! Started logfile: /d2/scr/pima/rv101_uvs/J0538-4405_X_uvs.log on Sat Nov 29 16:30:06 2014
obs /d2/scr/pima/rv101_uvs/J0538-4405_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0538-4405_X_uva.fits
! AN table 1: 27 integrations on 10 of 10 possible baselines.
! AN table 2: 9 integrations on 15 of 15 possible baselines.
! AN table 3: 18 integrations on 21 of 21 possible baselines.
! AN table 4: 27 integrations on 15 of 15 possible baselines.
! AN table 5: 17 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.967635 visibilities/baseline/integration-bin.
! Found source: J0538-4405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4664 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0538-4405_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 52 telescope corrections were flagged in sub-array 4.
!  A total of 34 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 52 telescope corrections were flagged in sub-array 4.
!  A total of 34 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 52 telescope corrections were flagged in sub-array 4.
!  A total of 34 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 42 telescope corrections were flagged in sub-array 3.
!  A total of 52 telescope corrections were flagged in sub-array 4.
!  A total of 34 telescope corrections were flagged in sub-array 5.
! 
! Fit before self-cal, rms=3.567911Jy  sigma=13.521881
! Fit after  self-cal, rms=2.476855Jy  sigma=9.010700
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5888 mas, bmaj=2.119 mas, bpa=-3.509 degrees
! Estimated noise=4.96431 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.01948 Jy
! Component: 100  -  total flux cleaned = 2.62018 Jy
! Total flux subtracted in 100 components = 2.62018 Jy
! Clean residual min=-0.185331 max=0.356126 Jy/beam
! Clean residual mean=-0.001833 rms=0.040872 Jy/beam
! Combined flux in latest and established models = 2.62018 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 2.62018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.208296Jy  sigma=4.285253
! Fit after  self-cal, rms=1.206793Jy  sigma=4.283784
! Inverting map 
! Added new window around map position (0.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.410735 Jy
! Component: 100  -  total flux cleaned = 0.708113 Jy
! Total flux subtracted in 100 components = 0.708113 Jy
! Clean residual min=-0.099013 max=0.179289 Jy/beam
! Clean residual mean=-0.000892 rms=0.025530 Jy/beam
! Combined flux in latest and established models = 3.3283 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 3.3283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.750046Jy  sigma=2.687122
! Fit after  self-cal, rms=0.745978Jy  sigma=2.672890
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.229804 Jy
! Component: 100  -  total flux cleaned = 0.402972 Jy
! Total flux subtracted in 100 components = 0.402972 Jy
! Clean residual min=-0.067113 max=0.107326 Jy/beam
! Clean residual mean=-0.000358 rms=0.017397 Jy/beam
! Combined flux in latest and established models = 3.73127 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 3.73127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.508819Jy  sigma=1.855722
! Fit after  self-cal, rms=0.507555Jy  sigma=1.849675
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134184 Jy
! Component: 100  -  total flux cleaned = 0.235759 Jy
! Total flux subtracted in 100 components = 0.235759 Jy
! Clean residual min=-0.053636 max=0.068474 Jy/beam
! Clean residual mean=-0.000044 rms=0.013417 Jy/beam
! Combined flux in latest and established models = 3.96703 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 3.96703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.390127Jy  sigma=1.452560
! Fit after  self-cal, rms=0.389590Jy  sigma=1.450195
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7086 mas, bmaj=2.499 mas, bpa=-3.812 degrees
! Estimated noise=4.08949 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16476 Jy
! Component: 100  -  total flux cleaned = 0.256423 Jy
! Component: 150  -  total flux cleaned = 0.308565 Jy
! Component: 200  -  total flux cleaned = 0.338375 Jy
! Total flux subtracted in 200 components = 0.338375 Jy
! Clean residual min=-0.070597 max=0.053343 Jy/beam
! Clean residual mean=0.001236 rms=0.015329 Jy/beam
! Combined flux in latest and established models = 4.3054 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 57 components and 4.3054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.295553Jy  sigma=1.145644
! Fit after  self-cal, rms=0.294789Jy  sigma=1.141624
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7086 x 2.499 at -3.812 degrees (North through East)
! Clean map  min=-0.068829  max=2.9884 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.00*    LA        1.03     PT        0.99     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.03     OV        0.96     
!   PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.98     KP        1.00*    LA        1.04     MK        1.00     
!   OV        1.02     PT        1.00     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.99     KP        1.00*    LA        1.07     MK        1.00     
!   OV        0.98     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.00*    MK        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.00*    LA        0.97     PT        0.90     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        0.99     OV        0.95     
!   PT        0.91     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     KP        1.00*    LA        1.04     MK        1.00     
!   OV        0.99     PT        0.91     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.01     KP        1.00*    LA        1.02     MK        1.02     
!   OV        0.97     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.00*    MK        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.00*    LA        1.05     PT        0.89     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.05     OV        1.03     
!   PT        0.91     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.00     KP        1.00*    LA        1.10     MK        0.96     
!   OV        1.06     PT        0.92     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.99     KP        1.00*    LA        1.09     MK        0.98     
!   OV        1.04     PT        0.91     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.00*    MK        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.00*    LA        1.03     PT        0.91     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.05     OV        0.99     
!   PT        0.91     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.02     KP        1.00*    LA        1.09     MK        1.00     
!   OV        1.05     PT        0.92     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        1.02     KP        1.00*    LA        1.06     MK        1.02     
!   OV        1.02     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.00*    MK        0.00*    
! 
! 
! Fit before self-cal, rms=0.294789Jy  sigma=1.141624
! Fit after  self-cal, rms=0.193632Jy  sigma=0.691612
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7094 mas, bmaj=2.505 mas, bpa=-3.859 degrees
! Estimated noise=4.07448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00201033 Jy
! Component: 100  -  total flux cleaned = -0.00273686 Jy
! Component: 150  -  total flux cleaned = -0.00330747 Jy
! Component: 200  -  total flux cleaned = -0.00330776 Jy
! Total flux subtracted in 200 components = -0.00330776 Jy
! Clean residual min=-0.026722 max=0.024870 Jy/beam
! Clean residual mean=0.000969 rms=0.006330 Jy/beam
! Combined flux in latest and established models = 4.30209 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 4.30209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193124Jy  sigma=0.689865
! Fit after  self-cal, rms=0.193070Jy  sigma=0.689574
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193070Jy  sigma=0.689574
! Fit after  self-cal, rms=0.191769Jy  sigma=0.686916
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7094 mas, bmaj=2.505 mas, bpa=-3.856 degrees
! Estimated noise=4.0684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00277679 Jy
! Component: 100  -  total flux cleaned = -0.00324246 Jy
! Component: 150  -  total flux cleaned = -0.00360705 Jy
! Component: 200  -  total flux cleaned = -0.0037559 Jy
! Total flux subtracted in 200 components = -0.0037559 Jy
! Clean residual min=-0.025367 max=0.023974 Jy/beam
! Clean residual mean=0.000952 rms=0.006216 Jy/beam
! Combined flux in latest and established models = 4.29834 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 68 components and 4.29834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191293Jy  sigma=0.685337
! Fit after  self-cal, rms=0.191258Jy  sigma=0.685135
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106858 Jy
! Component: 100  -  total flux cleaned = 0.00106232 Jy
! Component: 150  -  total flux cleaned = 0.00105835 Jy
! Component: 200  -  total flux cleaned = 0.00106388 Jy
! Total flux subtracted in 200 components = 0.00106388 Jy
! Clean residual min=-0.025104 max=0.023849 Jy/beam
! Clean residual mean=0.000953 rms=0.006192 Jy/beam
! Combined flux in latest and established models = 4.2994 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 4.2994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191039Jy  sigma=0.684367
! Fit after  self-cal, rms=0.191029Jy  sigma=0.684273
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191029Jy  sigma=0.684273
! Fit after  self-cal, rms=0.159472Jy  sigma=0.588527
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7095 mas, bmaj=2.497 mas, bpa=-3.829 degrees
! Estimated noise=4.06621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300706 Jy
! Component: 100  -  total flux cleaned = 0.00325865 Jy
! Component: 150  -  total flux cleaned = 0.00325295 Jy
! Component: 200  -  total flux cleaned = 0.00333702 Jy
! Total flux subtracted in 200 components = 0.00333702 Jy
! Clean residual min=-0.012379 max=0.015251 Jy/beam
! Clean residual mean=0.000029 rms=0.002890 Jy/beam
! Combined flux in latest and established models = 4.30274 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 74 components and 4.30274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159217Jy  sigma=0.587807
! Fit after  self-cal, rms=0.159271Jy  sigma=0.587630
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121092 Jy
! Component: 100  -  total flux cleaned = 0.012388 Jy
! Component: 150  -  total flux cleaned = 0.0121684 Jy
! Component: 200  -  total flux cleaned = 0.0121738 Jy
! Total flux subtracted in 200 components = 0.0121738 Jy
! Clean residual min=-0.011677 max=0.009915 Jy/beam
! Clean residual mean=0.000044 rms=0.002733 Jy/beam
! Combined flux in latest and established models = 4.31491 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 89 components and 4.31491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157933Jy  sigma=0.583478
! Fit after  self-cal, rms=0.157589Jy  sigma=0.582998
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157589Jy  sigma=0.582998
! Fit after  self-cal, rms=0.157002Jy  sigma=0.581840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.575 mas, bmaj=9.667 mas, bpa=2.494 degrees
! Estimated noise=6.56439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744421 Jy
! Component: 100  -  total flux cleaned = 0.0080884 Jy
! Component: 150  -  total flux cleaned = 0.00808808 Jy
! Component: 200  -  total flux cleaned = 0.00809288 Jy
! Total flux subtracted in 200 components = 0.00809288 Jy
! Clean residual min=-0.014082 max=0.011405 Jy/beam
! Clean residual mean=-0.000047 rms=0.004325 Jy/beam
! Combined flux in latest and established models = 4.32301 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 101 components and 4.32301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156731Jy  sigma=0.581345
! Fit after  self-cal, rms=0.156663Jy  sigma=0.581084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338189 Jy
! Component: 100  -  total flux cleaned = 0.000337588 Jy
! Component: 150  -  total flux cleaned = 0.000342863 Jy
! Component: 200  -  total flux cleaned = 0.000357483 Jy
! Total flux subtracted in 200 components = 0.000357483 Jy
! Clean residual min=-0.013618 max=0.011652 Jy/beam
! Clean residual mean=-0.000046 rms=0.004299 Jy/beam
! Combined flux in latest and established models = 4.32337 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 103 components and 4.32337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156602Jy  sigma=0.580990
! Fit after  self-cal, rms=0.156588Jy  sigma=0.580845
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7092 mas, bmaj=2.495 mas, bpa=-3.837 degrees
! Estimated noise=4.06455 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7092 x 2.495 at -3.837 degrees (North through East)
! Clean map  min=-0.0096267  max=2.9668 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156588Jy  sigma=0.580845
! Fit after  self-cal, rms=0.125285Jy  sigma=0.402400
! Inverting map and beam 
! Estimated beam: bmin=0.709 mas, bmaj=2.494 mas, bpa=-3.841 degrees
! Estimated noise=4.06563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467455 Jy
! Component: 100  -  total flux cleaned = 0.0050339 Jy
! Component: 150  -  total flux cleaned = 0.00502755 Jy
! Component: 200  -  total flux cleaned = 0.00490016 Jy
! Total flux subtracted in 200 components = 0.00490016 Jy
! Clean residual min=-0.010185 max=0.009027 Jy/beam
! Clean residual mean=-0.000046 rms=0.002459 Jy/beam
! Combined flux in latest and established models = 4.32827 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 4.32827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124724Jy  sigma=0.400396
! Fit after  self-cal, rms=0.124543Jy  sigma=0.400098
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011984 Jy
! Component: 100  -  total flux cleaned = 0.00143318 Jy
! Component: 150  -  total flux cleaned = 0.00143044 Jy
! Component: 200  -  total flux cleaned = 0.00152576 Jy
! Total flux subtracted in 200 components = 0.00152576 Jy
! Clean residual min=-0.010095 max=0.008886 Jy/beam
! Clean residual mean=-0.000045 rms=0.002434 Jy/beam
! Combined flux in latest and established models = 4.32979 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 121 components and 4.32979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124313Jy  sigma=0.399277
! Fit after  self-cal, rms=0.124247Jy  sigma=0.399175
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124247Jy  sigma=0.399175
! Fit after  self-cal, rms=0.124004Jy  sigma=0.398529
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5884 mas, bmaj=2.116 mas, bpa=-3.443 degrees
! Estimated noise=4.93857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.00787 Jy
! Component: 100  -  total flux cleaned = 2.61878 Jy
! Component: 150  -  total flux cleaned = 3.02436 Jy
! Component: 200  -  total flux cleaned = 3.32667 Jy
! Total flux subtracted in 200 components = 3.32667 Jy
! Clean residual min=-0.096400 max=0.175889 Jy/beam
! Clean residual mean=-0.001238 rms=0.022354 Jy/beam
! Combined flux in latest and established models = 3.32667 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 3.32667 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.709 mas, bmaj=2.493 mas, bpa=-3.837 degrees
! Estimated noise=4.06622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.438785 Jy
! Component: 100  -  total flux cleaned = 0.678232 Jy
! Component: 150  -  total flux cleaned = 0.810899 Jy
! Component: 200  -  total flux cleaned = 0.885487 Jy
! Total flux subtracted in 200 components = 0.885487 Jy
! Clean residual min=-0.019201 max=0.042635 Jy/beam
! Clean residual mean=-0.000204 rms=0.006853 Jy/beam
! Combined flux in latest and established models = 4.21216 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 58 components and 4.21216 Jy
! Inverting map 
! Added new window around map position (-0.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0455977 Jy
! Component: 100  -  total flux cleaned = 0.0743769 Jy
! Component: 150  -  total flux cleaned = 0.0937658 Jy
! Component: 200  -  total flux cleaned = 0.106965 Jy
! Total flux subtracted in 200 components = 0.106965 Jy
! Clean residual min=-0.010298 max=0.010809 Jy/beam
! Clean residual mean=-0.000091 rms=0.002504 Jy/beam
! Combined flux in latest and established models = 4.31912 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 81 components and 4.31912 Jy
! Inverting map 
! Added new window around map position (1.8, 8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00812653 Jy
! Component: 100  -  total flux cleaned = 0.0101685 Jy
! Component: 150  -  total flux cleaned = 0.0121138 Jy
! Component: 200  -  total flux cleaned = 0.0131577 Jy
! Total flux subtracted in 200 components = 0.0131577 Jy
! Clean residual min=-0.009845 max=0.008856 Jy/beam
! Clean residual mean=-0.000080 rms=0.002339 Jy/beam
! Combined flux in latest and established models = 4.33228 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 95 components and 4.33228 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.573 mas, bmaj=9.656 mas, bpa=2.492 degrees
! Estimated noise=6.57079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103622 Jy
! Component: 100  -  total flux cleaned = 0.00102743 Jy
! Component: 150  -  total flux cleaned = 0.000876834 Jy
! Component: 200  -  total flux cleaned = 0.000601865 Jy
! Total flux subtracted in 200 components = 0.000601865 Jy
! Clean residual min=-0.011604 max=0.010345 Jy/beam
! Clean residual mean=-0.000197 rms=0.003863 Jy/beam
! Combined flux in latest and established models = 4.33288 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119664 Jy
! Component: 100  -  total flux cleaned = -0.000231889 Jy
! Component: 150  -  total flux cleaned = -0.000437672 Jy
! Component: 200  -  total flux cleaned = -0.000526355 Jy
! Total flux subtracted in 200 components = -0.000526355 Jy
! Clean residual min=-0.011526 max=0.010247 Jy/beam
! Clean residual mean=-0.000198 rms=0.003744 Jy/beam
! Combined flux in latest and established models = 4.33236 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 112 components and 4.33236 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.709 mas, bmaj=2.493 mas, bpa=-3.837 degrees
! Estimated noise=4.06622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000496181 Jy
! Component: 100  -  total flux cleaned = 0.000325762 Jy
! Component: 150  -  total flux cleaned = 2.07475e-05 Jy
! Component: 200  -  total flux cleaned = 2.38269e-05 Jy
! Total flux subtracted in 200 components = 2.38269e-05 Jy
! Clean residual min=-0.009199 max=0.008189 Jy/beam
! Clean residual mean=-0.000078 rms=0.002215 Jy/beam
! Combined flux in latest and established models = 4.33238 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 126 components and 4.33238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123031Jy  sigma=0.395730
! Fit after  self-cal, rms=0.122929Jy  sigma=0.395038
wmodel /d2/scr/pima/rv101_uvs/J0538-4405_X_map.mod
! Writing 126 model components to file: /d2/scr/pima/rv101_uvs/J0538-4405_X_map.mod
wobs /d2/scr/pima/rv101_uvs/J0538-4405_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0538-4405_X_uvs.fits
wwins /d2/scr/pima/rv101_uvs/J0538-4405_X_map.win
! wwins: Wrote 5 windows to /d2/scr/pima/rv101_uvs/J0538-4405_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0041524 Jy
! Component: 100  -  total flux cleaned = -0.00688267 Jy
! Component: 150  -  total flux cleaned = -0.0085872 Jy
! Component: 200  -  total flux cleaned = -0.0096654 Jy
! Component: 250  -  total flux cleaned = -0.0106997 Jy
! Component: 300  -  total flux cleaned = -0.0118181 Jy
! Component: 350  -  total flux cleaned = -0.0124183 Jy
! Component: 400  -  total flux cleaned = -0.0131181 Jy
! Component: 450  -  total flux cleaned = -0.0137988 Jy
! Component: 500  -  total flux cleaned = -0.0146796 Jy
! Component: 550  -  total flux cleaned = -0.0151092 Jy
! Component: 600  -  total flux cleaned = -0.0159489 Jy
! Component: 650  -  total flux cleaned = -0.0165629 Jy
! Component: 700  -  total flux cleaned = -0.0171629 Jy
! Component: 750  -  total flux cleaned = -0.0180403 Jy
! Component: 800  -  total flux cleaned = -0.0186102 Jy
! Component: 850  -  total flux cleaned = -0.0191691 Jy
! Component: 900  -  total flux cleaned = -0.0195364 Jy
! Component: 950  -  total flux cleaned = -0.0204318 Jy
! Component: 1000  -  total flux cleaned = -0.0206071 Jy
! Component: 1050  -  total flux cleaned = -0.0210385 Jy
! Component: 1100  -  total flux cleaned = -0.0214628 Jy
! Component: 1150  -  total flux cleaned = -0.021631 Jy
! Component: 1200  -  total flux cleaned = -0.0221258 Jy
! Component: 1250  -  total flux cleaned = -0.0224481 Jy
! Component: 1300  -  total flux cleaned = -0.022686 Jy
! Component: 1350  -  total flux cleaned = -0.0229978 Jy
! Component: 1400  -  total flux cleaned = -0.0229201 Jy
! Component: 1450  -  total flux cleaned = -0.0231471 Jy
! Component: 1500  -  total flux cleaned = -0.0229995 Jy
! Component: 1550  -  total flux cleaned = -0.0231489 Jy
! Component: 1600  -  total flux cleaned = -0.0232215 Jy
! Component: 1650  -  total flux cleaned = -0.0230783 Jy
! Component: 1700  -  total flux cleaned = -0.0232927 Jy
! Component: 1750  -  total flux cleaned = -0.0235038 Jy
! Component: 1800  -  total flux cleaned = -0.0233638 Jy
! Component: 1850  -  total flux cleaned = -0.0235014 Jy
! Component: 1900  -  total flux cleaned = -0.02323 Jy
! Component: 1950  -  total flux cleaned = -0.0231625 Jy
! Component: 2000  -  total flux cleaned = -0.0230955 Jy
! Component: 2050  -  total flux cleaned = -0.0230948 Jy
! Component: 2100  -  total flux cleaned = -0.0227705 Jy
! Component: 2150  -  total flux cleaned = -0.0230936 Jy
! Component: 2200  -  total flux cleaned = -0.0232841 Jy
! Component: 2250  -  total flux cleaned = -0.0230328 Jy
! Component: 2300  -  total flux cleaned = -0.0232189 Jy
! Component: 2350  -  total flux cleaned = -0.0229715 Jy
! Component: 2400  -  total flux cleaned = -0.0230325 Jy
! Component: 2450  -  total flux cleaned = -0.0228518 Jy
! Component: 2500  -  total flux cleaned = -0.0228516 Jy
! Component: 2550  -  total flux cleaned = -0.0228517 Jy
! Component: 2600  -  total flux cleaned = -0.022734 Jy
! Component: 2650  -  total flux cleaned = -0.0225604 Jy
! Component: 2700  -  total flux cleaned = -0.0225032 Jy
! Component: 2750  -  total flux cleaned = -0.0223329 Jy
! Component: 2800  -  total flux cleaned = -0.0223327 Jy
! Component: 2850  -  total flux cleaned = -0.022221 Jy
! Component: 2900  -  total flux cleaned = -0.0221655 Jy
! Component: 2950  -  total flux cleaned = -0.0219465 Jy
! Component: 3000  -  total flux cleaned = -0.0219468 Jy
! Component: 3050  -  total flux cleaned = -0.0216244 Jy
! Component: 3100  -  total flux cleaned = -0.0217314 Jy
! Component: 3150  -  total flux cleaned = -0.0216259 Jy
! Component: 3200  -  total flux cleaned = -0.0214685 Jy
! Component: 3250  -  total flux cleaned = -0.0212607 Jy
! Component: 3300  -  total flux cleaned = -0.0213637 Jy
! Component: 3350  -  total flux cleaned = -0.0212604 Jy
! Component: 3400  -  total flux cleaned = -0.021057 Jy
! Component: 3450  -  total flux cleaned = -0.0208554 Jy
! Component: 3500  -  total flux cleaned = -0.0207556 Jy
! Component: 3550  -  total flux cleaned = -0.0207063 Jy
! Component: 3600  -  total flux cleaned = -0.0205587 Jy
! Component: 3650  -  total flux cleaned = -0.0204128 Jy
! Component: 3700  -  total flux cleaned = -0.0204126 Jy
! Component: 3750  -  total flux cleaned = -0.0204129 Jy
! Component: 3800  -  total flux cleaned = -0.0200794 Jy
! Component: 3850  -  total flux cleaned = -0.0200315 Jy
! Component: 3900  -  total flux cleaned = -0.0197501 Jy
! Component: 3950  -  total flux cleaned = -0.0197968 Jy
! Component: 4000  -  total flux cleaned = -0.0197966 Jy
! Component: 4050  -  total flux cleaned = -0.0196132 Jy
! Total flux subtracted in 4096 components = -0.0195677 Jy
! Clean residual min=-0.002638 max=0.002824 Jy/beam
! Clean residual mean=-0.000010 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 4.31281 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 433 components and 4.31282 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/rv101_uvs/J0538-4405_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.709 x 2.493 at -3.837 degrees (North through East)
! Clean map  min=-0.010204  max=2.9848 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0538-4405_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.98478 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00078079 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0784772 0.0784772 0.156954 0.313909 0.627818 1.25564 2.51127 5.02254 10.0451 20.0902 40.1803 80.3607
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.984 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3822.76 
quit
! Quitting program
! Log file /d2/scr/pima/rv101_uvs/J0538-4405_X_uvs.log closed on Sat Nov 29 16:30:11 2014