! Started logfile: /d2/scr/pima/rv101_uvs/J1215-1731_X_uvs.log on Sat Nov 29 16:33:55 2014 obs /d2/scr/pima/rv101_uvs/J1215-1731_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1215-1731_X_uva.fits ! AN table 1: 9 integrations on 28 of 28 possible baselines. ! AN table 2: 9 integrations on 15 of 15 possible baselines. ! AN table 3: 92 integrations on 1 of 1 possible baselines. ! AN table 4: 20 integrations on 3 of 3 possible baselines. ! AN table 5: 23 integrations on 6 of 6 possible baselines. ! AN table 6: 64 integrations on 3 of 3 possible baselines. ! AN table 7: 10 integrations on 36 of 36 possible baselines. ! AN table 8: 18 integrations on 36 of 36 possible baselines. ! AN table 9: 24 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.902001 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7032 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1215-1731_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 184 telescope corrections were flagged in sub-array 3. ! A total of 39 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! A total of 102 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 50 telescope corrections were flagged in sub-array 8. ! A total of 72 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 184 telescope corrections were flagged in sub-array 3. ! A total of 39 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! A total of 102 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 50 telescope corrections were flagged in sub-array 8. ! A total of 72 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 184 telescope corrections were flagged in sub-array 3. ! A total of 39 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! A total of 102 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 50 telescope corrections were flagged in sub-array 8. ! A total of 72 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 184 telescope corrections were flagged in sub-array 3. ! A total of 39 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! A total of 102 telescope corrections were flagged in sub-array 6. ! A total of 34 telescope corrections were flagged in sub-array 7. ! A total of 50 telescope corrections were flagged in sub-array 8. ! A total of 72 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.470523Jy sigma=7.702341 ! Fit after self-cal, rms=0.326622Jy sigma=1.512449 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.6853 mas, bmaj=2.171 mas, bpa=-8.031 degrees ! Estimated noise=2.59469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.694301 Jy ! Component: 100 - total flux cleaned = 0.892063 Jy ! Total flux subtracted in 100 components = 0.892063 Jy ! Clean residual min=-0.036001 max=0.085481 Jy/beam ! Clean residual mean=0.000373 rms=0.008376 Jy/beam ! Combined flux in latest and established models = 0.892063 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.892063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308411Jy sigma=1.399492 ! Fit after self-cal, rms=0.308190Jy sigma=1.398638 ! Inverting map ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925444 Jy ! Component: 100 - total flux cleaned = 0.140296 Jy ! Total flux subtracted in 100 components = 0.140296 Jy ! Clean residual min=-0.024840 max=0.064469 Jy/beam ! Clean residual mean=0.000276 rms=0.005878 Jy/beam ! Combined flux in latest and established models = 1.03236 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.03236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265943Jy sigma=1.112400 ! Fit after self-cal, rms=0.265536Jy sigma=1.110999 ! Inverting map ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (1.2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558895 Jy ! Component: 100 - total flux cleaned = 0.0851871 Jy ! Total flux subtracted in 100 components = 0.0851871 Jy ! Clean residual min=-0.021629 max=0.025986 Jy/beam ! Clean residual mean=0.000214 rms=0.004508 Jy/beam ! Combined flux in latest and established models = 1.11755 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 1.11755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248671Jy sigma=0.985806 ! Fit after self-cal, rms=0.247196Jy sigma=0.979291 ! Inverting map ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8003 mas, bmaj=2.434 mas, bpa=-8.544 degrees ! Estimated noise=2.10852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369586 Jy ! Component: 100 - total flux cleaned = 0.0583413 Jy ! Component: 150 - total flux cleaned = 0.0717943 Jy ! Component: 200 - total flux cleaned = 0.0787665 Jy ! Total flux subtracted in 200 components = 0.0787665 Jy ! Clean residual min=-0.020141 max=0.023014 Jy/beam ! Clean residual mean=0.001890 rms=0.004226 Jy/beam ! Combined flux in latest and established models = 1.19631 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 1.19631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239141Jy sigma=0.940340 ! Fit after self-cal, rms=0.238678Jy sigma=0.938192 ! Inverting map ! Your choice of large map pixels excluded 0.991% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8003 x 2.434 at -8.544 degrees (North through East) ! Clean map min=-0.018815 max=0.93382 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.00 LA 1.03 MK 0.99 ! NL 0.95 OV 0.97 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.15 KP 1.00* LA 1.19 MK 1.03 ! OV 0.95 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.06 ON 0.85 SC 1.00 WF 0.92 ! ! A total of 90 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! KP 0.00* PT 0.00* WF 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.04 LA 0.96 MK 1.02 ! NL 0.97 OV 0.97 PT 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.15 KP 1.00* LA 1.16 MK 0.98 ! OV 0.96 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* ON 1.00* SC 1.00* WF 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.99 HN 1.10 KP 1.00* LA 0.99 ! MA 1.12 NL 1.01 PT 0.91 SC 1.04 ! WF 0.85 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! KP 0.00* PT 0.00* WF 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.05 LA 1.04 MK 1.03 ! NL 1.01 OV 1.02 PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.13 ON 1.01 SC 0.97 WF 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.99 HN 1.09 KP 1.00* LA 1.10 ! NL 1.01 OV 1.04 PT 0.93 SC 0.98 ! WF 0.86 ! ! Telescope amplitude corrections in sub-array 9: ! KP 0.00* PT 0.00* WF 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.05 LA 1.01 MK 1.03 ! NL 1.00 OV 1.02 PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.06 ON 1.15 SC 1.03 WF 1.05 ! ! A total of 90 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.01 HN 1.07 KP 1.00* LA 1.06 ! NL 1.01 OV 1.02 PT 0.97 SC 1.00 ! WF 0.94 ! ! Telescope amplitude corrections in sub-array 9: ! KP 0.00* PT 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=0.238678Jy sigma=0.938192 ! Fit after self-cal, rms=0.189725Jy sigma=0.872352 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8527 mas, bmaj=2.454 mas, bpa=-8.04 degrees ! Estimated noise=2.09878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 12.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179503 Jy ! Component: 100 - total flux cleaned = 0.02833 Jy ! Component: 150 - total flux cleaned = 0.0358186 Jy ! Component: 200 - total flux cleaned = 0.0417515 Jy ! Total flux subtracted in 200 components = 0.0417515 Jy ! Clean residual min=-0.010966 max=0.014906 Jy/beam ! Clean residual mean=0.001628 rms=0.002910 Jy/beam ! Combined flux in latest and established models = 1.23806 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 68 components and 1.23806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187158Jy sigma=0.860842 ! Fit after self-cal, rms=0.187026Jy sigma=0.859752 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187026Jy sigma=0.859752 ! Fit after self-cal, rms=0.185462Jy sigma=0.854974 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8545 mas, bmaj=2.452 mas, bpa=-8.079 degrees ! Estimated noise=2.10148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724895 Jy ! Component: 100 - total flux cleaned = 0.0108289 Jy ! Component: 150 - total flux cleaned = 0.0128011 Jy ! Component: 200 - total flux cleaned = 0.0132823 Jy ! Total flux subtracted in 200 components = 0.0132823 Jy ! Clean residual min=-0.010980 max=0.013684 Jy/beam ! Clean residual mean=0.001497 rms=0.002803 Jy/beam ! Combined flux in latest and established models = 1.25135 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 1.25135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184856Jy sigma=0.852778 ! Fit after self-cal, rms=0.184817Jy sigma=0.852643 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, -39.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125239 Jy ! Component: 100 - total flux cleaned = 0.0188601 Jy ! Component: 150 - total flux cleaned = 0.0222185 Jy ! Component: 200 - total flux cleaned = 0.0253447 Jy ! Total flux subtracted in 200 components = 0.0253447 Jy ! Clean residual min=-0.010599 max=0.014267 Jy/beam ! Clean residual mean=0.001338 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 1.27669 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 1.27669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183413Jy sigma=0.847023 ! Fit after self-cal, rms=0.183369Jy sigma=0.846643 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (0, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124697 Jy ! Component: 100 - total flux cleaned = 0.0157968 Jy ! Component: 150 - total flux cleaned = 0.0194059 Jy ! Component: 200 - total flux cleaned = 0.0222685 Jy ! Total flux subtracted in 200 components = 0.0222685 Jy ! Clean residual min=-0.009929 max=0.011923 Jy/beam ! Clean residual mean=0.001193 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 1.29896 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 1.29896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182113Jy sigma=0.840649 ! Fit after self-cal, rms=0.181986Jy sigma=0.839968 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (-13.2, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106685 Jy ! Component: 100 - total flux cleaned = 0.0170089 Jy ! Component: 150 - total flux cleaned = 0.0200877 Jy ! Component: 200 - total flux cleaned = 0.0232925 Jy ! Total flux subtracted in 200 components = 0.0232925 Jy ! Clean residual min=-0.010078 max=0.010730 Jy/beam ! Clean residual mean=0.001022 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 1.32225 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 1.32225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180795Jy sigma=0.835563 ! Fit after self-cal, rms=0.180670Jy sigma=0.835043 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (-39, -50.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088871 Jy ! Component: 100 - total flux cleaned = 0.0127794 Jy ! Component: 150 - total flux cleaned = 0.0159142 Jy ! Component: 200 - total flux cleaned = 0.0177867 Jy ! Total flux subtracted in 200 components = 0.0177867 Jy ! Clean residual min=-0.009493 max=0.009713 Jy/beam ! Clean residual mean=0.000907 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 1.34004 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 159 components and 1.34004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179846Jy sigma=0.831744 ! Fit after self-cal, rms=0.179732Jy sigma=0.831474 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179732Jy sigma=0.831474 ! Fit after self-cal, rms=0.174572Jy sigma=0.814545 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8549 mas, bmaj=2.453 mas, bpa=-8.121 degrees ! Estimated noise=2.09786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017309 Jy ! Component: 100 - total flux cleaned = -0.00155133 Jy ! Component: 150 - total flux cleaned = -0.00122873 Jy ! Component: 200 - total flux cleaned = -0.000326954 Jy ! Total flux subtracted in 200 components = -0.000326954 Jy ! Clean residual min=-0.007658 max=0.009195 Jy/beam ! Clean residual mean=0.000715 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 1.33971 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 182 components and 1.33971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174230Jy sigma=0.812418 ! Fit after self-cal, rms=0.174209Jy sigma=0.812350 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, 49.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671828 Jy ! Component: 100 - total flux cleaned = 0.0078718 Jy ! Component: 150 - total flux cleaned = 0.00891196 Jy ! Component: 200 - total flux cleaned = 0.00973605 Jy ! Total flux subtracted in 200 components = 0.00973605 Jy ! Clean residual min=-0.007232 max=0.008406 Jy/beam ! Clean residual mean=0.000649 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 1.34945 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 197 components and 1.34945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173668Jy sigma=0.810001 ! Fit after self-cal, rms=0.173681Jy sigma=0.809823 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173681Jy sigma=0.809823 ! Fit after self-cal, rms=0.173005Jy sigma=0.802113 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=1.877 mas, bmaj=3.571 mas, bpa=-11.32 degrees ! Estimated noise=2.69913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498224 Jy ! Component: 100 - total flux cleaned = 0.00568916 Jy ! Component: 150 - total flux cleaned = 0.00629355 Jy ! Component: 200 - total flux cleaned = 0.00712188 Jy ! Total flux subtracted in 200 components = 0.00712188 Jy ! Clean residual min=-0.006583 max=0.010525 Jy/beam ! Clean residual mean=0.001460 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 1.35657 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 211 components and 1.35657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172810Jy sigma=0.801494 ! Fit after self-cal, rms=0.172781Jy sigma=0.801402 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826814 Jy ! Component: 100 - total flux cleaned = 0.00132056 Jy ! Component: 150 - total flux cleaned = 0.00202194 Jy ! Component: 200 - total flux cleaned = 0.00245918 Jy ! Total flux subtracted in 200 components = 0.00245918 Jy ! Clean residual min=-0.006838 max=0.010330 Jy/beam ! Clean residual mean=0.001426 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 1.35903 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 223 components and 1.35903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172687Jy sigma=0.801121 ! Fit after self-cal, rms=0.172670Jy sigma=0.801087 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8551 mas, bmaj=2.453 mas, bpa=-8.138 degrees ! Estimated noise=2.09907 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 2.453 at -8.138 degrees (North through East) ! Clean map min=-0.0059483 max=0.93908 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172670Jy sigma=0.801087 ! Fit after self-cal, rms=0.166524Jy sigma=0.748574 ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8547 mas, bmaj=2.454 mas, bpa=-8.136 degrees ! Estimated noise=2.09819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136254 Jy ! Component: 100 - total flux cleaned = 0.000983862 Jy ! Component: 150 - total flux cleaned = 0.00152531 Jy ! Component: 200 - total flux cleaned = 0.00192804 Jy ! Total flux subtracted in 200 components = 0.00192804 Jy ! Clean residual min=-0.006211 max=0.007165 Jy/beam ! Clean residual mean=0.000647 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 1.36096 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 245 components and 1.36096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166330Jy sigma=0.747632 ! Fit after self-cal, rms=0.166322Jy sigma=0.747605 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (43.6, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570633 Jy ! Component: 100 - total flux cleaned = 0.00717557 Jy ! Component: 150 - total flux cleaned = 0.00847023 Jy ! Component: 200 - total flux cleaned = 0.00927505 Jy ! Total flux subtracted in 200 components = 0.00927505 Jy ! Clean residual min=-0.006446 max=0.007022 Jy/beam ! Clean residual mean=0.000635 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 1.37023 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 265 components and 1.37023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166021Jy sigma=0.746143 ! Fit after self-cal, rms=0.166010Jy sigma=0.746021 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166010Jy sigma=0.746021 ! Fit after self-cal, rms=0.165507Jy sigma=0.744127 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.709 mas, bmaj=2.192 mas, bpa=-7.582 degrees ! Estimated noise=2.66818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.69957 Jy ! Component: 100 - total flux cleaned = 0.897643 Jy ! Component: 150 - total flux cleaned = 0.996489 Jy ! Component: 200 - total flux cleaned = 1.05847 Jy ! Total flux subtracted in 200 components = 1.05847 Jy ! Clean residual min=-0.018503 max=0.032748 Jy/beam ! Clean residual mean=0.000257 rms=0.004435 Jy/beam ! Combined flux in latest and established models = 1.05847 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.05847 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8547 mas, bmaj=2.454 mas, bpa=-8.138 degrees ! Estimated noise=2.09803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590762 Jy ! Component: 100 - total flux cleaned = 0.0944601 Jy ! Component: 150 - total flux cleaned = 0.119924 Jy ! Component: 200 - total flux cleaned = 0.140088 Jy ! Total flux subtracted in 200 components = 0.140088 Jy ! Clean residual min=-0.007840 max=0.016521 Jy/beam ! Clean residual mean=0.001760 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 1.19856 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 1.19856 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (1.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178653 Jy ! Component: 100 - total flux cleaned = 0.0321613 Jy ! Component: 150 - total flux cleaned = 0.0445883 Jy ! Component: 200 - total flux cleaned = 0.055641 Jy ! Total flux subtracted in 200 components = 0.055641 Jy ! Clean residual min=-0.006667 max=0.011031 Jy/beam ! Clean residual mean=0.001373 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 1.2542 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 74 components and 1.2542 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (1.6, 20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111592 Jy ! Component: 100 - total flux cleaned = 0.0203461 Jy ! Component: 150 - total flux cleaned = 0.028747 Jy ! Component: 200 - total flux cleaned = 0.0365136 Jy ! Total flux subtracted in 200 components = 0.0365136 Jy ! Clean residual min=-0.006106 max=0.008913 Jy/beam ! Clean residual mean=0.001134 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 1.29071 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 100 components and 1.29071 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (-0.2, -25.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884117 Jy ! Component: 100 - total flux cleaned = 0.0159048 Jy ! Component: 150 - total flux cleaned = 0.0224626 Jy ! Component: 200 - total flux cleaned = 0.0286058 Jy ! Total flux subtracted in 200 components = 0.0286058 Jy ! Clean residual min=-0.005723 max=0.008143 Jy/beam ! Clean residual mean=0.000951 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 1.31932 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 119 components and 1.31932 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (28.6, -40.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739479 Jy ! Component: 100 - total flux cleaned = 0.0128201 Jy ! Component: 150 - total flux cleaned = 0.0172873 Jy ! Component: 200 - total flux cleaned = 0.0215304 Jy ! Total flux subtracted in 200 components = 0.0215304 Jy ! Clean residual min=-0.005569 max=0.007242 Jy/beam ! Clean residual mean=0.000834 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 1.34085 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 143 components and 1.34085 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (17.8, 35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655393 Jy ! Component: 100 - total flux cleaned = 0.0108162 Jy ! Component: 150 - total flux cleaned = 0.0140932 Jy ! Component: 200 - total flux cleaned = 0.0170524 Jy ! Total flux subtracted in 200 components = 0.0170524 Jy ! Clean residual min=-0.005872 max=0.006873 Jy/beam ! Clean residual mean=0.000723 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 1.3579 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 172 components and 1.3579 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (28.2, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586562 Jy ! Component: 100 - total flux cleaned = 0.00946118 Jy ! Component: 150 - total flux cleaned = 0.0123646 Jy ! Component: 200 - total flux cleaned = 0.0151355 Jy ! Total flux subtracted in 200 components = 0.0151355 Jy ! Clean residual min=-0.005905 max=0.006640 Jy/beam ! Clean residual mean=0.000642 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 1.37304 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 193 components and 1.37304 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Added new window around map position (7.4, 38.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619844 Jy ! Component: 100 - total flux cleaned = 0.00928771 Jy ! Component: 150 - total flux cleaned = 0.011675 Jy ! Component: 200 - total flux cleaned = 0.0139467 Jy ! Total flux subtracted in 200 components = 0.0139467 Jy ! Clean residual min=-0.005685 max=0.005835 Jy/beam ! Clean residual mean=0.000545 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 1.38698 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 224 components and 1.38698 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=1.877 mas, bmaj=3.573 mas, bpa=-11.33 degrees ! Estimated noise=2.69612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517175 Jy ! Component: 100 - total flux cleaned = 0.00900018 Jy ! Component: 150 - total flux cleaned = 0.0119785 Jy ! Component: 200 - total flux cleaned = 0.0149987 Jy ! Total flux subtracted in 200 components = 0.0149987 Jy ! Clean residual min=-0.005859 max=0.007372 Jy/beam ! Clean residual mean=0.001045 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 1.40198 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253672 Jy ! Component: 100 - total flux cleaned = 0.00479075 Jy ! Component: 150 - total flux cleaned = 0.00644831 Jy ! Component: 200 - total flux cleaned = 0.00791262 Jy ! Total flux subtracted in 200 components = 0.00791262 Jy ! Clean residual min=-0.005876 max=0.007239 Jy/beam ! Clean residual mean=0.000930 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 1.40989 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 280 components and 1.40989 Jy ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! Estimated beam: bmin=0.8547 mas, bmaj=2.454 mas, bpa=-8.138 degrees ! Estimated noise=2.09803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283135 Jy ! Component: 100 - total flux cleaned = 0.000565081 Jy ! Component: 150 - total flux cleaned = 0.00126443 Jy ! Component: 200 - total flux cleaned = 0.00216061 Jy ! Total flux subtracted in 200 components = 0.00216061 Jy ! Clean residual min=-0.005630 max=0.005499 Jy/beam ! Clean residual mean=0.000386 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 1.41205 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 305 components and 1.41205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164188Jy sigma=0.736416 ! Fit after self-cal, rms=0.164112Jy sigma=0.735641 wmodel /d2/scr/pima/rv101_uvs/J1215-1731_X_map.mod ! Writing 305 model components to file: /d2/scr/pima/rv101_uvs/J1215-1731_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1215-1731_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1215-1731_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1215-1731_X_map.win ! wwins: Wrote 16 windows to /d2/scr/pima/rv101_uvs/J1215-1731_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644385 Jy ! Component: 100 - total flux cleaned = 0.0011277 Jy ! Component: 150 - total flux cleaned = 0.0018722 Jy ! Component: 200 - total flux cleaned = 0.00277391 Jy ! Component: 250 - total flux cleaned = 0.00338853 Jy ! Component: 300 - total flux cleaned = 0.00407608 Jy ! Component: 350 - total flux cleaned = 0.00483126 Jy ! Component: 400 - total flux cleaned = 0.00557011 Jy ! Component: 450 - total flux cleaned = 0.00629732 Jy ! Component: 500 - total flux cleaned = 0.00716987 Jy ! Component: 550 - total flux cleaned = 0.00802592 Jy ! Component: 600 - total flux cleaned = 0.00879134 Jy ! Component: 650 - total flux cleaned = 0.00962185 Jy ! Component: 700 - total flux cleaned = 0.0105871 Jy ! Component: 750 - total flux cleaned = 0.0113915 Jy ! Component: 800 - total flux cleaned = 0.0121138 Jy ! Component: 850 - total flux cleaned = 0.0127546 Jy ! Component: 900 - total flux cleaned = 0.0133175 Jy ! Component: 950 - total flux cleaned = 0.0140143 Jy ! Component: 1000 - total flux cleaned = 0.0148396 Jy ! Component: 1050 - total flux cleaned = 0.0155879 Jy ! Component: 1100 - total flux cleaned = 0.0164617 Jy ! Component: 1150 - total flux cleaned = 0.0171257 Jy ! Component: 1200 - total flux cleaned = 0.0177181 Jy ! Component: 1250 - total flux cleaned = 0.0184999 Jy ! Component: 1300 - total flux cleaned = 0.0192735 Jy ! Component: 1350 - total flux cleaned = 0.0198494 Jy ! Component: 1400 - total flux cleaned = 0.0206082 Jy ! Component: 1450 - total flux cleaned = 0.0211723 Jy ! Component: 1500 - total flux cleaned = 0.0217933 Jy ! Component: 1550 - total flux cleaned = 0.0222864 Jy ! Component: 1600 - total flux cleaned = 0.0232018 Jy ! Component: 1650 - total flux cleaned = 0.0236846 Jy ! Component: 1700 - total flux cleaned = 0.0242838 Jy ! Component: 1750 - total flux cleaned = 0.0248788 Jy ! Component: 1800 - total flux cleaned = 0.0255864 Jy ! Component: 1850 - total flux cleaned = 0.0261128 Jy ! Component: 1900 - total flux cleaned = 0.0268093 Jy ! Component: 1950 - total flux cleaned = 0.0274425 Jy ! Component: 2000 - total flux cleaned = 0.0280707 Jy ! Component: 2050 - total flux cleaned = 0.028807 Jy ! Component: 2100 - total flux cleaned = 0.0292566 Jy ! Component: 2150 - total flux cleaned = 0.0299262 Jy ! Component: 2200 - total flux cleaned = 0.0304251 Jy ! Component: 2250 - total flux cleaned = 0.0310311 Jy ! Component: 2300 - total flux cleaned = 0.0315771 Jy ! Component: 2350 - total flux cleaned = 0.0321199 Jy ! Component: 2400 - total flux cleaned = 0.0326054 Jy ! Component: 2450 - total flux cleaned = 0.0331414 Jy ! Component: 2500 - total flux cleaned = 0.0335674 Jy ! Component: 2550 - total flux cleaned = 0.0340437 Jy ! Component: 2600 - total flux cleaned = 0.0345694 Jy ! Component: 2650 - total flux cleaned = 0.0350919 Jy ! Component: 2700 - total flux cleaned = 0.0354549 Jy ! Component: 2750 - total flux cleaned = 0.0359707 Jy ! Component: 2800 - total flux cleaned = 0.0363805 Jy ! Component: 2850 - total flux cleaned = 0.0367371 Jy ! Component: 2900 - total flux cleaned = 0.0372938 Jy ! Component: 2950 - total flux cleaned = 0.0376463 Jy ! Component: 3000 - total flux cleaned = 0.0382964 Jy ! Component: 3050 - total flux cleaned = 0.0385447 Jy ! Component: 3100 - total flux cleaned = 0.0390881 Jy ! Component: 3150 - total flux cleaned = 0.0393829 Jy ! Component: 3200 - total flux cleaned = 0.0398227 Jy ! Component: 3250 - total flux cleaned = 0.0403087 Jy ! Component: 3300 - total flux cleaned = 0.0407437 Jy ! Component: 3350 - total flux cleaned = 0.041032 Jy ! Component: 3400 - total flux cleaned = 0.0416529 Jy ! Component: 3450 - total flux cleaned = 0.04208 Jy ! Component: 3500 - total flux cleaned = 0.0424106 Jy ! Component: 3550 - total flux cleaned = 0.0428334 Jy ! Component: 3600 - total flux cleaned = 0.0430203 Jy ! Component: 3650 - total flux cleaned = 0.043578 Jy ! Component: 3700 - total flux cleaned = 0.0437163 Jy ! Component: 3750 - total flux cleaned = 0.0440839 Jy ! Component: 3800 - total flux cleaned = 0.0444497 Jy ! Component: 3850 - total flux cleaned = 0.0449044 Jy ! Component: 3900 - total flux cleaned = 0.0452209 Jy ! Component: 3950 - total flux cleaned = 0.0455356 Jy ! Component: 4000 - total flux cleaned = 0.0458937 Jy ! Component: 4050 - total flux cleaned = 0.0462944 Jy ! Total flux subtracted in 4096 components = 0.0464717 Jy ! Clean residual min=-0.002574 max=0.002672 Jy/beam ! Clean residual mean=0.000164 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 1.45853 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 631 components and 1.45852 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1215-1731_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8547 x 2.454 at -8.138 degrees (North through East) ! Clean map min=-0.0039703 max=0.93481 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1215-1731_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.934811 invert ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1921 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000777786 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.249607 0.249607 0.499215 0.998429 1.99686 3.99372 7.98743 15.9749 31.9497 63.8995 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.934 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1201.89 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1215-1731_X_uvs.log closed on Sat Nov 29 16:34:02 2014