! Started logfile: /d2/scr/pima/rv101_uvs/J0539+1433_X_uvs.log on Sat Nov 29 16:30:14 2014 obs /d2/scr/pima/rv101_uvs/J0539+1433_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0539+1433_X_uva.fits ! AN table 1: 642 integrations on 3 of 3 possible baselines. ! AN table 2: 211 integrations on 10 of 10 possible baselines. ! AN table 3: 70 integrations on 45 of 45 possible baselines. ! AN table 4: 71 integrations on 15 of 15 possible baselines. ! AN table 5: 72 integrations on 6 of 6 possible baselines. ! AN table 6: 9 integrations on 15 of 15 possible baselines. ! AN table 7: 9 integrations on 1 of 1 possible baselines. ! AN table 8: 14 integrations on 6 of 6 possible baselines. ! AN table 9: 80 integrations on 55 of 55 possible baselines. ! AN table 10: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.516404 visibilities/baseline/integration-bin. ! Found source: J0539+1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 28332 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0539+1433_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 528 telescope corrections were flagged in sub-array 1. ! A total of 332 telescope corrections were flagged in sub-array 2. ! A total of 368 telescope corrections were flagged in sub-array 3. ! A total of 178 telescope corrections were flagged in sub-array 4. ! A total of 70 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 30 telescope corrections were flagged in sub-array 8. ! A total of 632 telescope corrections were flagged in sub-array 9. ! A total of 28 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 528 telescope corrections were flagged in sub-array 1. ! A total of 332 telescope corrections were flagged in sub-array 2. ! A total of 368 telescope corrections were flagged in sub-array 3. ! A total of 178 telescope corrections were flagged in sub-array 4. ! A total of 70 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 30 telescope corrections were flagged in sub-array 8. ! A total of 632 telescope corrections were flagged in sub-array 9. ! A total of 28 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 1926 telescope corrections were flagged in sub-array 1. ! A total of 533 telescope corrections were flagged in sub-array 2. ! A total of 448 telescope corrections were flagged in sub-array 3. ! A total of 255 telescope corrections were flagged in sub-array 4. ! A total of 147 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! A total of 665 telescope corrections were flagged in sub-array 9. ! A total of 28 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 1926 telescope corrections were flagged in sub-array 1. ! A total of 533 telescope corrections were flagged in sub-array 2. ! A total of 448 telescope corrections were flagged in sub-array 3. ! A total of 255 telescope corrections were flagged in sub-array 4. ! A total of 147 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! A total of 665 telescope corrections were flagged in sub-array 9. ! A total of 28 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.118017Jy sigma=7.374801 ! Fit after self-cal, rms=0.601180Jy sigma=4.026916 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6153 mas, bmaj=1.402 mas, bpa=-9.1 degrees ! Estimated noise=1.28381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318762 Jy ! Component: 100 - total flux cleaned = 0.389579 Jy ! Total flux subtracted in 100 components = 0.389579 Jy ! Clean residual min=-0.011445 max=0.024378 Jy/beam ! Clean residual mean=0.000074 rms=0.002658 Jy/beam ! Combined flux in latest and established models = 0.389579 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.389579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257124Jy sigma=1.459534 ! Fit after self-cal, rms=0.257124Jy sigma=1.459409 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261404 Jy ! Component: 100 - total flux cleaned = 0.0410262 Jy ! Total flux subtracted in 100 components = 0.0410262 Jy ! Clean residual min=-0.011609 max=0.013863 Jy/beam ! Clean residual mean=0.000042 rms=0.002397 Jy/beam ! Combined flux in latest and established models = 0.430605 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.430605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250577Jy sigma=1.422805 ! Fit after self-cal, rms=0.250511Jy sigma=1.422547 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6829 mas, bmaj=1.494 mas, bpa=-8.902 degrees ! Estimated noise=0.854435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306745 Jy ! Component: 100 - total flux cleaned = 0.0387358 Jy ! Component: 150 - total flux cleaned = 0.0425209 Jy ! Component: 200 - total flux cleaned = 0.0450506 Jy ! Total flux subtracted in 200 components = 0.0450506 Jy ! Clean residual min=-0.019482 max=0.015740 Jy/beam ! Clean residual mean=0.000027 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.475656 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.475656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245189Jy sigma=1.406697 ! Fit after self-cal, rms=0.245069Jy sigma=1.406386 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6829 x 1.494 at -8.902 degrees (North through East) ! Clean map min=-0.019204 max=0.44249 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 1398 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.00 NL 1.07 NY 1.06 SC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! FD 1.09 HN 1.13 KP 1.00* LA 1.09 ! MK 1.13 NL 1.06 NY 1.07 OV 1.03 ! PT 1.04 SC 1.05 WF 0.88 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.12 HN 1.10 KP 1.00* LA 1.07 ! MK 1.17 NL 1.03 OV 1.05 PT 1.06 ! SC 1.13 WF 0.91 ! ! ! Correcting IF 2. ! A total of 1398 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.11 HN 1.03 LA 1.10 MA 1.03 ! NL 1.03 NY 1.00 ON 0.86 PT 1.00 ! SC 1.17 WF 0.87 ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.11 MA 1.07 NL 1.06 NY 0.99 ! ON 0.86 WF 0.86 ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.17 KP 1.00* LA 1.05 OV 1.04 ! PT 0.94 WF 0.87 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.00* NL 1.00* NY 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! FD 1.07 HN 1.15 KP 1.00* LA 1.05 ! MK 1.11 NL 1.06 NY 1.04 OV 0.98 ! PT 0.96 SC 1.10 WF 0.92 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.11 HN 1.11 KP 1.00* LA 1.09 ! MK 1.19 NL 1.05 OV 1.04 PT 0.97 ! SC 1.14 WF 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 306 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! A total of 69 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 HN 1.08 LA 1.17 MA 1.11 ! NL 1.00 NY 1.00* ON 1.09 PT 0.97 ! SC 1.16 WF 0.86 ! ! A total of 96 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 141 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 KP 1.00* LA 1.12 OV 1.12 ! PT 0.92 WF 1.13 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WF 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.08 HN 1.14 KP 1.00* LA 1.10 ! MK 1.13 NL 1.07 NY 1.00* OV 1.10 ! PT 0.95 SC 1.00 WF 0.94 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.09 HN 1.13 KP 1.00* LA 1.18 ! MK 1.11 NL 1.07 OV 1.13 PT 0.98 ! SC 1.12 WF 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 306 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! WF 1.00* ! ! A total of 69 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.16 HN 1.07 LA 1.11 MA 1.08 ! NL 1.10 NY 1.00* ON 1.14 PT 1.00 ! SC 1.12 WF 0.87 ! ! A total of 96 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.12 MA 1.14 NL 1.12 NY 1.00* ! ON 0.99 WF 0.93 ! ! A total of 141 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.19 KP 1.00* LA 1.00 OV 1.12 ! PT 1.06 WF 0.96 ! ! Telescope amplitude corrections in sub-array 7: ! SC 0.00* WF 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.12 HN 1.16 KP 1.00* LA 1.08 ! MK 1.14 NL 1.10 NY 1.00* OV 1.06 ! PT 0.98 SC 1.10 WF 1.04 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.17 HN 1.08 KP 1.00* LA 1.12 ! MK 1.16 NL 1.12 OV 1.08 PT 1.01 ! SC 1.16 WF 1.01 ! ! ! Fit before self-cal, rms=0.245069Jy sigma=1.406386 ! Fit after self-cal, rms=0.231622Jy sigma=1.270884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.49 mas, bpa=-7.44 degrees ! Estimated noise=1.04732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774132 Jy ! Component: 100 - total flux cleaned = 0.00737584 Jy ! Component: 150 - total flux cleaned = 0.00675356 Jy ! Component: 200 - total flux cleaned = 0.00543842 Jy ! Total flux subtracted in 200 components = 0.00543842 Jy ! Clean residual min=-0.009725 max=0.011133 Jy/beam ! Clean residual mean=-0.000003 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.481094 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.481094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230157Jy sigma=1.264080 ! Fit after self-cal, rms=0.230024Jy sigma=1.263287 ! Inverting map ! Added new window around map position (17.2, -49.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776751 Jy ! Component: 100 - total flux cleaned = 0.00728822 Jy ! Component: 150 - total flux cleaned = 0.00619849 Jy ! Component: 200 - total flux cleaned = 0.0052491 Jy ! Total flux subtracted in 200 components = 0.0052491 Jy ! Clean residual min=-0.008864 max=0.009419 Jy/beam ! Clean residual mean=0.000013 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.486343 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.486343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229331Jy sigma=1.260147 ! Fit after self-cal, rms=0.229239Jy sigma=1.259798 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229239Jy sigma=1.259798 ! Fit after self-cal, rms=0.218099Jy sigma=1.242010 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6483 mas, bmaj=1.497 mas, bpa=-7.312 degrees ! Estimated noise=1.04554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188845 Jy ! Component: 100 - total flux cleaned = 0.0021441 Jy ! Component: 150 - total flux cleaned = 0.00224577 Jy ! Component: 200 - total flux cleaned = 0.00215737 Jy ! Total flux subtracted in 200 components = 0.00215737 Jy ! Clean residual min=-0.006037 max=0.005363 Jy/beam ! Clean residual mean=0.000009 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.4885 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.488501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217975Jy sigma=1.241318 ! Fit after self-cal, rms=0.217748Jy sigma=1.240706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209259 Jy ! Component: 100 - total flux cleaned = -2.29118e-05 Jy ! Component: 150 - total flux cleaned = -0.000226451 Jy ! Component: 200 - total flux cleaned = -0.000231079 Jy ! Total flux subtracted in 200 components = -0.000231079 Jy ! Clean residual min=-0.006016 max=0.005465 Jy/beam ! Clean residual mean=0.000007 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.488269 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.48827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217699Jy sigma=1.240444 ! Fit after self-cal, rms=0.217696Jy sigma=1.240426 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217696Jy sigma=1.240426 ! Fit after self-cal, rms=0.217623Jy sigma=1.238076 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6479 mas, bmaj=1.498 mas, bpa=-7.314 degrees ! Estimated noise=1.04597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000737056 Jy ! Component: 100 - total flux cleaned = -0.000413191 Jy ! Component: 150 - total flux cleaned = -0.000131336 Jy ! Component: 200 - total flux cleaned = 0.000243276 Jy ! Total flux subtracted in 200 components = 0.000243276 Jy ! Clean residual min=-0.005596 max=0.004986 Jy/beam ! Clean residual mean=0.000000 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.488513 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.488513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217564Jy sigma=1.237756 ! Fit after self-cal, rms=0.217614Jy sigma=1.237621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111134 Jy ! Component: 100 - total flux cleaned = 3.02868e-06 Jy ! Component: 150 - total flux cleaned = 0.000161114 Jy ! Component: 200 - total flux cleaned = 0.000260369 Jy ! Total flux subtracted in 200 components = 0.000260369 Jy ! Clean residual min=-0.005655 max=0.005001 Jy/beam ! Clean residual mean=-0.000001 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.488773 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.488773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217586Jy sigma=1.237479 ! Fit after self-cal, rms=0.217586Jy sigma=1.237474 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217586Jy sigma=1.237474 ! Fit after self-cal, rms=0.217175Jy sigma=1.236617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.065 mas, bmaj=2.501 mas, bpa=32.49 degrees ! Estimated noise=1.55336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186547 Jy ! Component: 100 - total flux cleaned = 0.00273573 Jy ! Component: 150 - total flux cleaned = 0.00333165 Jy ! Component: 200 - total flux cleaned = 0.00392991 Jy ! Total flux subtracted in 200 components = 0.00392991 Jy ! Clean residual min=-0.006096 max=0.005575 Jy/beam ! Clean residual mean=-0.000076 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.492703 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 0.492703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217173Jy sigma=1.236577 ! Fit after self-cal, rms=0.217182Jy sigma=1.236542 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714868 Jy ! Component: 100 - total flux cleaned = 0.000985227 Jy ! Component: 150 - total flux cleaned = 0.00122608 Jy ! Component: 200 - total flux cleaned = 0.00140634 Jy ! Total flux subtracted in 200 components = 0.00140634 Jy ! Clean residual min=-0.006020 max=0.005434 Jy/beam ! Clean residual mean=-0.000091 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.49411 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 0.494109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217187Jy sigma=1.236561 ! Fit after self-cal, rms=0.217188Jy sigma=1.236554 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6473 mas, bmaj=1.498 mas, bpa=-7.325 degrees ! Estimated noise=1.04596 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6473 x 1.498 at -7.325 degrees (North through East) ! Clean map min=-0.007604 max=0.44718 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6026 mas, bmaj=1.409 mas, bpa=-8.635 degrees ! Estimated noise=1.53866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347212 Jy ! Component: 100 - total flux cleaned = 0.425555 Jy ! Component: 150 - total flux cleaned = 0.454228 Jy ! Component: 200 - total flux cleaned = 0.47088 Jy ! Total flux subtracted in 200 components = 0.47088 Jy ! Clean residual min=-0.007349 max=0.009115 Jy/beam ! Clean residual mean=0.000017 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.47088 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.47088 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6473 mas, bmaj=1.498 mas, bpa=-7.325 degrees ! Estimated noise=1.04596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144048 Jy ! Component: 100 - total flux cleaned = 0.0188867 Jy ! Component: 150 - total flux cleaned = 0.0231187 Jy ! Component: 200 - total flux cleaned = 0.0258491 Jy ! Total flux subtracted in 200 components = 0.0258491 Jy ! Clean residual min=-0.006111 max=0.005941 Jy/beam ! Clean residual mean=-0.000029 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.496729 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.496729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.065 mas, bmaj=2.501 mas, bpa=32.49 degrees ! Estimated noise=1.55336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015316 Jy ! Component: 100 - total flux cleaned = 7.61816e-05 Jy ! Component: 150 - total flux cleaned = -0.00119799 Jy ! Component: 200 - total flux cleaned = -0.00142451 Jy ! Total flux subtracted in 200 components = -0.00142451 Jy ! Clean residual min=-0.006535 max=0.006192 Jy/beam ! Clean residual mean=-0.000122 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.495304 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.64809e-05 Jy ! Component: 100 - total flux cleaned = 0.000138834 Jy ! Component: 150 - total flux cleaned = 0.000280371 Jy ! Component: 200 - total flux cleaned = 0.000346936 Jy ! Total flux subtracted in 200 components = 0.000346936 Jy ! Clean residual min=-0.006186 max=0.005594 Jy/beam ! Clean residual mean=-0.000123 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.495651 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.495651 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6473 mas, bmaj=1.498 mas, bpa=-7.325 degrees ! Estimated noise=1.04596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151413 Jy ! Component: 100 - total flux cleaned = -0.00204145 Jy ! Component: 150 - total flux cleaned = -0.00190639 Jy ! Component: 200 - total flux cleaned = -0.00152566 Jy ! Total flux subtracted in 200 components = -0.00152566 Jy ! Clean residual min=-0.005706 max=0.005190 Jy/beam ! Clean residual mean=-0.000029 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.494125 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.494125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217403Jy sigma=1.237752 ! Fit after self-cal, rms=0.217331Jy sigma=1.237389 wmodel /d2/scr/pima/rv101_uvs/J0539+1433_X_map.mod ! Writing 68 model components to file: /d2/scr/pima/rv101_uvs/J0539+1433_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0539+1433_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0539+1433_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0539+1433_X_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J0539+1433_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249586 Jy ! Component: 100 - total flux cleaned = -0.00346835 Jy ! Component: 150 - total flux cleaned = -0.00412133 Jy ! Component: 200 - total flux cleaned = -0.00448177 Jy ! Component: 250 - total flux cleaned = -0.00474303 Jy ! Component: 300 - total flux cleaned = -0.00499786 Jy ! Component: 350 - total flux cleaned = -0.00533148 Jy ! Component: 400 - total flux cleaned = -0.00541481 Jy ! Component: 450 - total flux cleaned = -0.00541661 Jy ! Component: 500 - total flux cleaned = -0.00541734 Jy ! Component: 550 - total flux cleaned = -0.00526483 Jy ! Component: 600 - total flux cleaned = -0.0052651 Jy ! Component: 650 - total flux cleaned = -0.0051896 Jy ! Component: 700 - total flux cleaned = -0.00496915 Jy ! Component: 750 - total flux cleaned = -0.00504218 Jy ! Component: 800 - total flux cleaned = -0.00490019 Jy ! Component: 850 - total flux cleaned = -0.00497152 Jy ! Component: 900 - total flux cleaned = -0.00518117 Jy ! Component: 950 - total flux cleaned = -0.00511184 Jy ! Component: 1000 - total flux cleaned = -0.00518104 Jy ! Component: 1050 - total flux cleaned = -0.0053829 Jy ! Component: 1100 - total flux cleaned = -0.00524886 Jy ! Component: 1150 - total flux cleaned = -0.00518315 Jy ! Component: 1200 - total flux cleaned = -0.00531382 Jy ! Component: 1250 - total flux cleaned = -0.00531374 Jy ! Component: 1300 - total flux cleaned = -0.00537818 Jy ! Component: 1350 - total flux cleaned = -0.0052514 Jy ! Component: 1400 - total flux cleaned = -0.00537779 Jy ! Component: 1450 - total flux cleaned = -0.00543999 Jy ! Component: 1500 - total flux cleaned = -0.00531618 Jy ! Component: 1550 - total flux cleaned = -0.00513246 Jy ! Component: 1600 - total flux cleaned = -0.00519355 Jy ! Component: 1650 - total flux cleaned = -0.00537487 Jy ! Component: 1700 - total flux cleaned = -0.00531468 Jy ! Component: 1750 - total flux cleaned = -0.00519591 Jy ! Component: 1800 - total flux cleaned = -0.0053725 Jy ! Component: 1850 - total flux cleaned = -0.00525481 Jy ! Component: 1900 - total flux cleaned = -0.00554478 Jy ! Component: 1950 - total flux cleaned = -0.00519808 Jy ! Component: 2000 - total flux cleaned = -0.00514103 Jy ! Component: 2050 - total flux cleaned = -0.00531254 Jy ! Component: 2100 - total flux cleaned = -0.0054817 Jy ! Component: 2150 - total flux cleaned = -0.00553749 Jy ! Component: 2200 - total flux cleaned = -0.00553744 Jy ! Component: 2250 - total flux cleaned = -0.00542656 Jy ! Component: 2300 - total flux cleaned = -0.00564693 Jy ! Component: 2350 - total flux cleaned = -0.00553795 Jy ! Component: 2400 - total flux cleaned = -0.00575563 Jy ! Component: 2450 - total flux cleaned = -0.00586341 Jy ! Component: 2500 - total flux cleaned = -0.00586289 Jy ! Component: 2550 - total flux cleaned = -0.00586319 Jy ! Component: 2600 - total flux cleaned = -0.00591646 Jy ! Component: 2650 - total flux cleaned = -0.00628557 Jy ! Component: 2700 - total flux cleaned = -0.00612867 Jy ! Component: 2750 - total flux cleaned = -0.00638903 Jy ! Component: 2800 - total flux cleaned = -0.00628521 Jy ! Component: 2850 - total flux cleaned = -0.00643999 Jy ! Component: 2900 - total flux cleaned = -0.00654259 Jy ! Component: 2950 - total flux cleaned = -0.00654247 Jy ! Component: 3000 - total flux cleaned = -0.0066946 Jy ! Component: 3050 - total flux cleaned = -0.00689617 Jy ! Component: 3100 - total flux cleaned = -0.0067459 Jy ! Component: 3150 - total flux cleaned = -0.00674596 Jy ! Component: 3200 - total flux cleaned = -0.00694413 Jy ! Component: 3250 - total flux cleaned = -0.00684549 Jy ! Component: 3300 - total flux cleaned = -0.00699256 Jy ! Component: 3350 - total flux cleaned = -0.0068951 Jy ! Component: 3400 - total flux cleaned = -0.00694373 Jy ! Component: 3450 - total flux cleaned = -0.00694378 Jy ! Component: 3500 - total flux cleaned = -0.00694373 Jy ! Component: 3550 - total flux cleaned = -0.0068004 Jy ! Component: 3600 - total flux cleaned = -0.0068476 Jy ! Component: 3650 - total flux cleaned = -0.00694215 Jy ! Component: 3700 - total flux cleaned = -0.00670679 Jy ! Component: 3750 - total flux cleaned = -0.00680046 Jy ! Component: 3800 - total flux cleaned = -0.00680061 Jy ! Component: 3850 - total flux cleaned = -0.00675403 Jy ! Component: 3900 - total flux cleaned = -0.0068468 Jy ! Component: 3950 - total flux cleaned = -0.00680065 Jy ! Component: 4000 - total flux cleaned = -0.00670865 Jy ! Component: 4050 - total flux cleaned = -0.00666301 Jy ! Total flux subtracted in 4096 components = -0.00661764 Jy ! Clean residual min=-0.003075 max=0.002835 Jy/beam ! Clean residual mean=-0.000031 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.487508 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 426 components and 0.487508 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0539+1433_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6473 x 1.498 at -7.325 degrees (North through East) ! Clean map min=-0.0063823 max=0.44899 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0539+1433_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.448988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000780639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.521599 0.521599 1.0432 2.0864 4.17279 8.34558 16.6912 33.3823 66.7647 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.448 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 575.154 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0539+1433_X_uvs.log closed on Sat Nov 29 16:30:20 2014