! Started logfile: /d2/scr/pima/rv101_uvs/J0730-1141_X_uvs.log on Sat Nov 29 16:31:28 2014 obs /d2/scr/pima/rv101_uvs/J0730-1141_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0730-1141_X_uva.fits ! AN table 1: 90 integrations on 1 of 1 possible baselines. ! AN table 2: 10 integrations on 3 of 3 possible baselines. ! AN table 3: 22 integrations on 3 of 3 possible baselines. ! AN table 4: 22 integrations on 10 of 10 possible baselines. ! AN table 5: 11 integrations on 21 of 21 possible baselines. ! AN table 6: 22 integrations on 45 of 45 possible baselines. ! AN table 7: 10 integrations on 1 of 1 possible baselines. ! AN table 8: 9 integrations on 10 of 10 possible baselines. ! AN table 9: 9 integrations on 36 of 36 possible baselines. ! AN table 10: 18 integrations on 3 of 3 possible baselines. ! AN table 11: 9 integrations on 6 of 6 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 9 integrations on 3 of 3 possible baselines. ! AN table 14: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.903738 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 10928 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0730-1141_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 180 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 89 telescope corrections were flagged in sub-array 6. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 55 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 89 telescope corrections were flagged in sub-array 6. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 55 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 180 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 89 telescope corrections were flagged in sub-array 6. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 55 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 37 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 89 telescope corrections were flagged in sub-array 6. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! A total of 25 telescope corrections were flagged in sub-array 9. ! A total of 12 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 6 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 55 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=3.838780Jy sigma=12.858810 ! Fit after self-cal, rms=2.659992Jy sigma=9.103740 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.5582 mas, bmaj=1.888 mas, bpa=-7.939 degrees ! Estimated noise=3.39277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69655 Jy ! Component: 100 - total flux cleaned = 3.30207 Jy ! Total flux subtracted in 100 components = 3.30207 Jy ! Clean residual min=-0.065903 max=0.213387 Jy/beam ! Clean residual mean=0.000741 rms=0.015754 Jy/beam ! Combined flux in latest and established models = 3.30207 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 3.30207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.656508Jy sigma=1.976699 ! Fit after self-cal, rms=0.656474Jy sigma=1.976651 ! Inverting map ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224129 Jy ! Component: 100 - total flux cleaned = 0.336766 Jy ! Total flux subtracted in 100 components = 0.336766 Jy ! Clean residual min=-0.045986 max=0.073773 Jy/beam ! Clean residual mean=0.000544 rms=0.011467 Jy/beam ! Combined flux in latest and established models = 3.63884 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 3.63884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.529190Jy sigma=1.517583 ! Fit after self-cal, rms=0.529150Jy sigma=1.517506 ! Inverting map ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714578 Jy ! Component: 100 - total flux cleaned = 0.115917 Jy ! Total flux subtracted in 100 components = 0.115917 Jy ! Clean residual min=-0.046633 max=0.055108 Jy/beam ! Clean residual mean=0.000468 rms=0.010919 Jy/beam ! Combined flux in latest and established models = 3.75475 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 3.75475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507968Jy sigma=1.445349 ! Fit after self-cal, rms=0.507553Jy sigma=1.442498 ! Inverting map ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6758 mas, bmaj=2.1 mas, bpa=-7.287 degrees ! Estimated noise=2.77951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869215 Jy ! Component: 100 - total flux cleaned = 0.146684 Jy ! Component: 150 - total flux cleaned = 0.191787 Jy ! Component: 200 - total flux cleaned = 0.22625 Jy ! Total flux subtracted in 200 components = 0.22625 Jy ! Clean residual min=-0.043510 max=0.063063 Jy/beam ! Clean residual mean=0.005146 rms=0.011189 Jy/beam ! Combined flux in latest and established models = 3.981 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 59 components and 3.981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484703Jy sigma=1.365629 ! Fit after self-cal, rms=0.483772Jy sigma=1.361658 ! Inverting map ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (0.4, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.055203 Jy ! Component: 100 - total flux cleaned = 0.0854984 Jy ! Component: 150 - total flux cleaned = 0.108909 Jy ! Component: 200 - total flux cleaned = 0.128069 Jy ! Total flux subtracted in 200 components = 0.128069 Jy ! Clean residual min=-0.038573 max=0.052510 Jy/beam ! Clean residual mean=0.002788 rms=0.010158 Jy/beam ! Combined flux in latest and established models = 4.10907 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 4.10907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474562Jy sigma=1.337581 ! Fit after self-cal, rms=0.473651Jy sigma=1.332470 ! Inverting map ! Your choice of large map pixels excluded 1.28% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6758 x 2.1 at -7.287 degrees (North through East) ! Clean map min=-0.036472 max=3.503 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* MA 1.00* NL 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 1.05 NL 0.97 OV 0.98 PT 1.02 ! WF 0.83 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.02 NL 0.98 SC 0.97 WF 0.84 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NL 0.00* SC 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.99 HN 1.10 KP 1.00* LA 1.07 ! MK 0.97 NL 0.96 OV 0.98 PT 1.01 ! SC 0.98 WF 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* MA 1.00* NL 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HN 1.06 KP 1.00* LA 1.03 ! MA 0.95 NL 0.98 ON 0.88 PT 0.97 ! SC 1.03 WF 0.85 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 0.99 NL 0.99 OV 0.97 PT 0.93 ! WF 0.86 ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.99 HN 1.07 KP 1.00* LA 1.02 ! NL 0.98 OV 0.97 PT 0.93 SC 1.01 ! WF 0.86 ! ! A total of 42 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.02 NL 1.00 SC 1.02 WF 0.85 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NL 0.00* SC 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.99 HN 1.12 KP 1.00* LA 1.03 ! MK 0.98 NL 0.96 OV 0.94 PT 0.93 ! SC 1.04 WF 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.11 HN 1.11 MA 1.06 NL 1.11 ! ON 1.02 SC 0.99 WF 0.86 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HN 1.09 KP 1.00* LA 1.09 ! MA 1.06 NL 1.01 ON 1.03 PT 0.95 ! SC 0.99 WF 0.88 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 1.06 NL 1.00 OV 1.05 PT 0.92 ! WF 0.89 ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.99 HN 1.10 KP 1.00* LA 1.07 ! NL 1.01 OV 1.05 PT 0.92 SC 0.97 ! WF 0.88 ! ! A total of 42 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.07 NL 1.02 SC 0.97 WF 0.89 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NL 0.00* SC 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.97 HN 1.17 KP 1.00* LA 1.08 ! MK 0.97 NL 0.99 OV 1.03 PT 0.91 ! SC 0.99 WF 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.16 HN 1.09 MA 1.09 NL 1.15 ! ON 1.08 SC 1.03 WF 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 HN 1.09 KP 1.00* LA 1.08 ! MA 1.09 NL 1.03 ON 1.12 PT 0.99 ! SC 1.00 WF 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! MA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 1.04 NL 1.02 OV 1.02 PT 0.94 ! WF 0.98 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.03 HN 1.09 KP 1.00* LA 1.07 ! NL 1.02 OV 1.02 PT 0.95 SC 1.00 ! WF 0.97 ! ! A total of 42 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.08 NL 1.03 SC 0.99 WF 0.97 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! NL 0.00* SC 0.00* WF 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.04 HN 1.19 KP 1.00* LA 1.06 ! MK 1.01 NL 1.01 OV 1.01 PT 0.93 ! SC 1.02 WF 0.99 ! ! ! Fit before self-cal, rms=0.473651Jy sigma=1.332470 ! Fit after self-cal, rms=0.340868Jy sigma=0.891421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6708 mas, bmaj=2.15 mas, bpa=-7.135 degrees ! Estimated noise=2.87879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185261 Jy ! Component: 100 - total flux cleaned = 0.0193228 Jy ! Component: 150 - total flux cleaned = 0.0188077 Jy ! Component: 200 - total flux cleaned = 0.0177678 Jy ! Total flux subtracted in 200 components = 0.0177678 Jy ! Clean residual min=-0.022977 max=0.026703 Jy/beam ! Clean residual mean=0.000513 rms=0.005295 Jy/beam ! Combined flux in latest and established models = 4.12684 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 4.12684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337948Jy sigma=0.880251 ! Fit after self-cal, rms=0.337654Jy sigma=0.879097 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337654Jy sigma=0.879097 ! Fit after self-cal, rms=0.333943Jy sigma=0.868078 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6713 mas, bmaj=2.15 mas, bpa=-7.125 degrees ! Estimated noise=2.88044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601744 Jy ! Component: 100 - total flux cleaned = 0.00606943 Jy ! Component: 150 - total flux cleaned = 0.00607105 Jy ! Component: 200 - total flux cleaned = 0.00607118 Jy ! Total flux subtracted in 200 components = 0.00607118 Jy ! Clean residual min=-0.021148 max=0.025476 Jy/beam ! Clean residual mean=0.000454 rms=0.005035 Jy/beam ! Combined flux in latest and established models = 4.13291 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 119 components and 4.13291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332428Jy sigma=0.862823 ! Fit after self-cal, rms=0.332357Jy sigma=0.862526 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193475 Jy ! Component: 100 - total flux cleaned = 0.0227623 Jy ! Component: 150 - total flux cleaned = 0.0248911 Jy ! Component: 200 - total flux cleaned = 0.0257019 Jy ! Total flux subtracted in 200 components = 0.0257019 Jy ! Clean residual min=-0.021168 max=0.023176 Jy/beam ! Clean residual mean=0.000005 rms=0.004809 Jy/beam ! Combined flux in latest and established models = 4.15861 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 139 components and 4.15861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330282Jy sigma=0.856640 ! Fit after self-cal, rms=0.330186Jy sigma=0.856086 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (-12.2, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201129 Jy ! Component: 100 - total flux cleaned = 0.0175921 Jy ! Component: 150 - total flux cleaned = 0.0148457 Jy ! Component: 200 - total flux cleaned = 0.0127372 Jy ! Total flux subtracted in 200 components = 0.0127372 Jy ! Clean residual min=-0.020628 max=0.021639 Jy/beam ! Clean residual mean=-0.000174 rms=0.004654 Jy/beam ! Combined flux in latest and established models = 4.17135 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 4.17135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327740Jy sigma=0.850622 ! Fit after self-cal, rms=0.327662Jy sigma=0.849926 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327662Jy sigma=0.849926 ! Fit after self-cal, rms=0.304293Jy sigma=0.790020 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6715 mas, bmaj=2.15 mas, bpa=-7.134 degrees ! Estimated noise=2.88261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136477 Jy ! Component: 100 - total flux cleaned = -0.00267483 Jy ! Component: 150 - total flux cleaned = -0.0042742 Jy ! Component: 200 - total flux cleaned = -0.00464994 Jy ! Total flux subtracted in 200 components = -0.00464994 Jy ! Clean residual min=-0.018557 max=0.017287 Jy/beam ! Clean residual mean=-0.000018 rms=0.003991 Jy/beam ! Combined flux in latest and established models = 4.1667 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 170 components and 4.1667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303105Jy sigma=0.786472 ! Fit after self-cal, rms=0.303085Jy sigma=0.786298 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034517 Jy ! Component: 100 - total flux cleaned = -0.00070589 Jy ! Component: 150 - total flux cleaned = -0.00138061 Jy ! Component: 200 - total flux cleaned = -0.00170553 Jy ! Total flux subtracted in 200 components = -0.00170553 Jy ! Clean residual min=-0.018533 max=0.016424 Jy/beam ! Clean residual mean=0.000011 rms=0.003938 Jy/beam ! Combined flux in latest and established models = 4.16499 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 179 components and 4.16499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302275Jy sigma=0.783908 ! Fit after self-cal, rms=0.302256Jy sigma=0.783829 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302256Jy sigma=0.783829 ! Fit after self-cal, rms=0.292110Jy sigma=0.766844 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=1.992 mas, bmaj=3.095 mas, bpa=-6.988 degrees ! Estimated noise=3.83181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037816 Jy ! Component: 100 - total flux cleaned = 0.00416771 Jy ! Component: 150 - total flux cleaned = 0.00450761 Jy ! Component: 200 - total flux cleaned = 0.00545524 Jy ! Total flux subtracted in 200 components = 0.00545524 Jy ! Clean residual min=-0.024547 max=0.021005 Jy/beam ! Clean residual mean=-0.000234 rms=0.005469 Jy/beam ! Combined flux in latest and established models = 4.17045 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 195 components and 4.17045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291975Jy sigma=0.764563 ! Fit after self-cal, rms=0.291942Jy sigma=0.764349 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513739 Jy ! Component: 100 - total flux cleaned = 0.000796577 Jy ! Component: 150 - total flux cleaned = 0.00106619 Jy ! Component: 200 - total flux cleaned = 0.00131789 Jy ! Total flux subtracted in 200 components = 0.00131789 Jy ! Clean residual min=-0.024220 max=0.019524 Jy/beam ! Clean residual mean=-0.000293 rms=0.005378 Jy/beam ! Combined flux in latest and established models = 4.17177 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 201 components and 4.17177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291899Jy sigma=0.763570 ! Fit after self-cal, rms=0.291900Jy sigma=0.763481 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6714 mas, bmaj=2.15 mas, bpa=-7.148 degrees ! Estimated noise=2.88335 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6714 x 2.15 at -7.148 degrees (North through East) ! Clean map min=-0.017814 max=3.5044 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291900Jy sigma=0.763481 ! Fit after self-cal, rms=0.264601Jy sigma=0.675976 ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6713 mas, bmaj=2.15 mas, bpa=-7.16 degrees ! Estimated noise=2.88004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00559288 Jy ! Component: 100 - total flux cleaned = -0.00620035 Jy ! Component: 150 - total flux cleaned = -0.0070027 Jy ! Component: 200 - total flux cleaned = -0.00749968 Jy ! Total flux subtracted in 200 components = -0.00749968 Jy ! Clean residual min=-0.015434 max=0.014071 Jy/beam ! Clean residual mean=-0.000185 rms=0.003187 Jy/beam ! Combined flux in latest and established models = 4.16427 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 217 components and 4.16427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263911Jy sigma=0.673831 ! Fit after self-cal, rms=0.263880Jy sigma=0.673697 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139163 Jy ! Component: 100 - total flux cleaned = -0.00163254 Jy ! Component: 150 - total flux cleaned = -0.00185581 Jy ! Component: 200 - total flux cleaned = -0.00185546 Jy ! Total flux subtracted in 200 components = -0.00185546 Jy ! Clean residual min=-0.015378 max=0.013964 Jy/beam ! Clean residual mean=-0.000152 rms=0.003162 Jy/beam ! Combined flux in latest and established models = 4.16241 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 232 components and 4.16241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263457Jy sigma=0.672502 ! Fit after self-cal, rms=0.263456Jy sigma=0.672449 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263456Jy sigma=0.672449 ! Fit after self-cal, rms=0.263337Jy sigma=0.672136 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.5578 mas, bmaj=1.932 mas, bpa=-7.477 degrees ! Estimated noise=3.49939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70807 Jy ! Component: 100 - total flux cleaned = 3.31179 Jy ! Component: 150 - total flux cleaned = 3.52922 Jy ! Component: 200 - total flux cleaned = 3.63776 Jy ! Total flux subtracted in 200 components = 3.63776 Jy ! Clean residual min=-0.026626 max=0.051988 Jy/beam ! Clean residual mean=0.000480 rms=0.006239 Jy/beam ! Combined flux in latest and established models = 3.63776 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 3.63776 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6714 mas, bmaj=2.151 mas, bpa=-7.162 degrees ! Estimated noise=2.88037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105862 Jy ! Component: 100 - total flux cleaned = 0.178815 Jy ! Component: 150 - total flux cleaned = 0.235621 Jy ! Component: 200 - total flux cleaned = 0.281091 Jy ! Total flux subtracted in 200 components = 0.281091 Jy ! Clean residual min=-0.019905 max=0.030203 Jy/beam ! Clean residual mean=0.003986 rms=0.005629 Jy/beam ! Combined flux in latest and established models = 3.91885 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 55 components and 3.91885 Jy ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (-0.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376973 Jy ! Component: 100 - total flux cleaned = 0.0694064 Jy ! Component: 150 - total flux cleaned = 0.0964135 Jy ! Component: 200 - total flux cleaned = 0.119637 Jy ! Total flux subtracted in 200 components = 0.119637 Jy ! Clean residual min=-0.017731 max=0.021091 Jy/beam ! Clean residual mean=0.001958 rms=0.004220 Jy/beam ! Combined flux in latest and established models = 4.03849 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 87 components and 4.03849 Jy ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (13.2, 43.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225829 Jy ! Component: 100 - total flux cleaned = 0.0407545 Jy ! Component: 150 - total flux cleaned = 0.0566773 Jy ! Component: 200 - total flux cleaned = 0.0680392 Jy ! Total flux subtracted in 200 components = 0.0680392 Jy ! Clean residual min=-0.016251 max=0.017055 Jy/beam ! Clean residual mean=0.000837 rms=0.003688 Jy/beam ! Combined flux in latest and established models = 4.10653 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 113 components and 4.10653 Jy ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Added new window around map position (5.6, 49.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114958 Jy ! Component: 100 - total flux cleaned = 0.0164687 Jy ! Component: 150 - total flux cleaned = 0.0192886 Jy ! Component: 200 - total flux cleaned = 0.0228446 Jy ! Total flux subtracted in 200 components = 0.0228446 Jy ! Clean residual min=-0.015720 max=0.014613 Jy/beam ! Clean residual mean=0.000471 rms=0.003493 Jy/beam ! Combined flux in latest and established models = 4.12937 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 136 components and 4.12937 Jy ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=1.991 mas, bmaj=3.095 mas, bpa=-6.997 degrees ! Estimated noise=3.82876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134839 Jy ! Component: 100 - total flux cleaned = 0.0210405 Jy ! Component: 150 - total flux cleaned = 0.0241141 Jy ! Component: 200 - total flux cleaned = 0.0272837 Jy ! Total flux subtracted in 200 components = 0.0272837 Jy ! Clean residual min=-0.019461 max=0.018546 Jy/beam ! Clean residual mean=-0.000036 rms=0.004825 Jy/beam ! Combined flux in latest and established models = 4.15666 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249686 Jy ! Component: 100 - total flux cleaned = 0.0038061 Jy ! Component: 150 - total flux cleaned = 0.00442872 Jy ! Component: 200 - total flux cleaned = 0.0050256 Jy ! Total flux subtracted in 200 components = 0.0050256 Jy ! Clean residual min=-0.019358 max=0.018070 Jy/beam ! Clean residual mean=-0.000286 rms=0.004703 Jy/beam ! Combined flux in latest and established models = 4.16168 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 174 components and 4.16168 Jy ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! Estimated beam: bmin=0.6714 mas, bmaj=2.151 mas, bpa=-7.162 degrees ! Estimated noise=2.88037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00600852 Jy ! Component: 100 - total flux cleaned = -0.00680553 Jy ! Component: 150 - total flux cleaned = -0.00716519 Jy ! Component: 200 - total flux cleaned = -0.00648886 Jy ! Total flux subtracted in 200 components = -0.00648886 Jy ! Clean residual min=-0.015136 max=0.012740 Jy/beam ! Clean residual mean=-0.000008 rms=0.003228 Jy/beam ! Combined flux in latest and established models = 4.15519 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 195 components and 4.15519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262902Jy sigma=0.674776 ! Fit after self-cal, rms=0.262375Jy sigma=0.672287 wmodel /d2/scr/pima/rv101_uvs/J0730-1141_X_map.mod ! Writing 195 model components to file: /d2/scr/pima/rv101_uvs/J0730-1141_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0730-1141_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0730-1141_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0730-1141_X_map.win ! wwins: Wrote 10 windows to /d2/scr/pima/rv101_uvs/J0730-1141_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00606691 Jy ! Component: 100 - total flux cleaned = -0.00990065 Jy ! Component: 150 - total flux cleaned = -0.0126667 Jy ! Component: 200 - total flux cleaned = -0.0144517 Jy ! Component: 250 - total flux cleaned = -0.0166217 Jy ! Component: 300 - total flux cleaned = -0.0187373 Jy ! Component: 350 - total flux cleaned = -0.0206017 Jy ! Component: 400 - total flux cleaned = -0.0228396 Jy ! Component: 450 - total flux cleaned = -0.0246401 Jy ! Component: 500 - total flux cleaned = -0.0264165 Jy ! Component: 550 - total flux cleaned = -0.0281654 Jy ! Component: 600 - total flux cleaned = -0.0296992 Jy ! Component: 650 - total flux cleaned = -0.0310229 Jy ! Component: 700 - total flux cleaned = -0.0321447 Jy ! Component: 750 - total flux cleaned = -0.0336216 Jy ! Component: 800 - total flux cleaned = -0.0348964 Jy ! Component: 850 - total flux cleaned = -0.0359784 Jy ! Component: 900 - total flux cleaned = -0.0370487 Jy ! Component: 950 - total flux cleaned = -0.0379306 Jy ! Component: 1000 - total flux cleaned = -0.0388048 Jy ! Component: 1050 - total flux cleaned = -0.0400158 Jy ! Component: 1100 - total flux cleaned = -0.0410423 Jy ! Component: 1150 - total flux cleaned = -0.0417206 Jy ! Component: 1200 - total flux cleaned = -0.0425603 Jy ! Component: 1250 - total flux cleaned = -0.0435591 Jy ! Component: 1300 - total flux cleaned = -0.0442194 Jy ! Component: 1350 - total flux cleaned = -0.0447108 Jy ! Component: 1400 - total flux cleaned = -0.045523 Jy ! Component: 1450 - total flux cleaned = -0.0461688 Jy ! Component: 1500 - total flux cleaned = -0.0471281 Jy ! Component: 1550 - total flux cleaned = -0.0479199 Jy ! Component: 1600 - total flux cleaned = -0.0485495 Jy ! Component: 1650 - total flux cleaned = -0.0494867 Jy ! Component: 1700 - total flux cleaned = -0.0501062 Jy ! Component: 1750 - total flux cleaned = -0.0508747 Jy ! Component: 1800 - total flux cleaned = -0.0516372 Jy ! Component: 1850 - total flux cleaned = -0.052395 Jy ! Component: 1900 - total flux cleaned = -0.0529964 Jy ! Component: 1950 - total flux cleaned = -0.053744 Jy ! Component: 2000 - total flux cleaned = -0.0540414 Jy ! Component: 2050 - total flux cleaned = -0.0547793 Jy ! Component: 2100 - total flux cleaned = -0.0556598 Jy ! Component: 2150 - total flux cleaned = -0.0560973 Jy ! Component: 2200 - total flux cleaned = -0.0566766 Jy ! Component: 2250 - total flux cleaned = -0.0569654 Jy ! Component: 2300 - total flux cleaned = -0.0575388 Jy ! Component: 2350 - total flux cleaned = -0.0583923 Jy ! Component: 2400 - total flux cleaned = -0.058817 Jy ! Component: 2450 - total flux cleaned = -0.0593801 Jy ! Component: 2500 - total flux cleaned = -0.0596602 Jy ! Component: 2550 - total flux cleaned = -0.0602169 Jy ! Component: 2600 - total flux cleaned = -0.0609086 Jy ! Component: 2650 - total flux cleaned = -0.0611837 Jy ! Component: 2700 - total flux cleaned = -0.0615947 Jy ! Component: 2750 - total flux cleaned = -0.0620038 Jy ! Component: 2800 - total flux cleaned = -0.0626819 Jy ! Component: 2850 - total flux cleaned = -0.0630865 Jy ! Component: 2900 - total flux cleaned = -0.0634888 Jy ! Component: 2950 - total flux cleaned = -0.0637557 Jy ! Component: 3000 - total flux cleaned = -0.0641541 Jy ! Component: 3050 - total flux cleaned = -0.0642864 Jy ! Component: 3100 - total flux cleaned = -0.0645495 Jy ! Component: 3150 - total flux cleaned = -0.064943 Jy ! Component: 3200 - total flux cleaned = -0.0653338 Jy ! Component: 3250 - total flux cleaned = -0.0658523 Jy ! Component: 3300 - total flux cleaned = -0.0659811 Jy ! Component: 3350 - total flux cleaned = -0.0662382 Jy ! Component: 3400 - total flux cleaned = -0.0664932 Jy ! Component: 3450 - total flux cleaned = -0.0663659 Jy ! Component: 3500 - total flux cleaned = -0.0670005 Jy ! Component: 3550 - total flux cleaned = -0.0672529 Jy ! Component: 3600 - total flux cleaned = -0.0673785 Jy ! Component: 3650 - total flux cleaned = -0.0677546 Jy ! Component: 3700 - total flux cleaned = -0.0680039 Jy ! Component: 3750 - total flux cleaned = -0.0682523 Jy ! Component: 3800 - total flux cleaned = -0.0683758 Jy ! Component: 3850 - total flux cleaned = -0.0683756 Jy ! Component: 3900 - total flux cleaned = -0.0686208 Jy ! Component: 3950 - total flux cleaned = -0.0687432 Jy ! Component: 4000 - total flux cleaned = -0.0689867 Jy ! Component: 4050 - total flux cleaned = -0.06935 Jy ! Total flux subtracted in 4096 components = -0.0691086 Jy ! Clean residual min=-0.007425 max=0.007058 Jy/beam ! Clean residual mean=-0.000018 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 4.08608 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 533 components and 4.08608 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0730-1141_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6714 x 2.151 at -7.162 degrees (North through East) ! Clean map min=-0.011928 max=3.5155 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0730-1141_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.51554 invert ! Inverting map ! Your choice of large map pixels excluded 1.38% of the data. ! The x-axis pixel size should ideally be below 0.1918 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00211522 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.180503 0.180503 0.361007 0.722013 1.44403 2.88805 5.77611 11.5522 23.1044 46.2088 92.4177 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0063 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.515 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1662.02 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0730-1141_X_uvs.log closed on Sat Nov 29 16:31:34 2014