! Started logfile: /d2/scr/pima/rv101_uvs/J1230+1223_S_uvs.log on Sat Nov 29 13:53:33 2014 obs /d2/scr/pima/rv101_uvs/J1230+1223_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_S_uva.fits ! AN table 1: 5 integrations on 55 of 55 possible baselines. ! AN table 2: 2 integrations on 3 of 3 possible baselines. ! AN table 3: 2 integrations on 3 of 3 possible baselines. ! AN table 4: 2 integrations on 6 of 6 possible baselines. ! AN table 5: 2 integrations on 21 of 21 possible baselines. ! AN table 6: 2 integrations on 10 of 10 possible baselines. ! AN table 7: 2 integrations on 3 of 3 possible baselines. ! AN table 8: 3 integrations on 1 of 1 possible baselines. ! AN table 9: 60 integrations on 3 of 3 possible baselines. ! AN table 10: 3 integrations on 1 of 1 possible baselines. ! AN table 11: 8 integrations on 21 of 21 possible baselines. ! AN table 12: 21 integrations on 6 of 6 possible baselines. ! AN table 13: 8 integrations on 66 of 66 possible baselines. ! AN table 14: 5 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.708897 visibilities/baseline/integration-bin. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3984 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1230+1223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 126 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 23 telescope corrections were flagged in sub-array 11. ! A total of 24 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 5 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 180 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 29 telescope corrections were flagged in sub-array 11. ! A total of 36 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 11 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 102 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 23 telescope corrections were flagged in sub-array 11. ! A total of 17 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 5 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 174 telescope corrections were flagged in sub-array 9. ! A total of 6 telescope corrections were flagged in sub-array 10. ! A total of 29 telescope corrections were flagged in sub-array 11. ! A total of 36 telescope corrections were flagged in sub-array 12. ! A total of 33 telescope corrections were flagged in sub-array 13. ! A total of 11 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=2.001123Jy sigma=4.715210 ! Fit after self-cal, rms=1.113529Jy sigma=2.142857 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=5.546 mas, bpa=-22.29 degrees ! Estimated noise=7.19581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.889951 Jy ! Component: 100 - total flux cleaned = 1.27099 Jy ! Total flux subtracted in 100 components = 1.27099 Jy ! Clean residual min=-0.077759 max=0.222890 Jy/beam ! Clean residual mean=-0.001440 rms=0.021135 Jy/beam ! Combined flux in latest and established models = 1.27099 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.27099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979013Jy sigma=1.625860 ! Fit after self-cal, rms=0.973932Jy sigma=1.623402 ! Inverting map ! Added new window around map position (-4.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242391 Jy ! Component: 100 - total flux cleaned = 0.403609 Jy ! Total flux subtracted in 100 components = 0.403609 Jy ! Clean residual min=-0.065116 max=0.118093 Jy/beam ! Clean residual mean=-0.001178 rms=0.015844 Jy/beam ! Combined flux in latest and established models = 1.67459 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 1.67459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.853446Jy sigma=1.218450 ! Fit after self-cal, rms=0.850478Jy sigma=1.211269 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122121 Jy ! Component: 100 - total flux cleaned = 0.212385 Jy ! Total flux subtracted in 100 components = 0.212385 Jy ! Clean residual min=-0.075466 max=0.091598 Jy/beam ! Clean residual mean=-0.001036 rms=0.014141 Jy/beam ! Combined flux in latest and established models = 1.88698 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 1.88698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.807860Jy sigma=1.090737 ! Fit after self-cal, rms=0.807153Jy sigma=1.087954 ! Inverting map ! Added new window around map position (-17.5, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937564 Jy ! Component: 100 - total flux cleaned = 0.164571 Jy ! Total flux subtracted in 100 components = 0.164571 Jy ! Clean residual min=-0.074158 max=0.063214 Jy/beam ! Clean residual mean=-0.000921 rms=0.012925 Jy/beam ! Combined flux in latest and established models = 2.05155 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 2.05155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.779671Jy sigma=0.991640 ! Fit after self-cal, rms=0.778595Jy sigma=0.987779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=6.475 mas, bpa=-21.68 degrees ! Estimated noise=5.45356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102362 Jy ! Component: 100 - total flux cleaned = 0.171712 Jy ! Component: 150 - total flux cleaned = 0.224141 Jy ! Component: 200 - total flux cleaned = 0.264169 Jy ! Total flux subtracted in 200 components = 0.264169 Jy ! Clean residual min=-0.062506 max=0.059345 Jy/beam ! Clean residual mean=-0.004100 rms=0.012864 Jy/beam ! Combined flux in latest and established models = 2.31572 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 113 components and 2.31572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749087Jy sigma=0.906564 ! Fit after self-cal, rms=0.747175Jy sigma=0.898703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.738 x 6.475 at -21.68 degrees (North through East) ! Clean map min=-0.062735 max=1.1204 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.87 NL 1.17 SC 1.19 WF 1.17 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 KP 1.07 LA 1.10 MK 0.88 ! NL 1.04 OV 1.03 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! PT 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! PT 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.93 KP 1.02 LA 0.96 MK 0.97 ! PT 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MK 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.91 KP 0.90 LA 0.84 MK 1.02 ! PT 0.89 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! ! Fit before self-cal, rms=0.747175Jy sigma=0.898703 ! Fit after self-cal, rms=0.581970Jy sigma=0.847646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.741 mas, bpa=-22.57 degrees ! Estimated noise=5.83099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457094 Jy ! Component: 100 - total flux cleaned = 0.0758372 Jy ! Component: 150 - total flux cleaned = 0.0969191 Jy ! Component: 200 - total flux cleaned = 0.110668 Jy ! Total flux subtracted in 200 components = 0.110668 Jy ! Clean residual min=-0.057886 max=0.047044 Jy/beam ! Clean residual mean=-0.003827 rms=0.012471 Jy/beam ! Combined flux in latest and established models = 2.42639 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 2.42639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572163Jy sigma=0.836740 ! Fit after self-cal, rms=0.571619Jy sigma=0.834289 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.571619Jy sigma=0.834289 ! Fit after self-cal, rms=0.571549Jy sigma=0.832881 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=6.737 mas, bpa=-22.57 degrees ! Estimated noise=5.83627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193891 Jy ! Component: 100 - total flux cleaned = 0.0263438 Jy ! Component: 150 - total flux cleaned = 0.0297953 Jy ! Component: 200 - total flux cleaned = 0.0328722 Jy ! Total flux subtracted in 200 components = 0.0328722 Jy ! Clean residual min=-0.057217 max=0.046930 Jy/beam ! Clean residual mean=-0.004042 rms=0.012203 Jy/beam ! Combined flux in latest and established models = 2.45926 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 2.45926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568947Jy sigma=0.831507 ! Fit after self-cal, rms=0.568687Jy sigma=0.831094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441112 Jy ! Component: 100 - total flux cleaned = 0.00609072 Jy ! Component: 150 - total flux cleaned = 0.00725575 Jy ! Component: 200 - total flux cleaned = 0.00908491 Jy ! Total flux subtracted in 200 components = 0.00908491 Jy ! Clean residual min=-0.056473 max=0.046530 Jy/beam ! Clean residual mean=-0.004123 rms=0.012104 Jy/beam ! Combined flux in latest and established models = 2.46835 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 148 components and 2.46835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567168Jy sigma=0.830127 ! Fit after self-cal, rms=0.567046Jy sigma=0.830002 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567046Jy sigma=0.830002 ! Fit after self-cal, rms=0.567037Jy sigma=0.829799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=6.736 mas, bpa=-22.57 degrees ! Estimated noise=5.83783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492283 Jy ! Component: 100 - total flux cleaned = 0.0059964 Jy ! Component: 150 - total flux cleaned = 0.00734922 Jy ! Component: 200 - total flux cleaned = 0.00800517 Jy ! Total flux subtracted in 200 components = 0.00800517 Jy ! Clean residual min=-0.056410 max=0.046374 Jy/beam ! Clean residual mean=-0.004167 rms=0.012054 Jy/beam ! Combined flux in latest and established models = 2.47635 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 153 components and 2.47635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565908Jy sigma=0.829458 ! Fit after self-cal, rms=0.565794Jy sigma=0.829385 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987597 Jy ! Component: 100 - total flux cleaned = 0.00162703 Jy ! Component: 150 - total flux cleaned = 0.00224484 Jy ! Component: 200 - total flux cleaned = 0.00284323 Jy ! Total flux subtracted in 200 components = 0.00284323 Jy ! Clean residual min=-0.056130 max=0.046145 Jy/beam ! Clean residual mean=-0.004193 rms=0.012020 Jy/beam ! Combined flux in latest and established models = 2.4792 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 2.4792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565158Jy sigma=0.828597 ! Fit after self-cal, rms=0.565082Jy sigma=0.828548 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565082Jy sigma=0.828548 ! Fit after self-cal, rms=0.565084Jy sigma=0.828534 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.82 mas, bmaj=11.32 mas, bpa=-9.85 degrees ! Estimated noise=7.57647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202866 Jy ! Component: 100 - total flux cleaned = 0.0236866 Jy ! Component: 150 - total flux cleaned = 0.0250565 Jy ! Component: 200 - total flux cleaned = 0.0254613 Jy ! Total flux subtracted in 200 components = 0.0254613 Jy ! Clean residual min=-0.082942 max=0.084922 Jy/beam ! Clean residual mean=-0.010867 rms=0.022352 Jy/beam ! Combined flux in latest and established models = 2.50466 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 161 components and 2.50466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.563193Jy sigma=0.831404 ! Fit after self-cal, rms=0.563120Jy sigma=0.830763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405131 Jy ! Component: 100 - total flux cleaned = 0.00405753 Jy ! Component: 150 - total flux cleaned = 0.00407105 Jy ! Component: 200 - total flux cleaned = 0.00407046 Jy ! Total flux subtracted in 200 components = 0.00407046 Jy ! Clean residual min=-0.082208 max=0.084528 Jy/beam ! Clean residual mean=-0.010954 rms=0.022190 Jy/beam ! Combined flux in latest and established models = 2.50873 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 165 components and 2.50873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562595Jy sigma=0.833391 ! Fit after self-cal, rms=0.562670Jy sigma=0.833242 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=6.736 mas, bpa=-22.57 degrees ! Estimated noise=5.83828 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 6.736 at -22.57 degrees (North through East) ! Clean map min=-0.054422 max=1.1233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562670Jy sigma=0.833242 ! Fit after self-cal, rms=0.561920Jy sigma=0.819869 ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=6.733 mas, bpa=-22.58 degrees ! Estimated noise=5.84801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00355355 Jy ! Component: 100 - total flux cleaned = -0.00214657 Jy ! Component: 150 - total flux cleaned = -0.000937443 Jy ! Component: 200 - total flux cleaned = -0.000228091 Jy ! Total flux subtracted in 200 components = -0.000228091 Jy ! Clean residual min=-0.056071 max=0.043982 Jy/beam ! Clean residual mean=-0.004427 rms=0.011764 Jy/beam ! Combined flux in latest and established models = 2.5085 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 171 components and 2.5085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561875Jy sigma=0.816536 ! Fit after self-cal, rms=0.561465Jy sigma=0.816276 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183954 Jy ! Component: 100 - total flux cleaned = -0.00152047 Jy ! Component: 150 - total flux cleaned = -0.00152562 Jy ! Component: 200 - total flux cleaned = -0.00125274 Jy ! Total flux subtracted in 200 components = -0.00125274 Jy ! Clean residual min=-0.055910 max=0.043121 Jy/beam ! Clean residual mean=-0.004417 rms=0.011745 Jy/beam ! Combined flux in latest and established models = 2.50725 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 178 components and 2.50725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561124Jy sigma=0.815363 ! Fit after self-cal, rms=0.561022Jy sigma=0.815265 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561022Jy sigma=0.815265 ! Fit after self-cal, rms=0.561020Jy sigma=0.815125 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=5.808 mas, bpa=-24.69 degrees ! Estimated noise=7.2364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.85892 Jy ! Component: 100 - total flux cleaned = 1.22793 Jy ! Component: 150 - total flux cleaned = 1.45715 Jy ! Component: 200 - total flux cleaned = 1.6246 Jy ! Total flux subtracted in 200 components = 1.6246 Jy ! Clean residual min=-0.058806 max=0.097975 Jy/beam ! Clean residual mean=-0.001286 rms=0.016554 Jy/beam ! Combined flux in latest and established models = 1.6246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 1.6246 Jy ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.732 mas, bpa=-22.59 degrees ! Estimated noise=5.84775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225869 Jy ! Component: 100 - total flux cleaned = 0.385448 Jy ! Component: 150 - total flux cleaned = 0.505079 Jy ! Component: 200 - total flux cleaned = 0.595782 Jy ! Total flux subtracted in 200 components = 0.595782 Jy ! Clean residual min=-0.053662 max=0.065944 Jy/beam ! Clean residual mean=-0.001767 rms=0.014953 Jy/beam ! Combined flux in latest and established models = 2.22038 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 113 components and 2.22038 Jy ! Inverting map ! Added new window around map position (-23, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0730244 Jy ! Component: 100 - total flux cleaned = 0.128696 Jy ! Component: 150 - total flux cleaned = 0.173355 Jy ! Component: 200 - total flux cleaned = 0.209355 Jy ! Total flux subtracted in 200 components = 0.209355 Jy ! Clean residual min=-0.053929 max=0.045451 Jy/beam ! Clean residual mean=-0.003715 rms=0.012142 Jy/beam ! Combined flux in latest and established models = 2.42973 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 141 components and 2.42973 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.793 mas, bmaj=11.31 mas, bpa=-9.95 degrees ! Estimated noise=7.62175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670776 Jy ! Component: 100 - total flux cleaned = 0.107636 Jy ! Component: 150 - total flux cleaned = 0.124195 Jy ! Component: 200 - total flux cleaned = 0.126012 Jy ! Total flux subtracted in 200 components = 0.126012 Jy ! Clean residual min=-0.080376 max=0.050854 Jy/beam ! Clean residual mean=-0.012059 rms=0.020345 Jy/beam ! Combined flux in latest and established models = 2.55575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162198 Jy ! Component: 100 - total flux cleaned = 0.00236545 Jy ! Component: 150 - total flux cleaned = 0.00307651 Jy ! Component: 200 - total flux cleaned = 0.00308023 Jy ! Total flux subtracted in 200 components = 0.00308023 Jy ! Clean residual min=-0.076882 max=0.050867 Jy/beam ! Clean residual mean=-0.012135 rms=0.019930 Jy/beam ! Combined flux in latest and established models = 2.55883 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 2.55883 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.732 mas, bpa=-22.59 degrees ! Estimated noise=5.84775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109913 Jy ! Component: 100 - total flux cleaned = -0.00935896 Jy ! Component: 150 - total flux cleaned = -0.0106406 Jy ! Component: 200 - total flux cleaned = -0.0118068 Jy ! Total flux subtracted in 200 components = -0.0118068 Jy ! Clean residual min=-0.050792 max=0.037132 Jy/beam ! Clean residual mean=-0.004808 rms=0.011021 Jy/beam ! Combined flux in latest and established models = 2.54702 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 177 components and 2.54702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555570Jy sigma=0.800530 ! Fit after self-cal, rms=0.554640Jy sigma=0.797860 wmodel /d2/scr/pima/rv101_uvs/J1230+1223_S_map.mod ! Writing 177 model components to file: /d2/scr/pima/rv101_uvs/J1230+1223_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1230+1223_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1230+1223_S_map.win ! wwins: Wrote 4 windows to /d2/scr/pima/rv101_uvs/J1230+1223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0234263 Jy ! Component: 100 - total flux cleaned = -0.044465 Jy ! Component: 150 - total flux cleaned = -0.0631988 Jy ! Component: 200 - total flux cleaned = -0.0778305 Jy ! Component: 250 - total flux cleaned = -0.091065 Jy ! Component: 300 - total flux cleaned = -0.101102 Jy ! Component: 350 - total flux cleaned = -0.11081 Jy ! Component: 400 - total flux cleaned = -0.120223 Jy ! Component: 450 - total flux cleaned = -0.12937 Jy ! Component: 500 - total flux cleaned = -0.137669 Jy ! Component: 550 - total flux cleaned = -0.146911 Jy ! Component: 600 - total flux cleaned = -0.154806 Jy ! Component: 650 - total flux cleaned = -0.16252 Jy ! Component: 700 - total flux cleaned = -0.169527 Jy ! Component: 750 - total flux cleaned = -0.175337 Jy ! Component: 800 - total flux cleaned = -0.181038 Jy ! Component: 850 - total flux cleaned = -0.186116 Jy ! Component: 900 - total flux cleaned = -0.190608 Jy ! Component: 950 - total flux cleaned = -0.196975 Jy ! Component: 1000 - total flux cleaned = -0.201778 Jy ! Component: 1050 - total flux cleaned = -0.207441 Jy ! Component: 1100 - total flux cleaned = -0.212081 Jy ! Component: 1150 - total flux cleaned = -0.216195 Jy ! Component: 1200 - total flux cleaned = -0.221582 Jy ! Component: 1250 - total flux cleaned = -0.225563 Jy ! Component: 1300 - total flux cleaned = -0.229917 Jy ! Component: 1350 - total flux cleaned = -0.234638 Jy ! Component: 1400 - total flux cleaned = -0.238455 Jy ! Component: 1450 - total flux cleaned = -0.24347 Jy ! Component: 1500 - total flux cleaned = -0.248005 Jy ! Component: 1550 - total flux cleaned = -0.252479 Jy ! Component: 1600 - total flux cleaned = -0.255693 Jy ! Component: 1650 - total flux cleaned = -0.258875 Jy ! Component: 1700 - total flux cleaned = -0.262794 Jy ! Component: 1750 - total flux cleaned = -0.266667 Jy ! Component: 1800 - total flux cleaned = -0.268964 Jy ! Component: 1850 - total flux cleaned = -0.271991 Jy ! Component: 1900 - total flux cleaned = -0.274613 Jy ! Component: 1950 - total flux cleaned = -0.277209 Jy ! Component: 2000 - total flux cleaned = -0.279776 Jy ! Component: 2050 - total flux cleaned = -0.282324 Jy ! Component: 2100 - total flux cleaned = -0.2852 Jy ! Component: 2150 - total flux cleaned = -0.286628 Jy ! Component: 2200 - total flux cleaned = -0.290157 Jy ! Component: 2250 - total flux cleaned = -0.291904 Jy ! Component: 2300 - total flux cleaned = -0.294324 Jy ! Component: 2350 - total flux cleaned = -0.296383 Jy ! Component: 2400 - total flux cleaned = -0.297745 Jy ! Component: 2450 - total flux cleaned = -0.301121 Jy ! Component: 2500 - total flux cleaned = -0.303122 Jy ! Component: 2550 - total flux cleaned = -0.304778 Jy ! Component: 2600 - total flux cleaned = -0.307081 Jy ! Component: 2650 - total flux cleaned = -0.309363 Jy ! Component: 2700 - total flux cleaned = -0.310658 Jy ! Component: 2750 - total flux cleaned = -0.313227 Jy ! Component: 2800 - total flux cleaned = -0.315454 Jy ! Component: 2850 - total flux cleaned = -0.317034 Jy ! Component: 2900 - total flux cleaned = -0.318604 Jy ! Component: 2950 - total flux cleaned = -0.320782 Jy ! Component: 3000 - total flux cleaned = -0.323252 Jy ! Component: 3050 - total flux cleaned = -0.323866 Jy ! Component: 3100 - total flux cleaned = -0.326302 Jy ! Component: 3150 - total flux cleaned = -0.328113 Jy ! Component: 3200 - total flux cleaned = -0.330512 Jy ! Component: 3250 - total flux cleaned = -0.331997 Jy ! Component: 3300 - total flux cleaned = -0.333475 Jy ! Component: 3350 - total flux cleaned = -0.335821 Jy ! Component: 3400 - total flux cleaned = -0.336984 Jy ! Component: 3450 - total flux cleaned = -0.339589 Jy ! Component: 3500 - total flux cleaned = -0.340737 Jy ! Component: 3550 - total flux cleaned = -0.342732 Jy ! Component: 3600 - total flux cleaned = -0.34415 Jy ! Component: 3650 - total flux cleaned = -0.345839 Jy ! Component: 3700 - total flux cleaned = -0.346959 Jy ! Component: 3750 - total flux cleaned = -0.348349 Jy ! Component: 3800 - total flux cleaned = -0.350557 Jy ! Component: 3850 - total flux cleaned = -0.351926 Jy ! Component: 3900 - total flux cleaned = -0.353288 Jy ! Component: 3950 - total flux cleaned = -0.354912 Jy ! Component: 4000 - total flux cleaned = -0.355987 Jy ! Component: 4050 - total flux cleaned = -0.357326 Jy ! Total flux subtracted in 4096 components = -0.358656 Jy ! Clean residual min=-0.016156 max=0.013808 Jy/beam ! Clean residual mean=-0.001466 rms=0.005105 Jy/beam ! Combined flux in latest and established models = 2.18836 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 534 components and 2.18836 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1230+1223_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 6.732 at -22.59 degrees (North through East) ! Clean map min=-0.036093 max=1.1491 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1230+1223_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.1491 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00510567 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33295 1.33295 2.66591 5.33182 10.6636 21.3273 42.6545 85.3091 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0153 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.149 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 225.063 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1230+1223_S_uvs.log closed on Sat Nov 29 13:53:38 2014