! Started logfile: /d2/scr/pima/rv101_uvs/J0854+2006_X_uvs.log on Sat Nov 29 16:32:10 2014 obs /d2/scr/pima/rv101_uvs/J0854+2006_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_X_uva.fits ! AN table 1: 9 integrations on 36 of 36 possible baselines. ! AN table 2: 9 integrations on 1 of 1 possible baselines. ! AN table 3: 42 integrations on 1 of 1 possible baselines. ! AN table 4: 18 integrations on 1 of 1 possible baselines. ! AN table 5: 9 integrations on 21 of 21 possible baselines. ! AN table 6: 9 integrations on 15 of 15 possible baselines. ! AN table 7: 9 integrations on 1 of 1 possible baselines. ! AN table 8: 9 integrations on 1 of 1 possible baselines. ! AN table 9: 11 integrations on 3 of 3 possible baselines. ! AN table 10: 143 integrations on 3 of 3 possible baselines. ! AN table 11: 11 integrations on 15 of 15 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 10 integrations on 1 of 1 possible baselines. ! AN table 14: 11 integrations on 66 of 66 possible baselines. ! AN table 15: 6 integrations on 1 of 1 possible baselines. ! AN table 16: 11 integrations on 6 of 6 possible baselines. ! AN table 17: 11 integrations on 15 of 15 possible baselines. ! AN table 18: 11 integrations on 3 of 3 possible baselines. ! AN table 19: 11 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.888333 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 10660 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0854+2006_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 84 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 177 telescope corrections were flagged in sub-array 10. ! A total of 17 telescope corrections were flagged in sub-array 11. ! A total of 9 telescope corrections were flagged in sub-array 12. ! A total of 20 telescope corrections were flagged in sub-array 13. ! A total of 48 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 21 telescope corrections were flagged in sub-array 17. ! A total of 9 telescope corrections were flagged in sub-array 18. ! A total of 42 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 84 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 177 telescope corrections were flagged in sub-array 10. ! A total of 17 telescope corrections were flagged in sub-array 11. ! A total of 9 telescope corrections were flagged in sub-array 12. ! A total of 20 telescope corrections were flagged in sub-array 13. ! A total of 48 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 13 telescope corrections were flagged in sub-array 16. ! A total of 21 telescope corrections were flagged in sub-array 17. ! A total of 9 telescope corrections were flagged in sub-array 18. ! A total of 42 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 84 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 33 telescope corrections were flagged in sub-array 9. ! A total of 429 telescope corrections were flagged in sub-array 10. ! A total of 28 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 20 telescope corrections were flagged in sub-array 13. ! A total of 59 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 23 telescope corrections were flagged in sub-array 16. ! A total of 31 telescope corrections were flagged in sub-array 17. ! A total of 33 telescope corrections were flagged in sub-array 18. ! A total of 50 telescope corrections were flagged in sub-array 19. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 84 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 33 telescope corrections were flagged in sub-array 9. ! A total of 429 telescope corrections were flagged in sub-array 10. ! A total of 28 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 20 telescope corrections were flagged in sub-array 13. ! A total of 59 telescope corrections were flagged in sub-array 14. ! A total of 12 telescope corrections were flagged in sub-array 15. ! A total of 23 telescope corrections were flagged in sub-array 16. ! A total of 31 telescope corrections were flagged in sub-array 17. ! A total of 33 telescope corrections were flagged in sub-array 18. ! A total of 50 telescope corrections were flagged in sub-array 19. ! ! Fit before self-cal, rms=3.915991Jy sigma=13.593344 ! Fit after self-cal, rms=2.828959Jy sigma=9.713597 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.5969 mas, bmaj=1.117 mas, bpa=-9.128 degrees ! Estimated noise=3.42886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69213 Jy ! Component: 100 - total flux cleaned = 3.42609 Jy ! Total flux subtracted in 100 components = 3.42609 Jy ! Clean residual min=-0.081242 max=0.324558 Jy/beam ! Clean residual mean=0.001370 rms=0.021712 Jy/beam ! Combined flux in latest and established models = 3.42609 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 3.42609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.802018Jy sigma=2.461731 ! Fit after self-cal, rms=0.798692Jy sigma=2.450304 ! Inverting map ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.354537 Jy ! Component: 100 - total flux cleaned = 0.530592 Jy ! Total flux subtracted in 100 components = 0.530592 Jy ! Clean residual min=-0.061906 max=0.124121 Jy/beam ! Clean residual mean=0.000823 rms=0.014011 Jy/beam ! Combined flux in latest and established models = 3.95668 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 3.95668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544007Jy sigma=1.576611 ! Fit after self-cal, rms=0.542277Jy sigma=1.570804 ! Inverting map ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122681 Jy ! Component: 100 - total flux cleaned = 0.195889 Jy ! Total flux subtracted in 100 components = 0.195889 Jy ! Clean residual min=-0.054286 max=0.058950 Jy/beam ! Clean residual mean=0.000620 rms=0.012582 Jy/beam ! Combined flux in latest and established models = 4.15257 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 4.15257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495737Jy sigma=1.417193 ! Fit after self-cal, rms=0.492068Jy sigma=1.405062 ! Inverting map ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6877 mas, bmaj=1.24 mas, bpa=-9.177 degrees ! Estimated noise=2.89513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871016 Jy ! Component: 100 - total flux cleaned = 0.137513 Jy ! Component: 150 - total flux cleaned = 0.169106 Jy ! Component: 200 - total flux cleaned = 0.189888 Jy ! Total flux subtracted in 200 components = 0.189888 Jy ! Clean residual min=-0.049321 max=0.061470 Jy/beam ! Clean residual mean=0.001793 rms=0.012122 Jy/beam ! Combined flux in latest and established models = 4.34245 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 4.34245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468649Jy sigma=1.356875 ! Fit after self-cal, rms=0.466322Jy sigma=1.349373 ! Inverting map ! Your choice of large map pixels excluded 0.927% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6877 x 1.24 at -9.177 degrees (North through East) ! Clean map min=-0.046182 max=3.5512 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.01 LA 1.04 MK 1.00 ! NL 0.99 NY 0.99 OV 0.98 PT 1.02 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 LA 1.03 MK 1.00 NL 1.08 ! NY 0.98 OV 0.98 PT 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 LA 1.05 MK 1.03 NY 0.98 ! OV 0.98 PT 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 252 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.05 MA 1.02 NY 1.01 ON 0.81 ! SC 1.07 WF 0.84 ! ! A total of 18 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! FD 1.03 HN 1.04 KP 1.00* LA 1.05 ! MA 1.03 NL 0.99 NY 0.97 ON 0.80 ! OV 0.98 PT 1.02 SC 1.02 WF 0.82 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 1.04 NY 0.96 ON 0.86 WF 0.83 ! ! A total of 3 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! HN 1.02 MA 1.07 NL 0.99 NY 0.98 ! ON 0.85 SC 0.98 ! ! A total of 24 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.04 HN 1.03 KP 1.00* LA 1.08 ! MK 1.02 NL 0.99 NY 1.00 OV 0.97 ! PT 1.03 SC 1.00 WF 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.03 LA 0.99 MK 1.00 ! NL 1.01 NY 0.97 OV 0.97 PT 0.91 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 LA 1.00 MK 1.01 NL 1.09 ! NY 0.94 OV 0.97 PT 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 LA 1.00 MK 1.05 NY 0.96 ! OV 0.97 PT 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 252 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.07 MA 0.98 NY 0.99 ON 0.81 ! SC 1.12 WF 0.86 ! ! A total of 18 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! FD 1.02 HN 1.06 KP 1.00* LA 1.00 ! MA 0.98 NL 1.02 NY 0.95 ON 0.82 ! OV 0.97 PT 0.93 SC 1.04 WF 0.85 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 0.97 NY 0.95 ON 0.85 WF 0.84 ! ! A total of 3 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! HN 1.04 MA 1.02 NL 0.97 NY 0.94 ! ON 0.88 SC 1.04 ! ! A total of 24 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.04 HN 1.06 KP 1.00* LA 1.04 ! MK 1.02 NL 1.02 NY 0.99 OV 0.96 ! PT 0.93 SC 1.05 WF 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.04 LA 1.04 MK 1.00 ! NL 1.04 NY 1.00* OV 1.05 PT 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 LA 1.04 MK 1.01 NL 1.14 ! NY 1.00* OV 1.04 PT 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 LA 1.06 MK 1.02 NY 1.00* ! OV 1.04 PT 0.94 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.12 MA 1.01 NY 1.00* ON 0.97 ! SC 1.08 WF 0.88 ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! FD 1.03 HN 1.10 KP 1.00* LA 1.07 ! MA 1.10 NL 1.04 NY 1.00* ON 0.96 ! OV 1.04 PT 0.93 SC 1.01 WF 0.87 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.08 MA 1.17 NL 1.03 NY 1.00* ! ON 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.02 HN 1.09 KP 1.00* LA 1.13 ! MK 1.00 NL 1.03 NY 1.00* OV 1.05 ! PT 0.92 SC 1.00 WF 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.05 LA 1.03 MK 1.04 ! NL 1.06 NY 1.00* OV 1.01 PT 0.92 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.06 LA 1.05 MK 1.05 NL 1.15 ! NY 1.00* OV 0.99 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.10 LA 1.05 MK 1.06 NY 1.00* ! OV 1.01 PT 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! HN 1.11 MA 1.11 NY 1.00* ON 1.02 ! SC 1.09 WF 1.00 ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! FD 1.05 HN 1.10 KP 1.00* LA 1.05 ! MA 1.15 NL 1.06 NY 1.00* ON 1.02 ! OV 1.01 PT 0.97 SC 1.04 WF 0.96 ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.08 MA 1.15 NL 1.05 NY 1.00* ! ON 1.08 SC 1.01 ! ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.06 HN 1.08 KP 1.00* LA 1.09 ! MK 1.06 NL 1.06 NY 1.00* OV 1.02 ! PT 0.94 SC 1.01 WF 0.98 ! ! ! Fit before self-cal, rms=0.466322Jy sigma=1.349373 ! Fit after self-cal, rms=0.193597Jy sigma=0.586211 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6741 mas, bmaj=1.245 mas, bpa=-8.581 degrees ! Estimated noise=3.02077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043761 Jy ! Component: 100 - total flux cleaned = 0.0654255 Jy ! Component: 150 - total flux cleaned = 0.0720713 Jy ! Component: 200 - total flux cleaned = 0.0748554 Jy ! Total flux subtracted in 200 components = 0.0748554 Jy ! Clean residual min=-0.013119 max=0.015333 Jy/beam ! Clean residual mean=0.000703 rms=0.003066 Jy/beam ! Combined flux in latest and established models = 4.41731 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 4.41731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181107Jy sigma=0.550607 ! Fit after self-cal, rms=0.178361Jy sigma=0.542401 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178361Jy sigma=0.542401 ! Fit after self-cal, rms=0.175331Jy sigma=0.532275 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6741 mas, bmaj=1.244 mas, bpa=-8.57 degrees ! Estimated noise=3.02371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241639 Jy ! Component: 100 - total flux cleaned = 0.0380189 Jy ! Component: 150 - total flux cleaned = 0.0427363 Jy ! Component: 200 - total flux cleaned = 0.0448625 Jy ! Total flux subtracted in 200 components = 0.0448625 Jy ! Clean residual min=-0.010479 max=0.010842 Jy/beam ! Clean residual mean=0.000430 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 4.46217 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 4.46217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170964Jy sigma=0.519927 ! Fit after self-cal, rms=0.169913Jy sigma=0.516948 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066414 Jy ! Component: 100 - total flux cleaned = 0.00805124 Jy ! Component: 150 - total flux cleaned = 0.0092134 Jy ! Component: 200 - total flux cleaned = 0.00979957 Jy ! Total flux subtracted in 200 components = 0.00979957 Jy ! Clean residual min=-0.010921 max=0.009588 Jy/beam ! Clean residual mean=0.000379 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 4.47197 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 4.47197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168982Jy sigma=0.514509 ! Fit after self-cal, rms=0.168719Jy sigma=0.513979 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168719Jy sigma=0.513979 ! Fit after self-cal, rms=0.167070Jy sigma=0.508575 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6742 mas, bmaj=1.244 mas, bpa=-8.599 degrees ! Estimated noise=3.02569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119933 Jy ! Component: 100 - total flux cleaned = 0.0194804 Jy ! Component: 150 - total flux cleaned = 0.0216549 Jy ! Component: 200 - total flux cleaned = 0.0228702 Jy ! Total flux subtracted in 200 components = 0.0228702 Jy ! Clean residual min=-0.008205 max=0.008534 Jy/beam ! Clean residual mean=0.000213 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 4.49484 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 80 components and 4.49484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165914Jy sigma=0.505071 ! Fit after self-cal, rms=0.165619Jy sigma=0.504272 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 44.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688401 Jy ! Component: 100 - total flux cleaned = 0.00994164 Jy ! Component: 150 - total flux cleaned = 0.0118377 Jy ! Component: 200 - total flux cleaned = 0.0130552 Jy ! Total flux subtracted in 200 components = 0.0130552 Jy ! Clean residual min=-0.007655 max=0.007678 Jy/beam ! Clean residual mean=0.000182 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 4.5079 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 4.5079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165103Jy sigma=0.502610 ! Fit after self-cal, rms=0.165033Jy sigma=0.502415 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165033Jy sigma=0.502415 ! Fit after self-cal, rms=0.164528Jy sigma=0.501003 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=2.175 mas, bmaj=2.774 mas, bpa=-12.32 degrees ! Estimated noise=4.71297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012369 Jy ! Component: 100 - total flux cleaned = 0.0140005 Jy ! Component: 150 - total flux cleaned = 0.0148839 Jy ! Component: 200 - total flux cleaned = 0.0151165 Jy ! Total flux subtracted in 200 components = 0.0151165 Jy ! Clean residual min=-0.009526 max=0.008810 Jy/beam ! Clean residual mean=0.000302 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 4.52301 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 4.52301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164192Jy sigma=0.500312 ! Fit after self-cal, rms=0.164048Jy sigma=0.499688 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167625 Jy ! Component: 100 - total flux cleaned = 0.00199257 Jy ! Component: 150 - total flux cleaned = 0.00201199 Jy ! Component: 200 - total flux cleaned = 0.00201168 Jy ! Total flux subtracted in 200 components = 0.00201168 Jy ! Clean residual min=-0.008825 max=0.008559 Jy/beam ! Clean residual mean=0.000266 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 4.52502 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 4.52502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163988Jy sigma=0.499756 ! Fit after self-cal, rms=0.163949Jy sigma=0.499553 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6743 mas, bmaj=1.244 mas, bpa=-8.626 degrees ! Estimated noise=3.02666 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6743 x 1.244 at -8.626 degrees (North through East) ! Clean map min=-0.006387 max=3.5168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163949Jy sigma=0.499553 ! Fit after self-cal, rms=0.150275Jy sigma=0.429176 ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6744 mas, bmaj=1.244 mas, bpa=-8.655 degrees ! Estimated noise=3.02653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434131 Jy ! Component: 100 - total flux cleaned = 0.00632108 Jy ! Component: 150 - total flux cleaned = 0.00695783 Jy ! Component: 200 - total flux cleaned = 0.00743646 Jy ! Total flux subtracted in 200 components = 0.00743646 Jy ! Clean residual min=-0.006665 max=0.006636 Jy/beam ! Clean residual mean=0.000058 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 4.53246 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 4.53246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150105Jy sigma=0.428304 ! Fit after self-cal, rms=0.150074Jy sigma=0.428233 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Added new window around map position (-23.8, 12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506889 Jy ! Component: 100 - total flux cleaned = 0.00545116 Jy ! Component: 150 - total flux cleaned = 0.00566668 Jy ! Component: 200 - total flux cleaned = 0.00556725 Jy ! Total flux subtracted in 200 components = 0.00556725 Jy ! Clean residual min=-0.006529 max=0.006587 Jy/beam ! Clean residual mean=0.000037 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 4.53803 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 4.53803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149815Jy sigma=0.427093 ! Fit after self-cal, rms=0.149785Jy sigma=0.427002 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Added new window around map position (-28.4, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514114 Jy ! Component: 100 - total flux cleaned = 0.00601529 Jy ! Component: 150 - total flux cleaned = 0.00687532 Jy ! Component: 200 - total flux cleaned = 0.00717247 Jy ! Total flux subtracted in 200 components = 0.00717247 Jy ! Clean residual min=-0.006699 max=0.006243 Jy/beam ! Clean residual mean=0.000018 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 4.5452 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 150 components and 4.5452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149463Jy sigma=0.426241 ! Fit after self-cal, rms=0.149429Jy sigma=0.426150 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149429Jy sigma=0.426150 ! Fit after self-cal, rms=0.149335Jy sigma=0.425719 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.5871 mas, bmaj=1.122 mas, bpa=-9.086 degrees ! Estimated noise=3.59691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67483 Jy ! Component: 100 - total flux cleaned = 3.40764 Jy ! Component: 150 - total flux cleaned = 3.76987 Jy ! Component: 200 - total flux cleaned = 3.96832 Jy ! Total flux subtracted in 200 components = 3.96832 Jy ! Clean residual min=-0.034810 max=0.104861 Jy/beam ! Clean residual mean=0.000704 rms=0.009133 Jy/beam ! Combined flux in latest and established models = 3.96832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 3.96832 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6744 mas, bmaj=1.244 mas, bpa=-8.675 degrees ! Estimated noise=3.02644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185374 Jy ! Component: 100 - total flux cleaned = 0.297682 Jy ! Component: 150 - total flux cleaned = 0.372144 Jy ! Component: 200 - total flux cleaned = 0.423914 Jy ! Total flux subtracted in 200 components = 0.423914 Jy ! Clean residual min=-0.013107 max=0.028795 Jy/beam ! Clean residual mean=0.000756 rms=0.003620 Jy/beam ! Combined flux in latest and established models = 4.39224 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 46 components and 4.39223 Jy ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Added new window around map position (-1.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367388 Jy ! Component: 100 - total flux cleaned = 0.0631072 Jy ! Component: 150 - total flux cleaned = 0.0822128 Jy ! Component: 200 - total flux cleaned = 0.0963394 Jy ! Total flux subtracted in 200 components = 0.0963394 Jy ! Clean residual min=-0.007902 max=0.011820 Jy/beam ! Clean residual mean=0.000261 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 4.48857 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 70 components and 4.48858 Jy ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Added new window around map position (-2.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122875 Jy ! Component: 100 - total flux cleaned = 0.0219076 Jy ! Component: 150 - total flux cleaned = 0.0299528 Jy ! Component: 200 - total flux cleaned = 0.0367571 Jy ! Total flux subtracted in 200 components = 0.0367571 Jy ! Clean residual min=-0.007092 max=0.006781 Jy/beam ! Clean residual mean=0.000104 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 4.52533 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 4.52533 Jy ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=2.173 mas, bmaj=2.772 mas, bpa=-12.36 degrees ! Estimated noise=4.71579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102997 Jy ! Component: 100 - total flux cleaned = 0.0159676 Jy ! Component: 150 - total flux cleaned = 0.0192282 Jy ! Component: 200 - total flux cleaned = 0.0197192 Jy ! Total flux subtracted in 200 components = 0.0197192 Jy ! Clean residual min=-0.007628 max=0.006874 Jy/beam ! Clean residual mean=0.000059 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 4.54505 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411844 Jy ! Component: 100 - total flux cleaned = 0.000873507 Jy ! Component: 150 - total flux cleaned = 0.00104766 Jy ! Component: 200 - total flux cleaned = 0.00128926 Jy ! Total flux subtracted in 200 components = 0.00128926 Jy ! Clean residual min=-0.007549 max=0.006813 Jy/beam ! Clean residual mean=0.000039 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 4.54634 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 123 components and 4.54634 Jy ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! Estimated beam: bmin=0.6744 mas, bmaj=1.244 mas, bpa=-8.675 degrees ! Estimated noise=3.02644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190721 Jy ! Component: 100 - total flux cleaned = 0.00190515 Jy ! Component: 150 - total flux cleaned = 0.00216886 Jy ! Component: 200 - total flux cleaned = 0.00253728 Jy ! Total flux subtracted in 200 components = 0.00253728 Jy ! Clean residual min=-0.006640 max=0.006451 Jy/beam ! Clean residual mean=0.000004 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 4.54888 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 4.54888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149152Jy sigma=0.425485 ! Fit after self-cal, rms=0.149039Jy sigma=0.424712 wmodel /d2/scr/pima/rv101_uvs/J0854+2006_X_map.mod ! Writing 138 model components to file: /d2/scr/pima/rv101_uvs/J0854+2006_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0854+2006_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0854+2006_X_map.win ! wwins: Wrote 8 windows to /d2/scr/pima/rv101_uvs/J0854+2006_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000730961 Jy ! Component: 100 - total flux cleaned = -0.00127921 Jy ! Component: 150 - total flux cleaned = -0.00180241 Jy ! Component: 200 - total flux cleaned = -0.00211036 Jy ! Component: 250 - total flux cleaned = -0.00230956 Jy ! Component: 300 - total flux cleaned = -0.00269909 Jy ! Component: 350 - total flux cleaned = -0.00289037 Jy ! Component: 400 - total flux cleaned = -0.00298393 Jy ! Component: 450 - total flux cleaned = -0.00279813 Jy ! Component: 500 - total flux cleaned = -0.00289053 Jy ! Component: 550 - total flux cleaned = -0.0026164 Jy ! Component: 600 - total flux cleaned = -0.00252769 Jy ! Component: 650 - total flux cleaned = -0.00243828 Jy ! Component: 700 - total flux cleaned = -0.00243925 Jy ! Component: 750 - total flux cleaned = -0.00252641 Jy ! Component: 800 - total flux cleaned = -0.0025252 Jy ! Component: 850 - total flux cleaned = -0.00269535 Jy ! Component: 900 - total flux cleaned = -0.00269412 Jy ! Component: 950 - total flux cleaned = -0.00260985 Jy ! Component: 1000 - total flux cleaned = -0.00236062 Jy ! Component: 1050 - total flux cleaned = -0.00260887 Jy ! Component: 1100 - total flux cleaned = -0.00269043 Jy ! Component: 1150 - total flux cleaned = -0.00261006 Jy ! Component: 1200 - total flux cleaned = -0.0029314 Jy ! Component: 1250 - total flux cleaned = -0.00253239 Jy ! Component: 1300 - total flux cleaned = -0.00261117 Jy ! Component: 1350 - total flux cleaned = -0.00276816 Jy ! Component: 1400 - total flux cleaned = -0.00261247 Jy ! Component: 1450 - total flux cleaned = -0.00284498 Jy ! Component: 1500 - total flux cleaned = -0.00276791 Jy ! Component: 1550 - total flux cleaned = -0.00284378 Jy ! Component: 1600 - total flux cleaned = -0.00314609 Jy ! Component: 1650 - total flux cleaned = -0.00314609 Jy ! Component: 1700 - total flux cleaned = -0.00292207 Jy ! Component: 1750 - total flux cleaned = -0.00314367 Jy ! Component: 1800 - total flux cleaned = -0.00292427 Jy ! Component: 1850 - total flux cleaned = -0.00321643 Jy ! Component: 1900 - total flux cleaned = -0.00321699 Jy ! Component: 1950 - total flux cleaned = -0.00321717 Jy ! Component: 2000 - total flux cleaned = -0.00364782 Jy ! Component: 2050 - total flux cleaned = -0.00386087 Jy ! Component: 2100 - total flux cleaned = -0.00379073 Jy ! Component: 2150 - total flux cleaned = -0.00400107 Jy ! Component: 2200 - total flux cleaned = -0.00421032 Jy ! Component: 2250 - total flux cleaned = -0.00414135 Jy ! Component: 2300 - total flux cleaned = -0.00427952 Jy ! Component: 2350 - total flux cleaned = -0.00448431 Jy ! Component: 2400 - total flux cleaned = -0.00434776 Jy ! Component: 2450 - total flux cleaned = -0.00441505 Jy ! Component: 2500 - total flux cleaned = -0.00441563 Jy ! Component: 2550 - total flux cleaned = -0.00434871 Jy ! Component: 2600 - total flux cleaned = -0.00448226 Jy ! Component: 2650 - total flux cleaned = -0.00441513 Jy ! Component: 2700 - total flux cleaned = -0.0046132 Jy ! Component: 2750 - total flux cleaned = -0.00487525 Jy ! Component: 2800 - total flux cleaned = -0.00454893 Jy ! Component: 2850 - total flux cleaned = -0.00474386 Jy ! Component: 2900 - total flux cleaned = -0.00487304 Jy ! Component: 2950 - total flux cleaned = -0.00474458 Jy ! Component: 3000 - total flux cleaned = -0.00480871 Jy ! Component: 3050 - total flux cleaned = -0.00455469 Jy ! Component: 3100 - total flux cleaned = -0.0046814 Jy ! Component: 3150 - total flux cleaned = -0.00505952 Jy ! Component: 3200 - total flux cleaned = -0.0048093 Jy ! Component: 3250 - total flux cleaned = -0.00487141 Jy ! Component: 3300 - total flux cleaned = -0.00487194 Jy ! Component: 3350 - total flux cleaned = -0.00480974 Jy ! Component: 3400 - total flux cleaned = -0.00493224 Jy ! Component: 3450 - total flux cleaned = -0.00487138 Jy ! Component: 3500 - total flux cleaned = -0.00493236 Jy ! Component: 3550 - total flux cleaned = -0.00481117 Jy ! Component: 3600 - total flux cleaned = -0.00481125 Jy ! Component: 3650 - total flux cleaned = -0.00499108 Jy ! Component: 3700 - total flux cleaned = -0.00481223 Jy ! Component: 3750 - total flux cleaned = -0.00481243 Jy ! Component: 3800 - total flux cleaned = -0.00487141 Jy ! Component: 3850 - total flux cleaned = -0.00481257 Jy ! Component: 3900 - total flux cleaned = -0.00487132 Jy ! Component: 3950 - total flux cleaned = -0.00498791 Jy ! Component: 4000 - total flux cleaned = -0.00475585 Jy ! Component: 4050 - total flux cleaned = -0.00469733 Jy ! Total flux subtracted in 4096 components = -0.00446737 Jy ! Clean residual min=-0.003792 max=0.002944 Jy/beam ! Clean residual mean=-0.000006 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 4.54441 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 477 components and 4.54441 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0854+2006_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6744 x 1.244 at -8.675 degrees (North through East) ! Clean map min=-0.0049443 max=3.5197 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.5197 invert ! Inverting map ! Your choice of large map pixels excluded 0.955% of the data. ! The x-axis pixel size should ideally be below 0.1931 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00096032 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0818523 0.0818523 0.163705 0.327409 0.654818 1.30964 2.61927 5.23855 10.4771 20.9542 41.9084 83.8168 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.519 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3665.14 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0854+2006_X_uvs.log closed on Sat Nov 29 16:32:16 2014