! Started logfile: /d2/scr/pima/rv101_uvs/J0850-1213_S_uvs.log on Sat Nov 29 13:51:52 2014
obs /d2/scr/pima/rv101_uvs/J0850-1213_S_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0850-1213_S_uva.fits
! AN table 1: 4 integrations on 10 of 10 possible baselines.
! AN table 2: 7 integrations on 3 of 3 possible baselines.
! AN table 3: 8 integrations on 3 of 3 possible baselines.
! AN table 4: 23 integrations on 36 of 36 possible baselines.
! AN table 5: 7 integrations on 6 of 6 possible baselines.
! AN table 6: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.804737 visibilities/baseline/integration-bin.
! Found source: J0850-1213
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6116 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0850-1213_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  A total of 51 telescope corrections were flagged in sub-array 4.
!  A total of 4 telescope corrections were flagged in sub-array 5.
!  A total of 50 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  A total of 51 telescope corrections were flagged in sub-array 4.
!  A total of 4 telescope corrections were flagged in sub-array 5.
!  A total of 50 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  A total of 51 telescope corrections were flagged in sub-array 4.
!  A total of 4 telescope corrections were flagged in sub-array 5.
!  A total of 50 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
!  A total of 51 telescope corrections were flagged in sub-array 4.
!  A total of 4 telescope corrections were flagged in sub-array 5.
!  A total of 50 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=1.051461Jy  sigma=10.618121
! Fit after  self-cal, rms=0.708633Jy  sigma=7.235697
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.85 mas, bmaj=7.985 mas, bpa=-8.639 degrees
! Estimated noise=1.83297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.227005 Jy
! Component: 100  -  total flux cleaned = 0.280717 Jy
! Total flux subtracted in 100 components = 0.280717 Jy
! Clean residual min=-0.012484 max=0.023695 Jy/beam
! Clean residual mean=-0.000074 rms=0.003034 Jy/beam
! Combined flux in latest and established models = 0.280717 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.280717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098137Jy  sigma=0.893754
! Fit after  self-cal, rms=0.098129Jy  sigma=0.893548
! Inverting map 
! Added new window around map position (-9.5, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0267561 Jy
! Component: 100  -  total flux cleaned = 0.0432914 Jy
! Total flux subtracted in 100 components = 0.0432914 Jy
! Clean residual min=-0.009215 max=0.015875 Jy/beam
! Clean residual mean=-0.000111 rms=0.002344 Jy/beam
! Combined flux in latest and established models = 0.324009 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.324009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091940Jy  sigma=0.814710
! Fit after  self-cal, rms=0.091848Jy  sigma=0.813178
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.593 mas, bmaj=10.75 mas, bpa=-10.96 degrees
! Estimated noise=1.05381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250797 Jy
! Component: 100  -  total flux cleaned = 0.00283599 Jy
! Component: 150  -  total flux cleaned = 0.00258562 Jy
! Component: 200  -  total flux cleaned = 0.00173511 Jy
! Total flux subtracted in 200 components = 0.00173511 Jy
! Clean residual min=-0.008246 max=0.004468 Jy/beam
! Clean residual mean=-0.001728 rms=0.001698 Jy/beam
! Combined flux in latest and established models = 0.325744 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 37 components and 0.325744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090317Jy  sigma=0.789822
! Fit after  self-cal, rms=0.090261Jy  sigma=0.789265
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.593 x 10.75 at -10.96 degrees (North through East)
! Clean map  min=-0.0081396  max=0.29123 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    WF        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    NL        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.00*    NL        1.00*    SC        1.00*    WF        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    WF        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    NL        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.00*    NL        1.00*    SC        1.00*    WF        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    OV        1.00*    
!   PT        1.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    WF        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    NL        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.00*    NL        1.00*    SC        1.00*    WF        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        0.86     MK        0.88     OV        0.86     
!   PT        0.86     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    WF        0.00*    
! 
!  A total of 18 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HN        0.00*    NL        0.00*    WF        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
!   WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.00*    NL        1.00*    SC        1.00*    WF        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    WF        1.00*    
! 
! 
! Fit before self-cal, rms=0.090261Jy  sigma=0.789265
! Fit after  self-cal, rms=0.089706Jy  sigma=0.791676
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.82 mas, bpa=-10.71 degrees
! Estimated noise=1.06362 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138469 Jy
! Component: 100  -  total flux cleaned = 0.00120309 Jy
! Component: 150  -  total flux cleaned = 0.00120079 Jy
! Component: 200  -  total flux cleaned = 0.00119292 Jy
! Total flux subtracted in 200 components = 0.00119292 Jy
! Clean residual min=-0.007104 max=0.004833 Jy/beam
! Clean residual mean=-0.001215 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 0.326937 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 52 components and 0.326937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089132Jy  sigma=0.785672
! Fit after  self-cal, rms=0.089129Jy  sigma=0.785562
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089129Jy  sigma=0.785562
! Fit after  self-cal, rms=0.089129Jy  sigma=0.785560
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.82 mas, bpa=-10.71 degrees
! Estimated noise=1.06364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000279248 Jy
! Component: 100  -  total flux cleaned = -0.000395082 Jy
! Component: 150  -  total flux cleaned = -0.000391082 Jy
! Component: 200  -  total flux cleaned = -0.000390945 Jy
! Total flux subtracted in 200 components = -0.000390945 Jy
! Clean residual min=-0.007203 max=0.004894 Jy/beam
! Clean residual mean=-0.001211 rms=0.001578 Jy/beam
! Combined flux in latest and established models = 0.326546 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 60 components and 0.326546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088861Jy  sigma=0.782793
! Fit after  self-cal, rms=0.088863Jy  sigma=0.782732
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294873 Jy
! Component: 100  -  total flux cleaned = -0.000294964 Jy
! Component: 150  -  total flux cleaned = -0.000454898 Jy
! Component: 200  -  total flux cleaned = -0.000453518 Jy
! Total flux subtracted in 200 components = -0.000453518 Jy
! Clean residual min=-0.007221 max=0.004900 Jy/beam
! Clean residual mean=-0.001206 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.326092 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 74 components and 0.326092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088718Jy  sigma=0.781350
! Fit after  self-cal, rms=0.088719Jy  sigma=0.781316
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088719Jy  sigma=0.781316
! Fit after  self-cal, rms=0.088718Jy  sigma=0.781314
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.82 mas, bpa=-10.71 degrees
! Estimated noise=1.06364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000235761 Jy
! Component: 100  -  total flux cleaned = -0.000370781 Jy
! Component: 150  -  total flux cleaned = -0.000435793 Jy
! Component: 200  -  total flux cleaned = -0.000560883 Jy
! Total flux subtracted in 200 components = -0.000560883 Jy
! Clean residual min=-0.007230 max=0.004897 Jy/beam
! Clean residual mean=-0.001199 rms=0.001550 Jy/beam
! Combined flux in latest and established models = 0.325531 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.325531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088632Jy  sigma=0.780366
! Fit after  self-cal, rms=0.088634Jy  sigma=0.780350
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133741 Jy
! Component: 100  -  total flux cleaned = -0.000250394 Jy
! Component: 150  -  total flux cleaned = -0.000360413 Jy
! Component: 200  -  total flux cleaned = -0.000413376 Jy
! Total flux subtracted in 200 components = -0.000413376 Jy
! Clean residual min=-0.007239 max=0.004877 Jy/beam
! Clean residual mean=-0.001194 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.325118 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 86 components and 0.325118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088566Jy  sigma=0.779748
! Fit after  self-cal, rms=0.088568Jy  sigma=0.779738
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088568Jy  sigma=0.779738
! Fit after  self-cal, rms=0.087954Jy  sigma=0.764460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.362 mas, bmaj=17.51 mas, bpa=-11.29 degrees
! Estimated noise=1.25102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109287 Jy
! Component: 100  -  total flux cleaned = 0.000672022 Jy
! Component: 150  -  total flux cleaned = 0.000243755 Jy
! Component: 200  -  total flux cleaned = -8.14024e-05 Jy
! Total flux subtracted in 200 components = -8.14024e-05 Jy
! Clean residual min=-0.008564 max=0.004761 Jy/beam
! Clean residual mean=-0.002286 rms=0.002087 Jy/beam
! Combined flux in latest and established models = 0.325036 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 0.325036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087613Jy  sigma=0.765824
! Fit after  self-cal, rms=0.087628Jy  sigma=0.765739
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000480316 Jy
! Component: 100  -  total flux cleaned = -0.000783916 Jy
! Component: 150  -  total flux cleaned = -0.00106878 Jy
! Component: 200  -  total flux cleaned = -0.00133697 Jy
! Total flux subtracted in 200 components = -0.00133697 Jy
! Clean residual min=-0.008561 max=0.004738 Jy/beam
! Clean residual mean=-0.002254 rms=0.002086 Jy/beam
! Combined flux in latest and established models = 0.3237 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 114 components and 0.323699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087581Jy  sigma=0.765834
! Fit after  self-cal, rms=0.087581Jy  sigma=0.765797
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.8 mas, bpa=-10.68 degrees
! Estimated noise=1.07595 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.602 x 10.8 at -10.68 degrees (North through East)
! Clean map  min=-0.010026  max=0.29632 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.838 mas, bmaj=7.992 mas, bpa=-8.492 degrees
! Estimated noise=1.87499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.229525 Jy
! Component: 100  -  total flux cleaned = 0.284453 Jy
! Component: 150  -  total flux cleaned = 0.311839 Jy
! Component: 200  -  total flux cleaned = 0.328972 Jy
! Total flux subtracted in 200 components = 0.328972 Jy
! Clean residual min=-0.009736 max=0.009520 Jy/beam
! Clean residual mean=-0.000118 rms=0.002256 Jy/beam
! Combined flux in latest and established models = 0.328972 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.328972 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.8 mas, bpa=-10.68 degrees
! Estimated noise=1.07595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232272 Jy
! Component: 100  -  total flux cleaned = 0.000871144 Jy
! Component: 150  -  total flux cleaned = 0.000631275 Jy
! Component: 200  -  total flux cleaned = 0.000178382 Jy
! Total flux subtracted in 200 components = 0.000178382 Jy
! Clean residual min=-0.007073 max=0.005899 Jy/beam
! Clean residual mean=-0.001224 rms=0.001618 Jy/beam
! Combined flux in latest and established models = 0.32915 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 40 components and 0.32915 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.362 mas, bmaj=17.51 mas, bpa=-11.29 degrees
! Estimated noise=1.25102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00171405 Jy
! Component: 100  -  total flux cleaned = -0.00220821 Jy
! Component: 150  -  total flux cleaned = -0.00277753 Jy
! Component: 200  -  total flux cleaned = -0.00326668 Jy
! Total flux subtracted in 200 components = -0.00326668 Jy
! Clean residual min=-0.008824 max=0.005208 Jy/beam
! Clean residual mean=-0.002305 rms=0.002095 Jy/beam
! Combined flux in latest and established models = 0.325883 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208712 Jy
! Component: 100  -  total flux cleaned = -0.000402523 Jy
! Component: 150  -  total flux cleaned = -0.000660664 Jy
! Component: 200  -  total flux cleaned = -0.000982785 Jy
! Total flux subtracted in 200 components = -0.000982785 Jy
! Clean residual min=-0.008705 max=0.005157 Jy/beam
! Clean residual mean=-0.002282 rms=0.002090 Jy/beam
! Combined flux in latest and established models = 0.324901 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 87 components and 0.324901 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=10.8 mas, bpa=-10.68 degrees
! Estimated noise=1.07595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000969078 Jy
! Component: 100  -  total flux cleaned = 0.00138678 Jy
! Component: 150  -  total flux cleaned = 0.00186903 Jy
! Component: 200  -  total flux cleaned = 0.00208362 Jy
! Total flux subtracted in 200 components = 0.00208362 Jy
! Clean residual min=-0.006967 max=0.004054 Jy/beam
! Clean residual mean=-0.001199 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 0.326984 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.326984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087906Jy  sigma=0.768005
! Fit after  self-cal, rms=0.087893Jy  sigma=0.767908
wmodel /d2/scr/pima/rv101_uvs/J0850-1213_S_map.mod
! Writing 104 model components to file: /d2/scr/pima/rv101_uvs/J0850-1213_S_map.mod
wobs /d2/scr/pima/rv101_uvs/J0850-1213_S_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0850-1213_S_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J0850-1213_S_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J0850-1213_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00312672 Jy
! Component: 100  -  total flux cleaned = -0.00594777 Jy
! Component: 150  -  total flux cleaned = -0.00859345 Jy
! Component: 200  -  total flux cleaned = -0.0111133 Jy
! Component: 250  -  total flux cleaned = -0.0135395 Jy
! Component: 300  -  total flux cleaned = -0.0158832 Jy
! Component: 350  -  total flux cleaned = -0.0181547 Jy
! Component: 400  -  total flux cleaned = -0.0203587 Jy
! Component: 450  -  total flux cleaned = -0.0225009 Jy
! Component: 500  -  total flux cleaned = -0.0245871 Jy
! Component: 550  -  total flux cleaned = -0.0264596 Jy
! Component: 600  -  total flux cleaned = -0.0281326 Jy
! Component: 650  -  total flux cleaned = -0.0297741 Jy
! Component: 700  -  total flux cleaned = -0.0313852 Jy
! Component: 750  -  total flux cleaned = -0.0329671 Jy
! Component: 800  -  total flux cleaned = -0.0344473 Jy
! Component: 850  -  total flux cleaned = -0.0359748 Jy
! Component: 900  -  total flux cleaned = -0.0374054 Jy
! Component: 950  -  total flux cleaned = -0.0386722 Jy
! Component: 1000  -  total flux cleaned = -0.0400584 Jy
! Component: 1050  -  total flux cleaned = -0.0412191 Jy
! Component: 1100  -  total flux cleaned = -0.0424984 Jy
! Component: 1150  -  total flux cleaned = -0.0436938 Jy
! Component: 1200  -  total flux cleaned = -0.0449385 Jy
! Component: 1250  -  total flux cleaned = -0.0459737 Jy
! Component: 1300  -  total flux cleaned = -0.0469962 Jy
! Component: 1350  -  total flux cleaned = -0.0481314 Jy
! Component: 1400  -  total flux cleaned = -0.0491279 Jy
! Component: 1450  -  total flux cleaned = -0.050113 Jy
! Component: 1500  -  total flux cleaned = -0.0511464 Jy
! Component: 1550  -  total flux cleaned = -0.0519877 Jy
! Component: 1600  -  total flux cleaned = -0.0528792 Jy
! Component: 1650  -  total flux cleaned = -0.0538197 Jy
! Component: 1700  -  total flux cleaned = -0.0546334 Jy
! Component: 1750  -  total flux cleaned = -0.0554958 Jy
! Component: 1800  -  total flux cleaned = -0.0562919 Jy
! Component: 1850  -  total flux cleaned = -0.056968 Jy
! Component: 1900  -  total flux cleaned = -0.0576933 Jy
! Component: 1950  -  total flux cleaned = -0.058522 Jy
! Component: 2000  -  total flux cleaned = -0.0592333 Jy
! Component: 2050  -  total flux cleaned = -0.0599922 Jy
! Component: 2100  -  total flux cleaned = -0.0606371 Jy
! Component: 2150  -  total flux cleaned = -0.0613825 Jy
! Component: 2200  -  total flux cleaned = -0.0620685 Jy
! Component: 2250  -  total flux cleaned = -0.0626966 Jy
! Component: 2300  -  total flux cleaned = -0.0634227 Jy
! Component: 2350  -  total flux cleaned = -0.0641428 Jy
! Component: 2400  -  total flux cleaned = -0.0648051 Jy
! Component: 2450  -  total flux cleaned = -0.065361 Jy
! Component: 2500  -  total flux cleaned = -0.066013 Jy
! Component: 2550  -  total flux cleaned = -0.0667086 Jy
! Component: 2600  -  total flux cleaned = -0.0672015 Jy
! Component: 2650  -  total flux cleaned = -0.0678377 Jy
! Component: 2700  -  total flux cleaned = -0.0684196 Jy
! Component: 2750  -  total flux cleaned = -0.068901 Jy
! Component: 2800  -  total flux cleaned = -0.0694743 Jy
! Component: 2850  -  total flux cleaned = -0.0700905 Jy
! Component: 2900  -  total flux cleaned = -0.070467 Jy
! Component: 2950  -  total flux cleaned = -0.0710744 Jy
! Component: 3000  -  total flux cleaned = -0.0715383 Jy
! Component: 3050  -  total flux cleaned = -0.0719989 Jy
! Component: 3100  -  total flux cleaned = -0.0725023 Jy
! Component: 3150  -  total flux cleaned = -0.0730019 Jy
! Component: 3200  -  total flux cleaned = -0.0735431 Jy
! Component: 3250  -  total flux cleaned = -0.0739465 Jy
! Component: 3300  -  total flux cleaned = -0.0743922 Jy
! Component: 3350  -  total flux cleaned = -0.0749232 Jy
! Component: 3400  -  total flux cleaned = -0.0752751 Jy
! Component: 3450  -  total flux cleaned = -0.0757561 Jy
! Component: 3500  -  total flux cleaned = -0.0762343 Jy
! Component: 3550  -  total flux cleaned = -0.0767093 Jy
! Component: 3600  -  total flux cleaned = -0.0771815 Jy
! Component: 3650  -  total flux cleaned = -0.0776078 Jy
! Component: 3700  -  total flux cleaned = -0.0779473 Jy
! Component: 3750  -  total flux cleaned = -0.0783267 Jy
! Component: 3800  -  total flux cleaned = -0.0786202 Jy
! Component: 3850  -  total flux cleaned = -0.078954 Jy
! Component: 3900  -  total flux cleaned = -0.0794104 Jy
! Component: 3950  -  total flux cleaned = -0.0797405 Jy
! Component: 4000  -  total flux cleaned = -0.0801509 Jy
! Component: 4050  -  total flux cleaned = -0.0804777 Jy
! Total flux subtracted in 4096 components = -0.0808433 Jy
! Clean residual min=-0.002497 max=0.002225 Jy/beam
! Clean residual mean=-0.000364 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.246141 Jy
keep
! Adding 402 model components to the UV plane model.
! The established model now contains 504 components and 0.246141 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J0850-1213_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.602 x 10.8 at -10.68 degrees (North through East)
! Clean map  min=-0.008776  max=0.29845 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0850-1213_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.29845 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000782411 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.786473 0.786473 1.57295 3.14589 6.29179 12.5836 25.1671 50.3343
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.298 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  381.449 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J0850-1213_S_uvs.log closed on Sat Nov 29 13:51:57 2014