! Started logfile: /d2/scr/pima/rv101_uvs/J1018+0530_S_uvs.log on Sat Nov 29 13:52:40 2014
obs /d2/scr/pima/rv101_uvs/J1018+0530_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1018+0530_S_uva.fits
! AN table 1: 15 integrations on 28 of 28 possible baselines.
! AN table 2: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.96 visibilities/baseline/integration-bin.
! Found source: J1018+0530
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6624 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1018+0530_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.020995Jy  sigma=13.202158
! Fit after  self-cal, rms=0.785136Jy  sigma=10.188354
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.548 mas, bmaj=7.429 mas, bpa=-6.374 degrees
! Estimated noise=1.37544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17307 Jy
! Component: 100  -  total flux cleaned = 0.214004 Jy
! Total flux subtracted in 100 components = 0.214004 Jy
! Clean residual min=-0.010525 max=0.015827 Jy/beam
! Clean residual mean=-0.000048 rms=0.002850 Jy/beam
! Combined flux in latest and established models = 0.214004 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.214004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090040Jy  sigma=0.998525
! Fit after  self-cal, rms=0.090033Jy  sigma=0.998310
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.013 mas, bmaj=8.375 mas, bpa=-5.967 degrees
! Estimated noise=0.723567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166788 Jy
! Component: 100  -  total flux cleaned = 0.0261398 Jy
! Component: 150  -  total flux cleaned = 0.0319575 Jy
! Component: 200  -  total flux cleaned = 0.034836 Jy
! Total flux subtracted in 200 components = 0.034836 Jy
! Clean residual min=-0.009582 max=0.007378 Jy/beam
! Clean residual mean=-0.000724 rms=0.001938 Jy/beam
! Combined flux in latest and established models = 0.24884 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 0.24884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086609Jy  sigma=0.951190
! Fit after  self-cal, rms=0.086653Jy  sigma=0.950931
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.013 x 8.375 at -5.967 degrees (North through East)
! Clean map  min=-0.0091922  max=0.21712 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.99     LA        1.02     MK        0.88     
!   NL        0.98     OV        1.01     PT        1.03     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.95     LA        0.94     MK        0.95     
!   NL        1.03     OV        0.97     PT        0.99     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Fit before self-cal, rms=0.086653Jy  sigma=0.950931
! Fit after  self-cal, rms=0.086054Jy  sigma=0.949119
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=8.374 mas, bpa=-6.044 degrees
! Estimated noise=0.720675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043572 Jy
! Component: 100  -  total flux cleaned = 0.000645908 Jy
! Component: 150  -  total flux cleaned = 0.000833043 Jy
! Component: 200  -  total flux cleaned = 0.00100065 Jy
! Total flux subtracted in 200 components = 0.00100065 Jy
! Clean residual min=-0.008889 max=0.006947 Jy/beam
! Clean residual mean=-0.000728 rms=0.001848 Jy/beam
! Combined flux in latest and established models = 0.24984 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.24984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085814Jy  sigma=0.946505
! Fit after  self-cal, rms=0.085806Jy  sigma=0.946438
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085806Jy  sigma=0.946438
! Fit after  self-cal, rms=0.084293Jy  sigma=0.942522
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.006 mas, bmaj=8.366 mas, bpa=-6.042 degrees
! Estimated noise=0.717905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.62461e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145723 Jy
! Component: 150  -  total flux cleaned = 0.000146059 Jy
! Component: 200  -  total flux cleaned = 0.000145439 Jy
! Total flux subtracted in 200 components = 0.000145439 Jy
! Clean residual min=-0.008545 max=0.006697 Jy/beam
! Clean residual mean=-0.000731 rms=0.001792 Jy/beam
! Combined flux in latest and established models = 0.249986 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 0.249986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084195Jy  sigma=0.941355
! Fit after  self-cal, rms=0.084187Jy  sigma=0.941301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249058 Jy
! Component: 100  -  total flux cleaned = 0.000246416 Jy
! Component: 150  -  total flux cleaned = 0.000247081 Jy
! Component: 200  -  total flux cleaned = 0.000201317 Jy
! Total flux subtracted in 200 components = 0.000201317 Jy
! Clean residual min=-0.008482 max=0.006669 Jy/beam
! Clean residual mean=-0.000733 rms=0.001772 Jy/beam
! Combined flux in latest and established models = 0.250187 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.250187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084128Jy  sigma=0.940633
! Fit after  self-cal, rms=0.084127Jy  sigma=0.940621
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084127Jy  sigma=0.940621
! Fit after  self-cal, rms=0.084005Jy  sigma=0.940835
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.003 mas, bmaj=8.367 mas, bpa=-6.083 degrees
! Estimated noise=0.718295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293909 Jy
! Component: 100  -  total flux cleaned = 0.00025021 Jy
! Component: 150  -  total flux cleaned = 0.000206759 Jy
! Component: 200  -  total flux cleaned = 0.000163595 Jy
! Total flux subtracted in 200 components = 0.000163595 Jy
! Clean residual min=-0.008488 max=0.006589 Jy/beam
! Clean residual mean=-0.000735 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 0.250351 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.250351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083949Jy  sigma=0.940389
! Fit after  self-cal, rms=0.083948Jy  sigma=0.940378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.29741e-06 Jy
! Component: 100  -  total flux cleaned = -3.67817e-05 Jy
! Component: 150  -  total flux cleaned = -7.56298e-05 Jy
! Component: 200  -  total flux cleaned = -0.000113394 Jy
! Total flux subtracted in 200 components = -0.000113394 Jy
! Clean residual min=-0.008463 max=0.006560 Jy/beam
! Clean residual mean=-0.000734 rms=0.001757 Jy/beam
! Combined flux in latest and established models = 0.250237 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.250237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083909Jy  sigma=0.940002
! Fit after  self-cal, rms=0.083908Jy  sigma=0.939995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083908Jy  sigma=0.939995
! Fit after  self-cal, rms=0.083985Jy  sigma=0.939992
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.788 mas, bmaj=13.78 mas, bpa=-10.37 degrees
! Estimated noise=0.907352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696943 Jy
! Component: 100  -  total flux cleaned = 0.000635769 Jy
! Component: 150  -  total flux cleaned = 0.000574486 Jy
! Component: 200  -  total flux cleaned = 0.000517159 Jy
! Total flux subtracted in 200 components = 0.000517159 Jy
! Clean residual min=-0.011179 max=0.006067 Jy/beam
! Clean residual mean=-0.001728 rms=0.002398 Jy/beam
! Combined flux in latest and established models = 0.250755 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 56 components and 0.250755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083963Jy  sigma=0.939868
! Fit after  self-cal, rms=0.083962Jy  sigma=0.939834
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.5444e-06 Jy
! Component: 100  -  total flux cleaned = -5.89919e-05 Jy
! Component: 150  -  total flux cleaned = -0.000110615 Jy
! Component: 200  -  total flux cleaned = -0.000162589 Jy
! Total flux subtracted in 200 components = -0.000162589 Jy
! Clean residual min=-0.011095 max=0.005920 Jy/beam
! Clean residual mean=-0.001722 rms=0.002370 Jy/beam
! Combined flux in latest and established models = 0.250592 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 56 components and 0.250592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083970Jy  sigma=0.939942
! Fit after  self-cal, rms=0.083970Jy  sigma=0.939925
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.003 mas, bmaj=8.368 mas, bpa=-6.088 degrees
! Estimated noise=0.718784 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.003 x 8.368 at -6.088 degrees (North through East)
! Clean map  min=-0.0081471  max=0.22132 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=7.417 mas, bpa=-6.571 degrees
! Estimated noise=1.34952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169643 Jy
! Component: 100  -  total flux cleaned = 0.210908 Jy
! Component: 150  -  total flux cleaned = 0.228379 Jy
! Component: 200  -  total flux cleaned = 0.238287 Jy
! Total flux subtracted in 200 components = 0.238287 Jy
! Clean residual min=-0.008845 max=0.009517 Jy/beam
! Clean residual mean=-0.000090 rms=0.002159 Jy/beam
! Combined flux in latest and established models = 0.238287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.238287 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.003 mas, bmaj=8.368 mas, bpa=-6.088 degrees
! Estimated noise=0.718784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693924 Jy
! Component: 100  -  total flux cleaned = 0.00924098 Jy
! Component: 150  -  total flux cleaned = 0.0102194 Jy
! Component: 200  -  total flux cleaned = 0.0105788 Jy
! Total flux subtracted in 200 components = 0.0105788 Jy
! Clean residual min=-0.009197 max=0.006869 Jy/beam
! Clean residual mean=-0.000717 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 0.248866 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 37 components and 0.248866 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.788 mas, bmaj=13.78 mas, bpa=-10.37 degrees
! Estimated noise=0.907352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227657 Jy
! Component: 100  -  total flux cleaned = 0.00228036 Jy
! Component: 150  -  total flux cleaned = 0.00219405 Jy
! Component: 200  -  total flux cleaned = 0.00211285 Jy
! Total flux subtracted in 200 components = 0.00211285 Jy
! Clean residual min=-0.011531 max=0.006573 Jy/beam
! Clean residual mean=-0.001732 rms=0.002508 Jy/beam
! Combined flux in latest and established models = 0.250978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.73923e-05 Jy
! Component: 100  -  total flux cleaned = -0.000155148 Jy
! Component: 150  -  total flux cleaned = -0.000224818 Jy
! Component: 200  -  total flux cleaned = -0.000295428 Jy
! Total flux subtracted in 200 components = -0.000295428 Jy
! Clean residual min=-0.011405 max=0.006374 Jy/beam
! Clean residual mean=-0.001724 rms=0.002466 Jy/beam
! Combined flux in latest and established models = 0.250683 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.250683 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.003 mas, bmaj=8.368 mas, bpa=-6.088 degrees
! Estimated noise=0.718784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000387498 Jy
! Component: 100  -  total flux cleaned = -0.000323992 Jy
! Component: 150  -  total flux cleaned = -0.000265733 Jy
! Component: 200  -  total flux cleaned = -0.000212078 Jy
! Total flux subtracted in 200 components = -0.000212078 Jy
! Clean residual min=-0.008513 max=0.006485 Jy/beam
! Clean residual mean=-0.000737 rms=0.001795 Jy/beam
! Combined flux in latest and established models = 0.250471 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.250471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084061Jy  sigma=0.941124
! Fit after  self-cal, rms=0.084058Jy  sigma=0.941056
wmodel /d2/scr/pima/rv101_uvs/J1018+0530_S_map.mod
! Writing 52 model components to file: /d2/scr/pima/rv101_uvs/J1018+0530_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J1018+0530_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1018+0530_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J1018+0530_S_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J1018+0530_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00378235 Jy
! Component: 100  -  total flux cleaned = -0.00695498 Jy
! Component: 150  -  total flux cleaned = -0.00816067 Jy
! Component: 200  -  total flux cleaned = -0.0083871 Jy
! Component: 250  -  total flux cleaned = -0.00849571 Jy
! Component: 300  -  total flux cleaned = -0.0086978 Jy
! Component: 350  -  total flux cleaned = -0.00869774 Jy
! Component: 400  -  total flux cleaned = -0.00878827 Jy
! Component: 450  -  total flux cleaned = -0.0091438 Jy
! Component: 500  -  total flux cleaned = -0.00940188 Jy
! Component: 550  -  total flux cleaned = -0.00965124 Jy
! Component: 600  -  total flux cleaned = -0.00997462 Jy
! Component: 650  -  total flux cleaned = -0.0102911 Jy
! Component: 700  -  total flux cleaned = -0.0105235 Jy
! Component: 750  -  total flux cleaned = -0.0109017 Jy
! Component: 800  -  total flux cleaned = -0.0111968 Jy
! Component: 850  -  total flux cleaned = -0.0115575 Jy
! Component: 900  -  total flux cleaned = -0.0119824 Jy
! Component: 950  -  total flux cleaned = -0.0122609 Jy
! Component: 1000  -  total flux cleaned = -0.0126707 Jy
! Component: 1050  -  total flux cleaned = -0.0130724 Jy
! Component: 1100  -  total flux cleaned = -0.0134676 Jy
! Component: 1150  -  total flux cleaned = -0.0138558 Jy
! Component: 1200  -  total flux cleaned = -0.0141731 Jy
! Component: 1250  -  total flux cleaned = -0.0144238 Jy
! Component: 1300  -  total flux cleaned = -0.014855 Jy
! Component: 1350  -  total flux cleaned = -0.0152783 Jy
! Component: 1400  -  total flux cleaned = -0.0155766 Jy
! Component: 1450  -  total flux cleaned = -0.0160472 Jy
! Component: 1500  -  total flux cleaned = -0.0164531 Jy
! Component: 1550  -  total flux cleaned = -0.0171403 Jy
! Component: 1600  -  total flux cleaned = -0.0174785 Jy
! Component: 1650  -  total flux cleaned = -0.0180364 Jy
! Component: 1700  -  total flux cleaned = -0.0185327 Jy
! Component: 1750  -  total flux cleaned = -0.0189691 Jy
! Component: 1800  -  total flux cleaned = -0.0195071 Jy
! Component: 1850  -  total flux cleaned = -0.0200924 Jy
! Component: 1900  -  total flux cleaned = -0.0205131 Jy
! Component: 1950  -  total flux cleaned = -0.0209809 Jy
! Component: 2000  -  total flux cleaned = -0.021495 Jy
! Component: 2050  -  total flux cleaned = -0.0219527 Jy
! Component: 2100  -  total flux cleaned = -0.0224055 Jy
! Component: 2150  -  total flux cleaned = -0.0229533 Jy
! Component: 2200  -  total flux cleaned = -0.0232982 Jy
! Component: 2250  -  total flux cleaned = -0.0237866 Jy
! Component: 2300  -  total flux cleaned = -0.0241737 Jy
! Component: 2350  -  total flux cleaned = -0.0247004 Jy
! Component: 2400  -  total flux cleaned = -0.0251264 Jy
! Component: 2450  -  total flux cleaned = -0.0255955 Jy
! Component: 2500  -  total flux cleaned = -0.0259669 Jy
! Component: 2550  -  total flux cleaned = -0.0261971 Jy
! Component: 2600  -  total flux cleaned = -0.026608 Jy
! Component: 2650  -  total flux cleaned = -0.0269247 Jy
! Component: 2700  -  total flux cleaned = -0.0271046 Jy
! Component: 2750  -  total flux cleaned = -0.0274162 Jy
! Component: 2800  -  total flux cleaned = -0.0277248 Jy
! Component: 2850  -  total flux cleaned = -0.0280305 Jy
! Component: 2900  -  total flux cleaned = -0.0282036 Jy
! Component: 2950  -  total flux cleaned = -0.0284612 Jy
! Component: 3000  -  total flux cleaned = -0.0287592 Jy
! Component: 3050  -  total flux cleaned = -0.0289284 Jy
! Component: 3100  -  total flux cleaned = -0.0290547 Jy
! Component: 3150  -  total flux cleaned = -0.0294288 Jy
! Component: 3200  -  total flux cleaned = -0.0295111 Jy
! Component: 3250  -  total flux cleaned = -0.0296752 Jy
! Component: 3300  -  total flux cleaned = -0.0299593 Jy
! Component: 3350  -  total flux cleaned = -0.0300799 Jy
! Component: 3400  -  total flux cleaned = -0.03032 Jy
! Component: 3450  -  total flux cleaned = -0.0304791 Jy
! Component: 3500  -  total flux cleaned = -0.0307155 Jy
! Component: 3550  -  total flux cleaned = -0.0308725 Jy
! Component: 3600  -  total flux cleaned = -0.0310673 Jy
! Component: 3650  -  total flux cleaned = -0.0312603 Jy
! Component: 3700  -  total flux cleaned = -0.031414 Jy
! Component: 3750  -  total flux cleaned = -0.0316429 Jy
! Component: 3800  -  total flux cleaned = -0.0319084 Jy
! Component: 3850  -  total flux cleaned = -0.032172 Jy
! Component: 3900  -  total flux cleaned = -0.0323965 Jy
! Component: 3950  -  total flux cleaned = -0.0325824 Jy
! Component: 4000  -  total flux cleaned = -0.0327667 Jy
! Component: 4050  -  total flux cleaned = -0.0330241 Jy
! Total flux subtracted in 4096 components = -0.0333161 Jy
! Clean residual min=-0.002061 max=0.002100 Jy/beam
! Clean residual mean=-0.000249 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.217155 Jy
keep
! Adding 337 model components to the UV plane model.
! The established model now contains 389 components and 0.217155 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J1018+0530_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.003 x 8.368 at -6.088 degrees (North through East)
! Clean map  min=-0.0043036  max=0.22127 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1018+0530_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.221267 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000683937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.927302 0.927302 1.8546 3.70921 7.41841 14.8368 29.6737 59.3473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.221 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  323.519 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J1018+0530_S_uvs.log closed on Sat Nov 29 13:52:44 2014