! Started logfile: /d2/scr/pima/rv101_uvs/J1336-1529_S_uvs.log on Sat Nov 29 13:53:54 2014 obs /d2/scr/pima/rv101_uvs/J1336-1529_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_S_uva.fits ! AN table 1: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.873377 visibilities/baseline/integration-bin. ! Found source: J1336-1529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4304 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1336-1529_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002528Jy sigma=14.104406 ! Fit after self-cal, rms=0.925259Jy sigma=12.977110 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=7.015 mas, bpa=-1.137 degrees ! Estimated noise=1.54352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582253 Jy ! Component: 100 - total flux cleaned = 0.0728458 Jy ! Total flux subtracted in 100 components = 0.0728458 Jy ! Clean residual min=-0.007242 max=0.007221 Jy/beam ! Clean residual mean=0.000003 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.0728458 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0728458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072830Jy sigma=0.911685 ! Fit after self-cal, rms=0.072376Jy sigma=0.902979 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=8.766 mas, bpa=-2.049 degrees ! Estimated noise=0.803205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946752 Jy ! Component: 100 - total flux cleaned = 0.0137084 Jy ! Component: 150 - total flux cleaned = 0.0157173 Jy ! Component: 200 - total flux cleaned = 0.0166925 Jy ! Total flux subtracted in 200 components = 0.0166925 Jy ! Clean residual min=-0.002847 max=0.003180 Jy/beam ! Clean residual mean=0.000000 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0895384 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0895383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071282Jy sigma=0.886326 ! Fit after self-cal, rms=0.071266Jy sigma=0.885826 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.47 x 8.766 at -2.049 degrees (North through East) ! Clean map min=-0.0027745 max=0.077858 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.84 HN 0.95 LA 1.16 MK 0.99 ! NL 0.95 OV 1.01 PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.16 LA 1.07 MK 1.04 ! NL 1.00 OV 1.03 PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.01 LA 0.92 MK 0.99 ! NL 1.11 OV 1.06 PT 1.04 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.071266Jy sigma=0.885826 ! Fit after self-cal, rms=0.072304Jy sigma=0.880539 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.749 mas, bpa=-1.955 degrees ! Estimated noise=0.819837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186881 Jy ! Component: 100 - total flux cleaned = 0.00241873 Jy ! Component: 150 - total flux cleaned = 0.00242007 Jy ! Component: 200 - total flux cleaned = 0.00244527 Jy ! Total flux subtracted in 200 components = 0.00244527 Jy ! Clean residual min=-0.002807 max=0.003042 Jy/beam ! Clean residual mean=0.000001 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0919836 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0919836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072242Jy sigma=0.879998 ! Fit after self-cal, rms=0.072270Jy sigma=0.879723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072270Jy sigma=0.879723 ! Fit after self-cal, rms=0.073819Jy sigma=0.878635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.761 mas, bpa=-2.085 degrees ! Estimated noise=0.833154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998881 Jy ! Component: 100 - total flux cleaned = 0.00100183 Jy ! Component: 150 - total flux cleaned = 0.00102538 Jy ! Component: 200 - total flux cleaned = 0.00100307 Jy ! Total flux subtracted in 200 components = 0.00100307 Jy ! Clean residual min=-0.002907 max=0.002940 Jy/beam ! Clean residual mean=0.000002 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0929867 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0929867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073785Jy sigma=0.878379 ! Fit after self-cal, rms=0.073799Jy sigma=0.878330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04596e-05 Jy ! Component: 100 - total flux cleaned = 7.14778e-07 Jy ! Component: 150 - total flux cleaned = -3.65644e-05 Jy ! Component: 200 - total flux cleaned = -7.06293e-05 Jy ! Total flux subtracted in 200 components = -7.06293e-05 Jy ! Clean residual min=-0.002902 max=0.002934 Jy/beam ! Clean residual mean=0.000002 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.092916 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.092916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073788Jy sigma=0.878238 ! Fit after self-cal, rms=0.073784Jy sigma=0.878234 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073784Jy sigma=0.878234 ! Fit after self-cal, rms=0.074409Jy sigma=0.877569 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=8.745 mas, bpa=-2.069 degrees ! Estimated noise=0.842708 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109242 Jy ! Component: 100 - total flux cleaned = 0.00130601 Jy ! Component: 150 - total flux cleaned = 0.00135243 Jy ! Component: 200 - total flux cleaned = 0.00135281 Jy ! Total flux subtracted in 200 components = 0.00135281 Jy ! Clean residual min=-0.002834 max=0.002860 Jy/beam ! Clean residual mean=0.000003 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0942689 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0942689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074386Jy sigma=0.877406 ! Fit after self-cal, rms=0.074386Jy sigma=0.877387 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73027e-05 Jy ! Component: 100 - total flux cleaned = 1.74868e-05 Jy ! Component: 150 - total flux cleaned = 5.18391e-06 Jy ! Component: 200 - total flux cleaned = 4.9907e-06 Jy ! Total flux subtracted in 200 components = 4.9907e-06 Jy ! Clean residual min=-0.002843 max=0.002847 Jy/beam ! Clean residual mean=0.000003 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0942739 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0942739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074379Jy sigma=0.877346 ! Fit after self-cal, rms=0.074377Jy sigma=0.877341 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074377Jy sigma=0.877341 ! Fit after self-cal, rms=0.073933Jy sigma=0.875593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.249 mas, bmaj=16.95 mas, bpa=-1.415 degrees ! Estimated noise=0.978978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.43601e-05 Jy ! Component: 100 - total flux cleaned = 0.000112672 Jy ! Component: 150 - total flux cleaned = 0.000128925 Jy ! Component: 200 - total flux cleaned = 0.000143396 Jy ! Total flux subtracted in 200 components = 0.000143396 Jy ! Clean residual min=-0.002498 max=0.003297 Jy/beam ! Clean residual mean=0.000004 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0944172 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0944173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073934Jy sigma=0.875598 ! Fit after self-cal, rms=0.073953Jy sigma=0.875479 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.5446e-06 Jy ! Component: 100 - total flux cleaned = 5.17698e-06 Jy ! Component: 150 - total flux cleaned = 1.1989e-05 Jy ! Component: 200 - total flux cleaned = 2.49292e-05 Jy ! Total flux subtracted in 200 components = 2.49292e-05 Jy ! Clean residual min=-0.002457 max=0.003261 Jy/beam ! Clean residual mean=0.000004 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0944422 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0944422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073953Jy sigma=0.875479 ! Fit after self-cal, rms=0.073953Jy sigma=0.875472 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.705 mas, bpa=-1.752 degrees ! Estimated noise=0.841434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 8.705 at -1.752 degrees (North through East) ! Clean map min=-0.0025624 max=0.082435 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=6.954 mas, bpa=-0.6711 degrees ! Estimated noise=1.61257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607943 Jy ! Component: 100 - total flux cleaned = 0.0767136 Jy ! Component: 150 - total flux cleaned = 0.0850646 Jy ! Component: 200 - total flux cleaned = 0.090077 Jy ! Total flux subtracted in 200 components = 0.090077 Jy ! Clean residual min=-0.006309 max=0.006565 Jy/beam ! Clean residual mean=0.000003 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.090077 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.090077 Jy ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.705 mas, bpa=-1.752 degrees ! Estimated noise=0.841434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314116 Jy ! Component: 100 - total flux cleaned = 0.00410857 Jy ! Component: 150 - total flux cleaned = 0.00418907 Jy ! Component: 200 - total flux cleaned = 0.00425402 Jy ! Total flux subtracted in 200 components = 0.00425402 Jy ! Clean residual min=-0.002685 max=0.002876 Jy/beam ! Clean residual mean=0.000004 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.094331 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.094331 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.249 mas, bmaj=16.95 mas, bpa=-1.415 degrees ! Estimated noise=0.978978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461892 Jy ! Component: 100 - total flux cleaned = 0.000503308 Jy ! Component: 150 - total flux cleaned = 0.000526878 Jy ! Component: 200 - total flux cleaned = 0.000547608 Jy ! Total flux subtracted in 200 components = 0.000547608 Jy ! Clean residual min=-0.002498 max=0.003300 Jy/beam ! Clean residual mean=0.000004 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0948786 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.32781e-06 Jy ! Component: 100 - total flux cleaned = 1.7723e-05 Jy ! Component: 150 - total flux cleaned = 1.7786e-05 Jy ! Component: 200 - total flux cleaned = 2.5351e-05 Jy ! Total flux subtracted in 200 components = 2.5351e-05 Jy ! Clean residual min=-0.002477 max=0.003288 Jy/beam ! Clean residual mean=0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0949039 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.0949039 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.705 mas, bpa=-1.752 degrees ! Estimated noise=0.841434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234622 Jy ! Component: 100 - total flux cleaned = -0.00028667 Jy ! Component: 150 - total flux cleaned = -0.000334299 Jy ! Component: 200 - total flux cleaned = -0.000379543 Jy ! Total flux subtracted in 200 components = -0.000379543 Jy ! Clean residual min=-0.002735 max=0.002838 Jy/beam ! Clean residual mean=0.000004 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0945244 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0945244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073970Jy sigma=0.875657 ! Fit after self-cal, rms=0.073972Jy sigma=0.875623 wmodel /d2/scr/pima/rv101_uvs/J1336-1529_S_map.mod ! Writing 34 model components to file: /d2/scr/pima/rv101_uvs/J1336-1529_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1336-1529_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1336-1529_S_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J1336-1529_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785124 Jy ! Component: 100 - total flux cleaned = 0.00117031 Jy ! Component: 150 - total flux cleaned = 0.0013506 Jy ! Component: 200 - total flux cleaned = 0.0012655 Jy ! Component: 250 - total flux cleaned = 0.000978814 Jy ! Component: 300 - total flux cleaned = 0.000700736 Jy ! Component: 350 - total flux cleaned = 0.000471293 Jy ! Component: 400 - total flux cleaned = 0.000322564 Jy ! Component: 450 - total flux cleaned = 0.000213745 Jy ! Component: 500 - total flux cleaned = 0.000212787 Jy ! Component: 550 - total flux cleaned = 0.000245512 Jy ! Component: 600 - total flux cleaned = 0.000245272 Jy ! Component: 650 - total flux cleaned = 0.000310881 Jy ! Component: 700 - total flux cleaned = 0.000279302 Jy ! Component: 750 - total flux cleaned = 0.000373796 Jy ! Component: 800 - total flux cleaned = 0.00046574 Jy ! Component: 850 - total flux cleaned = 0.000615757 Jy ! Component: 900 - total flux cleaned = 0.000792576 Jy ! Component: 950 - total flux cleaned = 0.000966126 Jy ! Component: 1000 - total flux cleaned = 0.00102348 Jy ! Component: 1050 - total flux cleaned = 0.00116355 Jy ! Component: 1100 - total flux cleaned = 0.0013009 Jy ! Component: 1150 - total flux cleaned = 0.00143593 Jy ! Component: 1200 - total flux cleaned = 0.00151518 Jy ! Component: 1250 - total flux cleaned = 0.00156801 Jy ! Component: 1300 - total flux cleaned = 0.0016965 Jy ! Component: 1350 - total flux cleaned = 0.00179791 Jy ! Component: 1400 - total flux cleaned = 0.00187261 Jy ! Component: 1450 - total flux cleaned = 0.00194647 Jy ! Component: 1500 - total flux cleaned = 0.00206786 Jy ! Component: 1550 - total flux cleaned = 0.00211608 Jy ! Component: 1600 - total flux cleaned = 0.00221074 Jy ! Component: 1650 - total flux cleaned = 0.00225747 Jy ! Component: 1700 - total flux cleaned = 0.00234952 Jy ! Component: 1750 - total flux cleaned = 0.00234952 Jy ! Component: 1800 - total flux cleaned = 0.00243923 Jy ! Component: 1850 - total flux cleaned = 0.00246172 Jy ! Component: 1900 - total flux cleaned = 0.00252732 Jy ! Component: 1950 - total flux cleaned = 0.00257089 Jy ! Component: 2000 - total flux cleaned = 0.00272014 Jy ! Component: 2050 - total flux cleaned = 0.00274127 Jy ! Component: 2100 - total flux cleaned = 0.00286624 Jy ! Component: 2150 - total flux cleaned = 0.00298986 Jy ! Component: 2200 - total flux cleaned = 0.00311222 Jy ! Component: 2250 - total flux cleaned = 0.00323326 Jy ! Component: 2300 - total flux cleaned = 0.00337318 Jy ! Component: 2350 - total flux cleaned = 0.00343271 Jy ! Component: 2400 - total flux cleaned = 0.00355031 Jy ! Component: 2450 - total flux cleaned = 0.00364761 Jy ! Component: 2500 - total flux cleaned = 0.00374401 Jy ! Component: 2550 - total flux cleaned = 0.0038779 Jy ! Component: 2600 - total flux cleaned = 0.00395367 Jy ! Component: 2650 - total flux cleaned = 0.0040288 Jy ! Component: 2700 - total flux cleaned = 0.00421469 Jy ! Component: 2750 - total flux cleaned = 0.00428837 Jy ! Component: 2800 - total flux cleaned = 0.00439784 Jy ! Component: 2850 - total flux cleaned = 0.00452473 Jy ! Component: 2900 - total flux cleaned = 0.00456063 Jy ! Component: 2950 - total flux cleaned = 0.00459633 Jy ! Component: 3000 - total flux cleaned = 0.00464932 Jy ! Component: 3050 - total flux cleaned = 0.00468442 Jy ! Component: 3100 - total flux cleaned = 0.00471943 Jy ! Component: 3150 - total flux cleaned = 0.00480585 Jy ! Component: 3200 - total flux cleaned = 0.00487449 Jy ! Component: 3250 - total flux cleaned = 0.00489156 Jy ! Component: 3300 - total flux cleaned = 0.00497606 Jy ! Component: 3350 - total flux cleaned = 0.00497618 Jy ! Component: 3400 - total flux cleaned = 0.00504286 Jy ! Component: 3450 - total flux cleaned = 0.00509263 Jy ! Component: 3500 - total flux cleaned = 0.00509263 Jy ! Component: 3550 - total flux cleaned = 0.00510902 Jy ! Component: 3600 - total flux cleaned = 0.00514151 Jy ! Component: 3650 - total flux cleaned = 0.0051577 Jy ! Component: 3700 - total flux cleaned = 0.00520558 Jy ! Component: 3750 - total flux cleaned = 0.00520561 Jy ! Component: 3800 - total flux cleaned = 0.0052369 Jy ! Component: 3850 - total flux cleaned = 0.00523683 Jy ! Component: 3900 - total flux cleaned = 0.00522128 Jy ! Component: 3950 - total flux cleaned = 0.00523677 Jy ! Component: 4000 - total flux cleaned = 0.00523675 Jy ! Component: 4050 - total flux cleaned = 0.00522157 Jy ! Total flux subtracted in 4096 components = 0.00526729 Jy ! Clean residual min=-0.001042 max=0.000823 Jy/beam ! Clean residual mean=0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0997917 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 299 components and 0.0997917 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1336-1529_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 8.705 at -1.752 degrees (North through East) ! Clean map min=-0.0016736 max=0.081867 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1336-1529_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0818675 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260879 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.95598 0.95598 1.91196 3.82392 7.64784 15.2957 30.5914 61.1827 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.081 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 313.814 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1336-1529_S_uvs.log closed on Sat Nov 29 13:53:58 2014