! Started logfile: /d2/scr/pima/rv101_uvs/J1146+3958_X_uvs.log on Sat Nov 29 16:33:31 2014 obs /d2/scr/pima/rv101_uvs/J1146+3958_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_X_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! AN table 2: 9 integrations on 6 of 6 possible baselines. ! AN table 3: 15 integrations on 6 of 6 possible baselines. ! AN table 4: 9 integrations on 21 of 21 possible baselines. ! AN table 5: 9 integrations on 1 of 1 possible baselines. ! AN table 6: 51 integrations on 3 of 3 possible baselines. ! AN table 7: 9 integrations on 1 of 1 possible baselines. ! AN table 8: 51 integrations on 1 of 1 possible baselines. ! AN table 9: 49 integrations on 3 of 3 possible baselines. ! AN table 10: 49 integrations on 6 of 6 possible baselines. ! AN table 11: 94 integrations on 6 of 6 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 48 integrations on 36 of 36 possible baselines. ! AN table 14: 9 integrations on 1 of 1 possible baselines. ! AN table 15: 18 integrations on 21 of 21 possible baselines. ! AN table 16: 9 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.438168 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1146+3958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 10984 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1146+3958_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 467 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 21 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 132 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 102 telescope corrections were flagged in sub-array 8. ! A total of 54 telescope corrections were flagged in sub-array 9. ! A total of 99 telescope corrections were flagged in sub-array 10. ! A total of 84 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 251 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 37 telescope corrections were flagged in sub-array 15. ! A total of 12 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 467 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 21 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 132 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 102 telescope corrections were flagged in sub-array 8. ! A total of 54 telescope corrections were flagged in sub-array 9. ! A total of 99 telescope corrections were flagged in sub-array 10. ! A total of 84 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 251 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 37 telescope corrections were flagged in sub-array 15. ! A total of 12 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 21 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 153 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 102 telescope corrections were flagged in sub-array 8. ! A total of 147 telescope corrections were flagged in sub-array 9. ! A total of 175 telescope corrections were flagged in sub-array 10. ! A total of 259 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 328 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 52 telescope corrections were flagged in sub-array 15. ! A total of 12 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 477 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 32 telescope corrections were flagged in sub-array 3. ! A total of 21 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 153 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 102 telescope corrections were flagged in sub-array 8. ! A total of 147 telescope corrections were flagged in sub-array 9. ! A total of 175 telescope corrections were flagged in sub-array 10. ! A total of 259 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 328 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! A total of 52 telescope corrections were flagged in sub-array 15. ! A total of 12 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=1.605346Jy sigma=8.524252 ! Fit after self-cal, rms=0.373754Jy sigma=1.650021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7257 mas, bmaj=0.9597 mas, bpa=-2.624 degrees ! Estimated noise=2.41517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.889957 Jy ! Component: 100 - total flux cleaned = 1.08425 Jy ! Total flux subtracted in 100 components = 1.08425 Jy ! Clean residual min=-0.027732 max=0.057071 Jy/beam ! Clean residual mean=0.000081 rms=0.006989 Jy/beam ! Combined flux in latest and established models = 1.08425 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.08425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331102Jy sigma=1.423774 ! Fit after self-cal, rms=0.331096Jy sigma=1.423721 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582693 Jy ! Component: 100 - total flux cleaned = 0.0880356 Jy ! Total flux subtracted in 100 components = 0.0880356 Jy ! Clean residual min=-0.025416 max=0.029918 Jy/beam ! Clean residual mean=0.000018 rms=0.006141 Jy/beam ! Combined flux in latest and established models = 1.17229 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.17229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308283Jy sigma=1.311605 ! Fit after self-cal, rms=0.308221Jy sigma=1.311187 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=1.087 mas, bpa=0.4923 degrees ! Estimated noise=1.79497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0508177 Jy ! Component: 100 - total flux cleaned = 0.0529676 Jy ! Component: 150 - total flux cleaned = 0.0521978 Jy ! Component: 200 - total flux cleaned = 0.052204 Jy ! Total flux subtracted in 200 components = 0.052204 Jy ! Clean residual min=-0.057762 max=0.049288 Jy/beam ! Clean residual mean=-0.000258 rms=0.010950 Jy/beam ! Combined flux in latest and established models = 1.22449 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 1.22449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294693Jy sigma=1.273046 ! Fit after self-cal, rms=0.294738Jy sigma=1.272854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 1.087 at 0.4923 degrees (North through East) ! Clean map min=-0.055046 max=1.1955 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.04 LA 1.03 MK 1.04 ! NL 0.99 NY 1.02 ON 0.90 OV 0.97 ! PT 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.03 NL 0.99 SC 1.04 WF 0.84 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.05 KP 1.00* LA 1.04 MK 1.08 ! NL 1.00 OV 0.99 PT 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! A total of 93 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 108 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00* LA 1.00* MA 1.00* NL 1.00* ! NY 1.00* ON 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.02 HN 1.03 KP 1.00* LA 1.08 ! NL 1.00 NY 1.03 PT 1.08 ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.05 LA 0.98 MK 1.06 ! NL 1.01 NY 1.00 ON 0.87 OV 0.95 ! PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.04 NL 1.01 SC 1.12 WF 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 KP 1.00* LA 1.03 MK 1.08 ! NL 1.01 OV 0.96 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! A total of 93 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 108 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.00* LA 1.00* MA 1.00* NL 1.00* ! NY 1.00* ON 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.04 HN 1.06 KP 1.00* LA 1.06 ! NL 1.03 NY 1.01 PT 0.96 ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.10 LA 1.03 MK 1.03 ! NL 1.05 NY 1.00* ON 1.06 OV 1.04 ! PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.08 NL 1.01 SC 1.07 WF 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.00* LA 1.08 MK 1.07 ! NL 1.04 OV 1.06 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 117 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.08 LA 1.14 MA 1.04 NL 1.11 ! NY 1.00* ON 0.95 PT 1.03 SC 1.08 ! WF 0.89 ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.01 HN 1.08 KP 1.00* LA 1.13 ! NL 1.05 NY 1.00* PT 0.98 ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.10 LA 1.02 MK 1.07 ! NL 1.04 NY 1.00* ON 1.13 OV 1.01 ! PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.07 NL 1.03 SC 1.08 WF 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.06 KP 1.00* LA 1.04 MK 1.10 ! NL 1.05 OV 1.02 PT 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 117 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 1.11 LA 1.09 MA 1.08 NL 1.12 ! NY 1.00* ON 1.03 PT 1.08 SC 1.16 ! WF 0.95 ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.12 HN 1.05 KP 1.00* LA 1.08 ! NL 1.04 NY 1.00* PT 1.00 ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Fit before self-cal, rms=0.294738Jy sigma=1.272854 ! Fit after self-cal, rms=0.261573Jy sigma=1.088879 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8562 mas, bmaj=1.114 mas, bpa=-4.524 degrees ! Estimated noise=1.95381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011448 Jy ! Component: 100 - total flux cleaned = 0.0127938 Jy ! Component: 150 - total flux cleaned = 0.0128423 Jy ! Component: 200 - total flux cleaned = 0.0120078 Jy ! Total flux subtracted in 200 components = 0.0120078 Jy ! Clean residual min=-0.035830 max=0.034711 Jy/beam ! Clean residual mean=-0.000489 rms=0.007538 Jy/beam ! Combined flux in latest and established models = 1.2365 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 1.2365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258019Jy sigma=1.086688 ! Fit after self-cal, rms=0.257903Jy sigma=1.086146 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257903Jy sigma=1.086146 ! Fit after self-cal, rms=0.258034Jy sigma=1.083157 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.857 mas, bmaj=1.11 mas, bpa=-4.809 degrees ! Estimated noise=1.96851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103918 Jy ! Component: 100 - total flux cleaned = 0.0104862 Jy ! Component: 150 - total flux cleaned = 0.0099978 Jy ! Component: 200 - total flux cleaned = 0.00937387 Jy ! Total flux subtracted in 200 components = 0.00937387 Jy ! Clean residual min=-0.035602 max=0.034383 Jy/beam ! Clean residual mean=-0.000538 rms=0.007452 Jy/beam ! Combined flux in latest and established models = 1.24587 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 1.24587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256080Jy sigma=1.082658 ! Fit after self-cal, rms=0.256058Jy sigma=1.082477 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000261788 Jy ! Component: 100 - total flux cleaned = -0.000424225 Jy ! Component: 150 - total flux cleaned = -0.000564659 Jy ! Component: 200 - total flux cleaned = -0.000689814 Jy ! Total flux subtracted in 200 components = -0.000689814 Jy ! Clean residual min=-0.035531 max=0.034167 Jy/beam ! Clean residual mean=-0.000533 rms=0.007416 Jy/beam ! Combined flux in latest and established models = 1.24518 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 1.24518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255644Jy sigma=1.082065 ! Fit after self-cal, rms=0.255635Jy sigma=1.081927 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255635Jy sigma=1.081927 ! Fit after self-cal, rms=0.255494Jy sigma=1.077531 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8576 mas, bmaj=1.107 mas, bpa=-5.079 degrees ! Estimated noise=1.98004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853564 Jy ! Component: 100 - total flux cleaned = 0.00857469 Jy ! Component: 150 - total flux cleaned = 0.00842572 Jy ! Component: 200 - total flux cleaned = 0.00829303 Jy ! Total flux subtracted in 200 components = 0.00829303 Jy ! Clean residual min=-0.035938 max=0.033460 Jy/beam ! Clean residual mean=-0.000528 rms=0.007366 Jy/beam ! Combined flux in latest and established models = 1.25348 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 1.25348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254506Jy sigma=1.077872 ! Fit after self-cal, rms=0.254501Jy sigma=1.077797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.27607e-06 Jy ! Component: 100 - total flux cleaned = -0.000365499 Jy ! Component: 150 - total flux cleaned = -0.000473266 Jy ! Component: 200 - total flux cleaned = -0.000570809 Jy ! Total flux subtracted in 200 components = -0.000570809 Jy ! Clean residual min=-0.035809 max=0.033281 Jy/beam ! Clean residual mean=-0.000524 rms=0.007348 Jy/beam ! Combined flux in latest and established models = 1.25291 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 1.25291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254286Jy sigma=1.077627 ! Fit after self-cal, rms=0.254285Jy sigma=1.077565 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254285Jy sigma=1.077565 ! Fit after self-cal, rms=0.254440Jy sigma=1.076701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=2.733 mas, bpa=55.5 degrees ! Estimated noise=2.63027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123756 Jy ! Component: 100 - total flux cleaned = -0.00171773 Jy ! Component: 150 - total flux cleaned = -0.00172917 Jy ! Component: 200 - total flux cleaned = -0.00217256 Jy ! Total flux subtracted in 200 components = -0.00217256 Jy ! Clean residual min=-0.030032 max=0.026121 Jy/beam ! Clean residual mean=-0.001301 rms=0.007438 Jy/beam ! Combined flux in latest and established models = 1.25073 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 1.25073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256878Jy sigma=1.078371 ! Fit after self-cal, rms=0.256931Jy sigma=1.078244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469516 Jy ! Component: 100 - total flux cleaned = -0.000851382 Jy ! Component: 150 - total flux cleaned = -0.00087128 Jy ! Component: 200 - total flux cleaned = -0.00122045 Jy ! Total flux subtracted in 200 components = -0.00122045 Jy ! Clean residual min=-0.029642 max=0.025191 Jy/beam ! Clean residual mean=-0.001279 rms=0.007256 Jy/beam ! Combined flux in latest and established models = 1.24951 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 1.24951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260310Jy sigma=1.087414 ! Fit after self-cal, rms=0.260357Jy sigma=1.087353 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8578 mas, bmaj=1.105 mas, bpa=-5.238 degrees ! Estimated noise=1.98774 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8578 x 1.105 at -5.238 degrees (North through East) ! Clean map min=-0.034339 max=1.2339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260357Jy sigma=1.087353 ! Fit after self-cal, rms=0.253983Jy sigma=1.045602 ! Inverting map and beam ! Estimated beam: bmin=0.8554 mas, bmaj=1.106 mas, bpa=-4.204 degrees ! Estimated noise=1.98512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537561 Jy ! Component: 100 - total flux cleaned = 0.000966009 Jy ! Component: 150 - total flux cleaned = 0.00128398 Jy ! Component: 200 - total flux cleaned = 0.00126321 Jy ! Total flux subtracted in 200 components = 0.00126321 Jy ! Clean residual min=-0.034751 max=0.029843 Jy/beam ! Clean residual mean=-0.000478 rms=0.007101 Jy/beam ! Combined flux in latest and established models = 1.25078 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 1.25078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251001Jy sigma=1.042367 ! Fit after self-cal, rms=0.250944Jy sigma=1.042325 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455617 Jy ! Component: 100 - total flux cleaned = 0.000835869 Jy ! Component: 150 - total flux cleaned = 0.00151338 Jy ! Component: 200 - total flux cleaned = 0.00196661 Jy ! Total flux subtracted in 200 components = 0.00196661 Jy ! Clean residual min=-0.034849 max=0.030214 Jy/beam ! Clean residual mean=-0.000492 rms=0.007093 Jy/beam ! Combined flux in latest and established models = 1.25274 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 1.25274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250297Jy sigma=1.042293 ! Fit after self-cal, rms=0.250285Jy sigma=1.042281 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250285Jy sigma=1.042281 ! Fit after self-cal, rms=0.249301Jy sigma=1.033956 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7239 mas, bmaj=0.9662 mas, bpa=-8.041 degrees ! Estimated noise=2.60874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.933599 Jy ! Component: 100 - total flux cleaned = 1.14061 Jy ! Component: 150 - total flux cleaned = 1.2115 Jy ! Component: 200 - total flux cleaned = 1.24474 Jy ! Total flux subtracted in 200 components = 1.24474 Jy ! Clean residual min=-0.023581 max=0.022323 Jy/beam ! Clean residual mean=-0.000068 rms=0.005133 Jy/beam ! Combined flux in latest and established models = 1.24474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.24474 Jy ! Inverting map and beam ! Estimated beam: bmin=0.857 mas, bmaj=1.104 mas, bpa=-4.804 degrees ! Estimated noise=1.98991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369233 Jy ! Component: 100 - total flux cleaned = 0.0370906 Jy ! Component: 150 - total flux cleaned = 0.0338865 Jy ! Component: 200 - total flux cleaned = 0.0317628 Jy ! Total flux subtracted in 200 components = 0.0317628 Jy ! Clean residual min=-0.032512 max=0.031453 Jy/beam ! Clean residual mean=-0.000619 rms=0.006951 Jy/beam ! Combined flux in latest and established models = 1.2765 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 1.2765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=2.738 mas, bpa=55.29 degrees ! Estimated noise=2.63402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0107331 Jy ! Component: 100 - total flux cleaned = -0.0148591 Jy ! Component: 150 - total flux cleaned = -0.0178434 Jy ! Component: 200 - total flux cleaned = -0.0194719 Jy ! Total flux subtracted in 200 components = -0.0194719 Jy ! Clean residual min=-0.028838 max=0.025201 Jy/beam ! Clean residual mean=-0.001256 rms=0.006898 Jy/beam ! Combined flux in latest and established models = 1.25703 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020035 Jy ! Component: 100 - total flux cleaned = -0.00338252 Jy ! Component: 150 - total flux cleaned = -0.00424596 Jy ! Component: 200 - total flux cleaned = -0.00507297 Jy ! Total flux subtracted in 200 components = -0.00507297 Jy ! Clean residual min=-0.027656 max=0.025028 Jy/beam ! Clean residual mean=-0.001162 rms=0.006625 Jy/beam ! Combined flux in latest and established models = 1.25196 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 1.25196 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.857 mas, bmaj=1.104 mas, bpa=-4.804 degrees ! Estimated noise=1.98991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830467 Jy ! Component: 100 - total flux cleaned = 0.0113234 Jy ! Component: 150 - total flux cleaned = 0.0113664 Jy ! Component: 200 - total flux cleaned = 0.0109933 Jy ! Total flux subtracted in 200 components = 0.0109933 Jy ! Clean residual min=-0.030609 max=0.028190 Jy/beam ! Clean residual mean=-0.000523 rms=0.006377 Jy/beam ! Combined flux in latest and established models = 1.26295 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 1.26295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243497Jy sigma=1.010078 ! Fit after self-cal, rms=0.242950Jy sigma=1.005369 wmodel /d2/scr/pima/rv101_uvs/J1146+3958_X_map.mod ! Writing 47 model components to file: /d2/scr/pima/rv101_uvs/J1146+3958_X_map.mod wobs /d2/scr/pima/rv101_uvs/J1146+3958_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1146+3958_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J1146+3958_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245026 Jy ! Component: 100 - total flux cleaned = 0.000471404 Jy ! Component: 150 - total flux cleaned = 0.00185415 Jy ! Component: 200 - total flux cleaned = 0.00361949 Jy ! Component: 250 - total flux cleaned = 0.00403941 Jy ! Component: 300 - total flux cleaned = 0.00321476 Jy ! Component: 350 - total flux cleaned = 0.00241714 Jy ! Component: 400 - total flux cleaned = 0.00164207 Jy ! Component: 450 - total flux cleaned = -0.000234441 Jy ! Component: 500 - total flux cleaned = -0.00169689 Jy ! Component: 550 - total flux cleaned = -0.0031293 Jy ! Component: 600 - total flux cleaned = -0.00521958 Jy ! Component: 650 - total flux cleaned = -0.00623772 Jy ! Component: 700 - total flux cleaned = -0.0075729 Jy ! Component: 750 - total flux cleaned = -0.00887522 Jy ! Component: 800 - total flux cleaned = -0.0101541 Jy ! Component: 850 - total flux cleaned = -0.0110941 Jy ! Component: 900 - total flux cleaned = -0.0117122 Jy ! Component: 950 - total flux cleaned = -0.0126241 Jy ! Component: 1000 - total flux cleaned = -0.0141083 Jy ! Component: 1050 - total flux cleaned = -0.014401 Jy ! Component: 1100 - total flux cleaned = -0.0152648 Jy ! Component: 1150 - total flux cleaned = -0.016397 Jy ! Component: 1200 - total flux cleaned = -0.0177829 Jy ! Component: 1250 - total flux cleaned = -0.0177772 Jy ! Component: 1300 - total flux cleaned = -0.0188602 Jy ! Component: 1350 - total flux cleaned = -0.0193938 Jy ! Component: 1400 - total flux cleaned = -0.0201821 Jy ! Component: 1450 - total flux cleaned = -0.0219883 Jy ! Component: 1500 - total flux cleaned = -0.0227499 Jy ! Component: 1550 - total flux cleaned = -0.0237505 Jy ! Component: 1600 - total flux cleaned = -0.023257 Jy ! Component: 1650 - total flux cleaned = -0.0242343 Jy ! Component: 1700 - total flux cleaned = -0.0247182 Jy ! Component: 1750 - total flux cleaned = -0.0254321 Jy ! Component: 1800 - total flux cleaned = -0.0261357 Jy ! Component: 1850 - total flux cleaned = -0.0261334 Jy ! Component: 1900 - total flux cleaned = -0.0265931 Jy ! Component: 1950 - total flux cleaned = -0.0268189 Jy ! Component: 2000 - total flux cleaned = -0.0268182 Jy ! Component: 2050 - total flux cleaned = -0.0272606 Jy ! Component: 2100 - total flux cleaned = -0.0270444 Jy ! Component: 2150 - total flux cleaned = -0.0272638 Jy ! Component: 2200 - total flux cleaned = -0.0279081 Jy ! Component: 2250 - total flux cleaned = -0.0281197 Jy ! Component: 2300 - total flux cleaned = -0.0283291 Jy ! Component: 2350 - total flux cleaned = -0.0283272 Jy ! Component: 2400 - total flux cleaned = -0.0287386 Jy ! Component: 2450 - total flux cleaned = -0.0283326 Jy ! Component: 2500 - total flux cleaned = -0.028737 Jy ! Component: 2550 - total flux cleaned = -0.0287376 Jy ! Component: 2600 - total flux cleaned = -0.0289377 Jy ! Component: 2650 - total flux cleaned = -0.0293282 Jy ! Component: 2700 - total flux cleaned = -0.0293287 Jy ! Component: 2750 - total flux cleaned = -0.0293282 Jy ! Component: 2800 - total flux cleaned = -0.0291379 Jy ! Component: 2850 - total flux cleaned = -0.0300808 Jy ! Component: 2900 - total flux cleaned = -0.0298938 Jy ! Component: 2950 - total flux cleaned = -0.0306321 Jy ! Component: 3000 - total flux cleaned = -0.0306323 Jy ! Component: 3050 - total flux cleaned = -0.030632 Jy ! Component: 3100 - total flux cleaned = -0.0311709 Jy ! Component: 3150 - total flux cleaned = -0.0313481 Jy ! Component: 3200 - total flux cleaned = -0.031349 Jy ! Component: 3250 - total flux cleaned = -0.0315236 Jy ! Component: 3300 - total flux cleaned = -0.0318711 Jy ! Component: 3350 - total flux cleaned = -0.0318704 Jy ! Component: 3400 - total flux cleaned = -0.0318703 Jy ! Component: 3450 - total flux cleaned = -0.0323767 Jy ! Component: 3500 - total flux cleaned = -0.0325423 Jy ! Component: 3550 - total flux cleaned = -0.0322123 Jy ! Component: 3600 - total flux cleaned = -0.0322134 Jy ! Component: 3650 - total flux cleaned = -0.0327032 Jy ! Component: 3700 - total flux cleaned = -0.0328668 Jy ! Component: 3750 - total flux cleaned = -0.0335098 Jy ! Component: 3800 - total flux cleaned = -0.0335109 Jy ! Component: 3850 - total flux cleaned = -0.0339855 Jy ! Component: 3900 - total flux cleaned = -0.0341414 Jy ! Component: 3950 - total flux cleaned = -0.0347627 Jy ! Component: 4000 - total flux cleaned = -0.034454 Jy ! Component: 4050 - total flux cleaned = -0.0349128 Jy ! Total flux subtracted in 4096 components = -0.0352165 Jy ! Clean residual min=-0.008526 max=0.009666 Jy/beam ! Clean residual mean=-0.000133 rms=0.002622 Jy/beam ! Combined flux in latest and established models = 1.22773 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 405 components and 1.22773 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1146+3958_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.857 x 1.104 at -4.804 degrees (North through East) ! Clean map min=-0.022859 max=1.227 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.22702 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00259478 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.63441 0.63441 1.26882 2.53764 5.07528 10.1506 20.3011 40.6022 81.2045 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0077 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.227 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 472.88 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1146+3958_X_uvs.log closed on Sat Nov 29 16:33:37 2014