! Started logfile: /d2/scr/pima/rv101_uvs/J0629-1959_X_uvs.log on Sat Nov 29 16:30:55 2014 obs /d2/scr/pima/rv101_uvs/J0629-1959_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0629-1959_X_uva.fits ! AN table 1: 125 integrations on 3 of 3 possible baselines. ! AN table 2: 28 integrations on 10 of 10 possible baselines. ! AN table 3: 9 integrations on 1 of 1 possible baselines. ! AN table 4: 9 integrations on 28 of 28 possible baselines. ! AN table 5: 27 integrations on 36 of 36 possible baselines. ! AN table 6: 9 integrations on 1 of 1 possible baselines. ! AN table 7: 18 integrations on 45 of 45 possible baselines. ! AN table 8: 9 integrations on 1 of 1 possible baselines. ! AN table 9: 9 integrations on 1 of 1 possible baselines. ! AN table 10: 9 integrations on 21 of 21 possible baselines. ! AN table 11: 9 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.92063 visibilities/baseline/integration-bin. ! Found source: J0629-1959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 11228 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0629-1959_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 54 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 19 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 54 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 19 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 54 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 19 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! A total of 81 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 75 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 54 telescope corrections were flagged in sub-array 7. ! A total of 18 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 19 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=1.426036Jy sigma=8.310079 ! Fit after self-cal, rms=0.255268Jy sigma=1.181124 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.716 mas, bmaj=2.277 mas, bpa=-4.383 degrees ! Estimated noise=1.98833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.736279 Jy ! Component: 100 - total flux cleaned = 0.896912 Jy ! Total flux subtracted in 100 components = 0.896912 Jy ! Clean residual min=-0.019648 max=0.046071 Jy/beam ! Clean residual mean=0.000184 rms=0.004775 Jy/beam ! Combined flux in latest and established models = 0.896912 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.896912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266858Jy sigma=1.230920 ! Fit after self-cal, rms=0.266862Jy sigma=1.230882 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047047 Jy ! Component: 100 - total flux cleaned = 0.0712681 Jy ! Total flux subtracted in 100 components = 0.0712681 Jy ! Clean residual min=-0.017086 max=0.020660 Jy/beam ! Clean residual mean=0.000103 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 0.96818 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.96818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255121Jy sigma=1.147957 ! Fit after self-cal, rms=0.255146Jy sigma=1.147797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=2.638 mas, bpa=-4.703 degrees ! Estimated noise=1.50526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325946 Jy ! Component: 100 - total flux cleaned = 0.0466375 Jy ! Component: 150 - total flux cleaned = 0.0516147 Jy ! Component: 200 - total flux cleaned = 0.0534352 Jy ! Total flux subtracted in 200 components = 0.0534352 Jy ! Clean residual min=-0.019011 max=0.022317 Jy/beam ! Clean residual mean=0.000480 rms=0.004666 Jy/beam ! Combined flux in latest and established models = 1.02162 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 1.02162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248918Jy sigma=1.120902 ! Fit after self-cal, rms=0.248646Jy sigma=1.118878 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7977 x 2.638 at -4.703 degrees (North through East) ! Clean map min=-0.016504 max=0.95858 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 234 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NL 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 HN 1.08 KP 1.00* LA 1.03 ! NL 1.00 PT 1.08 SC 1.17 WF 0.85 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 1.15 KP 1.00* LA 1.05 ! MK 1.03 NL 0.95 OV 0.95 PT 1.01 ! SC 0.98 WF 0.84 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.01 KP 1.00* LA 1.02 MK 1.03 ! NL 0.98 OV 0.96 PT 1.02 ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.02 KP 1.00* LA 1.05 MK 0.96 ! OV 0.97 PT 1.03 ! ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NL 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.02 HN 1.05 KP 1.00* LA 1.00 ! NL 1.01 OV 0.95 PT 0.91 SC 0.99 ! WF 0.84 ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.16 KP 1.00* LA 1.01 ! MK 1.05 NL 0.96 OV 0.94 PT 0.89 ! SC 1.01 WF 0.85 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.03 KP 1.00* LA 1.02 MK 1.04 ! NL 0.97 OV 0.93 PT 0.91 ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.05 KP 1.00* LA 1.03 MK 0.99 ! OV 0.95 PT 0.95 ! ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NL 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.08 KP 1.00* LA 1.07 ! NL 1.11 PT 0.99 SC 1.16 WF 0.84 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 HN 1.09 KP 1.00* LA 1.09 ! NL 1.02 OV 1.03 PT 0.93 SC 0.96 ! WF 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.02 KP 1.00* LA 1.10 MK 1.01 ! NL 1.01 OV 1.00 PT 0.91 ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.05 KP 1.00* LA 1.10 MK 0.99 ! OV 1.02 PT 0.93 ! ! ! Correcting IF 4. ! A total of 234 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NL 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 HN 1.06 KP 1.00* LA 1.06 ! NL 1.04 OV 1.01 PT 0.94 SC 0.99 ! WF 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.06 KP 1.00* LA 1.10 MK 1.05 ! NL 1.07 OV 0.98 PT 0.91 ! ! Telescope amplitude corrections in sub-array 11: ! FD 1.06 KP 1.00* LA 1.09 MK 1.02 ! OV 0.96 PT 0.91 ! ! ! Fit before self-cal, rms=0.248646Jy sigma=1.118878 ! Fit after self-cal, rms=0.180550Jy sigma=0.871139 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.559 mas, bpa=-5.563 degrees ! Estimated noise=1.56327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00501083 Jy ! Component: 100 - total flux cleaned = -0.00474021 Jy ! Component: 150 - total flux cleaned = -0.00451542 Jy ! Component: 200 - total flux cleaned = -0.00410821 Jy ! Total flux subtracted in 200 components = -0.00410821 Jy ! Clean residual min=-0.010089 max=0.009545 Jy/beam ! Clean residual mean=0.000311 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 1.01751 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 1.01751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179710Jy sigma=0.866523 ! Fit after self-cal, rms=0.179678Jy sigma=0.866258 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179678Jy sigma=0.866258 ! Fit after self-cal, rms=0.173941Jy sigma=0.835194 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8988 mas, bmaj=2.56 mas, bpa=-5.56 degrees ! Estimated noise=1.55726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00227137 Jy ! Component: 100 - total flux cleaned = -0.00266602 Jy ! Component: 150 - total flux cleaned = -0.0030074 Jy ! Component: 200 - total flux cleaned = -0.0031556 Jy ! Total flux subtracted in 200 components = -0.0031556 Jy ! Clean residual min=-0.007352 max=0.008406 Jy/beam ! Clean residual mean=0.000305 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 1.01435 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 1.01435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173466Jy sigma=0.832662 ! Fit after self-cal, rms=0.173481Jy sigma=0.832527 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.8, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060807 Jy ! Component: 100 - total flux cleaned = 0.00826522 Jy ! Component: 150 - total flux cleaned = 0.00889859 Jy ! Component: 200 - total flux cleaned = 0.00890466 Jy ! Total flux subtracted in 200 components = 0.00890466 Jy ! Clean residual min=-0.007810 max=0.008308 Jy/beam ! Clean residual mean=0.000213 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 1.02326 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 1.02326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172871Jy sigma=0.830506 ! Fit after self-cal, rms=0.172857Jy sigma=0.830310 ! Inverting map ! Added new window around map position (7.2, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540154 Jy ! Component: 100 - total flux cleaned = 0.00691815 Jy ! Component: 150 - total flux cleaned = 0.00754911 Jy ! Component: 200 - total flux cleaned = 0.00798144 Jy ! Total flux subtracted in 200 components = 0.00798144 Jy ! Clean residual min=-0.007253 max=0.007255 Jy/beam ! Clean residual mean=0.000134 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 1.03124 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 1.03124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172267Jy sigma=0.827889 ! Fit after self-cal, rms=0.172229Jy sigma=0.827686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172229Jy sigma=0.827686 ! Fit after self-cal, rms=0.170825Jy sigma=0.815220 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8992 mas, bmaj=2.562 mas, bpa=-5.569 degrees ! Estimated noise=1.55718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176808 Jy ! Component: 100 - total flux cleaned = 0.00177188 Jy ! Component: 150 - total flux cleaned = 0.00190386 Jy ! Component: 200 - total flux cleaned = 0.00177135 Jy ! Total flux subtracted in 200 components = 0.00177135 Jy ! Clean residual min=-0.006389 max=0.007036 Jy/beam ! Clean residual mean=0.000209 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 1.03301 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 122 components and 1.03301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170499Jy sigma=0.814033 ! Fit after self-cal, rms=0.170498Jy sigma=0.813980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35.2, 23.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043545 Jy ! Component: 100 - total flux cleaned = 0.00505559 Jy ! Component: 150 - total flux cleaned = 0.00543917 Jy ! Component: 200 - total flux cleaned = 0.00555844 Jy ! Total flux subtracted in 200 components = 0.00555844 Jy ! Clean residual min=-0.006264 max=0.006612 Jy/beam ! Clean residual mean=0.000170 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 1.03857 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 1.03857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170163Jy sigma=0.812278 ! Fit after self-cal, rms=0.170153Jy sigma=0.812167 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170153Jy sigma=0.812167 ! Fit after self-cal, rms=0.170184Jy sigma=0.811926 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.939 mas, bpa=-6.484 degrees ! Estimated noise=1.96717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426205 Jy ! Component: 100 - total flux cleaned = -0.000433293 Jy ! Component: 150 - total flux cleaned = -0.000448609 Jy ! Component: 200 - total flux cleaned = -0.000587557 Jy ! Total flux subtracted in 200 components = -0.000587557 Jy ! Clean residual min=-0.007889 max=0.007911 Jy/beam ! Clean residual mean=0.000459 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 1.03798 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 150 components and 1.03798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169954Jy sigma=0.811465 ! Fit after self-cal, rms=0.169953Jy sigma=0.811393 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85983e-06 Jy ! Component: 100 - total flux cleaned = -1.16713e-05 Jy ! Component: 150 - total flux cleaned = -1.111e-05 Jy ! Component: 200 - total flux cleaned = -1.15498e-05 Jy ! Total flux subtracted in 200 components = -1.15498e-05 Jy ! Clean residual min=-0.007853 max=0.008019 Jy/beam ! Clean residual mean=0.000460 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 1.03797 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 160 components and 1.03797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169834Jy sigma=0.811383 ! Fit after self-cal, rms=0.169832Jy sigma=0.811357 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8993 mas, bmaj=2.562 mas, bpa=-5.565 degrees ! Estimated noise=1.55652 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8993 x 2.562 at -5.565 degrees (North through East) ! Clean map min=-0.0068197 max=0.93672 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169832Jy sigma=0.811357 ! Fit after self-cal, rms=0.162244Jy sigma=0.754619 ! Inverting map and beam ! Estimated beam: bmin=0.9004 mas, bmaj=2.563 mas, bpa=-5.563 degrees ! Estimated noise=1.5571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243933 Jy ! Component: 100 - total flux cleaned = -0.000689698 Jy ! Component: 150 - total flux cleaned = -0.000900604 Jy ! Component: 200 - total flux cleaned = -0.000901171 Jy ! Total flux subtracted in 200 components = -0.000901171 Jy ! Clean residual min=-0.005829 max=0.005997 Jy/beam ! Clean residual mean=0.000190 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 1.03707 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 176 components and 1.03707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162078Jy sigma=0.753862 ! Fit after self-cal, rms=0.162076Jy sigma=0.753836 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227249 Jy ! Component: 100 - total flux cleaned = 0.000131367 Jy ! Component: 150 - total flux cleaned = 0.000224512 Jy ! Component: 200 - total flux cleaned = 0.000137345 Jy ! Total flux subtracted in 200 components = 0.000137345 Jy ! Clean residual min=-0.005731 max=0.005920 Jy/beam ! Clean residual mean=0.000189 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 1.0372 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 184 components and 1.0372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161953Jy sigma=0.753300 ! Fit after self-cal, rms=0.161953Jy sigma=0.753287 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161953Jy sigma=0.753287 ! Fit after self-cal, rms=0.161913Jy sigma=0.753234 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7418 mas, bmaj=2.245 mas, bpa=-4.307 degrees ! Estimated noise=2.04897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.727198 Jy ! Component: 100 - total flux cleaned = 0.885938 Jy ! Component: 150 - total flux cleaned = 0.930323 Jy ! Component: 200 - total flux cleaned = 0.955685 Jy ! Total flux subtracted in 200 components = 0.955685 Jy ! Clean residual min=-0.009697 max=0.013762 Jy/beam ! Clean residual mean=0.000111 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.955685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.955685 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9004 mas, bmaj=2.563 mas, bpa=-5.562 degrees ! Estimated noise=1.55628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236845 Jy ! Component: 100 - total flux cleaned = 0.038469 Jy ! Component: 150 - total flux cleaned = 0.0496186 Jy ! Component: 200 - total flux cleaned = 0.0580041 Jy ! Total flux subtracted in 200 components = 0.0580041 Jy ! Clean residual min=-0.006175 max=0.007787 Jy/beam ! Clean residual mean=0.000432 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 1.01369 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 1.01369 Jy ! Inverting map ! Added new window around map position (-13.8, 26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663726 Jy ! Component: 100 - total flux cleaned = 0.0109504 Jy ! Component: 150 - total flux cleaned = 0.0143044 Jy ! Component: 200 - total flux cleaned = 0.0162673 Jy ! Total flux subtracted in 200 components = 0.0162673 Jy ! Clean residual min=-0.006461 max=0.006666 Jy/beam ! Clean residual mean=0.000273 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 1.02996 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 76 components and 1.02996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.94 mas, bpa=-6.497 degrees ! Estimated noise=1.9655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534901 Jy ! Component: 100 - total flux cleaned = 0.0070032 Jy ! Component: 150 - total flux cleaned = 0.00805383 Jy ! Component: 200 - total flux cleaned = 0.00842457 Jy ! Total flux subtracted in 200 components = 0.00842457 Jy ! Clean residual min=-0.007436 max=0.007392 Jy/beam ! Clean residual mean=0.000420 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 1.03838 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337326 Jy ! Component: 100 - total flux cleaned = 0.000489151 Jy ! Component: 150 - total flux cleaned = 0.000626461 Jy ! Component: 200 - total flux cleaned = 0.000625005 Jy ! Total flux subtracted in 200 components = 0.000625005 Jy ! Clean residual min=-0.007275 max=0.007708 Jy/beam ! Clean residual mean=0.000401 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 1.03901 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 114 components and 1.03901 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9004 mas, bmaj=2.563 mas, bpa=-5.562 degrees ! Estimated noise=1.55628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242965 Jy ! Component: 100 - total flux cleaned = -0.0021024 Jy ! Component: 150 - total flux cleaned = -0.00165481 Jy ! Component: 200 - total flux cleaned = -0.00123318 Jy ! Total flux subtracted in 200 components = -0.00123318 Jy ! Clean residual min=-0.006361 max=0.005973 Jy/beam ! Clean residual mean=0.000195 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 1.03777 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 134 components and 1.03777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162210Jy sigma=0.755866 ! Fit after self-cal, rms=0.162191Jy sigma=0.755391 wmodel /d2/scr/pima/rv101_uvs/J0629-1959_X_map.mod ! Writing 134 model components to file: /d2/scr/pima/rv101_uvs/J0629-1959_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0629-1959_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0629-1959_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0629-1959_X_map.win ! wwins: Wrote 6 windows to /d2/scr/pima/rv101_uvs/J0629-1959_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268557 Jy ! Component: 100 - total flux cleaned = 0.000467338 Jy ! Component: 150 - total flux cleaned = 0.000972659 Jy ! Component: 200 - total flux cleaned = 0.00126441 Jy ! Component: 250 - total flux cleaned = 0.00183386 Jy ! Component: 300 - total flux cleaned = 0.00229665 Jy ! Component: 350 - total flux cleaned = 0.0027513 Jy ! Component: 400 - total flux cleaned = 0.00292823 Jy ! Component: 450 - total flux cleaned = 0.00292817 Jy ! Component: 500 - total flux cleaned = 0.00327488 Jy ! Component: 550 - total flux cleaned = 0.00327399 Jy ! Component: 600 - total flux cleaned = 0.00335781 Jy ! Component: 650 - total flux cleaned = 0.0034407 Jy ! Component: 700 - total flux cleaned = 0.00352301 Jy ! Component: 750 - total flux cleaned = 0.00368511 Jy ! Component: 800 - total flux cleaned = 0.00368485 Jy ! Component: 850 - total flux cleaned = 0.00368559 Jy ! Component: 900 - total flux cleaned = 0.00376355 Jy ! Component: 950 - total flux cleaned = 0.00391875 Jy ! Component: 1000 - total flux cleaned = 0.00414895 Jy ! Component: 1050 - total flux cleaned = 0.00422438 Jy ! Component: 1100 - total flux cleaned = 0.00437557 Jy ! Component: 1150 - total flux cleaned = 0.00437618 Jy ! Component: 1200 - total flux cleaned = 0.00459929 Jy ! Component: 1250 - total flux cleaned = 0.00482044 Jy ! Component: 1300 - total flux cleaned = 0.00489312 Jy ! Component: 1350 - total flux cleaned = 0.00503788 Jy ! Component: 1400 - total flux cleaned = 0.00525439 Jy ! Component: 1450 - total flux cleaned = 0.00532611 Jy ! Component: 1500 - total flux cleaned = 0.00553867 Jy ! Component: 1550 - total flux cleaned = 0.00567929 Jy ! Component: 1600 - total flux cleaned = 0.00588851 Jy ! Component: 1650 - total flux cleaned = 0.00602706 Jy ! Component: 1700 - total flux cleaned = 0.00616435 Jy ! Component: 1750 - total flux cleaned = 0.00616446 Jy ! Component: 1800 - total flux cleaned = 0.00650371 Jy ! Component: 1850 - total flux cleaned = 0.00643546 Jy ! Component: 1900 - total flux cleaned = 0.00670341 Jy ! Component: 1950 - total flux cleaned = 0.00657018 Jy ! Component: 2000 - total flux cleaned = 0.00663616 Jy ! Component: 2050 - total flux cleaned = 0.00663623 Jy ! Component: 2100 - total flux cleaned = 0.00663618 Jy ! Component: 2150 - total flux cleaned = 0.00689669 Jy ! Component: 2200 - total flux cleaned = 0.00696113 Jy ! Component: 2250 - total flux cleaned = 0.00715372 Jy ! Component: 2300 - total flux cleaned = 0.00702571 Jy ! Component: 2350 - total flux cleaned = 0.00728008 Jy ! Component: 2400 - total flux cleaned = 0.00721675 Jy ! Component: 2450 - total flux cleaned = 0.0072794 Jy ! Component: 2500 - total flux cleaned = 0.00740411 Jy ! Component: 2550 - total flux cleaned = 0.0072178 Jy ! Component: 2600 - total flux cleaned = 0.00727993 Jy ! Component: 2650 - total flux cleaned = 0.00746461 Jy ! Component: 2700 - total flux cleaned = 0.00752581 Jy ! Component: 2750 - total flux cleaned = 0.00752579 Jy ! Component: 2800 - total flux cleaned = 0.00752574 Jy ! Component: 2850 - total flux cleaned = 0.00746555 Jy ! Component: 2900 - total flux cleaned = 0.00740562 Jy ! Component: 2950 - total flux cleaned = 0.00746556 Jy ! Component: 3000 - total flux cleaned = 0.00776274 Jy ! Component: 3050 - total flux cleaned = 0.00782148 Jy ! Component: 3100 - total flux cleaned = 0.00770372 Jy ! Component: 3150 - total flux cleaned = 0.00764522 Jy ! Component: 3200 - total flux cleaned = 0.00782049 Jy ! Component: 3250 - total flux cleaned = 0.00787844 Jy ! Component: 3300 - total flux cleaned = 0.00787861 Jy ! Component: 3350 - total flux cleaned = 0.00787864 Jy ! Component: 3400 - total flux cleaned = 0.00793578 Jy ! Component: 3450 - total flux cleaned = 0.00799259 Jy ! Component: 3500 - total flux cleaned = 0.00782231 Jy ! Component: 3550 - total flux cleaned = 0.00782233 Jy ! Component: 3600 - total flux cleaned = 0.00787814 Jy ! Component: 3650 - total flux cleaned = 0.00799021 Jy ! Component: 3700 - total flux cleaned = 0.00776687 Jy ! Component: 3750 - total flux cleaned = 0.00782227 Jy ! Component: 3800 - total flux cleaned = 0.00765608 Jy ! Component: 3850 - total flux cleaned = 0.00776617 Jy ! Component: 3900 - total flux cleaned = 0.00782091 Jy ! Component: 3950 - total flux cleaned = 0.00782094 Jy ! Component: 4000 - total flux cleaned = 0.00776664 Jy ! Component: 4050 - total flux cleaned = 0.00792885 Jy ! Total flux subtracted in 4096 components = 0.0079288 Jy ! Clean residual min=-0.002872 max=0.003235 Jy/beam ! Clean residual mean=0.000107 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 1.0457 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 467 components and 1.0457 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0629-1959_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9004 x 2.563 at -5.562 degrees (North through East) ! Clean map min=-0.0068922 max=0.93316 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0629-1959_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.933161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000995214 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.319949 0.319949 0.639899 1.2798 2.5596 5.11919 10.2384 20.4768 40.9535 81.907 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.933 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 937.648 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0629-1959_X_uvs.log closed on Sat Nov 29 16:31:00 2014