! Started logfile: /d2/scr/pima/rv101_uvs/J1230+1223_X_uvs.log on Sat Nov 29 16:34:04 2014 obs /d2/scr/pima/rv101_uvs/J1230+1223_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_X_uva.fits ! AN table 1: 23 integrations on 55 of 55 possible baselines. ! AN table 2: 9 integrations on 3 of 3 possible baselines. ! AN table 3: 9 integrations on 3 of 3 possible baselines. ! AN table 4: 9 integrations on 6 of 6 possible baselines. ! AN table 5: 9 integrations on 21 of 21 possible baselines. ! AN table 6: 9 integrations on 10 of 10 possible baselines. ! AN table 7: 9 integrations on 3 of 3 possible baselines. ! AN table 8: 259 integrations on 3 of 3 possible baselines. ! AN table 9: 13 integrations on 1 of 1 possible baselines. ! AN table 10: 32 integrations on 21 of 21 possible baselines. ! AN table 11: 91 integrations on 6 of 6 possible baselines. ! AN table 12: 32 integrations on 66 of 66 possible baselines. ! AN table 13: 21 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.634937 visibilities/baseline/integration-bin. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 15048 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1230+1223_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 112 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 549 telescope corrections were flagged in sub-array 8. ! A total of 26 telescope corrections were flagged in sub-array 9. ! A total of 106 telescope corrections were flagged in sub-array 10. ! A total of 118 telescope corrections were flagged in sub-array 11. ! A total of 180 telescope corrections were flagged in sub-array 12. ! A total of 32 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 2. ! A total of 112 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 549 telescope corrections were flagged in sub-array 8. ! A total of 26 telescope corrections were flagged in sub-array 9. ! A total of 106 telescope corrections were flagged in sub-array 10. ! A total of 118 telescope corrections were flagged in sub-array 11. ! A total of 180 telescope corrections were flagged in sub-array 12. ! A total of 32 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 777 telescope corrections were flagged in sub-array 8. ! A total of 26 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! A total of 202 telescope corrections were flagged in sub-array 11. ! A total of 202 telescope corrections were flagged in sub-array 12. ! A total of 63 telescope corrections were flagged in sub-array 13. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 777 telescope corrections were flagged in sub-array 8. ! A total of 26 telescope corrections were flagged in sub-array 9. ! A total of 132 telescope corrections were flagged in sub-array 10. ! A total of 202 telescope corrections were flagged in sub-array 11. ! A total of 202 telescope corrections were flagged in sub-array 12. ! A total of 63 telescope corrections were flagged in sub-array 13. ! ! Fit before self-cal, rms=1.557588Jy sigma=7.520933 ! Fit after self-cal, rms=0.665263Jy sigma=3.063934 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5588 mas, bmaj=1.438 mas, bpa=-11.28 degrees ! Estimated noise=2.19135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.686458 Jy ! Component: 100 - total flux cleaned = 0.981122 Jy ! Total flux subtracted in 100 components = 0.981122 Jy ! Clean residual min=-0.041110 max=0.151027 Jy/beam ! Clean residual mean=0.002822 rms=0.012984 Jy/beam ! Combined flux in latest and established models = 0.981122 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.981122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.548856Jy sigma=2.408836 ! Fit after self-cal, rms=0.544730Jy sigma=2.399341 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172822 Jy ! Component: 100 - total flux cleaned = 0.28839 Jy ! Total flux subtracted in 100 components = 0.28839 Jy ! Clean residual min=-0.031143 max=0.091146 Jy/beam ! Clean residual mean=0.002400 rms=0.009269 Jy/beam ! Combined flux in latest and established models = 1.26951 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 1.26951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440112Jy sigma=1.855241 ! Fit after self-cal, rms=0.437514Jy sigma=1.844630 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0903297 Jy ! Component: 100 - total flux cleaned = 0.156256 Jy ! Total flux subtracted in 100 components = 0.156256 Jy ! Clean residual min=-0.024525 max=0.065074 Jy/beam ! Clean residual mean=0.002171 rms=0.007783 Jy/beam ! Combined flux in latest and established models = 1.42577 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 1.42577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395345Jy sigma=1.632888 ! Fit after self-cal, rms=0.394223Jy sigma=1.628329 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-1.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657488 Jy ! Component: 100 - total flux cleaned = 0.112204 Jy ! Total flux subtracted in 100 components = 0.112204 Jy ! Clean residual min=-0.023743 max=0.050644 Jy/beam ! Clean residual mean=0.002006 rms=0.006936 Jy/beam ! Combined flux in latest and established models = 1.53797 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 1.53797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369578Jy sigma=1.501659 ! Fit after self-cal, rms=0.368959Jy sigma=1.496777 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-2.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571738 Jy ! Component: 100 - total flux cleaned = 0.0978038 Jy ! Total flux subtracted in 100 components = 0.0978038 Jy ! Clean residual min=-0.022021 max=0.043252 Jy/beam ! Clean residual mean=0.001861 rms=0.006225 Jy/beam ! Combined flux in latest and established models = 1.63578 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 1.63578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349196Jy sigma=1.389905 ! Fit after self-cal, rms=0.348549Jy sigma=1.382622 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043468 Jy ! Component: 100 - total flux cleaned = 0.0787758 Jy ! Total flux subtracted in 100 components = 0.0787758 Jy ! Clean residual min=-0.020831 max=0.033266 Jy/beam ! Clean residual mean=0.001745 rms=0.005717 Jy/beam ! Combined flux in latest and established models = 1.71455 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 87 components and 1.71455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335094Jy sigma=1.311637 ! Fit after self-cal, rms=0.334901Jy sigma=1.310498 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5978 mas, bmaj=1.664 mas, bpa=-11.15 degrees ! Estimated noise=1.69204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0775523 Jy ! Component: 100 - total flux cleaned = 0.137222 Jy ! Component: 150 - total flux cleaned = 0.186323 Jy ! Component: 200 - total flux cleaned = 0.227533 Jy ! Total flux subtracted in 200 components = 0.227533 Jy ! Clean residual min=-0.022529 max=0.035070 Jy/beam ! Clean residual mean=0.004219 rms=0.007817 Jy/beam ! Combined flux in latest and established models = 1.94209 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 149 components and 1.94209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301769Jy sigma=1.155834 ! Fit after self-cal, rms=0.300377Jy sigma=1.149305 ! Inverting map ! Your choice of large map pixels excluded 3.38% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5978 x 1.664 at -11.15 degrees (North through East) ! Clean map min=-0.020684 max=0.88988 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.08 LA 0.98 MA 1.05 ! MK 1.07 NL 1.00 NY 1.00 ON 0.92 ! OV 1.02 PT 0.99 SC 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.12 KP 1.00* LA 0.99 MK 1.05 ! NL 1.04 OV 1.01 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.11 KP 1.00* LA 1.08 MK 0.99 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! A total of 228 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.02 NY 0.97 ON 0.87 WF 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.92 HN 1.08 KP 1.00* LA 0.97 ! MA 0.98 NL 1.03 NY 1.08 ON 0.92 ! OV 0.97 PT 0.95 SC 1.04 WF 0.87 ! ! A total of 24 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.12 LA 0.94 MA 1.11 ! MK 1.09 NL 1.00 NY 0.98 ON 0.91 ! OV 1.01 PT 0.89 SC 1.10 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.12 KP 1.00* LA 0.99 MK 1.03 ! NL 1.06 OV 1.00 PT 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.10 KP 1.00* LA 1.05 MK 0.99 ! PT 0.89 ! ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! A total of 228 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.96 NY 0.93 ON 0.91 WF 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.90 HN 1.09 KP 1.00* LA 0.90 ! MA 0.96 NL 1.04 NY 1.06 ON 0.90 ! OV 0.97 PT 0.87 SC 1.07 WF 0.88 ! ! A total of 24 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.11 LA 1.01 MA 1.09 ! MK 1.07 NL 1.05 NY 1.00* ON 1.08 ! OV 1.09 PT 0.89 SC 1.03 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.16 KP 1.00* LA 1.02 MK 1.01 ! NL 1.15 OV 1.09 PT 0.88 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.11 KP 1.00* LA 1.16 MK 0.96 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 162 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.89 HN 1.11 KP 1.00* LA 0.98 ! MA 1.13 NL 1.07 NY 1.00* ON 1.00 ! OV 1.06 PT 0.90 SC 1.02 WF 0.90 ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.08 LA 1.00 MA 1.19 ! MK 1.08 NL 1.04 NY 1.00* ON 1.16 ! OV 1.05 PT 0.92 SC 1.04 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.97 NL 1.15 SC 1.10 WF 0.87 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.19 KP 1.00* LA 1.01 MK 1.07 ! NL 1.11 OV 1.05 PT 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.13 KP 1.00* LA 1.16 MK 0.99 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* ON 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 162 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.97 HN 1.08 KP 1.00* LA 1.00 ! MA 1.12 NL 1.08 NY 1.00* ON 1.06 ! OV 1.04 PT 0.91 SC 1.03 WF 0.96 ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! ! Fit before self-cal, rms=0.300377Jy sigma=1.149305 ! Fit after self-cal, rms=0.252902Jy sigma=1.001289 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5936 mas, bmaj=1.734 mas, bpa=-12.22 degrees ! Estimated noise=1.73005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333064 Jy ! Component: 100 - total flux cleaned = 0.0553352 Jy ! Component: 150 - total flux cleaned = 0.0724258 Jy ! Component: 200 - total flux cleaned = 0.0864313 Jy ! Total flux subtracted in 200 components = 0.0864313 Jy ! Clean residual min=-0.013654 max=0.024952 Jy/beam ! Clean residual mean=0.003419 rms=0.004484 Jy/beam ! Combined flux in latest and established models = 2.02852 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 188 components and 2.02852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245828Jy sigma=0.970971 ! Fit after self-cal, rms=0.245182Jy sigma=0.967459 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-17.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256891 Jy ! Component: 100 - total flux cleaned = 0.0428507 Jy ! Component: 150 - total flux cleaned = 0.057273 Jy ! Component: 200 - total flux cleaned = 0.0697366 Jy ! Total flux subtracted in 200 components = 0.0697366 Jy ! Clean residual min=-0.012671 max=0.020377 Jy/beam ! Clean residual mean=0.003124 rms=0.003971 Jy/beam ! Combined flux in latest and established models = 2.09825 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 244 components and 2.09825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240183Jy sigma=0.950524 ! Fit after self-cal, rms=0.239907Jy sigma=0.949071 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (12.8, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224743 Jy ! Component: 100 - total flux cleaned = 0.0372245 Jy ! Component: 150 - total flux cleaned = 0.0492347 Jy ! Component: 200 - total flux cleaned = 0.0599242 Jy ! Total flux subtracted in 200 components = 0.0599242 Jy ! Clean residual min=-0.011099 max=0.017115 Jy/beam ! Clean residual mean=0.002915 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 2.15818 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 280 components and 2.15818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236137Jy sigma=0.935354 ! Fit after self-cal, rms=0.236011Jy sigma=0.934387 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-13.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179206 Jy ! Component: 100 - total flux cleaned = 0.0296934 Jy ! Component: 150 - total flux cleaned = 0.0395985 Jy ! Component: 200 - total flux cleaned = 0.0485529 Jy ! Total flux subtracted in 200 components = 0.0485529 Jy ! Clean residual min=-0.009858 max=0.015522 Jy/beam ! Clean residual mean=0.002714 rms=0.003234 Jy/beam ! Combined flux in latest and established models = 2.20673 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 318 components and 2.20673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233408Jy sigma=0.926161 ! Fit after self-cal, rms=0.233165Jy sigma=0.925077 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233165Jy sigma=0.925077 ! Fit after self-cal, rms=0.227747Jy sigma=0.914868 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5943 mas, bmaj=1.735 mas, bpa=-12.2 degrees ! Estimated noise=1.72727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119469 Jy ! Component: 100 - total flux cleaned = 0.0218643 Jy ! Component: 150 - total flux cleaned = 0.0307898 Jy ! Component: 200 - total flux cleaned = 0.0389548 Jy ! Total flux subtracted in 200 components = 0.0389548 Jy ! Clean residual min=-0.009426 max=0.013622 Jy/beam ! Clean residual mean=0.002441 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 2.24569 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 340 components and 2.24569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226126Jy sigma=0.909816 ! Fit after self-cal, rms=0.226044Jy sigma=0.909542 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, 21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143215 Jy ! Component: 100 - total flux cleaned = 0.023875 Jy ! Component: 150 - total flux cleaned = 0.0321877 Jy ! Component: 200 - total flux cleaned = 0.0397651 Jy ! Total flux subtracted in 200 components = 0.0397651 Jy ! Clean residual min=-0.008665 max=0.013056 Jy/beam ! Clean residual mean=0.002303 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 2.28545 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 374 components and 2.28545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224284Jy sigma=0.903660 ! Fit after self-cal, rms=0.224296Jy sigma=0.903248 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (5.4, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117673 Jy ! Component: 100 - total flux cleaned = 0.0198513 Jy ! Component: 150 - total flux cleaned = 0.0272715 Jy ! Component: 200 - total flux cleaned = 0.0342853 Jy ! Total flux subtracted in 200 components = 0.0342853 Jy ! Clean residual min=-0.008963 max=0.012077 Jy/beam ! Clean residual mean=0.002187 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 2.31974 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 409 components and 2.31974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222952Jy sigma=0.899437 ! Fit after self-cal, rms=0.222945Jy sigma=0.899260 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-27.2, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126323 Jy ! Component: 100 - total flux cleaned = 0.0207065 Jy ! Component: 150 - total flux cleaned = 0.0277561 Jy ! Component: 200 - total flux cleaned = 0.0343795 Jy ! Total flux subtracted in 200 components = 0.0343795 Jy ! Clean residual min=-0.008804 max=0.011472 Jy/beam ! Clean residual mean=0.002078 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 2.35412 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 441 components and 2.35412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221632Jy sigma=0.894688 ! Fit after self-cal, rms=0.221605Jy sigma=0.894375 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-18.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011841 Jy ! Component: 100 - total flux cleaned = 0.0196976 Jy ! Component: 150 - total flux cleaned = 0.0265676 Jy ! Component: 200 - total flux cleaned = 0.0329831 Jy ! Total flux subtracted in 200 components = 0.0329831 Jy ! Clean residual min=-0.008338 max=0.010815 Jy/beam ! Clean residual mean=0.001944 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 2.3871 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 461 components and 2.3871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220392Jy sigma=0.890509 ! Fit after self-cal, rms=0.220356Jy sigma=0.890300 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-8.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117906 Jy ! Component: 100 - total flux cleaned = 0.0195848 Jy ! Component: 150 - total flux cleaned = 0.0260789 Jy ! Component: 200 - total flux cleaned = 0.032025 Jy ! Total flux subtracted in 200 components = 0.032025 Jy ! Clean residual min=-0.007884 max=0.010136 Jy/beam ! Clean residual mean=0.001813 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 2.41912 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 507 components and 2.41912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219158Jy sigma=0.886441 ! Fit after self-cal, rms=0.219138Jy sigma=0.886050 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-15, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105241 Jy ! Component: 100 - total flux cleaned = 0.0176173 Jy ! Component: 150 - total flux cleaned = 0.0238528 Jy ! Component: 200 - total flux cleaned = 0.0296935 Jy ! Total flux subtracted in 200 components = 0.0296935 Jy ! Clean residual min=-0.006877 max=0.008628 Jy/beam ! Clean residual mean=0.001715 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 2.44882 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 543 components and 2.44881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218060Jy sigma=0.883143 ! Fit after self-cal, rms=0.218039Jy sigma=0.882823 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-20.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00905352 Jy ! Component: 100 - total flux cleaned = 0.0155014 Jy ! Component: 150 - total flux cleaned = 0.0212826 Jy ! Component: 200 - total flux cleaned = 0.0266871 Jy ! Total flux subtracted in 200 components = 0.0266871 Jy ! Clean residual min=-0.006787 max=0.008894 Jy/beam ! Clean residual mean=0.001615 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 2.4755 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 569 components and 2.4755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217181Jy sigma=0.880732 ! Fit after self-cal, rms=0.217170Jy sigma=0.880521 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (8.4, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814302 Jy ! Component: 100 - total flux cleaned = 0.0139893 Jy ! Component: 150 - total flux cleaned = 0.0194316 Jy ! Component: 200 - total flux cleaned = 0.0245817 Jy ! Total flux subtracted in 200 components = 0.0245817 Jy ! Clean residual min=-0.006590 max=0.008241 Jy/beam ! Clean residual mean=0.001524 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 2.50008 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 591 components and 2.50008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216448Jy sigma=0.878378 ! Fit after self-cal, rms=0.216437Jy sigma=0.878256 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (48, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817157 Jy ! Component: 100 - total flux cleaned = 0.0136669 Jy ! Component: 150 - total flux cleaned = 0.018779 Jy ! Component: 200 - total flux cleaned = 0.0236428 Jy ! Total flux subtracted in 200 components = 0.0236428 Jy ! Clean residual min=-0.006460 max=0.008168 Jy/beam ! Clean residual mean=0.001453 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 2.52373 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 615 components and 2.52373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215764Jy sigma=0.876149 ! Fit after self-cal, rms=0.215745Jy sigma=0.876048 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-22.2, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710673 Jy ! Component: 100 - total flux cleaned = 0.0121332 Jy ! Component: 150 - total flux cleaned = 0.0169144 Jy ! Component: 200 - total flux cleaned = 0.0215173 Jy ! Total flux subtracted in 200 components = 0.0215173 Jy ! Clean residual min=-0.006359 max=0.007798 Jy/beam ! Clean residual mean=0.001380 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 2.54524 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 643 components and 2.54524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215241Jy sigma=0.874325 ! Fit after self-cal, rms=0.215204Jy sigma=0.874229 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-29.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680384 Jy ! Component: 100 - total flux cleaned = 0.0115524 Jy ! Component: 150 - total flux cleaned = 0.0160541 Jy ! Component: 200 - total flux cleaned = 0.0203775 Jy ! Total flux subtracted in 200 components = 0.0203775 Jy ! Clean residual min=-0.006696 max=0.007034 Jy/beam ! Clean residual mean=0.001308 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 2.56562 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 666 components and 2.56562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214696Jy sigma=0.872800 ! Fit after self-cal, rms=0.214678Jy sigma=0.872694 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214678Jy sigma=0.872694 ! Fit after self-cal, rms=0.211425Jy sigma=0.865637 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5948 mas, bmaj=1.735 mas, bpa=-12.16 degrees ! Estimated noise=1.72665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547728 Jy ! Component: 100 - total flux cleaned = 0.0100238 Jy ! Component: 150 - total flux cleaned = 0.0141679 Jy ! Component: 200 - total flux cleaned = 0.018076 Jy ! Total flux subtracted in 200 components = 0.018076 Jy ! Clean residual min=-0.005616 max=0.007463 Jy/beam ! Clean residual mean=0.001011 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 2.5837 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 693 components and 2.5837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211068Jy sigma=0.864532 ! Fit after self-cal, rms=0.211049Jy sigma=0.864447 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, -31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650169 Jy ! Component: 100 - total flux cleaned = 0.0105733 Jy ! Component: 150 - total flux cleaned = 0.0143798 Jy ! Component: 200 - total flux cleaned = 0.0178606 Jy ! Total flux subtracted in 200 components = 0.0178606 Jy ! Clean residual min=-0.005525 max=0.006374 Jy/beam ! Clean residual mean=0.000949 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 2.60156 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 717 components and 2.60156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210698Jy sigma=0.863127 ! Fit after self-cal, rms=0.210678Jy sigma=0.863037 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (41.2, 36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557937 Jy ! Component: 100 - total flux cleaned = 0.00934655 Jy ! Component: 150 - total flux cleaned = 0.0128898 Jy ! Component: 200 - total flux cleaned = 0.0160138 Jy ! Total flux subtracted in 200 components = 0.0160138 Jy ! Clean residual min=-0.005530 max=0.005938 Jy/beam ! Clean residual mean=0.000892 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 2.61757 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 741 components and 2.61757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210386Jy sigma=0.862012 ! Fit after self-cal, rms=0.210371Jy sigma=0.861957 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210371Jy sigma=0.861957 ! Fit after self-cal, rms=0.208827Jy sigma=0.859067 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=2.115 mas, bmaj=3.001 mas, bpa=2.141 degrees ! Estimated noise=2.55738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835712 Jy ! Component: 100 - total flux cleaned = 0.0155455 Jy ! Component: 150 - total flux cleaned = 0.02204 Jy ! Component: 200 - total flux cleaned = 0.02801 Jy ! Total flux subtracted in 200 components = 0.02801 Jy ! Clean residual min=-0.006528 max=0.009745 Jy/beam ! Clean residual mean=0.002043 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 2.64558 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 760 components and 2.64558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208621Jy sigma=0.858632 ! Fit after self-cal, rms=0.208582Jy sigma=0.858530 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00980482 Jy ! Component: 100 - total flux cleaned = 0.0164806 Jy ! Component: 150 - total flux cleaned = 0.0224711 Jy ! Component: 200 - total flux cleaned = 0.0280061 Jy ! Total flux subtracted in 200 components = 0.0280061 Jy ! Clean residual min=-0.005437 max=0.008792 Jy/beam ! Clean residual mean=0.001771 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 2.67359 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 795 components and 2.67359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208295Jy sigma=0.857366 ! Fit after self-cal, rms=0.208257Jy sigma=0.857231 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5948 mas, bmaj=1.734 mas, bpa=-12.14 degrees ! Estimated noise=1.72629 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5948 x 1.734 at -12.14 degrees (North through East) ! Clean map min=-0.0042798 max=0.87622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208257Jy sigma=0.857231 ! Fit after self-cal, rms=0.200974Jy sigma=0.822467 ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5941 mas, bmaj=1.734 mas, bpa=-12.15 degrees ! Estimated noise=1.7208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050027 Jy ! Component: 100 - total flux cleaned = 0.00723158 Jy ! Component: 150 - total flux cleaned = 0.00924987 Jy ! Component: 200 - total flux cleaned = 0.0113916 Jy ! Total flux subtracted in 200 components = 0.0113916 Jy ! Clean residual min=-0.005206 max=0.005388 Jy/beam ! Clean residual mean=0.000409 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 2.68498 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 823 components and 2.68498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200697Jy sigma=0.821218 ! Fit after self-cal, rms=0.200709Jy sigma=0.821173 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-38, -26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451874 Jy ! Component: 100 - total flux cleaned = 0.00686076 Jy ! Component: 150 - total flux cleaned = 0.00832949 Jy ! Component: 200 - total flux cleaned = 0.00974253 Jy ! Total flux subtracted in 200 components = 0.00974253 Jy ! Clean residual min=-0.005437 max=0.005303 Jy/beam ! Clean residual mean=0.000378 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 2.69472 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 847 components and 2.69472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200514Jy sigma=0.820161 ! Fit after self-cal, rms=0.200510Jy sigma=0.820115 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200510Jy sigma=0.820115 ! Fit after self-cal, rms=0.200393Jy sigma=0.819900 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.5554 mas, bmaj=1.47 mas, bpa=-12.21 degrees ! Estimated noise=2.33076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.682151 Jy ! Component: 100 - total flux cleaned = 0.978017 Jy ! Component: 150 - total flux cleaned = 1.15196 Jy ! Component: 200 - total flux cleaned = 1.27536 Jy ! Total flux subtracted in 200 components = 1.27536 Jy ! Clean residual min=-0.027332 max=0.071623 Jy/beam ! Clean residual mean=0.002731 rms=0.009465 Jy/beam ! Combined flux in latest and established models = 1.27536 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 1.27536 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.594 mas, bmaj=1.735 mas, bpa=-12.16 degrees ! Estimated noise=1.72038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161317 Jy ! Component: 100 - total flux cleaned = 0.280252 Jy ! Component: 150 - total flux cleaned = 0.373115 Jy ! Component: 200 - total flux cleaned = 0.448197 Jy ! Total flux subtracted in 200 components = 0.448197 Jy ! Clean residual min=-0.026588 max=0.047618 Jy/beam ! Clean residual mean=0.004204 rms=0.009039 Jy/beam ! Combined flux in latest and established models = 1.72356 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 100 components and 1.72356 Jy ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (1, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625289 Jy ! Component: 100 - total flux cleaned = 0.114749 Jy ! Component: 150 - total flux cleaned = 0.158864 Jy ! Component: 200 - total flux cleaned = 0.196853 Jy ! Total flux subtracted in 200 components = 0.196853 Jy ! Clean residual min=-0.019036 max=0.025456 Jy/beam ! Clean residual mean=0.003375 rms=0.005865 Jy/beam ! Combined flux in latest and established models = 1.92041 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 166 components and 1.92041 Jy ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (-11.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336394 Jy ! Component: 100 - total flux cleaned = 0.063751 Jy ! Component: 150 - total flux cleaned = 0.0910353 Jy ! Component: 200 - total flux cleaned = 0.115972 Jy ! Total flux subtracted in 200 components = 0.115972 Jy ! Clean residual min=-0.015064 max=0.019164 Jy/beam ! Clean residual mean=0.002886 rms=0.004493 Jy/beam ! Combined flux in latest and established models = 2.03639 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 234 components and 2.03639 Jy ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Added new window around map position (17, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234348 Jy ! Component: 100 - total flux cleaned = 0.0447922 Jy ! Component: 150 - total flux cleaned = 0.0646775 Jy ! Component: 200 - total flux cleaned = 0.0833203 Jy ! Total flux subtracted in 200 components = 0.0833203 Jy ! Clean residual min=-0.012619 max=0.015116 Jy/beam ! Clean residual mean=0.002543 rms=0.003688 Jy/beam ! Combined flux in latest and established models = 2.11971 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 295 components and 2.11971 Jy ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=2.112 mas, bmaj=2.998 mas, bpa=2.256 degrees ! Estimated noise=2.5557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468214 Jy ! Component: 100 - total flux cleaned = 0.0853294 Jy ! Component: 150 - total flux cleaned = 0.119053 Jy ! Component: 200 - total flux cleaned = 0.149043 Jy ! Total flux subtracted in 200 components = 0.149043 Jy ! Clean residual min=-0.018617 max=0.024932 Jy/beam ! Clean residual mean=0.006094 rms=0.006291 Jy/beam ! Combined flux in latest and established models = 2.26875 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268961 Jy ! Component: 100 - total flux cleaned = 0.0512268 Jy ! Component: 150 - total flux cleaned = 0.0733539 Jy ! Component: 200 - total flux cleaned = 0.0936165 Jy ! Total flux subtracted in 200 components = 0.0936165 Jy ! Clean residual min=-0.012517 max=0.019265 Jy/beam ! Clean residual mean=0.004970 rms=0.004619 Jy/beam ! Combined flux in latest and established models = 2.36237 Jy ! Adding 177 model components to the UV plane model. ! The established model now contains 428 components and 2.36237 Jy ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! Estimated beam: bmin=0.594 mas, bmaj=1.735 mas, bpa=-12.16 degrees ! Estimated noise=1.72038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121471 Jy ! Component: 100 - total flux cleaned = 0.0230313 Jy ! Component: 150 - total flux cleaned = 0.0331761 Jy ! Component: 200 - total flux cleaned = 0.0427181 Jy ! Total flux subtracted in 200 components = 0.0427181 Jy ! Clean residual min=-0.006702 max=0.008964 Jy/beam ! Clean residual mean=0.001435 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 2.40508 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 466 components and 2.40508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205873Jy sigma=0.841523 ! Fit after self-cal, rms=0.205388Jy sigma=0.838451 wmodel /d2/scr/pima/rv101_uvs/J1230+1223_X_map.mod ! Writing 466 model components to file: /d2/scr/pima/rv101_uvs/J1230+1223_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1230+1223_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1230+1223_X_map.win ! wwins: Wrote 28 windows to /d2/scr/pima/rv101_uvs/J1230+1223_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383975 Jy ! Component: 100 - total flux cleaned = 0.00746025 Jy ! Component: 150 - total flux cleaned = 0.0109442 Jy ! Component: 200 - total flux cleaned = 0.0143225 Jy ! Component: 250 - total flux cleaned = 0.0176176 Jy ! Component: 300 - total flux cleaned = 0.0208406 Jy ! Component: 350 - total flux cleaned = 0.0239994 Jy ! Component: 400 - total flux cleaned = 0.0270995 Jy ! Component: 450 - total flux cleaned = 0.0301465 Jy ! Component: 500 - total flux cleaned = 0.0331446 Jy ! Component: 550 - total flux cleaned = 0.0360981 Jy ! Component: 600 - total flux cleaned = 0.0390085 Jy ! Component: 650 - total flux cleaned = 0.0417626 Jy ! Component: 700 - total flux cleaned = 0.0445921 Jy ! Component: 750 - total flux cleaned = 0.0471613 Jy ! Component: 800 - total flux cleaned = 0.0499201 Jy ! Component: 850 - total flux cleaned = 0.0524282 Jy ! Component: 900 - total flux cleaned = 0.055124 Jy ! Component: 950 - total flux cleaned = 0.0575766 Jy ! Component: 1000 - total flux cleaned = 0.060004 Jy ! Component: 1050 - total flux cleaned = 0.0623026 Jy ! Component: 1100 - total flux cleaned = 0.0648873 Jy ! Component: 1150 - total flux cleaned = 0.0672422 Jy ! Component: 1200 - total flux cleaned = 0.0695739 Jy ! Component: 1250 - total flux cleaned = 0.0719838 Jy ! Component: 1300 - total flux cleaned = 0.0742715 Jy ! Component: 1350 - total flux cleaned = 0.0764406 Jy ! Component: 1400 - total flux cleaned = 0.0787859 Jy ! Component: 1450 - total flux cleaned = 0.0809171 Jy ! Component: 1500 - total flux cleaned = 0.083126 Jy ! Component: 1550 - total flux cleaned = 0.0853158 Jy ! Component: 1600 - total flux cleaned = 0.0874864 Jy ! Component: 1650 - total flux cleaned = 0.0896395 Jy ! Component: 1700 - total flux cleaned = 0.0917735 Jy ! Component: 1750 - total flux cleaned = 0.093706 Jy ! Component: 1800 - total flux cleaned = 0.0957152 Jy ! Component: 1850 - total flux cleaned = 0.0978887 Jy ! Component: 1900 - total flux cleaned = 0.0998663 Jy ! Component: 1950 - total flux cleaned = 0.101917 Jy ! Component: 2000 - total flux cleaned = 0.103864 Jy ! Component: 2050 - total flux cleaned = 0.105796 Jy ! Component: 2100 - total flux cleaned = 0.107801 Jy ! Component: 2150 - total flux cleaned = 0.109704 Jy ! Component: 2200 - total flux cleaned = 0.111679 Jy ! Component: 2250 - total flux cleaned = 0.113555 Jy ! Component: 2300 - total flux cleaned = 0.1155 Jy ! Component: 2350 - total flux cleaned = 0.117096 Jy ! Component: 2400 - total flux cleaned = 0.119097 Jy ! Component: 2450 - total flux cleaned = 0.121001 Jy ! Component: 2500 - total flux cleaned = 0.122808 Jy ! Component: 2550 - total flux cleaned = 0.124602 Jy ! Component: 2600 - total flux cleaned = 0.126384 Jy ! Component: 2650 - total flux cleaned = 0.128234 Jy ! Component: 2700 - total flux cleaned = 0.129993 Jy ! Component: 2750 - total flux cleaned = 0.131817 Jy ! Component: 2800 - total flux cleaned = 0.133552 Jy ! Component: 2850 - total flux cleaned = 0.135274 Jy ! Component: 2900 - total flux cleaned = 0.137062 Jy ! Component: 2950 - total flux cleaned = 0.138762 Jy ! Component: 3000 - total flux cleaned = 0.140373 Jy ! Component: 3050 - total flux cleaned = 0.142279 Jy ! Component: 3100 - total flux cleaned = 0.143869 Jy ! Component: 3150 - total flux cleaned = 0.14545 Jy ! Component: 3200 - total flux cleaned = 0.14717 Jy ! Component: 3250 - total flux cleaned = 0.148581 Jy ! Component: 3300 - total flux cleaned = 0.15028 Jy ! Component: 3350 - total flux cleaned = 0.151821 Jy ! Component: 3400 - total flux cleaned = 0.153352 Jy ! Component: 3450 - total flux cleaned = 0.155019 Jy ! Component: 3500 - total flux cleaned = 0.156603 Jy ! Component: 3550 - total flux cleaned = 0.158107 Jy ! Component: 3600 - total flux cleaned = 0.159744 Jy ! Component: 3650 - total flux cleaned = 0.16123 Jy ! Component: 3700 - total flux cleaned = 0.162706 Jy ! Component: 3750 - total flux cleaned = 0.164245 Jy ! Component: 3800 - total flux cleaned = 0.165843 Jy ! Component: 3850 - total flux cleaned = 0.167433 Jy ! Component: 3900 - total flux cleaned = 0.168875 Jy ! Component: 3950 - total flux cleaned = 0.170378 Jy ! Component: 4000 - total flux cleaned = 0.171872 Jy ! Component: 4050 - total flux cleaned = 0.173426 Jy ! Total flux subtracted in 4096 components = 0.17477 Jy ! Clean residual min=-0.003358 max=0.003507 Jy/beam ! Clean residual mean=0.000863 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 2.57985 Jy keep ! Adding 385 model components to the UV plane model. ! The established model now contains 845 components and 2.57986 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1230+1223_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.594 x 1.735 at -12.16 degrees (North through East) ! Clean map min=-0.0047453 max=0.86942 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.869415 invert ! Inverting map ! Your choice of large map pixels excluded 3.95% of the data. ! The x-axis pixel size should ideally be below 0.1601 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00102925 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.355152 0.355152 0.710304 1.42061 2.84121 5.68243 11.3649 22.7297 45.4594 90.9189 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.869 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 844.709 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1230+1223_X_uvs.log closed on Sat Nov 29 16:34:12 2014