! Started logfile: /d2/scr/pima/rv101_uvs/J1011-3223_S_uvs.log on Sat Nov 29 13:52:33 2014 obs /d2/scr/pima/rv101_uvs/J1011-3223_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J1011-3223_S_uva.fits ! AN table 1: 22 integrations on 21 of 21 possible baselines. ! AN table 2: 22 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.964115 visibilities/baseline/integration-bin. ! Found source: J1011-3223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4836 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J1011-3223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005337Jy sigma=11.308687 ! Fit after self-cal, rms=0.889636Jy sigma=10.024528 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=6.49 mas, bpa=-5.534 degrees ! Estimated noise=1.79634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871147 Jy ! Component: 100 - total flux cleaned = 0.106473 Jy ! Total flux subtracted in 100 components = 0.106473 Jy ! Clean residual min=-0.008269 max=0.009622 Jy/beam ! Clean residual mean=-0.000082 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.106473 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.106473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088994Jy sigma=0.901989 ! Fit after self-cal, rms=0.088970Jy sigma=0.901816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.879 mas, bpa=-4.841 degrees ! Estimated noise=0.948389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00886645 Jy ! Component: 100 - total flux cleaned = 0.0134548 Jy ! Component: 150 - total flux cleaned = 0.0154712 Jy ! Component: 200 - total flux cleaned = 0.0158112 Jy ! Total flux subtracted in 200 components = 0.0158112 Jy ! Clean residual min=-0.004263 max=0.004635 Jy/beam ! Clean residual mean=-0.000033 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.122284 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.122284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088069Jy sigma=0.891577 ! Fit after self-cal, rms=0.088071Jy sigma=0.891103 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.879 at -4.841 degrees (North through East) ! Clean map min=-0.0038976 max=0.10982 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 LA 0.94 MK 1.06 NL 1.05 ! OV 0.96 PT 0.94 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.088071Jy sigma=0.891103 ! Fit after self-cal, rms=0.088261Jy sigma=0.890744 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.9 mas, bpa=-4.912 degrees ! Estimated noise=0.948177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905722 Jy ! Component: 100 - total flux cleaned = 0.000686738 Jy ! Component: 150 - total flux cleaned = 0.000621562 Jy ! Component: 200 - total flux cleaned = 0.000678517 Jy ! Total flux subtracted in 200 components = 0.000678517 Jy ! Clean residual min=-0.004202 max=0.004424 Jy/beam ! Clean residual mean=-0.000016 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.122963 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.122963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088132Jy sigma=0.889767 ! Fit after self-cal, rms=0.088150Jy sigma=0.889639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088150Jy sigma=0.889639 ! Fit after self-cal, rms=0.089680Jy sigma=0.887347 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=7.892 mas, bpa=-5.016 degrees ! Estimated noise=0.963952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237243 Jy ! Component: 100 - total flux cleaned = 0.00253284 Jy ! Component: 150 - total flux cleaned = 0.00258141 Jy ! Component: 200 - total flux cleaned = 0.00258243 Jy ! Total flux subtracted in 200 components = 0.00258243 Jy ! Clean residual min=-0.003939 max=0.004436 Jy/beam ! Clean residual mean=-0.000014 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.125545 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.125545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089581Jy sigma=0.886730 ! Fit after self-cal, rms=0.089601Jy sigma=0.886611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-92.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220925 Jy ! Component: 100 - total flux cleaned = 0.00262758 Jy ! Component: 150 - total flux cleaned = 0.00282035 Jy ! Component: 200 - total flux cleaned = 0.00298936 Jy ! Total flux subtracted in 200 components = 0.00298936 Jy ! Clean residual min=-0.003654 max=0.003454 Jy/beam ! Clean residual mean=-0.000016 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.128535 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.128535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089414Jy sigma=0.884262 ! Fit after self-cal, rms=0.089411Jy sigma=0.884090 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089411Jy sigma=0.884090 ! Fit after self-cal, rms=0.088348Jy sigma=0.879897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=7.853 mas, bpa=-5.176 degrees ! Estimated noise=0.965001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013032 Jy ! Component: 100 - total flux cleaned = 0.00175201 Jy ! Component: 150 - total flux cleaned = 0.00195127 Jy ! Component: 200 - total flux cleaned = 0.00213455 Jy ! Total flux subtracted in 200 components = 0.00213455 Jy ! Clean residual min=-0.003298 max=0.003405 Jy/beam ! Clean residual mean=-0.000044 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.130669 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.130669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088271Jy sigma=0.879220 ! Fit after self-cal, rms=0.088255Jy sigma=0.879057 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372313 Jy ! Component: 100 - total flux cleaned = 0.000413286 Jy ! Component: 150 - total flux cleaned = 0.000488041 Jy ! Component: 200 - total flux cleaned = 0.000593894 Jy ! Total flux subtracted in 200 components = 0.000593894 Jy ! Clean residual min=-0.003269 max=0.003236 Jy/beam ! Clean residual mean=-0.000041 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.131263 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.131263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088219Jy sigma=0.878744 ! Fit after self-cal, rms=0.088227Jy sigma=0.878730 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088227Jy sigma=0.878730 ! Fit after self-cal, rms=0.087765Jy sigma=0.876831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.586 mas, bmaj=22.14 mas, bpa=-2.871 degrees ! Estimated noise=1.24981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136449 Jy ! Component: 100 - total flux cleaned = 0.00165846 Jy ! Component: 150 - total flux cleaned = 0.0017681 Jy ! Component: 200 - total flux cleaned = 0.00186704 Jy ! Total flux subtracted in 200 components = 0.00186704 Jy ! Clean residual min=-0.003191 max=0.002888 Jy/beam ! Clean residual mean=-0.000030 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.13313 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 100 components and 0.13313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087769Jy sigma=0.876798 ! Fit after self-cal, rms=0.087789Jy sigma=0.876709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022098 Jy ! Component: 100 - total flux cleaned = 0.00028871 Jy ! Component: 150 - total flux cleaned = 0.000350503 Jy ! Component: 200 - total flux cleaned = 0.000388734 Jy ! Total flux subtracted in 200 components = 0.000388734 Jy ! Clean residual min=-0.003175 max=0.002962 Jy/beam ! Clean residual mean=-0.000029 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.133519 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.133519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087796Jy sigma=0.876731 ! Fit after self-cal, rms=0.087796Jy sigma=0.876720 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.85 mas, bpa=-5.244 degrees ! Estimated noise=0.963616 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.85 at -5.244 degrees (North through East) ! Clean map min=-0.003111 max=0.10921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=6.502 mas, bpa=-5.98 degrees ! Estimated noise=1.80421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871418 Jy ! Component: 100 - total flux cleaned = 0.108457 Jy ! Component: 150 - total flux cleaned = 0.117172 Jy ! Component: 200 - total flux cleaned = 0.120943 Jy ! Total flux subtracted in 200 components = 0.120943 Jy ! Clean residual min=-0.007903 max=0.007292 Jy/beam ! Clean residual mean=-0.000037 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.120943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.120943 Jy ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.85 mas, bpa=-5.244 degrees ! Estimated noise=0.963616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565492 Jy ! Component: 100 - total flux cleaned = 0.00876985 Jy ! Component: 150 - total flux cleaned = 0.0103162 Jy ! Component: 200 - total flux cleaned = 0.0113254 Jy ! Total flux subtracted in 200 components = 0.0113254 Jy ! Clean residual min=-0.003387 max=0.003426 Jy/beam ! Clean residual mean=-0.000020 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.132269 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 49 components and 0.132269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.586 mas, bmaj=22.14 mas, bpa=-2.871 degrees ! Estimated noise=1.24981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139079 Jy ! Component: 100 - total flux cleaned = 0.00156912 Jy ! Component: 150 - total flux cleaned = 0.00166914 Jy ! Component: 200 - total flux cleaned = 0.00171111 Jy ! Total flux subtracted in 200 components = 0.00171111 Jy ! Clean residual min=-0.003251 max=0.003597 Jy/beam ! Clean residual mean=-0.000027 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.13398 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.75312e-05 Jy ! Component: 100 - total flux cleaned = 3.68202e-05 Jy ! Component: 150 - total flux cleaned = 3.6565e-05 Jy ! Component: 200 - total flux cleaned = 6.50867e-05 Jy ! Total flux subtracted in 200 components = 6.50867e-05 Jy ! Clean residual min=-0.003213 max=0.003382 Jy/beam ! Clean residual mean=-0.000026 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.134045 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.134045 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.85 mas, bpa=-5.244 degrees ! Estimated noise=0.963616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571882 Jy ! Component: 100 - total flux cleaned = -0.000682981 Jy ! Component: 150 - total flux cleaned = -0.000583077 Jy ! Component: 200 - total flux cleaned = -0.000585033 Jy ! Total flux subtracted in 200 components = -0.000585033 Jy ! Clean residual min=-0.003098 max=0.002980 Jy/beam ! Clean residual mean=-0.000014 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.13346 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.13346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087759Jy sigma=0.876328 ! Fit after self-cal, rms=0.087767Jy sigma=0.876189 wmodel /d2/scr/pima/rv101_uvs/J1011-3223_S_map.mod ! Writing 90 model components to file: /d2/scr/pima/rv101_uvs/J1011-3223_S_map.mod wobs /d2/scr/pima/rv101_uvs/J1011-3223_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J1011-3223_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J1011-3223_S_map.win ! wwins: Wrote 4 windows to /d2/scr/pima/rv101_uvs/J1011-3223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000647083 Jy ! Component: 100 - total flux cleaned = -0.000600771 Jy ! Component: 150 - total flux cleaned = -0.000649118 Jy ! Component: 200 - total flux cleaned = -0.000557905 Jy ! Component: 250 - total flux cleaned = -0.000559308 Jy ! Component: 300 - total flux cleaned = -0.000559779 Jy ! Component: 350 - total flux cleaned = -0.00064362 Jy ! Component: 400 - total flux cleaned = -0.000642901 Jy ! Component: 450 - total flux cleaned = -0.000601904 Jy ! Component: 500 - total flux cleaned = -0.000601269 Jy ! Component: 550 - total flux cleaned = -0.000561776 Jy ! Component: 600 - total flux cleaned = -0.000561878 Jy ! Component: 650 - total flux cleaned = -0.000674408 Jy ! Component: 700 - total flux cleaned = -0.000599921 Jy ! Component: 750 - total flux cleaned = -0.000709122 Jy ! Component: 800 - total flux cleaned = -0.000744527 Jy ! Component: 850 - total flux cleaned = -0.000779439 Jy ! Component: 900 - total flux cleaned = -0.000988296 Jy ! Component: 950 - total flux cleaned = -0.000987398 Jy ! Component: 1000 - total flux cleaned = -0.00105522 Jy ! Component: 1050 - total flux cleaned = -0.00115533 Jy ! Component: 1100 - total flux cleaned = -0.00125453 Jy ! Component: 1150 - total flux cleaned = -0.00128755 Jy ! Component: 1200 - total flux cleaned = -0.00128757 Jy ! Component: 1250 - total flux cleaned = -0.00138382 Jy ! Component: 1300 - total flux cleaned = -0.00151049 Jy ! Component: 1350 - total flux cleaned = -0.00166699 Jy ! Component: 1400 - total flux cleaned = -0.00169774 Jy ! Component: 1450 - total flux cleaned = -0.00188129 Jy ! Component: 1500 - total flux cleaned = -0.00194156 Jy ! Component: 1550 - total flux cleaned = -0.00212155 Jy ! Component: 1600 - total flux cleaned = -0.00212175 Jy ! Component: 1650 - total flux cleaned = -0.00221033 Jy ! Component: 1700 - total flux cleaned = -0.00235657 Jy ! Component: 1750 - total flux cleaned = -0.00244306 Jy ! Component: 1800 - total flux cleaned = -0.00252872 Jy ! Component: 1850 - total flux cleaned = -0.00261387 Jy ! Component: 1900 - total flux cleaned = -0.00267018 Jy ! Component: 1950 - total flux cleaned = -0.00272602 Jy ! Component: 2000 - total flux cleaned = -0.00275388 Jy ! Component: 2050 - total flux cleaned = -0.00283654 Jy ! Component: 2100 - total flux cleaned = -0.00291853 Jy ! Component: 2150 - total flux cleaned = -0.0030001 Jy ! Component: 2200 - total flux cleaned = -0.00316192 Jy ! Component: 2250 - total flux cleaned = -0.0032954 Jy ! Component: 2300 - total flux cleaned = -0.00329546 Jy ! Component: 2350 - total flux cleaned = -0.0034539 Jy ! Component: 2400 - total flux cleaned = -0.00355866 Jy ! Component: 2450 - total flux cleaned = -0.00363693 Jy ! Component: 2500 - total flux cleaned = -0.00381768 Jy ! Component: 2550 - total flux cleaned = -0.00384351 Jy ! Component: 2600 - total flux cleaned = -0.00407278 Jy ! Component: 2650 - total flux cleaned = -0.00409786 Jy ! Component: 2700 - total flux cleaned = -0.0042741 Jy ! Component: 2750 - total flux cleaned = -0.00434893 Jy ! Component: 2800 - total flux cleaned = -0.00437389 Jy ! Component: 2850 - total flux cleaned = -0.00457154 Jy ! Component: 2900 - total flux cleaned = -0.0046942 Jy ! Component: 2950 - total flux cleaned = -0.00469432 Jy ! Component: 3000 - total flux cleaned = -0.00486441 Jy ! Component: 3050 - total flux cleaned = -0.00498524 Jy ! Component: 3100 - total flux cleaned = -0.00505744 Jy ! Component: 3150 - total flux cleaned = -0.00515312 Jy ! Component: 3200 - total flux cleaned = -0.00536714 Jy ! Component: 3250 - total flux cleaned = -0.00543825 Jy ! Component: 3300 - total flux cleaned = -0.00553241 Jy ! Component: 3350 - total flux cleaned = -0.00560276 Jy ! Component: 3400 - total flux cleaned = -0.00564928 Jy ! Component: 3450 - total flux cleaned = -0.00574219 Jy ! Component: 3500 - total flux cleaned = -0.00578812 Jy ! Component: 3550 - total flux cleaned = -0.00585672 Jy ! Component: 3600 - total flux cleaned = -0.00585675 Jy ! Component: 3650 - total flux cleaned = -0.00592488 Jy ! Component: 3700 - total flux cleaned = -0.00615033 Jy ! Component: 3750 - total flux cleaned = -0.00621766 Jy ! Component: 3800 - total flux cleaned = -0.00621782 Jy ! Component: 3850 - total flux cleaned = -0.00624007 Jy ! Component: 3900 - total flux cleaned = -0.00632861 Jy ! Component: 3950 - total flux cleaned = -0.00632858 Jy ! Component: 4000 - total flux cleaned = -0.00637249 Jy ! Component: 4050 - total flux cleaned = -0.00648162 Jy ! Total flux subtracted in 4096 components = -0.00654674 Jy ! Clean residual min=-0.001286 max=0.001230 Jy/beam ! Clean residual mean=-0.000011 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.126913 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 379 components and 0.126913 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J1011-3223_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.85 at -5.244 degrees (North through East) ! Clean map min=-0.0025673 max=0.10667 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J1011-3223_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000390795 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09911 1.09911 2.19822 4.39643 8.79286 17.5857 35.1714 70.3429 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.106 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 272.948 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J1011-3223_S_uvs.log closed on Sat Nov 29 13:52:38 2014