! Started logfile: /d2/scr/pima/rv101_uvs/J0915+2933_S_uvs.log on Sat Nov 29 13:52:13 2014 obs /d2/scr/pima/rv101_uvs/J0915+2933_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0915+2933_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.975142 visibilities/baseline/integration-bin. ! Found source: J0915+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5492 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0915+2933_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002181Jy sigma=16.615976 ! Fit after self-cal, rms=0.905375Jy sigma=15.039046 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=5.098 mas, bpa=-3.448 degrees ! Estimated noise=1.14441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743054 Jy ! Component: 100 - total flux cleaned = 0.0906233 Jy ! Total flux subtracted in 100 components = 0.0906233 Jy ! Clean residual min=-0.006520 max=0.006168 Jy/beam ! Clean residual mean=-0.000009 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.0906233 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0906233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071445Jy sigma=0.995603 ! Fit after self-cal, rms=0.071070Jy sigma=0.987965 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=6.524 mas, bpa=0.9057 degrees ! Estimated noise=0.59832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786945 Jy ! Component: 100 - total flux cleaned = 0.0125362 Jy ! Component: 150 - total flux cleaned = 0.0156584 Jy ! Component: 200 - total flux cleaned = 0.017817 Jy ! Total flux subtracted in 200 components = 0.017817 Jy ! Clean residual min=-0.003132 max=0.003604 Jy/beam ! Clean residual mean=-0.000003 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.10844 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 44 components and 0.10844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070096Jy sigma=0.970521 ! Fit after self-cal, rms=0.070067Jy sigma=0.969873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.899 x 6.524 at 0.9057 degrees (North through East) ! Clean map min=-0.0031244 max=0.094881 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.15 LA 1.03 MK 1.11 ! NL 1.07 OV 1.02 PT 1.02 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.02 LA 0.94 MK 1.03 ! NL 1.12 OV 1.00 PT 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.96 KP 1.09 LA 0.94 ! MK 1.00 NL 1.05 OV 1.03 PT 1.03 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.070067Jy sigma=0.969873 ! Fit after self-cal, rms=0.070618Jy sigma=0.966828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=6.584 mas, bpa=1.966 degrees ! Estimated noise=0.605367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233135 Jy ! Component: 100 - total flux cleaned = 0.00309599 Jy ! Component: 150 - total flux cleaned = 0.00358709 Jy ! Component: 200 - total flux cleaned = 0.00380602 Jy ! Total flux subtracted in 200 components = 0.00380602 Jy ! Clean residual min=-0.003044 max=0.003190 Jy/beam ! Clean residual mean=0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.112246 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.112246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070476Jy sigma=0.965885 ! Fit after self-cal, rms=0.070485Jy sigma=0.965784 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070485Jy sigma=0.965784 ! Fit after self-cal, rms=0.069709Jy sigma=0.957722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=6.586 mas, bpa=2.768 degrees ! Estimated noise=0.602471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614107 Jy ! Component: 100 - total flux cleaned = 0.000688122 Jy ! Component: 150 - total flux cleaned = 0.000753768 Jy ! Component: 200 - total flux cleaned = 0.000782395 Jy ! Total flux subtracted in 200 components = 0.000782395 Jy ! Clean residual min=-0.002472 max=0.002745 Jy/beam ! Clean residual mean=0.000003 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.113029 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.113029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069664Jy sigma=0.957258 ! Fit after self-cal, rms=0.069666Jy sigma=0.957129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40402e-06 Jy ! Component: 100 - total flux cleaned = 4.42133e-05 Jy ! Component: 150 - total flux cleaned = 6.41722e-05 Jy ! Component: 200 - total flux cleaned = 0.000101302 Jy ! Total flux subtracted in 200 components = 0.000101302 Jy ! Clean residual min=-0.002479 max=0.002713 Jy/beam ! Clean residual mean=0.000003 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.11313 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.11313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069647Jy sigma=0.956938 ! Fit after self-cal, rms=0.069645Jy sigma=0.956926 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069645Jy sigma=0.956926 ! Fit after self-cal, rms=0.069614Jy sigma=0.956744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=6.594 mas, bpa=3.181 degrees ! Estimated noise=0.602559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383518 Jy ! Component: 100 - total flux cleaned = 0.00043324 Jy ! Component: 150 - total flux cleaned = 0.000475819 Jy ! Component: 200 - total flux cleaned = 0.00047693 Jy ! Total flux subtracted in 200 components = 0.00047693 Jy ! Clean residual min=-0.002377 max=0.002720 Jy/beam ! Clean residual mean=0.000003 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.113607 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.113607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069592Jy sigma=0.956572 ! Fit after self-cal, rms=0.069590Jy sigma=0.956558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54983e-05 Jy ! Component: 100 - total flux cleaned = 3.16894e-05 Jy ! Component: 150 - total flux cleaned = 4.70623e-05 Jy ! Component: 200 - total flux cleaned = 4.74196e-05 Jy ! Total flux subtracted in 200 components = 4.74196e-05 Jy ! Clean residual min=-0.002398 max=0.002704 Jy/beam ! Clean residual mean=0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.113654 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.113654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069580Jy sigma=0.956465 ! Fit after self-cal, rms=0.069578Jy sigma=0.956458 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069578Jy sigma=0.956458 ! Fit after self-cal, rms=0.069521Jy sigma=0.956350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.53 mas, bmaj=11.15 mas, bpa=-4.467 degrees ! Estimated noise=0.699091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560586 Jy ! Component: 100 - total flux cleaned = 0.000689001 Jy ! Component: 150 - total flux cleaned = 0.000755565 Jy ! Component: 200 - total flux cleaned = 0.00079263 Jy ! Total flux subtracted in 200 components = 0.00079263 Jy ! Clean residual min=-0.003350 max=0.003134 Jy/beam ! Clean residual mean=0.000004 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.114447 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.114447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069516Jy sigma=0.956379 ! Fit after self-cal, rms=0.069515Jy sigma=0.956363 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.221e-05 Jy ! Component: 100 - total flux cleaned = 7.99458e-05 Jy ! Component: 150 - total flux cleaned = 0.000121079 Jy ! Component: 200 - total flux cleaned = 0.000128704 Jy ! Total flux subtracted in 200 components = 0.000128704 Jy ! Clean residual min=-0.003360 max=0.003147 Jy/beam ! Clean residual mean=0.000004 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.114576 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.114576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069513Jy sigma=0.956340 ! Fit after self-cal, rms=0.069512Jy sigma=0.956335 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=6.604 mas, bpa=3.441 degrees ! Estimated noise=0.602167 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 6.604 at 3.441 degrees (North through East) ! Clean map min=-0.002321 max=0.094694 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=5.153 mas, bpa=-0.509 degrees ! Estimated noise=1.15706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0751889 Jy ! Component: 100 - total flux cleaned = 0.0921782 Jy ! Component: 150 - total flux cleaned = 0.0989782 Jy ! Component: 200 - total flux cleaned = 0.102115 Jy ! Total flux subtracted in 200 components = 0.102115 Jy ! Clean residual min=-0.006425 max=0.005448 Jy/beam ! Clean residual mean=-0.000003 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.102115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.102115 Jy ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=6.604 mas, bpa=3.441 degrees ! Estimated noise=0.602167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543013 Jy ! Component: 100 - total flux cleaned = 0.00840932 Jy ! Component: 150 - total flux cleaned = 0.0104001 Jy ! Component: 200 - total flux cleaned = 0.0112554 Jy ! Total flux subtracted in 200 components = 0.0112554 Jy ! Clean residual min=-0.002447 max=0.002792 Jy/beam ! Clean residual mean=0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.11337 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.11337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.53 mas, bmaj=11.15 mas, bpa=-4.467 degrees ! Estimated noise=0.699091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927702 Jy ! Component: 100 - total flux cleaned = 0.00108354 Jy ! Component: 150 - total flux cleaned = 0.00118226 Jy ! Component: 200 - total flux cleaned = 0.00122233 Jy ! Total flux subtracted in 200 components = 0.00122233 Jy ! Clean residual min=-0.003247 max=0.003069 Jy/beam ! Clean residual mean=0.000004 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.114593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36818e-05 Jy ! Component: 100 - total flux cleaned = 4.89038e-05 Jy ! Component: 150 - total flux cleaned = 6.23301e-05 Jy ! Component: 200 - total flux cleaned = 6.23751e-05 Jy ! Total flux subtracted in 200 components = 6.23751e-05 Jy ! Clean residual min=-0.003301 max=0.003066 Jy/beam ! Clean residual mean=0.000005 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.114655 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 83 components and 0.114655 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=6.604 mas, bpa=3.441 degrees ! Estimated noise=0.602167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059092 Jy ! Component: 100 - total flux cleaned = -0.000621888 Jy ! Component: 150 - total flux cleaned = -0.000568294 Jy ! Component: 200 - total flux cleaned = -0.000543532 Jy ! Total flux subtracted in 200 components = -0.000543532 Jy ! Clean residual min=-0.002390 max=0.002675 Jy/beam ! Clean residual mean=0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.114112 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.114112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069528Jy sigma=0.956607 ! Fit after self-cal, rms=0.069518Jy sigma=0.956572 wmodel /d2/scr/pima/rv101_uvs/J0915+2933_S_map.mod ! Writing 96 model components to file: /d2/scr/pima/rv101_uvs/J0915+2933_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0915+2933_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0915+2933_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0915+2933_S_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0915+2933_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102971 Jy ! Component: 100 - total flux cleaned = 0.00107341 Jy ! Component: 150 - total flux cleaned = 0.00107434 Jy ! Component: 200 - total flux cleaned = 0.000918945 Jy ! Component: 250 - total flux cleaned = 0.000955839 Jy ! Component: 300 - total flux cleaned = 0.000991341 Jy ! Component: 350 - total flux cleaned = 0.00092067 Jy ! Component: 400 - total flux cleaned = 0.000817919 Jy ! Component: 450 - total flux cleaned = 0.000617206 Jy ! Component: 500 - total flux cleaned = 0.000519588 Jy ! Component: 550 - total flux cleaned = 0.000358985 Jy ! Component: 600 - total flux cleaned = 0.000107669 Jy ! Component: 650 - total flux cleaned = 7.72038e-05 Jy ! Component: 700 - total flux cleaned = -0.000104446 Jy ! Component: 750 - total flux cleaned = -0.000192534 Jy ! Component: 800 - total flux cleaned = -0.000192798 Jy ! Component: 850 - total flux cleaned = -0.000193353 Jy ! Component: 900 - total flux cleaned = -0.000221957 Jy ! Component: 950 - total flux cleaned = -0.00030534 Jy ! Component: 1000 - total flux cleaned = -0.000277685 Jy ! Component: 1050 - total flux cleaned = -0.000277521 Jy ! Component: 1100 - total flux cleaned = -0.000277545 Jy ! Component: 1150 - total flux cleaned = -0.000303651 Jy ! Component: 1200 - total flux cleaned = -0.000406731 Jy ! Component: 1250 - total flux cleaned = -0.000330395 Jy ! Component: 1300 - total flux cleaned = -0.00043074 Jy ! Component: 1350 - total flux cleaned = -0.000529571 Jy ! Component: 1400 - total flux cleaned = -0.000553646 Jy ! Component: 1450 - total flux cleaned = -0.000650587 Jy ! Component: 1500 - total flux cleaned = -0.000793181 Jy ! Component: 1550 - total flux cleaned = -0.000816605 Jy ! Component: 1600 - total flux cleaned = -0.000979391 Jy ! Component: 1650 - total flux cleaned = -0.00102539 Jy ! Component: 1700 - total flux cleaned = -0.00118433 Jy ! Component: 1750 - total flux cleaned = -0.00129675 Jy ! Component: 1800 - total flux cleaned = -0.00142985 Jy ! Component: 1850 - total flux cleaned = -0.00151773 Jy ! Component: 1900 - total flux cleaned = -0.00166964 Jy ! Component: 1950 - total flux cleaned = -0.00177717 Jy ! Component: 2000 - total flux cleaned = -0.00186262 Jy ! Component: 2050 - total flux cleaned = -0.00196814 Jy ! Component: 2100 - total flux cleaned = -0.00205199 Jy ! Component: 2150 - total flux cleaned = -0.00223846 Jy ! Component: 2200 - total flux cleaned = -0.00232081 Jy ! Component: 2250 - total flux cleaned = -0.00246315 Jy ! Component: 2300 - total flux cleaned = -0.00254386 Jy ! Component: 2350 - total flux cleaned = -0.00266386 Jy ! Component: 2400 - total flux cleaned = -0.00270349 Jy ! Component: 2450 - total flux cleaned = -0.00284138 Jy ! Component: 2500 - total flux cleaned = -0.00293882 Jy ! Component: 2550 - total flux cleaned = -0.00299683 Jy ! Component: 2600 - total flux cleaned = -0.00303533 Jy ! Component: 2650 - total flux cleaned = -0.00305443 Jy ! Component: 2700 - total flux cleaned = -0.00313054 Jy ! Component: 2750 - total flux cleaned = -0.00318701 Jy ! Component: 2800 - total flux cleaned = -0.00320591 Jy ! Component: 2850 - total flux cleaned = -0.00320594 Jy ! Component: 2900 - total flux cleaned = -0.00329832 Jy ! Component: 2950 - total flux cleaned = -0.0033533 Jy ! Component: 3000 - total flux cleaned = -0.00338987 Jy ! Component: 3050 - total flux cleaned = -0.00346236 Jy ! Component: 3100 - total flux cleaned = -0.00342637 Jy ! Component: 3150 - total flux cleaned = -0.00344442 Jy ! Component: 3200 - total flux cleaned = -0.00351565 Jy ! Component: 3250 - total flux cleaned = -0.00349777 Jy ! Component: 3300 - total flux cleaned = -0.00342733 Jy ! Component: 3350 - total flux cleaned = -0.00342745 Jy ! Component: 3400 - total flux cleaned = -0.00349716 Jy ! Component: 3450 - total flux cleaned = -0.00344511 Jy ! Component: 3500 - total flux cleaned = -0.00346236 Jy ! Component: 3550 - total flux cleaned = -0.0034966 Jy ! Component: 3600 - total flux cleaned = -0.00349654 Jy ! Component: 3650 - total flux cleaned = -0.00353063 Jy ! Component: 3700 - total flux cleaned = -0.00356438 Jy ! Component: 3750 - total flux cleaned = -0.00354755 Jy ! Component: 3800 - total flux cleaned = -0.00349734 Jy ! Component: 3850 - total flux cleaned = -0.003514 Jy ! Component: 3900 - total flux cleaned = -0.00351392 Jy ! Component: 3950 - total flux cleaned = -0.00351398 Jy ! Component: 4000 - total flux cleaned = -0.00348126 Jy ! Component: 4050 - total flux cleaned = -0.00353011 Jy ! Total flux subtracted in 4096 components = -0.00341628 Jy ! Clean residual min=-0.000968 max=0.000869 Jy/beam ! Clean residual mean=0.000005 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.110695 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 362 components and 0.110695 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0915+2933_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 6.604 at 3.441 degrees (North through East) ! Clean map min=-0.0018133 max=0.094342 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0915+2933_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0943418 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.913367 0.913367 1.82673 3.65347 7.30693 14.6139 29.2277 58.4555 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.094 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 328.455 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0915+2933_S_uvs.log closed on Sat Nov 29 13:52:17 2014