! Started logfile: /d2/scr/pima/rv101_uvs/J0721+7120_S_uvs.log on Sat Nov 29 13:51:04 2014 obs /d2/scr/pima/rv101_uvs/J0721+7120_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0721+7120_S_uva.fits ! AN table 1: 10 integrations on 6 of 6 possible baselines. ! AN table 2: 5 integrations on 3 of 3 possible baselines. ! AN table 3: 10 integrations on 10 of 10 possible baselines. ! AN table 4: 20 integrations on 6 of 6 possible baselines. ! AN table 5: 2 integrations on 36 of 36 possible baselines. ! AN table 6: 2 integrations on 3 of 3 possible baselines. ! AN table 7: 5 integrations on 36 of 36 possible baselines. ! AN table 8: 15 integrations on 3 of 3 possible baselines. ! AN table 9: 5 integrations on 55 of 55 possible baselines. ! AN table 10: 5 integrations on 21 of 21 possible baselines. ! AN table 11: 2 integrations on 1 of 1 possible baselines. ! AN table 12: 2 integrations on 3 of 3 possible baselines. ! AN table 13: 4 integrations on 66 of 66 possible baselines. ! AN table 14: 2 integrations on 36 of 36 possible baselines. ! AN table 15: 5 integrations on 6 of 6 possible baselines. ! AN table 16: 5 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.747991 visibilities/baseline/integration-bin. ! Found source: J0721+7120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5212 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0721+7120_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 10 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 9 telescope corrections were flagged in sub-array 13. ! A total of 5 telescope corrections were flagged in sub-array 15. ! A total of 26 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 20 telescope corrections were flagged in sub-array 3. ! A total of 32 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 45 telescope corrections were flagged in sub-array 8. ! A total of 22 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 14. ! A total of 11 telescope corrections were flagged in sub-array 15. ! A total of 26 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 10 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 9 telescope corrections were flagged in sub-array 13. ! A total of 5 telescope corrections were flagged in sub-array 15. ! A total of 22 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 21 telescope corrections were flagged in sub-array 8. ! A total of 22 telescope corrections were flagged in sub-array 9. ! A total of 10 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 13. ! A total of 2 telescope corrections were flagged in sub-array 14. ! A total of 5 telescope corrections were flagged in sub-array 15. ! A total of 26 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=1.852613Jy sigma=5.032107 ! Fit after self-cal, rms=0.972861Jy sigma=1.108009 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=2.78 mas, bpa=54.9 degrees ! Estimated noise=4.46986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.722707 Jy ! Component: 100 - total flux cleaned = 0.881384 Jy ! Total flux subtracted in 100 components = 0.881384 Jy ! Clean residual min=-0.042809 max=0.069121 Jy/beam ! Clean residual mean=-0.000124 rms=0.008642 Jy/beam ! Combined flux in latest and established models = 0.881384 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.881384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.999797Jy sigma=0.971315 ! Fit after self-cal, rms=0.999776Jy sigma=0.971285 ! Inverting map ! Added new window around map position (3, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685359 Jy ! Component: 100 - total flux cleaned = 0.0876396 Jy ! Total flux subtracted in 100 components = 0.0876396 Jy ! Clean residual min=-0.042728 max=0.059311 Jy/beam ! Clean residual mean=-0.000121 rms=0.008196 Jy/beam ! Combined flux in latest and established models = 0.969024 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.969024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.985502Jy sigma=0.942087 ! Fit after self-cal, rms=0.984978Jy sigma=0.938245 ! Inverting map ! Added new window around map position (-3.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320577 Jy ! Component: 100 - total flux cleaned = 0.0357031 Jy ! Total flux subtracted in 100 components = 0.0357031 Jy ! Clean residual min=-0.042419 max=0.034192 Jy/beam ! Clean residual mean=-0.000120 rms=0.007831 Jy/beam ! Combined flux in latest and established models = 1.00473 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 1.00473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.978698Jy sigma=0.922455 ! Fit after self-cal, rms=0.978593Jy sigma=0.922157 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=3.358 mas, bpa=50.21 degrees ! Estimated noise=3.39727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0143956 Jy ! Component: 100 - total flux cleaned = -0.0162933 Jy ! Component: 150 - total flux cleaned = -0.017121 Jy ! Component: 200 - total flux cleaned = -0.0171288 Jy ! Total flux subtracted in 200 components = -0.0171288 Jy ! Clean residual min=-0.038245 max=0.023557 Jy/beam ! Clean residual mean=-0.004487 rms=0.006441 Jy/beam ! Combined flux in latest and established models = 0.987599 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.987598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.976123Jy sigma=0.904761 ! Fit after self-cal, rms=0.976083Jy sigma=0.904544 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 3.358 at 50.21 degrees (North through East) ! Clean map min=-0.03624 max=0.8975 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* ON 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* NY 0.00* OV 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* ON 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.95 HN 0.99 KP 1.17 LA 1.05 ! MA 1.00* MK 0.90 NL 1.04 PT 1.03 ! SC 0.94 ! ! A total of 9 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 0.00* NL 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* ON 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* NY 0.00* OV 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* ON 1.00* OV 1.00* PT 1.00* ! WF 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! NY 0.00* OV 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 15. ! Telescope amplitude corrections in sub-array 15: ! MA 1.00* NL 1.00* NY 1.00* ON 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 16. ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* NY 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! ! Fit before self-cal, rms=0.976083Jy sigma=0.904544 ! Fit after self-cal, rms=0.963173Jy sigma=0.870977 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.25 degrees ! Estimated noise=3.49373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00098121 Jy ! Component: 100 - total flux cleaned = 0.000616302 Jy ! Component: 150 - total flux cleaned = 0.00210538 Jy ! Component: 200 - total flux cleaned = 0.00282988 Jy ! Total flux subtracted in 200 components = 0.00282988 Jy ! Clean residual min=-0.035635 max=0.025157 Jy/beam ! Clean residual mean=-0.003725 rms=0.006057 Jy/beam ! Combined flux in latest and established models = 0.990428 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.990428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.959037Jy sigma=0.870261 ! Fit after self-cal, rms=0.959028Jy sigma=0.870164 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.959028Jy sigma=0.870164 ! Fit after self-cal, rms=0.959028Jy sigma=0.870157 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.23 degrees ! Estimated noise=3.49333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156127 Jy ! Component: 100 - total flux cleaned = 0.000168029 Jy ! Component: 150 - total flux cleaned = -0.000433914 Jy ! Component: 200 - total flux cleaned = -0.000426586 Jy ! Total flux subtracted in 200 components = -0.000426586 Jy ! Clean residual min=-0.035384 max=0.025717 Jy/beam ! Clean residual mean=-0.003720 rms=0.006042 Jy/beam ! Combined flux in latest and established models = 0.990002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.990002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.956744Jy sigma=0.867371 ! Fit after self-cal, rms=0.956721Jy sigma=0.867309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466978 Jy ! Component: 100 - total flux cleaned = -0.000458152 Jy ! Component: 150 - total flux cleaned = -0.00045626 Jy ! Component: 200 - total flux cleaned = -0.000951968 Jy ! Total flux subtracted in 200 components = -0.000951968 Jy ! Clean residual min=-0.035394 max=0.026469 Jy/beam ! Clean residual mean=-0.003711 rms=0.006031 Jy/beam ! Combined flux in latest and established models = 0.98905 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.98905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.955136Jy sigma=0.864920 ! Fit after self-cal, rms=0.955112Jy sigma=0.864870 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.955112Jy sigma=0.864870 ! Fit after self-cal, rms=0.955112Jy sigma=0.864861 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.23 degrees ! Estimated noise=3.49357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534254 Jy ! Component: 100 - total flux cleaned = 0.000517924 Jy ! Component: 150 - total flux cleaned = 0.000504551 Jy ! Component: 200 - total flux cleaned = 8.97962e-05 Jy ! Total flux subtracted in 200 components = 8.97962e-05 Jy ! Clean residual min=-0.035319 max=0.026857 Jy/beam ! Clean residual mean=-0.003712 rms=0.006022 Jy/beam ! Combined flux in latest and established models = 0.98914 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.989139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.953776Jy sigma=0.863220 ! Fit after self-cal, rms=0.953754Jy sigma=0.863180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.21343e-05 Jy ! Component: 100 - total flux cleaned = 0.000457066 Jy ! Component: 150 - total flux cleaned = 0.000451944 Jy ! Component: 200 - total flux cleaned = 0.000446992 Jy ! Total flux subtracted in 200 components = 0.000446992 Jy ! Clean residual min=-0.035252 max=0.027057 Jy/beam ! Clean residual mean=-0.003717 rms=0.006010 Jy/beam ! Combined flux in latest and established models = 0.989586 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.989587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952664Jy sigma=0.861674 ! Fit after self-cal, rms=0.952643Jy sigma=0.861649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952643Jy sigma=0.861649 ! Fit after self-cal, rms=0.952643Jy sigma=0.861644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=9.366 mas, bpa=35.45 degrees ! Estimated noise=4.72292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00753876 Jy ! Component: 100 - total flux cleaned = -0.00868307 Jy ! Component: 150 - total flux cleaned = -0.00940697 Jy ! Component: 200 - total flux cleaned = -0.0100307 Jy ! Total flux subtracted in 200 components = -0.0100307 Jy ! Clean residual min=-0.037223 max=0.013011 Jy/beam ! Clean residual mean=-0.010747 rms=0.006271 Jy/beam ! Combined flux in latest and established models = 0.979556 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.979556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952415Jy sigma=0.865928 ! Fit after self-cal, rms=0.952433Jy sigma=0.865758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182793 Jy ! Component: 100 - total flux cleaned = -0.000354086 Jy ! Component: 150 - total flux cleaned = -0.000353774 Jy ! Component: 200 - total flux cleaned = -0.000511401 Jy ! Total flux subtracted in 200 components = -0.000511401 Jy ! Clean residual min=-0.037577 max=0.013051 Jy/beam ! Clean residual mean=-0.010731 rms=0.006267 Jy/beam ! Combined flux in latest and established models = 0.979044 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.979044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952535Jy sigma=0.867809 ! Fit after self-cal, rms=0.952537Jy sigma=0.867763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.24 degrees ! Estimated noise=3.4938 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 3.36 at 58.24 degrees (North through East) ! Clean map min=-0.033237 max=0.90223 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952537Jy sigma=0.867763 ! Fit after self-cal, rms=0.952534Jy sigma=0.867537 ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.24 degrees ! Estimated noise=3.49382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100488 Jy ! Component: 100 - total flux cleaned = 0.0101089 Jy ! Component: 150 - total flux cleaned = 0.0101153 Jy ! Component: 200 - total flux cleaned = 0.00973009 Jy ! Total flux subtracted in 200 components = 0.00973009 Jy ! Clean residual min=-0.035370 max=0.027273 Jy/beam ! Clean residual mean=-0.003708 rms=0.006012 Jy/beam ! Combined flux in latest and established models = 0.988775 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.988774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.951870Jy sigma=0.860193 ! Fit after self-cal, rms=0.951842Jy sigma=0.860143 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765575 Jy ! Component: 100 - total flux cleaned = 0.000761021 Jy ! Component: 150 - total flux cleaned = 0.000763866 Jy ! Component: 200 - total flux cleaned = 0.000761552 Jy ! Total flux subtracted in 200 components = 0.000761552 Jy ! Clean residual min=-0.035192 max=0.027565 Jy/beam ! Clean residual mean=-0.003716 rms=0.006001 Jy/beam ! Combined flux in latest and established models = 0.989536 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.989536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.951026Jy sigma=0.859313 ! Fit after self-cal, rms=0.951009Jy sigma=0.859294 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.951009Jy sigma=0.859294 ! Fit after self-cal, rms=0.951009Jy sigma=0.859229 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=2.791 mas, bpa=63.59 degrees ! Estimated noise=4.59843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.724246 Jy ! Component: 100 - total flux cleaned = 0.888067 Jy ! Component: 150 - total flux cleaned = 0.967565 Jy ! Component: 200 - total flux cleaned = 0.996662 Jy ! Total flux subtracted in 200 components = 0.996662 Jy ! Clean residual min=-0.040222 max=0.037445 Jy/beam ! Clean residual mean=-0.000114 rms=0.008023 Jy/beam ! Combined flux in latest and established models = 0.996661 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.996661 Jy ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.25 degrees ! Estimated noise=3.49414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0143066 Jy ! Component: 100 - total flux cleaned = -0.0143712 Jy ! Component: 150 - total flux cleaned = -0.0132858 Jy ! Component: 200 - total flux cleaned = -0.0122596 Jy ! Total flux subtracted in 200 components = -0.0122596 Jy ! Clean residual min=-0.035784 max=0.024718 Jy/beam ! Clean residual mean=-0.003665 rms=0.006125 Jy/beam ! Combined flux in latest and established models = 0.984402 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.984402 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=9.366 mas, bpa=35.46 degrees ! Estimated noise=4.72337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000976819 Jy ! Component: 100 - total flux cleaned = -0.000756701 Jy ! Component: 150 - total flux cleaned = -0.00213734 Jy ! Component: 200 - total flux cleaned = -0.00298291 Jy ! Total flux subtracted in 200 components = -0.00298291 Jy ! Clean residual min=-0.036825 max=0.012596 Jy/beam ! Clean residual mean=-0.010804 rms=0.006192 Jy/beam ! Combined flux in latest and established models = 0.981419 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000711153 Jy ! Component: 100 - total flux cleaned = -0.00131228 Jy ! Component: 150 - total flux cleaned = -0.0018381 Jy ! Component: 200 - total flux cleaned = -0.0023052 Jy ! Total flux subtracted in 200 components = -0.0023052 Jy ! Clean residual min=-0.037264 max=0.012821 Jy/beam ! Clean residual mean=-0.010734 rms=0.006223 Jy/beam ! Combined flux in latest and established models = 0.979114 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.979114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=3.36 mas, bpa=58.25 degrees ! Estimated noise=3.49414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530626 Jy ! Component: 100 - total flux cleaned = 0.00221322 Jy ! Component: 150 - total flux cleaned = 0.00305853 Jy ! Component: 200 - total flux cleaned = 0.00454736 Jy ! Total flux subtracted in 200 components = 0.00454736 Jy ! Clean residual min=-0.036282 max=0.026765 Jy/beam ! Clean residual mean=-0.003657 rms=0.006088 Jy/beam ! Combined flux in latest and established models = 0.983661 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.983661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.959962Jy sigma=0.871110 ! Fit after self-cal, rms=0.960039Jy sigma=0.870730 wmodel /d2/scr/pima/rv101_uvs/J0721+7120_S_map.mod ! Writing 40 model components to file: /d2/scr/pima/rv101_uvs/J0721+7120_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0721+7120_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0721+7120_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0721+7120_S_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J0721+7120_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0159835 Jy ! Component: 100 - total flux cleaned = -0.026928 Jy ! Component: 150 - total flux cleaned = -0.0345347 Jy ! Component: 200 - total flux cleaned = -0.0423581 Jy ! Component: 250 - total flux cleaned = -0.0504143 Jy ! Component: 300 - total flux cleaned = -0.0591949 Jy ! Component: 350 - total flux cleaned = -0.067739 Jy ! Component: 400 - total flux cleaned = -0.0765249 Jy ! Component: 450 - total flux cleaned = -0.0850966 Jy ! Component: 500 - total flux cleaned = -0.0930457 Jy ! Component: 550 - total flux cleaned = -0.100421 Jy ! Component: 600 - total flux cleaned = -0.10725 Jy ! Component: 650 - total flux cleaned = -0.114401 Jy ! Component: 700 - total flux cleaned = -0.121446 Jy ! Component: 750 - total flux cleaned = -0.127171 Jy ! Component: 800 - total flux cleaned = -0.132824 Jy ! Component: 850 - total flux cleaned = -0.138405 Jy ! Component: 900 - total flux cleaned = -0.14392 Jy ! Component: 950 - total flux cleaned = -0.149364 Jy ! Component: 1000 - total flux cleaned = -0.15436 Jy ! Component: 1050 - total flux cleaned = -0.159303 Jy ! Component: 1100 - total flux cleaned = -0.164946 Jy ! Component: 1150 - total flux cleaned = -0.170156 Jy ! Component: 1200 - total flux cleaned = -0.175314 Jy ! Component: 1250 - total flux cleaned = -0.180419 Jy ! Component: 1300 - total flux cleaned = -0.185114 Jy ! Component: 1350 - total flux cleaned = -0.190123 Jy ! Component: 1400 - total flux cleaned = -0.194729 Jy ! Component: 1450 - total flux cleaned = -0.199646 Jy ! Component: 1500 - total flux cleaned = -0.203822 Jy ! Component: 1550 - total flux cleaned = -0.208649 Jy ! Component: 1600 - total flux cleaned = -0.212068 Jy ! Component: 1650 - total flux cleaned = -0.216475 Jy ! Component: 1700 - total flux cleaned = -0.219837 Jy ! Component: 1750 - total flux cleaned = -0.223838 Jy ! Component: 1800 - total flux cleaned = -0.226816 Jy ! Component: 1850 - total flux cleaned = -0.229775 Jy ! Component: 1900 - total flux cleaned = -0.233035 Jy ! Component: 1950 - total flux cleaned = -0.235948 Jy ! Component: 2000 - total flux cleaned = -0.239483 Jy ! Component: 2050 - total flux cleaned = -0.241716 Jy ! Component: 2100 - total flux cleaned = -0.244566 Jy ! Component: 2150 - total flux cleaned = -0.248024 Jy ! Component: 2200 - total flux cleaned = -0.250521 Jy ! Component: 2250 - total flux cleaned = -0.253622 Jy ! Component: 2300 - total flux cleaned = -0.256087 Jy ! Component: 2350 - total flux cleaned = -0.258535 Jy ! Component: 2400 - total flux cleaned = -0.260666 Jy ! Component: 2450 - total flux cleaned = -0.263083 Jy ! Component: 2500 - total flux cleaned = -0.266085 Jy ! Component: 2550 - total flux cleaned = -0.267874 Jy ! Component: 2600 - total flux cleaned = -0.270542 Jy ! Component: 2650 - total flux cleaned = -0.272899 Jy ! Component: 2700 - total flux cleaned = -0.274364 Jy ! Component: 2750 - total flux cleaned = -0.276112 Jy ! Component: 2800 - total flux cleaned = -0.277853 Jy ! Component: 2850 - total flux cleaned = -0.279583 Jy ! Component: 2900 - total flux cleaned = -0.281877 Jy ! Component: 2950 - total flux cleaned = -0.283586 Jy ! Component: 3000 - total flux cleaned = -0.285003 Jy ! Component: 3050 - total flux cleaned = -0.286413 Jy ! Component: 3100 - total flux cleaned = -0.288375 Jy ! Component: 3150 - total flux cleaned = -0.28977 Jy ! Component: 3200 - total flux cleaned = -0.290881 Jy ! Component: 3250 - total flux cleaned = -0.29309 Jy ! Component: 3300 - total flux cleaned = -0.293915 Jy ! Component: 3350 - total flux cleaned = -0.295557 Jy ! Component: 3400 - total flux cleaned = -0.296919 Jy ! Component: 3450 - total flux cleaned = -0.298003 Jy ! Component: 3500 - total flux cleaned = -0.29989 Jy ! Component: 3550 - total flux cleaned = -0.300696 Jy ! Component: 3600 - total flux cleaned = -0.302298 Jy ! Component: 3650 - total flux cleaned = -0.303625 Jy ! Component: 3700 - total flux cleaned = -0.304684 Jy ! Component: 3750 - total flux cleaned = -0.305736 Jy ! Component: 3800 - total flux cleaned = -0.307571 Jy ! Component: 3850 - total flux cleaned = -0.308091 Jy ! Component: 3900 - total flux cleaned = -0.309391 Jy ! Component: 3950 - total flux cleaned = -0.310426 Jy ! Component: 4000 - total flux cleaned = -0.310685 Jy ! Component: 4050 - total flux cleaned = -0.311711 Jy ! Total flux subtracted in 4096 components = -0.312734 Jy ! Clean residual min=-0.013930 max=0.012751 Jy/beam ! Clean residual mean=-0.000749 rms=0.004218 Jy/beam ! Combined flux in latest and established models = 0.670927 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 346 components and 0.670927 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0721+7120_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 3.36 at 58.25 degrees (North through East) ! Clean map min=-0.029074 max=0.93121 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0721+7120_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.931212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00421509 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.35794 1.35794 2.71587 5.43175 10.8635 21.727 43.454 86.908 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0126 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.931 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 220.923 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0721+7120_S_uvs.log closed on Sat Nov 29 13:51:09 2014