! Started logfile: /d2/scr/pima/rv101_uvs/J1146+3958_S_uvs.log on Sat Nov 29 13:53:07 2014 obs /d2/scr/pima/rv101_uvs/J1146+3958_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_S_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! AN table 2: 2 integrations on 6 of 6 possible baselines. ! AN table 3: 4 integrations on 6 of 6 possible baselines. ! AN table 4: 2 integrations on 21 of 21 possible baselines. ! AN table 5: 2 integrations on 1 of 1 possible baselines. ! AN table 6: 12 integrations on 3 of 3 possible baselines. ! AN table 7: 2 integrations on 1 of 1 possible baselines. ! AN table 8: 13 integrations on 1 of 1 possible baselines. ! AN table 9: 12 integrations on 3 of 3 possible baselines. ! AN table 10: 12 integrations on 6 of 6 possible baselines. ! AN table 11: 22 integrations on 6 of 6 possible baselines. ! AN table 12: 2 integrations on 3 of 3 possible baselines. ! AN table 13: 12 integrations on 45 of 45 possible baselines. ! AN table 14: 2 integrations on 1 of 1 possible baselines. ! AN table 15: 4 integrations on 21 of 21 possible baselines. ! AN table 16: 2 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.466007 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1146+3958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3016 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1146+3958_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 27 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 63 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 27 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 39 telescope corrections were flagged in sub-array 10. ! A total of 52 telescope corrections were flagged in sub-array 11. ! A total of 84 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 27 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 10 telescope corrections were flagged in sub-array 11. ! A total of 63 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 27 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 26 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 39 telescope corrections were flagged in sub-array 10. ! A total of 52 telescope corrections were flagged in sub-array 11. ! A total of 84 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=1.548701Jy sigma=5.862057 ! Fit after self-cal, rms=0.891893Jy sigma=2.070258 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=4.258 mas, bpa=-13.57 degrees ! Estimated noise=4.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.505499 Jy ! Component: 100 - total flux cleaned = 0.624283 Jy ! Total flux subtracted in 100 components = 0.624283 Jy ! Clean residual min=-0.028975 max=0.057822 Jy/beam ! Clean residual mean=-0.000049 rms=0.006620 Jy/beam ! Combined flux in latest and established models = 0.624283 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.624283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.917479Jy sigma=0.843347 ! Fit after self-cal, rms=0.917398Jy sigma=0.843243 ! Inverting map ! Added new window around map position (-3.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551085 Jy ! Component: 100 - total flux cleaned = 0.0632772 Jy ! Total flux subtracted in 100 components = 0.0632772 Jy ! Clean residual min=-0.028821 max=0.044390 Jy/beam ! Clean residual mean=-0.000129 rms=0.005777 Jy/beam ! Combined flux in latest and established models = 0.68756 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.68756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.904682Jy sigma=0.797880 ! Fit after self-cal, rms=0.904377Jy sigma=0.796197 ! Inverting map ! Added new window around map position (3.5, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01978 Jy ! Component: 100 - total flux cleaned = 0.0186677 Jy ! Total flux subtracted in 100 components = 0.0186677 Jy ! Clean residual min=-0.025422 max=0.024282 Jy/beam ! Clean residual mean=-0.000152 rms=0.005425 Jy/beam ! Combined flux in latest and established models = 0.706227 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.706227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.898317Jy sigma=0.776301 ! Fit after self-cal, rms=0.898306Jy sigma=0.775965 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=4.968 mas, bpa=-10.87 degrees ! Estimated noise=3.53078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0362117 Jy ! Component: 100 - total flux cleaned = -0.043942 Jy ! Component: 150 - total flux cleaned = -0.0455583 Jy ! Component: 200 - total flux cleaned = -0.0469583 Jy ! Total flux subtracted in 200 components = -0.0469583 Jy ! Clean residual min=-0.030521 max=0.029698 Jy/beam ! Clean residual mean=-0.002746 rms=0.005539 Jy/beam ! Combined flux in latest and established models = 0.659269 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.659269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.888220Jy sigma=0.746858 ! Fit after self-cal, rms=0.888165Jy sigma=0.746763 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 4.968 at -10.87 degrees (North through East) ! Clean map min=-0.029729 max=0.6595 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.93 KP 1.18 LA 1.05 MK 1.10 ! NL 1.12 OV 0.99 PT 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 KP 1.02 LA 0.96 MK 1.02 ! NL 1.18 OV 0.98 PT 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.03 HN 1.01 KP 1.02 LA 0.94 ! NL 1.03 NY 1.00 PT 1.03 ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* NL 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! LA 0.00* MK 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* NY 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! HN 1.00* LA 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! ! Fit before self-cal, rms=0.888165Jy sigma=0.746763 ! Fit after self-cal, rms=0.672549Jy sigma=0.713817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=5.102 mas, bpa=-13.16 degrees ! Estimated noise=3.61788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00618645 Jy ! Component: 100 - total flux cleaned = -0.00669072 Jy ! Component: 150 - total flux cleaned = -0.00713664 Jy ! Component: 200 - total flux cleaned = -0.00713222 Jy ! Total flux subtracted in 200 components = -0.00713222 Jy ! Clean residual min=-0.024148 max=0.019067 Jy/beam ! Clean residual mean=-0.002423 rms=0.004638 Jy/beam ! Combined flux in latest and established models = 0.652137 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.652137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670991Jy sigma=0.709058 ! Fit after self-cal, rms=0.670972Jy sigma=0.709008 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670972Jy sigma=0.709008 ! Fit after self-cal, rms=0.670963Jy sigma=0.708518 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=5.105 mas, bpa=-13.06 degrees ! Estimated noise=3.6189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129949 Jy ! Component: 100 - total flux cleaned = -0.0013122 Jy ! Component: 150 - total flux cleaned = -0.00165829 Jy ! Component: 200 - total flux cleaned = -0.00165743 Jy ! Total flux subtracted in 200 components = -0.00165743 Jy ! Clean residual min=-0.024428 max=0.019095 Jy/beam ! Clean residual mean=-0.002398 rms=0.004602 Jy/beam ! Combined flux in latest and established models = 0.650479 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.650479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.669770Jy sigma=0.707152 ! Fit after self-cal, rms=0.669763Jy sigma=0.707132 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.22417e-05 Jy ! Component: 100 - total flux cleaned = 0.000305802 Jy ! Component: 150 - total flux cleaned = 0.000304358 Jy ! Component: 200 - total flux cleaned = 0.000315406 Jy ! Total flux subtracted in 200 components = 0.000315406 Jy ! Clean residual min=-0.024307 max=0.019273 Jy/beam ! Clean residual mean=-0.002403 rms=0.004592 Jy/beam ! Combined flux in latest and established models = 0.650795 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.650795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668678Jy sigma=0.706597 ! Fit after self-cal, rms=0.668687Jy sigma=0.706573 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668687Jy sigma=0.706573 ! Fit after self-cal, rms=0.668581Jy sigma=0.699918 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=5.102 mas, bpa=-13.01 degrees ! Estimated noise=3.63149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180059 Jy ! Component: 100 - total flux cleaned = 0.00207223 Jy ! Component: 150 - total flux cleaned = 0.00207126 Jy ! Component: 200 - total flux cleaned = 0.00207973 Jy ! Total flux subtracted in 200 components = 0.00207973 Jy ! Clean residual min=-0.024085 max=0.018802 Jy/beam ! Clean residual mean=-0.002409 rms=0.004567 Jy/beam ! Combined flux in latest and established models = 0.652875 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.652875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667098Jy sigma=0.700849 ! Fit after self-cal, rms=0.667101Jy sigma=0.700833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245511 Jy ! Component: 100 - total flux cleaned = 0.000244119 Jy ! Component: 150 - total flux cleaned = 0.00047683 Jy ! Component: 200 - total flux cleaned = 0.000472846 Jy ! Total flux subtracted in 200 components = 0.000472846 Jy ! Clean residual min=-0.023995 max=0.018941 Jy/beam ! Clean residual mean=-0.002417 rms=0.004561 Jy/beam ! Combined flux in latest and established models = 0.653348 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.653348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.666318Jy sigma=0.700751 ! Fit after self-cal, rms=0.666313Jy sigma=0.700740 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.666313Jy sigma=0.700740 ! Fit after self-cal, rms=0.666315Jy sigma=0.700628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.396 mas, bmaj=10.98 mas, bpa=26.21 degrees ! Estimated noise=4.13385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193368 Jy ! Component: 100 - total flux cleaned = 0.00210733 Jy ! Component: 150 - total flux cleaned = 0.00210348 Jy ! Component: 200 - total flux cleaned = 0.00210554 Jy ! Total flux subtracted in 200 components = 0.00210554 Jy ! Clean residual min=-0.024378 max=0.015064 Jy/beam ! Clean residual mean=-0.005193 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 0.655453 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.655453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667444Jy sigma=0.699893 ! Fit after self-cal, rms=0.667477Jy sigma=0.699848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.65893e-05 Jy ! Component: 100 - total flux cleaned = -4.63665e-05 Jy ! Component: 150 - total flux cleaned = -0.000131955 Jy ! Component: 200 - total flux cleaned = -0.00020458 Jy ! Total flux subtracted in 200 components = -0.00020458 Jy ! Clean residual min=-0.024200 max=0.014564 Jy/beam ! Clean residual mean=-0.005185 rms=0.005020 Jy/beam ! Combined flux in latest and established models = 0.655249 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.655249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667718Jy sigma=0.700172 ! Fit after self-cal, rms=0.667763Jy sigma=0.700143 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=5.101 mas, bpa=-12.98 degrees ! Estimated noise=3.63478 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 5.101 at -12.98 degrees (North through East) ! Clean map min=-0.025252 max=0.66493 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.667763Jy sigma=0.700143 ! Fit after self-cal, rms=0.667627Jy sigma=0.696006 ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=5.096 mas, bpa=-13 degrees ! Estimated noise=3.6383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356248 Jy ! Component: 100 - total flux cleaned = 0.00305591 Jy ! Component: 150 - total flux cleaned = 0.00258435 Jy ! Component: 200 - total flux cleaned = 0.00236183 Jy ! Total flux subtracted in 200 components = 0.00236183 Jy ! Clean residual min=-0.024278 max=0.017829 Jy/beam ! Clean residual mean=-0.002497 rms=0.004502 Jy/beam ! Combined flux in latest and established models = 0.65761 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.65761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.666006Jy sigma=0.696355 ! Fit after self-cal, rms=0.665984Jy sigma=0.696349 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.97562e-06 Jy ! Component: 100 - total flux cleaned = -0.000223418 Jy ! Component: 150 - total flux cleaned = -0.000221568 Jy ! Component: 200 - total flux cleaned = -0.000221041 Jy ! Total flux subtracted in 200 components = -0.000221041 Jy ! Clean residual min=-0.024185 max=0.018085 Jy/beam ! Clean residual mean=-0.002493 rms=0.004504 Jy/beam ! Combined flux in latest and established models = 0.657389 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.657389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.665304Jy sigma=0.696213 ! Fit after self-cal, rms=0.665294Jy sigma=0.696210 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.665294Jy sigma=0.696210 ! Fit after self-cal, rms=0.665296Jy sigma=0.696116 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=4.41 mas, bpa=-15.85 degrees ! Estimated noise=4.6534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.511032 Jy ! Component: 100 - total flux cleaned = 0.632819 Jy ! Component: 150 - total flux cleaned = 0.6963 Jy ! Component: 200 - total flux cleaned = 0.712438 Jy ! Total flux subtracted in 200 components = 0.712438 Jy ! Clean residual min=-0.025124 max=0.025252 Jy/beam ! Clean residual mean=-0.000165 rms=0.005423 Jy/beam ! Combined flux in latest and established models = 0.712438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.712438 Jy ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=5.096 mas, bpa=-13 degrees ! Estimated noise=3.64012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0359269 Jy ! Component: 100 - total flux cleaned = -0.0427485 Jy ! Component: 150 - total flux cleaned = -0.0435616 Jy ! Component: 200 - total flux cleaned = -0.0442758 Jy ! Total flux subtracted in 200 components = -0.0442758 Jy ! Clean residual min=-0.024075 max=0.017205 Jy/beam ! Clean residual mean=-0.002676 rms=0.004606 Jy/beam ! Combined flux in latest and established models = 0.668162 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.668162 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.397 mas, bmaj=10.96 mas, bpa=26.2 degrees ! Estimated noise=4.14445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00595798 Jy ! Component: 100 - total flux cleaned = -0.00706093 Jy ! Component: 150 - total flux cleaned = -0.00790383 Jy ! Component: 200 - total flux cleaned = -0.00832637 Jy ! Total flux subtracted in 200 components = -0.00832637 Jy ! Clean residual min=-0.024351 max=0.015449 Jy/beam ! Clean residual mean=-0.005374 rms=0.004999 Jy/beam ! Combined flux in latest and established models = 0.659836 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249702 Jy ! Component: 100 - total flux cleaned = -0.000480616 Jy ! Component: 150 - total flux cleaned = -0.000690035 Jy ! Component: 200 - total flux cleaned = -0.00078542 Jy ! Total flux subtracted in 200 components = -0.00078542 Jy ! Clean residual min=-0.024283 max=0.015148 Jy/beam ! Clean residual mean=-0.005345 rms=0.004984 Jy/beam ! Combined flux in latest and established models = 0.65905 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.65905 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=5.096 mas, bpa=-13 degrees ! Estimated noise=3.64012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289471 Jy ! Component: 100 - total flux cleaned = 0.00288034 Jy ! Component: 150 - total flux cleaned = 0.00239456 Jy ! Component: 200 - total flux cleaned = 0.00194946 Jy ! Total flux subtracted in 200 components = 0.00194946 Jy ! Clean residual min=-0.024246 max=0.016127 Jy/beam ! Clean residual mean=-0.002552 rms=0.004546 Jy/beam ! Combined flux in latest and established models = 0.661 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.672207Jy sigma=0.700166 ! Fit after self-cal, rms=0.672305Jy sigma=0.700124 wmodel /d2/scr/pima/rv101_uvs/J1146+3958_S_map.mod ! Writing 40 model components to file: /d2/scr/pima/rv101_uvs/J1146+3958_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1146+3958_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1146+3958_S_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J1146+3958_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109312 Jy ! Component: 100 - total flux cleaned = -0.0207542 Jy ! Component: 150 - total flux cleaned = -0.029978 Jy ! Component: 200 - total flux cleaned = -0.0387483 Jy ! Component: 250 - total flux cleaned = -0.0461452 Jy ! Component: 300 - total flux cleaned = -0.052313 Jy ! Component: 350 - total flux cleaned = -0.0582977 Jy ! Component: 400 - total flux cleaned = -0.0638155 Jy ! Component: 450 - total flux cleaned = -0.0680016 Jy ! Component: 500 - total flux cleaned = -0.0715142 Jy ! Component: 550 - total flux cleaned = -0.0755289 Jy ! Component: 600 - total flux cleaned = -0.0789002 Jy ! Component: 650 - total flux cleaned = -0.0827556 Jy ! Component: 700 - total flux cleaned = -0.0862682 Jy ! Component: 750 - total flux cleaned = -0.0899847 Jy ! Component: 800 - total flux cleaned = -0.0936367 Jy ! Component: 850 - total flux cleaned = -0.0964596 Jy ! Component: 900 - total flux cleaned = -0.0992469 Jy ! Component: 950 - total flux cleaned = -0.101997 Jy ! Component: 1000 - total flux cleaned = -0.104955 Jy ! Component: 1050 - total flux cleaned = -0.107389 Jy ! Component: 1100 - total flux cleaned = -0.110032 Jy ! Component: 1150 - total flux cleaned = -0.11264 Jy ! Component: 1200 - total flux cleaned = -0.114748 Jy ! Component: 1250 - total flux cleaned = -0.117522 Jy ! Component: 1300 - total flux cleaned = -0.119576 Jy ! Component: 1350 - total flux cleaned = -0.121606 Jy ! Component: 1400 - total flux cleaned = -0.123613 Jy ! Component: 1450 - total flux cleaned = -0.125377 Jy ! Component: 1500 - total flux cleaned = -0.127123 Jy ! Component: 1550 - total flux cleaned = -0.128634 Jy ! Component: 1600 - total flux cleaned = -0.13013 Jy ! Component: 1650 - total flux cleaned = -0.131821 Jy ! Component: 1700 - total flux cleaned = -0.13308 Jy ! Component: 1750 - total flux cleaned = -0.134738 Jy ! Component: 1800 - total flux cleaned = -0.13597 Jy ! Component: 1850 - total flux cleaned = -0.137192 Jy ! Component: 1900 - total flux cleaned = -0.139207 Jy ! Component: 1950 - total flux cleaned = -0.140005 Jy ! Component: 2000 - total flux cleaned = -0.141391 Jy ! Component: 2050 - total flux cleaned = -0.14257 Jy ! Component: 2100 - total flux cleaned = -0.143932 Jy ! Component: 2150 - total flux cleaned = -0.144704 Jy ! Component: 2200 - total flux cleaned = -0.145662 Jy ! Component: 2250 - total flux cleaned = -0.146612 Jy ! Component: 2300 - total flux cleaned = -0.147366 Jy ! Component: 2350 - total flux cleaned = -0.147742 Jy ! Component: 2400 - total flux cleaned = -0.148673 Jy ! Component: 2450 - total flux cleaned = -0.149411 Jy ! Component: 2500 - total flux cleaned = -0.149962 Jy ! Component: 2550 - total flux cleaned = -0.150693 Jy ! Component: 2600 - total flux cleaned = -0.151418 Jy ! Component: 2650 - total flux cleaned = -0.152498 Jy ! Component: 2700 - total flux cleaned = -0.153213 Jy ! Component: 2750 - total flux cleaned = -0.153922 Jy ! Component: 2800 - total flux cleaned = -0.154452 Jy ! Component: 2850 - total flux cleaned = -0.155153 Jy ! Component: 2900 - total flux cleaned = -0.155851 Jy ! Component: 2950 - total flux cleaned = -0.15637 Jy ! Component: 3000 - total flux cleaned = -0.157059 Jy ! Component: 3050 - total flux cleaned = -0.157914 Jy ! Component: 3100 - total flux cleaned = -0.158425 Jy ! Component: 3150 - total flux cleaned = -0.159101 Jy ! Component: 3200 - total flux cleaned = -0.159605 Jy ! Component: 3250 - total flux cleaned = -0.159773 Jy ! Component: 3300 - total flux cleaned = -0.160605 Jy ! Component: 3350 - total flux cleaned = -0.161101 Jy ! Component: 3400 - total flux cleaned = -0.161758 Jy ! Component: 3450 - total flux cleaned = -0.162085 Jy ! Component: 3500 - total flux cleaned = -0.16241 Jy ! Component: 3550 - total flux cleaned = -0.163056 Jy ! Component: 3600 - total flux cleaned = -0.163378 Jy ! Component: 3650 - total flux cleaned = -0.163379 Jy ! Component: 3700 - total flux cleaned = -0.164016 Jy ! Component: 3750 - total flux cleaned = -0.164491 Jy ! Component: 3800 - total flux cleaned = -0.164648 Jy ! Component: 3850 - total flux cleaned = -0.164962 Jy ! Component: 3900 - total flux cleaned = -0.165742 Jy ! Component: 3950 - total flux cleaned = -0.165742 Jy ! Component: 4000 - total flux cleaned = -0.166205 Jy ! Component: 4050 - total flux cleaned = -0.166513 Jy ! Total flux subtracted in 4096 components = -0.166819 Jy ! Clean residual min=-0.008217 max=0.008567 Jy/beam ! Clean residual mean=-0.000251 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 0.494181 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 308 components and 0.494181 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1146+3958_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 5.096 at -13 degrees (North through East) ! Clean map min=-0.021009 max=0.67779 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1146+3958_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.677794 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00261078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15557 1.15557 2.31113 4.62226 9.24452 18.489 36.9781 73.9562 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0078 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.677 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 259.613 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1146+3958_S_uvs.log closed on Sat Nov 29 13:53:11 2014