! Started logfile: /d2/scr/pima/rv101_uvs/J1254-2000_S_uvs.log on Sat Nov 29 13:53:41 2014
obs /d2/scr/pima/rv101_uvs/J1254-2000_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1254-2000_S_uva.fits
! AN table 1: 44 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.833604 visibilities/baseline/integration-bin.
! Found source: J1254-2000
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4108 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1254-2000_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002762Jy  sigma=13.939941
! Fit after  self-cal, rms=0.928058Jy  sigma=12.908336
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.937 mas, bmaj=6.95 mas, bpa=0.3026 degrees
! Estimated noise=1.51588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.057043 Jy
! Component: 100  -  total flux cleaned = 0.0705781 Jy
! Total flux subtracted in 100 components = 0.0705781 Jy
! Clean residual min=-0.006200 max=0.006532 Jy/beam
! Clean residual mean=-0.000001 rms=0.001479 Jy/beam
! Combined flux in latest and established models = 0.0705781 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0705781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078875Jy  sigma=0.927186
! Fit after  self-cal, rms=0.078227Jy  sigma=0.917909
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.539 mas, bmaj=8.551 mas, bpa=1.323 degrees
! Estimated noise=0.820588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731366 Jy
! Component: 100  -  total flux cleaned = 0.0104917 Jy
! Component: 150  -  total flux cleaned = 0.0108078 Jy
! Component: 200  -  total flux cleaned = 0.0109479 Jy
! Total flux subtracted in 200 components = 0.0109479 Jy
! Clean residual min=-0.003430 max=0.003326 Jy/beam
! Clean residual mean=-0.000008 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.0815261 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.0815261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077409Jy  sigma=0.909049
! Fit after  self-cal, rms=0.077386Jy  sigma=0.908554
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.539 x 8.551 at 1.323 degrees (North through East)
! Clean map  min=-0.0035162  max=0.074233 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.03     LA        1.02     MK        1.05     
!   NL        0.98     OV        0.96     PT        1.04     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.17     LA        0.94     MK        1.03     
!   NL        1.07     OV        1.04     PT        1.09     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        0.89     LA        0.88     MK        0.91     
!   NL        1.08     OV        0.87     PT        0.90     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.077386Jy  sigma=0.908554
! Fit after  self-cal, rms=0.076586Jy  sigma=0.902558
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.532 mas, bmaj=8.55 mas, bpa=1.381 degrees
! Estimated noise=0.820869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608517 Jy
! Component: 100  -  total flux cleaned = 0.000737256 Jy
! Component: 150  -  total flux cleaned = 0.000851632 Jy
! Component: 200  -  total flux cleaned = 0.000904368 Jy
! Total flux subtracted in 200 components = 0.000904368 Jy
! Clean residual min=-0.003158 max=0.002817 Jy/beam
! Clean residual mean=-0.000006 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.0824304 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 19 components and 0.0824304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076432Jy  sigma=0.901483
! Fit after  self-cal, rms=0.076435Jy  sigma=0.901186
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076435Jy  sigma=0.901186
! Fit after  self-cal, rms=0.075515Jy  sigma=0.899472
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=8.512 mas, bpa=1.403 degrees
! Estimated noise=0.824362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00062985 Jy
! Component: 100  -  total flux cleaned = 0.000719797 Jy
! Component: 150  -  total flux cleaned = 0.000800812 Jy
! Component: 200  -  total flux cleaned = 0.00083748 Jy
! Total flux subtracted in 200 components = 0.00083748 Jy
! Clean residual min=-0.003018 max=0.003113 Jy/beam
! Clean residual mean=-0.000006 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.0832679 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.0832679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075439Jy  sigma=0.899011
! Fit after  self-cal, rms=0.075485Jy  sigma=0.898724
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-64, -71).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147698 Jy
! Component: 100  -  total flux cleaned = 0.00185407 Jy
! Component: 150  -  total flux cleaned = 0.0020772 Jy
! Component: 200  -  total flux cleaned = 0.00215624 Jy
! Total flux subtracted in 200 components = 0.00215624 Jy
! Clean residual min=-0.002878 max=0.002535 Jy/beam
! Clean residual mean=-0.000006 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0854242 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.0854242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075352Jy  sigma=0.897260
! Fit after  self-cal, rms=0.075308Jy  sigma=0.897026
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075308Jy  sigma=0.897026
! Fit after  self-cal, rms=0.075932Jy  sigma=0.896826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.517 mas, bmaj=8.515 mas, bpa=1.329 degrees
! Estimated noise=0.828553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104123 Jy
! Component: 100  -  total flux cleaned = 0.00125278 Jy
! Component: 150  -  total flux cleaned = 0.0012899 Jy
! Component: 200  -  total flux cleaned = 0.00135866 Jy
! Total flux subtracted in 200 components = 0.00135866 Jy
! Clean residual min=-0.002783 max=0.002561 Jy/beam
! Clean residual mean=-0.000005 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.0867828 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.0867828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075867Jy  sigma=0.896301
! Fit after  self-cal, rms=0.075861Jy  sigma=0.896248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131793 Jy
! Component: 100  -  total flux cleaned = 0.000197618 Jy
! Component: 150  -  total flux cleaned = 0.000257717 Jy
! Component: 200  -  total flux cleaned = 0.000287011 Jy
! Total flux subtracted in 200 components = 0.000287011 Jy
! Clean residual min=-0.002741 max=0.002587 Jy/beam
! Clean residual mean=-0.000005 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.0870698 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.0870698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075824Jy  sigma=0.896010
! Fit after  self-cal, rms=0.075811Jy  sigma=0.895995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075811Jy  sigma=0.895995
! Fit after  self-cal, rms=0.076258Jy  sigma=0.895902
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=16.88 mas, bpa=-0.2666 degrees
! Estimated noise=0.997452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000283101 Jy
! Component: 100  -  total flux cleaned = 0.000340816 Jy
! Component: 150  -  total flux cleaned = 0.000366054 Jy
! Component: 200  -  total flux cleaned = 0.000412283 Jy
! Total flux subtracted in 200 components = 0.000412283 Jy
! Clean residual min=-0.002441 max=0.002789 Jy/beam
! Clean residual mean=-0.000004 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.0874821 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.0874821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076247Jy  sigma=0.895878
! Fit after  self-cal, rms=0.076255Jy  sigma=0.895841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.82809e-05 Jy
! Component: 100  -  total flux cleaned = 2.64129e-05 Jy
! Component: 150  -  total flux cleaned = -1.01433e-05 Jy
! Component: 200  -  total flux cleaned = -2.71022e-05 Jy
! Total flux subtracted in 200 components = -2.71022e-05 Jy
! Clean residual min=-0.002432 max=0.002845 Jy/beam
! Clean residual mean=-0.000004 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.087455 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.087455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076252Jy  sigma=0.895858
! Fit after  self-cal, rms=0.076248Jy  sigma=0.895841
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.511 mas, bmaj=8.519 mas, bpa=1.228 degrees
! Estimated noise=0.831713 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.511 x 8.519 at 1.228 degrees (North through East)
! Clean map  min=-0.0026431  max=0.075909 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.917 mas, bmaj=6.948 mas, bpa=0.3521 degrees
! Estimated noise=1.5277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0577723 Jy
! Component: 100  -  total flux cleaned = 0.0724184 Jy
! Component: 150  -  total flux cleaned = 0.0771871 Jy
! Component: 200  -  total flux cleaned = 0.0796308 Jy
! Total flux subtracted in 200 components = 0.0796308 Jy
! Clean residual min=-0.005466 max=0.004864 Jy/beam
! Clean residual mean=-0.000003 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.0796308 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0796308 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.511 mas, bmaj=8.519 mas, bpa=1.228 degrees
! Estimated noise=0.831713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446762 Jy
! Component: 100  -  total flux cleaned = 0.00618981 Jy
! Component: 150  -  total flux cleaned = 0.00682104 Jy
! Component: 200  -  total flux cleaned = 0.00712834 Jy
! Total flux subtracted in 200 components = 0.00712834 Jy
! Clean residual min=-0.002887 max=0.002588 Jy/beam
! Clean residual mean=-0.000005 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.0867592 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.0867592 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=16.88 mas, bpa=-0.2666 degrees
! Estimated noise=0.997452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000677156 Jy
! Component: 100  -  total flux cleaned = 0.000605073 Jy
! Component: 150  -  total flux cleaned = 0.000605229 Jy
! Component: 200  -  total flux cleaned = 0.000575082 Jy
! Total flux subtracted in 200 components = 0.000575082 Jy
! Clean residual min=-0.002490 max=0.002874 Jy/beam
! Clean residual mean=-0.000006 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.0873342 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.12757e-05 Jy
! Component: 100  -  total flux cleaned = -9.88402e-05 Jy
! Component: 150  -  total flux cleaned = -0.000120856 Jy
! Component: 200  -  total flux cleaned = -0.000182667 Jy
! Total flux subtracted in 200 components = -0.000182667 Jy
! Clean residual min=-0.002403 max=0.002902 Jy/beam
! Clean residual mean=-0.000005 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0871516 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.0871516 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.511 mas, bmaj=8.519 mas, bpa=1.228 degrees
! Estimated noise=0.831713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105583 Jy
! Component: 100  -  total flux cleaned = -0.000109247 Jy
! Component: 150  -  total flux cleaned = -5.69158e-05 Jy
! Component: 200  -  total flux cleaned = 4.34724e-05 Jy
! Total flux subtracted in 200 components = 4.34724e-05 Jy
! Clean residual min=-0.002772 max=0.002626 Jy/beam
! Clean residual mean=-0.000004 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.087195 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.087195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076356Jy  sigma=0.896417
! Fit after  self-cal, rms=0.076367Jy  sigma=0.896366
wmodel /d2/scr/pima/rv101_uvs/J1254-2000_S_map.mod
! Writing 56 model components to file: /d2/scr/pima/rv101_uvs/J1254-2000_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J1254-2000_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1254-2000_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J1254-2000_S_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1254-2000_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000563917 Jy
! Component: 100  -  total flux cleaned = -0.000939836 Jy
! Component: 150  -  total flux cleaned = -0.00142777 Jy
! Component: 200  -  total flux cleaned = -0.00184974 Jy
! Component: 250  -  total flux cleaned = -0.00225345 Jy
! Component: 300  -  total flux cleaned = -0.00260217 Jy
! Component: 350  -  total flux cleaned = -0.00286444 Jy
! Component: 400  -  total flux cleaned = -0.00322683 Jy
! Component: 450  -  total flux cleaned = -0.00354387 Jy
! Component: 500  -  total flux cleaned = -0.0037839 Jy
! Component: 550  -  total flux cleaned = -0.00415274 Jy
! Component: 600  -  total flux cleaned = -0.00444703 Jy
! Component: 650  -  total flux cleaned = -0.00476674 Jy
! Component: 700  -  total flux cleaned = -0.004954 Jy
! Component: 750  -  total flux cleaned = -0.0051382 Jy
! Component: 800  -  total flux cleaned = -0.00531866 Jy
! Component: 850  -  total flux cleaned = -0.00528895 Jy
! Component: 900  -  total flux cleaned = -0.00549302 Jy
! Component: 950  -  total flux cleaned = -0.00552189 Jy
! Component: 1000  -  total flux cleaned = -0.00557781 Jy
! Component: 1050  -  total flux cleaned = -0.00563359 Jy
! Component: 1100  -  total flux cleaned = -0.00560693 Jy
! Component: 1150  -  total flux cleaned = -0.00563395 Jy
! Component: 1200  -  total flux cleaned = -0.00560796 Jy
! Component: 1250  -  total flux cleaned = -0.00560806 Jy
! Component: 1300  -  total flux cleaned = -0.00560829 Jy
! Component: 1350  -  total flux cleaned = -0.00560866 Jy
! Component: 1400  -  total flux cleaned = -0.00563354 Jy
! Component: 1450  -  total flux cleaned = -0.00570736 Jy
! Component: 1500  -  total flux cleaned = -0.00568333 Jy
! Component: 1550  -  total flux cleaned = -0.00580357 Jy
! Component: 1600  -  total flux cleaned = -0.00582718 Jy
! Component: 1650  -  total flux cleaned = -0.00599082 Jy
! Component: 1700  -  total flux cleaned = -0.00599086 Jy
! Component: 1750  -  total flux cleaned = -0.00608241 Jy
! Component: 1800  -  total flux cleaned = -0.00617313 Jy
! Component: 1850  -  total flux cleaned = -0.00626287 Jy
! Component: 1900  -  total flux cleaned = -0.00626335 Jy
! Component: 1950  -  total flux cleaned = -0.00624142 Jy
! Component: 2000  -  total flux cleaned = -0.00624161 Jy
! Component: 2050  -  total flux cleaned = -0.006285 Jy
! Component: 2100  -  total flux cleaned = -0.00639205 Jy
! Component: 2150  -  total flux cleaned = -0.00637031 Jy
! Component: 2200  -  total flux cleaned = -0.00637022 Jy
! Component: 2250  -  total flux cleaned = -0.00634928 Jy
! Component: 2300  -  total flux cleaned = -0.00637004 Jy
! Component: 2350  -  total flux cleaned = -0.00645175 Jy
! Component: 2400  -  total flux cleaned = -0.00637023 Jy
! Component: 2450  -  total flux cleaned = -0.00634992 Jy
! Component: 2500  -  total flux cleaned = -0.00636992 Jy
! Component: 2550  -  total flux cleaned = -0.0063896 Jy
! Component: 2600  -  total flux cleaned = -0.00642883 Jy
! Component: 2650  -  total flux cleaned = -0.00642892 Jy
! Component: 2700  -  total flux cleaned = -0.0065064 Jy
! Component: 2750  -  total flux cleaned = -0.00660242 Jy
! Component: 2800  -  total flux cleaned = -0.00662151 Jy
! Component: 2850  -  total flux cleaned = -0.00664045 Jy
! Component: 2900  -  total flux cleaned = -0.00667821 Jy
! Component: 2950  -  total flux cleaned = -0.00675291 Jy
! Component: 3000  -  total flux cleaned = -0.00680869 Jy
! Component: 3050  -  total flux cleaned = -0.00686397 Jy
! Component: 3100  -  total flux cleaned = -0.00684554 Jy
! Component: 3150  -  total flux cleaned = -0.00691844 Jy
! Component: 3200  -  total flux cleaned = -0.00693643 Jy
! Component: 3250  -  total flux cleaned = -0.00697233 Jy
! Component: 3300  -  total flux cleaned = -0.00690087 Jy
! Component: 3350  -  total flux cleaned = -0.00695438 Jy
! Component: 3400  -  total flux cleaned = -0.00706046 Jy
! Component: 3450  -  total flux cleaned = -0.00707799 Jy
! Component: 3500  -  total flux cleaned = -0.00713036 Jy
! Component: 3550  -  total flux cleaned = -0.00714781 Jy
! Component: 3600  -  total flux cleaned = -0.00718225 Jy
! Component: 3650  -  total flux cleaned = -0.00725084 Jy
! Component: 3700  -  total flux cleaned = -0.00730209 Jy
! Component: 3750  -  total flux cleaned = -0.00742075 Jy
! Component: 3800  -  total flux cleaned = -0.00742066 Jy
! Component: 3850  -  total flux cleaned = -0.00750453 Jy
! Component: 3900  -  total flux cleaned = -0.00752129 Jy
! Component: 3950  -  total flux cleaned = -0.00758785 Jy
! Component: 4000  -  total flux cleaned = -0.00765396 Jy
! Component: 4050  -  total flux cleaned = -0.00773615 Jy
! Total flux subtracted in 4096 components = -0.00783429 Jy
! Clean residual min=-0.001087 max=0.000892 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0793607 Jy
keep
! Adding 240 model components to the UV plane model.
! The established model now contains 296 components and 0.0793607 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J1254-2000_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.511 x 8.519 at 1.228 degrees (North through East)
! Clean map  min=-0.0025087  max=0.07506 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1254-2000_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0750603 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000285382 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14061 1.14061 2.28122 4.56245 9.12489 18.2498 36.4996 72.9992
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  263.016 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J1254-2000_S_uvs.log closed on Sat Nov 29 13:53:45 2014