! Started logfile: /d2/scr/pima/rv101_uvs/J1146-3328_S_uvs.log on Sat Nov 29 13:53:13 2014 obs /d2/scr/pima/rv101_uvs/J1146-3328_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1146-3328_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.971243 visibilities/baseline/integration-bin. ! Found source: J1146-3328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4188 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1146-3328_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019852Jy sigma=10.554109 ! Fit after self-cal, rms=0.862301Jy sigma=8.867141 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=6.368 mas, bpa=-6.145 degrees ! Estimated noise=1.76706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104753 Jy ! Component: 100 - total flux cleaned = 0.133983 Jy ! Total flux subtracted in 100 components = 0.133983 Jy ! Clean residual min=-0.009882 max=0.014514 Jy/beam ! Clean residual mean=-0.000080 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.133983 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.133983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102904Jy sigma=0.948932 ! Fit after self-cal, rms=0.102738Jy sigma=0.947363 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.447 mas, bpa=-4.674 degrees ! Estimated noise=1.11056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205666 Jy ! Component: 100 - total flux cleaned = 0.0300734 Jy ! Component: 150 - total flux cleaned = 0.0351638 Jy ! Component: 200 - total flux cleaned = 0.0380254 Jy ! Total flux subtracted in 200 components = 0.0380254 Jy ! Clean residual min=-0.005971 max=0.008317 Jy/beam ! Clean residual mean=-0.000017 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.172009 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.172009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099133Jy sigma=0.900656 ! Fit after self-cal, rms=0.099098Jy sigma=0.899835 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.724 x 7.447 at -4.674 degrees (North through East) ! Clean map min=-0.0057411 max=0.13461 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.099098Jy sigma=0.899835 ! Fit after self-cal, rms=0.099098Jy sigma=0.899835 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.447 mas, bpa=-4.674 degrees ! Estimated noise=1.11056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114976 Jy ! Component: 100 - total flux cleaned = 0.00129216 Jy ! Component: 150 - total flux cleaned = 0.00142073 Jy ! Component: 200 - total flux cleaned = 0.00154171 Jy ! Total flux subtracted in 200 components = 0.00154171 Jy ! Clean residual min=-0.005794 max=0.008104 Jy/beam ! Clean residual mean=-0.000012 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.17355 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.17355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098992Jy sigma=0.898834 ! Fit after self-cal, rms=0.098987Jy sigma=0.898753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098987Jy sigma=0.898753 ! Fit after self-cal, rms=0.098927Jy sigma=0.895626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=7.5 mas, bpa=-4.935 degrees ! Estimated noise=1.10297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196909 Jy ! Component: 100 - total flux cleaned = -0.00209351 Jy ! Component: 150 - total flux cleaned = -0.00214743 Jy ! Component: 200 - total flux cleaned = -0.00209831 Jy ! Total flux subtracted in 200 components = -0.00209831 Jy ! Clean residual min=-0.005409 max=0.007360 Jy/beam ! Clean residual mean=-0.000006 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.171452 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.171452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098837Jy sigma=0.894956 ! Fit after self-cal, rms=0.098871Jy sigma=0.894827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054852 Jy ! Component: 100 - total flux cleaned = 0.00649 Jy ! Component: 150 - total flux cleaned = 0.00721416 Jy ! Component: 200 - total flux cleaned = 0.00730606 Jy ! Total flux subtracted in 200 components = 0.00730606 Jy ! Clean residual min=-0.006114 max=0.006017 Jy/beam ! Clean residual mean=0.000023 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.178758 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.178758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098379Jy sigma=0.890247 ! Fit after self-cal, rms=0.098366Jy sigma=0.889286 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098366Jy sigma=0.889286 ! Fit after self-cal, rms=0.099530Jy sigma=0.883695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.485 mas, bpa=-4.895 degrees ! Estimated noise=1.11484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266387 Jy ! Component: 100 - total flux cleaned = 0.00355691 Jy ! Component: 150 - total flux cleaned = 0.00411275 Jy ! Component: 200 - total flux cleaned = 0.00442109 Jy ! Total flux subtracted in 200 components = 0.00442109 Jy ! Clean residual min=-0.004529 max=0.005289 Jy/beam ! Clean residual mean=-0.000018 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.183179 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.183179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099387Jy sigma=0.882667 ! Fit after self-cal, rms=0.099432Jy sigma=0.882466 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736269 Jy ! Component: 100 - total flux cleaned = 0.000903855 Jy ! Component: 150 - total flux cleaned = 0.0010098 Jy ! Component: 200 - total flux cleaned = 0.00105979 Jy ! Total flux subtracted in 200 components = 0.00105979 Jy ! Clean residual min=-0.004433 max=0.005019 Jy/beam ! Clean residual mean=-0.000013 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.184239 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.184239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099369Jy sigma=0.881995 ! Fit after self-cal, rms=0.099380Jy sigma=0.881981 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099380Jy sigma=0.881981 ! Fit after self-cal, rms=0.098174Jy sigma=0.879317 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=20.89 mas, bpa=1.081 degrees ! Estimated noise=1.49097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228874 Jy ! Component: 100 - total flux cleaned = 0.00271741 Jy ! Component: 150 - total flux cleaned = 0.00288788 Jy ! Component: 200 - total flux cleaned = 0.0029632 Jy ! Total flux subtracted in 200 components = 0.0029632 Jy ! Clean residual min=-0.005510 max=0.005369 Jy/beam ! Clean residual mean=-0.000023 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.187202 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.187202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098168Jy sigma=0.879256 ! Fit after self-cal, rms=0.098152Jy sigma=0.879050 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216333 Jy ! Component: 100 - total flux cleaned = 0.00029083 Jy ! Component: 150 - total flux cleaned = 0.000326601 Jy ! Component: 200 - total flux cleaned = 0.000428034 Jy ! Total flux subtracted in 200 components = 0.000428034 Jy ! Clean residual min=-0.005406 max=0.005486 Jy/beam ! Clean residual mean=-0.000019 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.18763 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.18763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098148Jy sigma=0.878948 ! Fit after self-cal, rms=0.098155Jy sigma=0.878937 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=7.494 mas, bpa=-4.75 degrees ! Estimated noise=1.1146 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.713 x 7.494 at -4.75 degrees (North through East) ! Clean map min=-0.0048173 max=0.12997 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=6.438 mas, bpa=-6.06 degrees ! Estimated noise=1.76225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104177 Jy ! Component: 100 - total flux cleaned = 0.13383 Jy ! Component: 150 - total flux cleaned = 0.14941 Jy ! Component: 200 - total flux cleaned = 0.157656 Jy ! Total flux subtracted in 200 components = 0.157656 Jy ! Clean residual min=-0.008479 max=0.008932 Jy/beam ! Clean residual mean=-0.000059 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.157656 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.157656 Jy ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=7.494 mas, bpa=-4.75 degrees ! Estimated noise=1.1146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011969 Jy ! Component: 100 - total flux cleaned = 0.019241 Jy ! Component: 150 - total flux cleaned = 0.02422 Jy ! Component: 200 - total flux cleaned = 0.0272273 Jy ! Total flux subtracted in 200 components = 0.0272273 Jy ! Clean residual min=-0.004512 max=0.005308 Jy/beam ! Clean residual mean=-0.000018 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.184884 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.184884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=20.89 mas, bpa=1.081 degrees ! Estimated noise=1.49097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342133 Jy ! Component: 100 - total flux cleaned = 0.00401021 Jy ! Component: 150 - total flux cleaned = 0.00439148 Jy ! Component: 200 - total flux cleaned = 0.0045481 Jy ! Total flux subtracted in 200 components = 0.0045481 Jy ! Clean residual min=-0.005105 max=0.005612 Jy/beam ! Clean residual mean=-0.000002 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.189432 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.24266e-05 Jy ! Component: 100 - total flux cleaned = -4.21493e-05 Jy ! Component: 150 - total flux cleaned = -7.98348e-05 Jy ! Component: 200 - total flux cleaned = -0.000111603 Jy ! Total flux subtracted in 200 components = -0.000111603 Jy ! Clean residual min=-0.005027 max=0.005649 Jy/beam ! Clean residual mean=-0.000002 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.18932 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.18932 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=7.494 mas, bpa=-4.75 degrees ! Estimated noise=1.1146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00092677 Jy ! Component: 100 - total flux cleaned = -0.000929548 Jy ! Component: 150 - total flux cleaned = -0.000854972 Jy ! Component: 200 - total flux cleaned = -0.000854382 Jy ! Total flux subtracted in 200 components = -0.000854382 Jy ! Clean residual min=-0.004031 max=0.004682 Jy/beam ! Clean residual mean=-0.000004 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.188466 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.188466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098017Jy sigma=0.877864 ! Fit after self-cal, rms=0.097997Jy sigma=0.877594 wmodel /d2/scr/pima/rv101_uvs/J1146-3328_S_map.mod ! Writing 78 model components to file: /d2/scr/pima/rv101_uvs/J1146-3328_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1146-3328_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1146-3328_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1146-3328_S_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J1146-3328_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217371 Jy ! Component: 100 - total flux cleaned = 0.00272476 Jy ! Component: 150 - total flux cleaned = 0.00301525 Jy ! Component: 200 - total flux cleaned = 0.00356835 Jy ! Component: 250 - total flux cleaned = 0.00416211 Jy ! Component: 300 - total flux cleaned = 0.00466939 Jy ! Component: 350 - total flux cleaned = 0.00522124 Jy ! Component: 400 - total flux cleaned = 0.00557774 Jy ! Component: 450 - total flux cleaned = 0.00592332 Jy ! Component: 500 - total flux cleaned = 0.00614721 Jy ! Component: 550 - total flux cleaned = 0.00636511 Jy ! Component: 600 - total flux cleaned = 0.00641895 Jy ! Component: 650 - total flux cleaned = 0.00657478 Jy ! Component: 700 - total flux cleaned = 0.00662599 Jy ! Component: 750 - total flux cleaned = 0.00682417 Jy ! Component: 800 - total flux cleaned = 0.00696968 Jy ! Component: 850 - total flux cleaned = 0.00715988 Jy ! Component: 900 - total flux cleaned = 0.00743724 Jy ! Component: 950 - total flux cleaned = 0.007665 Jy ! Component: 1000 - total flux cleaned = 0.00806558 Jy ! Component: 1050 - total flux cleaned = 0.00832706 Jy ! Component: 1100 - total flux cleaned = 0.0086268 Jy ! Component: 1150 - total flux cleaned = 0.00875232 Jy ! Component: 1200 - total flux cleaned = 0.0088762 Jy ! Component: 1250 - total flux cleaned = 0.00904002 Jy ! Component: 1300 - total flux cleaned = 0.00928067 Jy ! Component: 1350 - total flux cleaned = 0.00943817 Jy ! Component: 1400 - total flux cleaned = 0.0097091 Jy ! Component: 1450 - total flux cleaned = 0.00986131 Jy ! Component: 1500 - total flux cleaned = 0.0100492 Jy ! Component: 1550 - total flux cleaned = 0.010346 Jy ! Component: 1600 - total flux cleaned = 0.0105651 Jy ! Component: 1650 - total flux cleaned = 0.0107457 Jy ! Component: 1700 - total flux cleaned = 0.0108525 Jy ! Component: 1750 - total flux cleaned = 0.0109237 Jy ! Component: 1800 - total flux cleaned = 0.0110984 Jy ! Component: 1850 - total flux cleaned = 0.0111674 Jy ! Component: 1900 - total flux cleaned = 0.0113043 Jy ! Component: 1950 - total flux cleaned = 0.011305 Jy ! Component: 2000 - total flux cleaned = 0.0113719 Jy ! Component: 2050 - total flux cleaned = 0.0114379 Jy ! Component: 2100 - total flux cleaned = 0.0114378 Jy ! Component: 2150 - total flux cleaned = 0.0115351 Jy ! Component: 2200 - total flux cleaned = 0.0114393 Jy ! Component: 2250 - total flux cleaned = 0.0115977 Jy ! Component: 2300 - total flux cleaned = 0.0116918 Jy ! Component: 2350 - total flux cleaned = 0.0117224 Jy ! Component: 2400 - total flux cleaned = 0.0117228 Jy ! Component: 2450 - total flux cleaned = 0.0117836 Jy ! Component: 2500 - total flux cleaned = 0.0119046 Jy ! Component: 2550 - total flux cleaned = 0.0119046 Jy ! Component: 2600 - total flux cleaned = 0.0121126 Jy ! Component: 2650 - total flux cleaned = 0.0120832 Jy ! Component: 2700 - total flux cleaned = 0.012229 Jy ! Component: 2750 - total flux cleaned = 0.0122577 Jy ! Component: 2800 - total flux cleaned = 0.0122865 Jy ! Component: 2850 - total flux cleaned = 0.0124286 Jy ! Component: 2900 - total flux cleaned = 0.012429 Jy ! Component: 2950 - total flux cleaned = 0.0125684 Jy ! Component: 3000 - total flux cleaned = 0.0127069 Jy ! Component: 3050 - total flux cleaned = 0.0127347 Jy ! Component: 3100 - total flux cleaned = 0.0128442 Jy ! Component: 3150 - total flux cleaned = 0.0130336 Jy ! Component: 3200 - total flux cleaned = 0.013034 Jy ! Component: 3250 - total flux cleaned = 0.0131407 Jy ! Component: 3300 - total flux cleaned = 0.0132199 Jy ! Component: 3350 - total flux cleaned = 0.0132722 Jy ! Component: 3400 - total flux cleaned = 0.0132462 Jy ! Component: 3450 - total flux cleaned = 0.0134015 Jy ! Component: 3500 - total flux cleaned = 0.0134014 Jy ! Component: 3550 - total flux cleaned = 0.0135031 Jy ! Component: 3600 - total flux cleaned = 0.0136039 Jy ! Component: 3650 - total flux cleaned = 0.0135285 Jy ! Component: 3700 - total flux cleaned = 0.013653 Jy ! Component: 3750 - total flux cleaned = 0.0137272 Jy ! Component: 3800 - total flux cleaned = 0.0136781 Jy ! Component: 3850 - total flux cleaned = 0.0137513 Jy ! Component: 3900 - total flux cleaned = 0.0137994 Jy ! Component: 3950 - total flux cleaned = 0.0137515 Jy ! Component: 4000 - total flux cleaned = 0.0137993 Jy ! Component: 4050 - total flux cleaned = 0.0138705 Jy ! Total flux subtracted in 4096 components = 0.0138941 Jy ! Clean residual min=-0.001375 max=0.001210 Jy/beam ! Clean residual mean=-0.000004 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.20236 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 338 components and 0.20236 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1146-3328_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.713 x 7.494 at -4.75 degrees (North through East) ! Clean map min=-0.0032951 max=0.13147 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1146-3328_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000419878 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.958109 0.958109 1.91622 3.83243 7.66487 15.3297 30.6595 61.319 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.131 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 313.116 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1146-3328_S_uvs.log closed on Sat Nov 29 13:53:18 2014