95 LA 1.02 MK 1.04 ! NL 0.97 OV 1.01 PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.99 LA 1.00 MK 1.01 ! NL 1.01 OV 1.07 PT 0.91 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.91 LA 1.04 MK 0.99 ! NL 0.99 OV 1.05 PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.90 LA 0.99 MK 0.99 ! NL 1.00 OV 1.03 PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.112992Jy sigma=1.808074 ! Fit after self-cal, rms=0.110748Jy sigma=1.805689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.774 mas, bmaj=1.99 mas, bpa=-4.595 degrees ! Estimated noise=0.320593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360096 Jy ! Component: 100 - total flux cleaned = 0.000380097 Jy ! Component: 150 - total flux cleaned = 0.000379457 Jy ! Component: 200 - total flux cleaned = 0.000379219 Jy ! Total flux subtracted in 200 components = 0.000379219 Jy ! Clean residual min=-0.002481 max=0.002925 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0952683 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0952683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110741Jy sigma=1.805580 ! Fit after self-cal, rms=0.110687Jy sigma=1.805001 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110687Jy sigma=1.805001 ! Fit after self-cal, rms=0.110252Jy sigma=1.803727 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.774 mas, bmaj=1.986 mas, bpa=-4.686 degrees ! Estimated noise=0.319957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71542e-05 Jy ! Component: 100 - total flux cleaned = 9.53235e-05 Jy ! Component: 150 - total flux cleaned = 7.89449e-05 Jy ! Component: 200 - total flux cleaned = 6.70677e-05 Jy ! Total flux subtracted in 200 components = 6.70677e-05 Jy ! Clean residual min=-0.002365 max=0.002842 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0953354 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0953354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110245Jy sigma=1.803646 ! Fit after self-cal, rms=0.110241Jy sigma=1.803371 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257669 Jy ! Component: 100 - total flux cleaned = 0.00270783 Jy ! Component: 150 - total flux cleaned = 0.00250344 Jy ! Component: 200 - total flux cleaned = 0.00233387 Jy ! Total flux subtracted in 200 components = 0.00233387 Jy ! Clean residual min=-0.002193 max=0.002566 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0976693 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0976693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110178Jy sigma=1.802399 ! Fit after self-cal, rms=0.110160Jy sigma=1.802092 ! Inverting map ! Added new window around map position (-12.4, -34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216918 Jy ! Component: 100 - total flux cleaned = 0.00287367 Jy ! Component: 150 - total flux cleaned = 0.00338478 Jy ! Component: 200 - total flux cleaned = 0.00363804 Jy ! Total flux subtracted in 200 components = 0.00363804 Jy ! Clean residual min=-0.002133 max=0.001989 Jy/beam ! Clean residual mean=-0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.101307 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.101307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110101Jy sigma=1.801111 ! Fit after self-cal, rms=0.110090Jy sigma=1.800906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110090Jy sigma=1.800906 ! Fit after self-cal, rms=0.108945Jy sigma=1.800736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7696 mas, bmaj=1.974 mas, bpa=-4.607 degrees ! Estimated noise=0.317255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135778 Jy ! Component: 100 - total flux cleaned = 0.00171426 Jy ! Component: 150 - total flux cleaned = 0.00181548 Jy ! Component: 200 - total flux cleaned = 0.00178681 Jy ! Total flux subtracted in 200 components = 0.00178681 Jy ! Clean residual min=-0.001987 max=0.001896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.103094 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.103094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108917Jy sigma=1.800309 ! Fit after self-cal, rms=0.108889Jy sigma=1.799839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681234 Jy ! Component: 100 - total flux cleaned = 0.000623273 Jy ! Component: 150 - total flux cleaned = 0.000518351 Jy ! Component: 200 - total flux cleaned = 0.000421582 Jy ! Total flux subtracted in 200 components = 0.000421582 Jy ! Clean residual min=-0.002045 max=0.001868 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.103516 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.103516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108875Jy sigma=1.799615 ! Fit after self-cal, rms=0.108872Jy sigma=1.799589 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108872Jy sigma=1.799589 ! Fit after self-cal, rms=0.108465Jy sigma=1.799545 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.993 mas, bmaj=4.517 mas, bpa=-2.396 degrees ! Estimated noise=0.427668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945792 Jy ! Component: 100 - total flux cleaned = 0.0013348 Jy ! Component: 150 - total flux cleaned = 0.00133446 Jy ! Component: 200 - total flux cleaned = 0.00132222 Jy ! Total flux subtracted in 200 components = 0.00132222 Jy ! Clean residual min=-0.002173 max=0.002264 Jy/beam ! Clean residual mean=-0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.104838 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.104838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108463Jy sigma=1.799490 ! Fit after self-cal, rms=0.108452Jy sigma=1.799446 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533183 Jy ! Component: 100 - total flux cleaned = 0.000534736 Jy ! Component: 150 - total flux cleaned = 0.000547808 Jy ! Component: 200 - total flux cleaned = 0.000536896 Jy ! Total flux subtracted in 200 components = 0.000536896 Jy ! Clean residual min=-0.002091 max=0.002295 Jy/beam ! Clean residual mean=-0.000005 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.105375 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.105375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108450Jy sigma=1.799416 ! Fit after self-cal, rms=0.108447Jy sigma=1.799406 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7678 mas, bmaj=1.967 mas, bpa=-4.563 degrees ! Estimated noise=0.316341 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7678 x 1.967 at -4.563 degrees (North through East) ! Clean map min=-0.0017721 max=0.088347 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6011 mas, bmaj=1.612 mas, bpa=-3.9 degrees ! Estimated noise=0.644019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659325 Jy ! Component: 100 - total flux cleaned = 0.0815748 Jy ! Component: 150 - total flux cleaned = 0.0889002 Jy ! Component: 200 - total flux cleaned = 0.0938548 Jy ! Total flux subtracted in 200 components = 0.0938548 Jy ! Clean residual min=-0.005042 max=0.005135 Jy/beam ! Clean residual mean=0.000002 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.0938549 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0938549 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7678 mas, bmaj=1.967 mas, bpa=-4.563 degrees ! Estimated noise=0.316341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478921 Jy ! Component: 100 - total flux cleaned = 0.00758271 Jy ! Component: 150 - total flux cleaned = 0.00896977 Jy ! Component: 200 - total flux cleaned = 0.00962071 Jy ! Total flux subtracted in 200 components = 0.00962071 Jy ! Clean residual min=-0.002112 max=0.001990 Jy/beam ! Clean residual mean=-0.000001 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.103476 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.103476 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.993 mas, bmaj=4.517 mas, bpa=-2.396 degrees ! Estimated noise=0.427668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013739 Jy ! Component: 100 - total flux cleaned = 0.00170965 Jy ! Component: 150 - total flux cleaned = 0.00193148 Jy ! Component: 200 - total flux cleaned = 0.00212527 Jy ! Total flux subtracted in 200 components = 0.00212527 Jy ! Clean residual min=-0.002190 max=0.002412 Jy/beam ! Clean residual mean=-0.000005 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.105601 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194348 Jy ! Component: 100 - total flux cleaned = 0.000305819 Jy ! Component: 150 - total flux cleaned = 0.000369163 Jy ! Component: 200 - total flux cleaned = 0.000409369 Jy ! Total flux subtracted in 200 components = 0.000409369 Jy ! Clean residual min=-0.002160 max=0.002403 Jy/beam ! Clean residual mean=-0.000004 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.10601 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.10601 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7678 mas, bmaj=1.967 mas, bpa=-4.563 degrees ! Estimated noise=0.316341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.59772e-05 Jy ! Component: 100 - total flux cleaned = -0.00014584 Jy ! Component: 150 - total flux cleaned = -0.00030369 Jy ! Component: 200 - total flux cleaned = -0.000478595 Jy ! Total flux subtracted in 200 components = -0.000478595 Jy ! Clean residual min=-0.002016 max=0.001928 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.105532 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.105532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108460Jy sigma=1.799702 ! Fit after self-cal, rms=0.108463Jy sigma=1.799581 wmodel /d2/scr/pima/rv101_uvs/J1336-1529_X_map.mod ! Writing 64 model components to file: /d2/scr/pima/rv101_uvs/J1336-1529_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1336-1529_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1336-1529_X_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J1336-1529_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231231 Jy ! Component: 100 - total flux cleaned = -0.000164582 Jy ! Component: 150 - total flux cleaned = -3.59302e-05 Jy ! Component: 200 - total flux cleaned = -4.24257e-06 Jy ! Component: 250 - total flux cleaned = -3.38032e-05 Jy ! Component: 300 - total flux cleaned = -0.000120992 Jy ! Component: 350 - total flux cleaned = -0.000149156 Jy ! Component: 400 - total flux cleaned = -0.000177964 Jy ! Component: 450 - total flux cleaned = -0.0003135 Jy ! Component: 500 - total flux cleaned = -0.000392552 Jy ! Component: 550 - total flux cleaned = -0.000574287 Jy ! Component: 600 - total flux cleaned = -0.000676056 Jy ! Component: 650 - total flux cleaned = -0.000776125 Jy ! Component: 700 - total flux cleaned = -0.000972052 Jy ! Component: 750 - total flux cleaned = -0.00111576 Jy ! Component: 800 - total flux cleaned = -0.00123369 Jy ! Component: 850 - total flux cleaned = -0.00137301 Jy ! Component: 900 - total flux cleaned = -0.00157872 Jy ! Component: 950 - total flux cleaned = -0.00173588 Jy ! Component: 1000 - total flux cleaned = -0.00193516 Jy ! Component: 1050 - total flux cleaned = -0.00206665 Jy ! Component: 1100 - total flux cleaned = -0.00234689 Jy ! Component: 1150 - total flux cleaned = -0.00245272 Jy ! Component: 1200 - total flux cleaned = -0.00257847 Jy ! Component: 1250 - total flux cleaned = -0.00280673 Jy ! Component: 1300 - total flux cleaned = -0.00282732 Jy ! Component: 1350 - total flux cleaned = -0.00300972 Jy ! Component: 1400 - total flux cleaned = -0.00322974 Jy ! Component: 1450 - total flux cleaned = -0.00336768 Jy ! Component: 1500 - total flux cleaned = -0.00346518 Jy ! Component: 1550 - total flux cleaned = -0.00356181 Jy ! Component: 1600 - total flux cleaned = -0.00371426 Jy ! Component: 1650 - total flux cleaned = -0.00378927 Jy ! Component: 1700 - total flux cleaned = -0.00386384 Jy ! Component: 1750 - total flux cleaned = -0.00401138 Jy ! Component: 1800 - total flux cleaned = -0.00412121 Jy ! Component: 1850 - total flux cleaned = -0.00419345 Jy ! Component: 1900 - total flux cleaned = -0.00422924 Jy ! Component: 1950 - total flux cleaned = -0.00430026 Jy ! Component: 2000 - total flux cleaned = -0.00442336 Jy ! Component: 2050 - total flux cleaned = -0.00449302 Jy ! Component: 2100 - total flux cleaned = -0.00466553 Jy ! Component: 2150 - total flux cleaned = -0.0046995 Jy ! Component: 2200 - total flux cleaned = -0.00481804 Jy ! Component: 2250 - total flux cleaned = -0.00490202 Jy ! Component: 2300 - total flux cleaned = -0.0049686 Jy ! Component: 2350 - total flux cleaned = -0.00506769 Jy ! Component: 2400 - total flux cleaned = -0.00508413 Jy ! Component: 2450 - total flux cleaned = -0.0052142 Jy ! Component: 2500 - total flux cleaned = -0.00523034 Jy ! Component: 2550 - total flux cleaned = -0.00532628 Jy ! Component: 2600 - total flux cleaned = -0.00540548 Jy ! Component: 2650 - total flux cleaned = -0.005484 Jy ! Component: 2700 - total flux cleaned = -0.0055153 Jy ! Component: 2750 - total flux cleaned = -0.0056705 Jy ! Component: 2800 - total flux cleaned = -0.00576263 Jy ! Component: 2850 - total flux cleaned = -0.00576248 Jy ! Component: 2900 - total flux cleaned = -0.00588396 Jy ! Component: 2950 - total flux cleaned = -0.00591394 Jy ! Component: 3000 - total flux cleaned = -0.00597381 Jy ! Component: 3050 - total flux cleaned = -0.00612249 Jy ! Component: 3100 - total flux cleaned = -0.00616674 Jy ! Component: 3150 - total flux cleaned = -0.00624019 Jy ! Component: 3200 - total flux cleaned = -0.00631297 Jy ! Component: 3250 - total flux cleaned = -0.0064432 Jy ! Component: 3300 - total flux cleaned = -0.00657241 Jy ! Component: 3350 - total flux cleaned = -0.00661517 Jy ! Component: 3400 - total flux cleaned = -0.00671465 Jy ! Component: 3450 - total flux cleaned = -0.00684156 Jy ! Component: 3500 - total flux cleaned = -0.00688357 Jy ! Component: 3550 - total flux cleaned = -0.00699503 Jy ! Component: 3600 - total flux cleaned = -0.00711974 Jy ! Component: 3650 - total flux cleaned = -0.00720229 Jy ! Component: 3700 - total flux cleaned = -0.00729817 Jy ! Component: 3750 - total flux cleaned = -0.00731187 Jy ! Component: 3800 - total flux cleaned = -0.00743377 Jy ! Component: 3850 - total flux cleaned = -0.0075414 Jy ! Component: 3900 - total flux cleaned = -0.00755481 Jy ! Component: 3950 - total flux cleaned = -0.00762136 Jy ! Component: 4000 - total flux cleaned = -0.00772742 Jy ! Component: 4050 - total flux cleaned = -0.00776695 Jy ! Total flux subtracted in 4096 components = -0.00787196 Jy ! Clean residual min=-0.000853 max=0.000812 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0976596 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 354 components and 0.0976597 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1336-1529_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7678 x 1.967 at -4.563 degrees (North through East) ! Clean map min=-0.0014618 max=0.086836 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0868364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214726 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.741828 0.741828 1.48366 2.96731 5.93463 11.8693 23.7385 47.477 94.954 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.086 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 404.406 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1336-1529_X_uvs.log closed on Sat Nov 29 16:34:38 2014