! Started logfile: /d2/scr/pima/rv101_uvs/J0811+0146_X_uvs.log on Sat Nov 29 16:31:37 2014 obs /d2/scr/pima/rv101_uvs/J0811+0146_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0811+0146_X_uva.fits ! AN table 1: 92 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.96087 visibilities/baseline/integration-bin. ! Found source: J0811+0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3536 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0811+0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.066420Jy sigma=16.451112 ! Fit after self-cal, rms=0.622057Jy sigma=9.609179 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9952 mas, bmaj=5.83 mas, bpa=-30.64 degrees ! Estimated noise=1.41173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.304107 Jy ! Component: 100 - total flux cleaned = 0.370552 Jy ! Total flux subtracted in 100 components = 0.370552 Jy ! Clean residual min=-0.013692 max=0.018722 Jy/beam ! Clean residual mean=-0.000009 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 0.370552 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.370552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120247Jy sigma=1.794450 ! Fit after self-cal, rms=0.120203Jy sigma=1.793721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.314 mas, bmaj=5.361 mas, bpa=-31.18 degrees ! Estimated noise=0.797739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172939 Jy ! Component: 100 - total flux cleaned = 0.0258942 Jy ! Component: 150 - total flux cleaned = 0.0313253 Jy ! Component: 200 - total flux cleaned = 0.034728 Jy ! Total flux subtracted in 200 components = 0.034728 Jy ! Clean residual min=-0.008151 max=0.007192 Jy/beam ! Clean residual mean=0.000009 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 0.40528 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.40528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117770Jy sigma=1.753884 ! Fit after self-cal, rms=0.117783Jy sigma=1.753747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.314 x 5.361 at -31.18 degrees (North through East) ! Clean map min=-0.0082296 max=0.37522 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 LA 1.04 MK 0.99 OV 0.98 ! PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 0.99 MK 1.01 OV 0.94 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 LA 1.04 MK 0.99 OV 1.03 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 1.04 MK 1.04 OV 0.98 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.117783Jy sigma=1.753747 ! Fit after self-cal, rms=0.116302Jy sigma=1.719284 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.318 mas, bmaj=5.371 mas, bpa=-31.25 degrees ! Estimated noise=0.797567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000681296 Jy ! Component: 100 - total flux cleaned = -0.00135338 Jy ! Component: 150 - total flux cleaned = -0.00175084 Jy ! Component: 200 - total flux cleaned = -0.00182549 Jy ! Total flux subtracted in 200 components = -0.00182549 Jy ! Clean residual min=-0.005061 max=0.004437 Jy/beam ! Clean residual mean=-0.000004 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.403454 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.403454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116248Jy sigma=1.718421 ! Fit after self-cal, rms=0.116285Jy sigma=1.718145 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116285Jy sigma=1.718145 ! Fit after self-cal, rms=0.116222Jy sigma=1.718098 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.319 mas, bmaj=5.373 mas, bpa=-31.25 degrees ! Estimated noise=0.796755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000955265 Jy ! Component: 100 - total flux cleaned = -0.00125241 Jy ! Component: 150 - total flux cleaned = -0.00136748 Jy ! Component: 200 - total flux cleaned = -0.00136795 Jy ! Total flux subtracted in 200 components = -0.00136795 Jy ! Clean residual min=-0.004932 max=0.004234 Jy/beam ! Clean residual mean=-0.000004 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.402086 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.402086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116206Jy sigma=1.717845 ! Fit after self-cal, rms=0.116207Jy sigma=1.717840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.46352e-05 Jy ! Component: 100 - total flux cleaned = 6.50607e-07 Jy ! Component: 150 - total flux cleaned = 2.28762e-05 Jy ! Component: 200 - total flux cleaned = 4.34939e-05 Jy ! Total flux subtracted in 200 components = 4.34939e-05 Jy ! Clean residual min=-0.004904 max=0.004196 Jy/beam ! Clean residual mean=-0.000004 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.40213 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.40213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116199Jy sigma=1.717727 ! Fit after self-cal, rms=0.116200Jy sigma=1.717725 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116200Jy sigma=1.717725 ! Fit after self-cal, rms=0.116128Jy sigma=1.713752 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.318 mas, bmaj=5.373 mas, bpa=-31.26 degrees ! Estimated noise=0.796263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748547 Jy ! Component: 100 - total flux cleaned = -0.000758393 Jy ! Component: 150 - total flux cleaned = -0.000720249 Jy ! Component: 200 - total flux cleaned = -0.000704036 Jy ! Total flux subtracted in 200 components = -0.000704036 Jy ! Clean residual min=-0.005054 max=0.003691 Jy/beam ! Clean residual mean=-0.000007 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.401426 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.401426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116118Jy sigma=1.713626 ! Fit after self-cal, rms=0.116129Jy sigma=1.713584 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.80171e-05 Jy ! Component: 100 - total flux cleaned = -7.24249e-05 Jy ! Component: 150 - total flux cleaned = -4.28537e-05 Jy ! Component: 200 - total flux cleaned = -2.88216e-05 Jy ! Total flux subtracted in 200 components = -2.88216e-05 Jy ! Clean residual min=-0.005039 max=0.003693 Jy/beam ! Clean residual mean=-0.000008 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.401397 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.401397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116124Jy sigma=1.713538 ! Fit after self-cal, rms=0.116124Jy sigma=1.713534 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116124Jy sigma=1.713534 ! Fit after self-cal, rms=0.116155Jy sigma=1.713497 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=5.062 mas, bpa=-27.68 degrees ! Estimated noise=0.940683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392969 Jy ! Component: 100 - total flux cleaned = -0.000380892 Jy ! Component: 150 - total flux cleaned = -0.000326676 Jy ! Component: 200 - total flux cleaned = -0.000278062 Jy ! Total flux subtracted in 200 components = -0.000278062 Jy ! Clean residual min=-0.006130 max=0.003877 Jy/beam ! Clean residual mean=-0.000012 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.401119 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.401119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116150Jy sigma=1.713441 ! Fit after self-cal, rms=0.116152Jy sigma=1.713436 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.15092e-05 Jy ! Component: 100 - total flux cleaned = -1.58823e-05 Jy ! Component: 150 - total flux cleaned = 2.48468e-05 Jy ! Component: 200 - total flux cleaned = 6.23746e-05 Jy ! Total flux subtracted in 200 components = 6.23746e-05 Jy ! Clean residual min=-0.006092 max=0.003865 Jy/beam ! Clean residual mean=-0.000012 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.401181 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 97 components and 0.401181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116150Jy sigma=1.713415 ! Fit after self-cal, rms=0.116149Jy sigma=1.713413 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.318 mas, bmaj=5.376 mas, bpa=-31.26 degrees ! Estimated noise=0.795961 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.318 x 5.376 at -31.26 degrees (North through East) ! Clean map min=-0.0048251 max=0.37529 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9982 mas, bmaj=5.83 mas, bpa=-30.68 degrees ! Estimated noise=1.40856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30335 Jy ! Component: 100 - total flux cleaned = 0.369935 Jy ! Component: 150 - total flux cleaned = 0.381643 Jy ! Component: 200 - total flux cleaned = 0.385573 Jy ! Total flux subtracted in 200 components = 0.385573 Jy ! Clean residual min=-0.008395 max=0.006941 Jy/beam ! Clean residual mean=-0.000007 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.385573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.385573 Jy ! Inverting map and beam ! Estimated beam: bmin=1.318 mas, bmaj=5.376 mas, bpa=-31.26 degrees ! Estimated noise=0.795961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589855 Jy ! Component: 100 - total flux cleaned = 0.0090852 Jy ! Component: 150 - total flux cleaned = 0.0113476 Jy ! Component: 200 - total flux cleaned = 0.0130196 Jy ! Total flux subtracted in 200 components = 0.0130196 Jy ! Clean residual min=-0.005176 max=0.003898 Jy/beam ! Clean residual mean=-0.000010 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.398593 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.398593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=5.062 mas, bpa=-27.68 degrees ! Estimated noise=0.940683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148065 Jy ! Component: 100 - total flux cleaned = 0.0016892 Jy ! Component: 150 - total flux cleaned = 0.00179809 Jy ! Component: 200 - total flux cleaned = 0.00189388 Jy ! Total flux subtracted in 200 components = 0.00189388 Jy ! Clean residual min=-0.005890 max=0.003740 Jy/beam ! Clean residual mean=-0.000014 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.400487 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.90348e-05 Jy ! Component: 100 - total flux cleaned = 8.75484e-05 Jy ! Component: 150 - total flux cleaned = 0.000138922 Jy ! Component: 200 - total flux cleaned = 0.000185911 Jy ! Total flux subtracted in 200 components = 0.000185911 Jy ! Clean residual min=-0.005890 max=0.003679 Jy/beam ! Clean residual mean=-0.000014 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.400673 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 0.400673 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.318 mas, bmaj=5.376 mas, bpa=-31.26 degrees ! Estimated noise=0.795961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89117e-05 Jy ! Component: 100 - total flux cleaned = 0.000117265 Jy ! Component: 150 - total flux cleaned = 0.000199766 Jy ! Component: 200 - total flux cleaned = 0.000258172 Jy ! Total flux subtracted in 200 components = 0.000258172 Jy ! Clean residual min=-0.004817 max=0.003531 Jy/beam ! Clean residual mean=-0.000008 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.400931 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.400931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116160Jy sigma=1.713607 ! Fit after self-cal, rms=0.116154Jy sigma=1.713576 wmodel /d2/scr/pima/rv101_uvs/J0811+0146_X_map.mod ! Writing 68 model components to file: /d2/scr/pima/rv101_uvs/J0811+0146_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0811+0146_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0811+0146_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0811+0146_X_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J0811+0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211722 Jy ! Component: 100 - total flux cleaned = -0.00324472 Jy ! Component: 150 - total flux cleaned = -0.00374577 Jy ! Component: 200 - total flux cleaned = -0.00403539 Jy ! Component: 250 - total flux cleaned = -0.00435955 Jy ! Component: 300 - total flux cleaned = -0.00461731 Jy ! Component: 350 - total flux cleaned = -0.00500776 Jy ! Component: 400 - total flux cleaned = -0.00523883 Jy ! Component: 450 - total flux cleaned = -0.00563651 Jy ! Component: 500 - total flux cleaned = -0.00606208 Jy ! Component: 550 - total flux cleaned = -0.0065131 Jy ! Component: 600 - total flux cleaned = -0.00698725 Jy ! Component: 650 - total flux cleaned = -0.00744744 Jy ! Component: 700 - total flux cleaned = -0.00789438 Jy ! Component: 750 - total flux cleaned = -0.00836449 Jy ! Component: 800 - total flux cleaned = -0.00878704 Jy ! Component: 850 - total flux cleaned = -0.00916518 Jy ! Component: 900 - total flux cleaned = -0.00963464 Jy ! Component: 950 - total flux cleaned = -0.0100603 Jy ! Component: 1000 - total flux cleaned = -0.0105084 Jy ! Component: 1050 - total flux cleaned = -0.0110091 Jy ! Component: 1100 - total flux cleaned = -0.0115914 Jy ! Component: 1150 - total flux cleaned = -0.012013 Jy ! Component: 1200 - total flux cleaned = -0.0125448 Jy ! Component: 1250 - total flux cleaned = -0.0129801 Jy ! Component: 1300 - total flux cleaned = -0.0134369 Jy ! Component: 1350 - total flux cleaned = -0.013914 Jy ! Component: 1400 - total flux cleaned = -0.014356 Jy ! Component: 1450 - total flux cleaned = -0.0147366 Jy ! Component: 1500 - total flux cleaned = -0.0151119 Jy ! Component: 1550 - total flux cleaned = -0.0154554 Jy ! Component: 1600 - total flux cleaned = -0.01569 Jy ! Component: 1650 - total flux cleaned = -0.0158959 Jy ! Component: 1700 - total flux cleaned = -0.0160738 Jy ! Component: 1750 - total flux cleaned = -0.0163252 Jy ! Component: 1800 - total flux cleaned = -0.0165239 Jy ! Component: 1850 - total flux cleaned = -0.016745 Jy ! Component: 1900 - total flux cleaned = -0.0169641 Jy ! Component: 1950 - total flux cleaned = -0.0171576 Jy ! Component: 2000 - total flux cleaned = -0.0173975 Jy ! Component: 2050 - total flux cleaned = -0.0175404 Jy ! Component: 2100 - total flux cleaned = -0.0177539 Jy ! Component: 2150 - total flux cleaned = -0.0179894 Jy ! Component: 2200 - total flux cleaned = -0.0181301 Jy ! Component: 2250 - total flux cleaned = -0.0183168 Jy ! Component: 2300 - total flux cleaned = -0.0185025 Jy ! Component: 2350 - total flux cleaned = -0.0187105 Jy ! Component: 2400 - total flux cleaned = -0.0189409 Jy ! Component: 2450 - total flux cleaned = -0.0191937 Jy ! Component: 2500 - total flux cleaned = -0.0193543 Jy ! Component: 2550 - total flux cleaned = -0.019561 Jy ! Component: 2600 - total flux cleaned = -0.0197676 Jy ! Component: 2650 - total flux cleaned = -0.0199743 Jy ! Component: 2700 - total flux cleaned = -0.0201352 Jy ! Component: 2750 - total flux cleaned = -0.0203425 Jy ! Component: 2800 - total flux cleaned = -0.020527 Jy ! Component: 2850 - total flux cleaned = -0.0206425 Jy ! Component: 2900 - total flux cleaned = -0.0207815 Jy ! Component: 2950 - total flux cleaned = -0.0208977 Jy ! Component: 3000 - total flux cleaned = -0.0210611 Jy ! Component: 3050 - total flux cleaned = -0.0211313 Jy ! Component: 3100 - total flux cleaned = -0.0212253 Jy ! Component: 3150 - total flux cleaned = -0.0213673 Jy ! Component: 3200 - total flux cleaned = -0.0215343 Jy ! Component: 3250 - total flux cleaned = -0.0216785 Jy ! Component: 3300 - total flux cleaned = -0.0217755 Jy ! Component: 3350 - total flux cleaned = -0.0219219 Jy ! Component: 3400 - total flux cleaned = -0.0220451 Jy ! Component: 3450 - total flux cleaned = -0.0221696 Jy ! Component: 3500 - total flux cleaned = -0.0222954 Jy ! Component: 3550 - total flux cleaned = -0.0223717 Jy ! Component: 3600 - total flux cleaned = -0.0225009 Jy ! Component: 3650 - total flux cleaned = -0.0226314 Jy ! Component: 3700 - total flux cleaned = -0.0227637 Jy ! Component: 3750 - total flux cleaned = -0.0228445 Jy ! Component: 3800 - total flux cleaned = -0.0229268 Jy ! Component: 3850 - total flux cleaned = -0.0229829 Jy ! Component: 3900 - total flux cleaned = -0.0230399 Jy ! Component: 3950 - total flux cleaned = -0.0230984 Jy ! Component: 4000 - total flux cleaned = -0.0231287 Jy ! Component: 4050 - total flux cleaned = -0.0232213 Jy ! Total flux subtracted in 4096 components = -0.0232214 Jy ! Clean residual min=-0.001813 max=0.001788 Jy/beam ! Clean residual mean=-0.000053 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.377709 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 302 components and 0.377709 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0811+0146_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.318 x 5.376 at -31.26 degrees (North through East) ! Clean map min=-0.0038944 max=0.38548 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0811+0146_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.385481 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343705 0.343705 0.68741 1.37482 2.74964 5.49928 10.9986 21.9971 43.9942 87.9885 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.385 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 872.841 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0811+0146_X_uvs.log closed on Sat Nov 29 16:31:42 2014