! Started logfile: /d2/scr/pima/rv101_uvs/J0854+2006_S_uvs.log on Sat Nov 29 13:51:59 2014 obs /d2/scr/pima/rv101_uvs/J0854+2006_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_S_uva.fits ! AN table 1: 2 integrations on 36 of 36 possible baselines. ! AN table 2: 2 integrations on 1 of 1 possible baselines. ! AN table 3: 10 integrations on 1 of 1 possible baselines. ! AN table 4: 4 integrations on 1 of 1 possible baselines. ! AN table 5: 2 integrations on 21 of 21 possible baselines. ! AN table 6: 2 integrations on 15 of 15 possible baselines. ! AN table 7: 2 integrations on 1 of 1 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 2 integrations on 3 of 3 possible baselines. ! AN table 10: 26 integrations on 3 of 3 possible baselines. ! AN table 11: 2 integrations on 15 of 15 possible baselines. ! AN table 12: 2 integrations on 3 of 3 possible baselines. ! AN table 13: 2 integrations on 1 of 1 possible baselines. ! AN table 14: 2 integrations on 66 of 66 possible baselines. ! AN table 15: 1 integrations on 1 of 1 possible baselines. ! AN table 16: 2 integrations on 6 of 6 possible baselines. ! AN table 17: 2 integrations on 15 of 15 possible baselines. ! AN table 18: 2 integrations on 3 of 3 possible baselines. ! AN table 19: 2 integrations on 55 of 55 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2308 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0854+2006_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 24 telescope corrections were flagged in sub-array 10. ! A total of 2 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 2 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! A total of 2 telescope corrections were flagged in sub-array 16. ! A total of 2 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 72 telescope corrections were flagged in sub-array 10. ! A total of 2 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! A total of 2 telescope corrections were flagged in sub-array 16. ! A total of 2 telescope corrections were flagged in sub-array 17. ! ! Fit before self-cal, rms=3.145889Jy sigma=12.397055 ! Fit after self-cal, rms=2.181729Jy sigma=7.242232 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=3.433 mas, bpa=-8.384 degrees ! Estimated noise=4.47612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73379 Jy ! Component: 100 - total flux cleaned = 2.2211 Jy ! Total flux subtracted in 100 components = 2.2211 Jy ! Clean residual min=-0.089075 max=0.237098 Jy/beam ! Clean residual mean=-0.000548 rms=0.022655 Jy/beam ! Combined flux in latest and established models = 2.2211 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 2.2211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.511750Jy sigma=3.300994 ! Fit after self-cal, rms=1.511414Jy sigma=3.298711 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.286204 Jy ! Component: 100 - total flux cleaned = 0.465073 Jy ! Total flux subtracted in 100 components = 0.465073 Jy ! Clean residual min=-0.077840 max=0.093860 Jy/beam ! Clean residual mean=-0.000764 rms=0.018378 Jy/beam ! Combined flux in latest and established models = 2.68618 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 2.68618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.402095Jy sigma=2.739275 ! Fit after self-cal, rms=1.401622Jy sigma=2.735797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=3.994 mas, bpa=-10.13 degrees ! Estimated noise=3.60819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881471 Jy ! Component: 100 - total flux cleaned = 0.125223 Jy ! Component: 150 - total flux cleaned = 0.132008 Jy ! Component: 200 - total flux cleaned = 0.135342 Jy ! Total flux subtracted in 200 components = 0.135342 Jy ! Clean residual min=-0.094773 max=0.055803 Jy/beam ! Clean residual mean=-0.010421 rms=0.015757 Jy/beam ! Combined flux in latest and established models = 2.82152 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 2.82152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.382603Jy sigma=2.690124 ! Fit after self-cal, rms=1.382437Jy sigma=2.688453 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 3.994 at -10.13 degrees (North through East) ! Clean map min=-0.080847 max=2.2553 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.03 LA 1.03 MK 1.06 ! NL 1.01 NY 1.06 OV 1.00 PT 1.02 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.98 LA 1.07 MK 0.88 NL 1.08 ! NY 1.10 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.03 LA 1.07 MK 0.89 NY 1.13 ! OV 1.02 PT 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.92 LA 0.95 MK 1.01 ! NL 1.04 NY 1.06 OV 0.98 PT 1.02 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 LA 0.96 MK 0.89 NL 1.10 ! NY 1.10 OV 1.01 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.09 LA 0.98 MK 0.86 NY 1.10 ! OV 1.03 PT 1.06 ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* LA 1.00* MK 1.00* NY 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! FD 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 17: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 19: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! ! Fit before self-cal, rms=1.382437Jy sigma=2.688453 ! Fit after self-cal, rms=0.977913Jy sigma=2.669769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=4.083 mas, bpa=-11.37 degrees ! Estimated noise=3.60266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0290931 Jy ! Component: 100 - total flux cleaned = -0.0333528 Jy ! Component: 150 - total flux cleaned = -0.0333374 Jy ! Component: 200 - total flux cleaned = -0.0327351 Jy ! Total flux subtracted in 200 components = -0.0327351 Jy ! Clean residual min=-0.086867 max=0.060755 Jy/beam ! Clean residual mean=-0.010712 rms=0.015398 Jy/beam ! Combined flux in latest and established models = 2.78878 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 2.78878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.975821Jy sigma=2.641375 ! Fit after self-cal, rms=0.975723Jy sigma=2.640690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.975723Jy sigma=2.640690 ! Fit after self-cal, rms=0.975656Jy sigma=2.639137 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=4.085 mas, bpa=-11.45 degrees ! Estimated noise=3.59827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125657 Jy ! Component: 100 - total flux cleaned = -0.000795573 Jy ! Component: 150 - total flux cleaned = -0.000360678 Jy ! Component: 200 - total flux cleaned = -0.000339207 Jy ! Total flux subtracted in 200 components = -0.000339207 Jy ! Clean residual min=-0.085062 max=0.058604 Jy/beam ! Clean residual mean=-0.010686 rms=0.015241 Jy/beam ! Combined flux in latest and established models = 2.78844 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 2.78844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974575Jy sigma=2.634501 ! Fit after self-cal, rms=0.974540Jy sigma=2.634363 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936756 Jy ! Component: 100 - total flux cleaned = 0.000915457 Jy ! Component: 150 - total flux cleaned = 0.00092519 Jy ! Component: 200 - total flux cleaned = 0.00091533 Jy ! Total flux subtracted in 200 components = 0.00091533 Jy ! Clean residual min=-0.084359 max=0.058178 Jy/beam ! Clean residual mean=-0.010697 rms=0.015216 Jy/beam ! Combined flux in latest and established models = 2.78936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 2.78936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974127Jy sigma=2.632253 ! Fit after self-cal, rms=0.974104Jy sigma=2.632163 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974104Jy sigma=2.632163 ! Fit after self-cal, rms=0.974150Jy sigma=2.631892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=4.082 mas, bpa=-11.42 degrees ! Estimated noise=3.59626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15866e-05 Jy ! Component: 100 - total flux cleaned = 3.28821e-05 Jy ! Component: 150 - total flux cleaned = 0.000366895 Jy ! Component: 200 - total flux cleaned = 0.000361746 Jy ! Total flux subtracted in 200 components = 0.000361746 Jy ! Clean residual min=-0.083890 max=0.057794 Jy/beam ! Clean residual mean=-0.010695 rms=0.015185 Jy/beam ! Combined flux in latest and established models = 2.78972 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 2.78972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.973647Jy sigma=2.630549 ! Fit after self-cal, rms=0.973628Jy sigma=2.630495 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.422e-05 Jy ! Component: 100 - total flux cleaned = 0.000327218 Jy ! Component: 150 - total flux cleaned = 0.000324651 Jy ! Component: 200 - total flux cleaned = 0.000325482 Jy ! Total flux subtracted in 200 components = 0.000325482 Jy ! Clean residual min=-0.083663 max=0.057502 Jy/beam ! Clean residual mean=-0.010699 rms=0.015176 Jy/beam ! Combined flux in latest and established models = 2.79005 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 2.79005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.973228Jy sigma=2.629681 ! Fit after self-cal, rms=0.973211Jy sigma=2.629628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.973211Jy sigma=2.629628 ! Fit after self-cal, rms=0.973238Jy sigma=2.629563 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=10.16 mas, bpa=-18.49 degrees ! Estimated noise=5.0605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315951 Jy ! Component: 100 - total flux cleaned = 0.00399285 Jy ! Component: 150 - total flux cleaned = 0.00402987 Jy ! Component: 200 - total flux cleaned = 0.0047661 Jy ! Total flux subtracted in 200 components = 0.0047661 Jy ! Clean residual min=-0.103601 max=0.041526 Jy/beam ! Clean residual mean=-0.030427 rms=0.020377 Jy/beam ! Combined flux in latest and established models = 2.79481 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 2.79481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.976389Jy sigma=2.624246 ! Fit after self-cal, rms=0.976343Jy sigma=2.624041 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4288e-05 Jy ! Component: 100 - total flux cleaned = 0.000699639 Jy ! Component: 150 - total flux cleaned = 0.000733281 Jy ! Component: 200 - total flux cleaned = 0.00131932 Jy ! Total flux subtracted in 200 components = 0.00131932 Jy ! Clean residual min=-0.103032 max=0.041252 Jy/beam ! Clean residual mean=-0.030469 rms=0.020282 Jy/beam ! Combined flux in latest and established models = 2.79613 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 2.79613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.980039Jy sigma=2.629148 ! Fit after self-cal, rms=0.980028Jy sigma=2.629085 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=4.079 mas, bpa=-11.36 degrees ! Estimated noise=3.59502 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.885 x 4.079 at -11.36 degrees (North through East) ! Clean map min=-0.076834 max=2.2563 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.980028Jy sigma=2.629085 ! Fit after self-cal, rms=0.979680Jy sigma=2.626598 ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=4.092 mas, bpa=-11.58 degrees ! Estimated noise=3.59738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176535 Jy ! Component: 100 - total flux cleaned = -0.000479727 Jy ! Component: 150 - total flux cleaned = -0.000417325 Jy ! Component: 200 - total flux cleaned = -0.00104912 Jy ! Total flux subtracted in 200 components = -0.00104912 Jy ! Clean residual min=-0.082379 max=0.053947 Jy/beam ! Clean residual mean=-0.010763 rms=0.015078 Jy/beam ! Combined flux in latest and established models = 2.79508 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 2.79508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974386Jy sigma=2.624362 ! Fit after self-cal, rms=0.974379Jy sigma=2.624334 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140837 Jy ! Component: 100 - total flux cleaned = -0.00213187 Jy ! Component: 150 - total flux cleaned = -0.0024517 Jy ! Component: 200 - total flux cleaned = -0.00298068 Jy ! Total flux subtracted in 200 components = -0.00298068 Jy ! Clean residual min=-0.082462 max=0.054796 Jy/beam ! Clean residual mean=-0.010728 rms=0.015110 Jy/beam ! Combined flux in latest and established models = 2.7921 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 2.7921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.973480Jy sigma=2.626385 ! Fit after self-cal, rms=0.973475Jy sigma=2.626377 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.973475Jy sigma=2.626377 ! Fit after self-cal, rms=0.971888Jy sigma=2.617652 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=3.486 mas, bpa=-10.34 degrees ! Estimated noise=4.41418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71234 Jy ! Component: 100 - total flux cleaned = 2.18724 Jy ! Component: 150 - total flux cleaned = 2.45139 Jy ! Component: 200 - total flux cleaned = 2.61494 Jy ! Total flux subtracted in 200 components = 2.61494 Jy ! Clean residual min=-0.078871 max=0.093819 Jy/beam ! Clean residual mean=-0.000781 rms=0.017958 Jy/beam ! Combined flux in latest and established models = 2.61493 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.61493 Jy ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=4.083 mas, bpa=-11.46 degrees ! Estimated noise=3.59193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0865646 Jy ! Component: 100 - total flux cleaned = 0.113521 Jy ! Component: 150 - total flux cleaned = 0.128176 Jy ! Component: 200 - total flux cleaned = 0.138315 Jy ! Total flux subtracted in 200 components = 0.138315 Jy ! Clean residual min=-0.076673 max=0.054666 Jy/beam ! Clean residual mean=-0.010254 rms=0.014939 Jy/beam ! Combined flux in latest and established models = 2.75325 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 2.75325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.524 mas, bmaj=10.16 mas, bpa=-18.6 degrees ! Estimated noise=5.05258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034375 Jy ! Component: 100 - total flux cleaned = 0.0375605 Jy ! Component: 150 - total flux cleaned = 0.0388204 Jy ! Component: 200 - total flux cleaned = 0.0375098 Jy ! Total flux subtracted in 200 components = 0.0375098 Jy ! Clean residual min=-0.102008 max=0.042423 Jy/beam ! Clean residual mean=-0.030238 rms=0.019742 Jy/beam ! Combined flux in latest and established models = 2.79076 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.56779e-05 Jy ! Component: 100 - total flux cleaned = -0.000103946 Jy ! Component: 150 - total flux cleaned = -0.000224999 Jy ! Component: 200 - total flux cleaned = -0.00202737 Jy ! Total flux subtracted in 200 components = -0.00202737 Jy ! Clean residual min=-0.099842 max=0.043350 Jy/beam ! Clean residual mean=-0.030171 rms=0.019556 Jy/beam ! Combined flux in latest and established models = 2.78873 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 2.78873 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=4.083 mas, bpa=-11.46 degrees ! Estimated noise=3.59193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654408 Jy ! Component: 100 - total flux cleaned = 0.00224178 Jy ! Component: 150 - total flux cleaned = 0.00232201 Jy ! Component: 200 - total flux cleaned = 0.00238957 Jy ! Total flux subtracted in 200 components = 0.00238957 Jy ! Clean residual min=-0.075497 max=0.050499 Jy/beam ! Clean residual mean=-0.010689 rms=0.014461 Jy/beam ! Combined flux in latest and established models = 2.79112 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 2.79112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.963521Jy sigma=2.561486 ! Fit after self-cal, rms=0.962986Jy sigma=2.555251 wmodel /d2/scr/pima/rv101_uvs/J0854+2006_S_map.mod ! Writing 62 model components to file: /d2/scr/pima/rv101_uvs/J0854+2006_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0854+2006_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0854+2006_S_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0854+2006_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0347303 Jy ! Component: 100 - total flux cleaned = -0.0667519 Jy ! Component: 150 - total flux cleaned = -0.0969814 Jy ! Component: 200 - total flux cleaned = -0.125927 Jy ! Component: 250 - total flux cleaned = -0.153802 Jy ! Component: 300 - total flux cleaned = -0.180703 Jy ! Component: 350 - total flux cleaned = -0.20672 Jy ! Component: 400 - total flux cleaned = -0.231919 Jy ! Component: 450 - total flux cleaned = -0.253446 Jy ! Component: 500 - total flux cleaned = -0.27249 Jy ! Component: 550 - total flux cleaned = -0.290155 Jy ! Component: 600 - total flux cleaned = -0.309253 Jy ! Component: 650 - total flux cleaned = -0.326181 Jy ! Component: 700 - total flux cleaned = -0.344517 Jy ! Component: 750 - total flux cleaned = -0.359941 Jy ! Component: 800 - total flux cleaned = -0.37593 Jy ! Component: 850 - total flux cleaned = -0.388345 Jy ! Component: 900 - total flux cleaned = -0.400586 Jy ! Component: 950 - total flux cleaned = -0.412657 Jy ! Component: 1000 - total flux cleaned = -0.422983 Jy ! Component: 1050 - total flux cleaned = -0.434761 Jy ! Component: 1100 - total flux cleaned = -0.445623 Jy ! Component: 1150 - total flux cleaned = -0.455591 Jy ! Component: 1200 - total flux cleaned = -0.463935 Jy ! Component: 1250 - total flux cleaned = -0.472193 Jy ! Component: 1300 - total flux cleaned = -0.481112 Jy ! Component: 1350 - total flux cleaned = -0.488469 Jy ! Component: 1400 - total flux cleaned = -0.49575 Jy ! Component: 1450 - total flux cleaned = -0.502958 Jy ! Component: 1500 - total flux cleaned = -0.510097 Jy ! Component: 1550 - total flux cleaned = -0.518577 Jy ! Component: 1600 - total flux cleaned = -0.524175 Jy ! Component: 1650 - total flux cleaned = -0.530421 Jy ! Component: 1700 - total flux cleaned = -0.535927 Jy ! Component: 1750 - total flux cleaned = -0.54275 Jy ! Component: 1800 - total flux cleaned = -0.548164 Jy ! Component: 1850 - total flux cleaned = -0.554867 Jy ! Component: 1900 - total flux cleaned = -0.560188 Jy ! Component: 1950 - total flux cleaned = -0.566127 Jy ! Component: 2000 - total flux cleaned = -0.572015 Jy ! Component: 2050 - total flux cleaned = -0.578516 Jy ! Component: 2100 - total flux cleaned = -0.585609 Jy ! Component: 2150 - total flux cleaned = -0.59073 Jy ! Component: 2200 - total flux cleaned = -0.597086 Jy ! Component: 2250 - total flux cleaned = -0.604027 Jy ! Component: 2300 - total flux cleaned = -0.609039 Jy ! Component: 2350 - total flux cleaned = -0.615262 Jy ! Component: 2400 - total flux cleaned = -0.620821 Jy ! Component: 2450 - total flux cleaned = -0.62757 Jy ! Component: 2500 - total flux cleaned = -0.63305 Jy ! Component: 2550 - total flux cleaned = -0.63789 Jy ! Component: 2600 - total flux cleaned = -0.643905 Jy ! Component: 2650 - total flux cleaned = -0.648686 Jy ! Component: 2700 - total flux cleaned = -0.655811 Jy ! Component: 2750 - total flux cleaned = -0.659355 Jy ! Component: 2800 - total flux cleaned = -0.66464 Jy ! Component: 2850 - total flux cleaned = -0.668726 Jy ! Component: 2900 - total flux cleaned = -0.673951 Jy ! Component: 2950 - total flux cleaned = -0.678567 Jy ! Component: 3000 - total flux cleaned = -0.684305 Jy ! Component: 3050 - total flux cleaned = -0.687727 Jy ! Component: 3100 - total flux cleaned = -0.6934 Jy ! Component: 3150 - total flux cleaned = -0.698477 Jy ! Component: 3200 - total flux cleaned = -0.701845 Jy ! Component: 3250 - total flux cleaned = -0.706869 Jy ! Component: 3300 - total flux cleaned = -0.711305 Jy ! Component: 3350 - total flux cleaned = -0.714618 Jy ! Component: 3400 - total flux cleaned = -0.71901 Jy ! Component: 3450 - total flux cleaned = -0.723379 Jy ! Component: 3500 - total flux cleaned = -0.726641 Jy ! Component: 3550 - total flux cleaned = -0.731512 Jy ! Component: 3600 - total flux cleaned = -0.734202 Jy ! Component: 3650 - total flux cleaned = -0.737953 Jy ! Component: 3700 - total flux cleaned = -0.742749 Jy ! Component: 3750 - total flux cleaned = -0.745933 Jy ! Component: 3800 - total flux cleaned = -0.750155 Jy ! Component: 3850 - total flux cleaned = -0.753303 Jy ! Component: 3900 - total flux cleaned = -0.756441 Jy ! Component: 3950 - total flux cleaned = -0.760604 Jy ! Component: 4000 - total flux cleaned = -0.763712 Jy ! Component: 4050 - total flux cleaned = -0.76629 Jy ! Total flux subtracted in 4096 components = -0.770396 Jy ! Clean residual min=-0.026866 max=0.025620 Jy/beam ! Clean residual mean=-0.003043 rms=0.009090 Jy/beam ! Combined flux in latest and established models = 2.02073 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 406 components and 2.02073 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0854+2006_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.886 x 4.083 at -11.46 degrees (North through East) ! Clean map min=-0.074778 max=2.3327 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0854+2006_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.33266 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00907594 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16725 1.16725 2.33449 4.66898 9.33796 18.6759 37.3518 74.7037 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0272 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.332 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 257.015 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0854+2006_S_uvs.log closed on Sat Nov 29 13:52:04 2014