! Started logfile: /d2/scr/pima/rv101_uvs/J0501-0159_X_uvs.log on Sat Nov 29 16:29:57 2014 obs /d2/scr/pima/rv101_uvs/J0501-0159_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0501-0159_X_uva.fits ! AN table 1: 142 integrations on 1 of 1 possible baselines. ! AN table 2: 203 integrations on 3 of 3 possible baselines. ! AN table 3: 24 integrations on 3 of 3 possible baselines. ! AN table 4: 63 integrations on 6 of 6 possible baselines. ! AN table 5: 35 integrations on 10 of 10 possible baselines. ! AN table 6: 73 integrations on 45 of 45 possible baselines. ! AN table 7: 9 integrations on 36 of 36 possible baselines. ! AN table 8: 9 integrations on 45 of 45 possible baselines. ! AN table 9: 9 integrations on 6 of 6 possible baselines. ! AN table 10: 9 integrations on 3 of 3 possible baselines. ! AN table 11: 9 integrations on 1 of 1 possible baselines. ! AN table 12: 9 integrations on 3 of 3 possible baselines. ! AN table 13: 18 integrations on 21 of 21 possible baselines. ! AN table 14: 9 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.725747 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 17984 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0501-0159_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 284 telescope corrections were flagged in sub-array 1. ! A total of 165 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 78 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! A total of 360 telescope corrections were flagged in sub-array 6. ! A total of 25 telescope corrections were flagged in sub-array 7. ! A total of 19 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 42 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 284 telescope corrections were flagged in sub-array 1. ! A total of 165 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 78 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! A total of 360 telescope corrections were flagged in sub-array 6. ! A total of 25 telescope corrections were flagged in sub-array 7. ! A total of 19 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 42 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 284 telescope corrections were flagged in sub-array 1. ! A total of 609 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 162 telescope corrections were flagged in sub-array 4. ! A total of 69 telescope corrections were flagged in sub-array 5. ! A total of 360 telescope corrections were flagged in sub-array 6. ! A total of 25 telescope corrections were flagged in sub-array 7. ! A total of 19 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 42 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 284 telescope corrections were flagged in sub-array 1. ! A total of 609 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 162 telescope corrections were flagged in sub-array 4. ! A total of 69 telescope corrections were flagged in sub-array 5. ! A total of 360 telescope corrections were flagged in sub-array 6. ! A total of 25 telescope corrections were flagged in sub-array 7. ! A total of 19 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 27 telescope corrections were flagged in sub-array 12. ! A total of 42 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=1.798349Jy sigma=8.467246 ! Fit after self-cal, rms=0.534083Jy sigma=2.198464 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.631 mas, bmaj=1.969 mas, bpa=-8.561 degrees ! Estimated noise=1.91838 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05106 Jy ! Component: 100 - total flux cleaned = 1.28223 Jy ! Total flux subtracted in 100 components = 1.28223 Jy ! Clean residual min=-0.029595 max=0.072610 Jy/beam ! Clean residual mean=0.000364 rms=0.006379 Jy/beam ! Combined flux in latest and established models = 1.28223 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.28223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354313Jy sigma=1.295024 ! Fit after self-cal, rms=0.354308Jy sigma=1.294997 ! Inverting map ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754582 Jy ! Component: 100 - total flux cleaned = 0.110699 Jy ! Total flux subtracted in 100 components = 0.110699 Jy ! Clean residual min=-0.025265 max=0.029742 Jy/beam ! Clean residual mean=0.000284 rms=0.005279 Jy/beam ! Combined flux in latest and established models = 1.39293 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 1.39293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321465Jy sigma=1.151334 ! Fit after self-cal, rms=0.321445Jy sigma=1.151212 ! Inverting map ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6681 mas, bmaj=2.31 mas, bpa=-8.187 degrees ! Estimated noise=1.52818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485309 Jy ! Component: 100 - total flux cleaned = 0.0598518 Jy ! Component: 150 - total flux cleaned = 0.0610058 Jy ! Component: 200 - total flux cleaned = 0.0622947 Jy ! Total flux subtracted in 200 components = 0.0622947 Jy ! Clean residual min=-0.034876 max=0.041962 Jy/beam ! Clean residual mean=0.002428 rms=0.006829 Jy/beam ! Combined flux in latest and established models = 1.45523 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 1.45523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307021Jy sigma=1.141458 ! Fit after self-cal, rms=0.306990Jy sigma=1.141403 ! Inverting map ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (-0.6, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152987 Jy ! Component: 100 - total flux cleaned = 0.0130606 Jy ! Component: 150 - total flux cleaned = 0.0121692 Jy ! Component: 200 - total flux cleaned = 0.0106901 Jy ! Total flux subtracted in 200 components = 0.0106901 Jy ! Clean residual min=-0.031974 max=0.041027 Jy/beam ! Clean residual mean=0.002327 rms=0.006315 Jy/beam ! Combined flux in latest and established models = 1.46592 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 1.46592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294323Jy sigma=1.114577 ! Fit after self-cal, rms=0.293189Jy sigma=1.109557 ! Inverting map ! Your choice of large map pixels excluded 2.01% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6681 x 2.31 at -8.187 degrees (North through East) ! Clean map min=-0.033301 max=1.3817 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 444 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.02 HN 1.05 KP 1.00* LA 1.04 ! MK 1.05 NL 0.98 OV 0.97 PT 1.02 ! SC 1.02 WF 0.84 ! ! Telescope amplitude corrections in sub-array 9: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.05 KP 1.00* LA 1.08 MK 1.01 ! NL 1.09 OV 1.00 PT 1.05 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.15 KP 1.00* LA 1.14 MK 1.07 ! OV 1.02 PT 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 444 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.02 HN 1.07 KP 1.00* LA 0.98 ! MA 1.01 NL 0.99 ON 0.85 PT 0.94 ! SC 1.07 WF 0.84 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.01 HN 1.08 KP 1.00* LA 1.00 ! NL 1.00 OV 0.97 PT 0.94 SC 1.01 ! WF 0.87 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.05 HN 1.07 KP 1.00* LA 0.99 ! MK 1.04 NL 1.00 OV 0.96 PT 0.92 ! SC 1.03 WF 0.87 ! ! Telescope amplitude corrections in sub-array 9: ! HN 1.05 NL 0.99 SC 1.07 WF 0.85 ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.05 KP 1.00* LA 1.04 MK 1.04 ! NL 1.11 OV 0.97 PT 0.95 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.09 KP 1.00* LA 1.13 MK 1.15 ! OV 0.97 PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.08 MA 1.01 NY 1.00* ON 1.03 ! WF 0.84 ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HN 1.08 KP 1.00* LA 1.06 ! MA 1.10 NL 1.03 ON 0.99 PT 0.95 ! SC 1.03 WF 0.86 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.02 HN 1.10 KP 1.00* LA 1.06 ! NL 1.01 OV 1.06 PT 0.95 SC 1.00 ! WF 0.88 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.03 HN 1.07 KP 1.00* LA 1.06 ! MK 1.04 NL 1.03 OV 1.04 PT 0.92 ! SC 1.01 WF 0.88 ! ! Telescope amplitude corrections in sub-array 9: ! HN 1.09 NL 1.04 SC 1.00 WF 0.89 ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.05 KP 1.00* LA 1.08 MK 1.05 ! NL 1.11 OV 1.06 PT 0.93 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* ON 0.00* SC 0.00* ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 54 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.11 MA 1.13 NY 1.00* ON 1.08 ! WF 0.91 ! ! A total of 27 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 HN 1.10 KP 1.00* LA 1.03 ! MA 1.15 NL 1.05 ON 1.06 PT 0.95 ! SC 1.05 WF 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.05 HN 1.11 KP 1.00* LA 1.03 ! NL 1.04 OV 1.01 PT 0.96 SC 1.00 ! WF 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.06 HN 1.08 KP 1.00* LA 1.05 ! MK 1.09 NL 1.04 OV 0.99 PT 0.96 ! SC 1.01 WF 0.98 ! ! Telescope amplitude corrections in sub-array 9: ! HN 1.04 NL 1.04 SC 1.04 WF 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* SC 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.09 KP 1.00* LA 1.11 MK 1.06 ! NL 1.15 OV 1.02 PT 0.97 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.16 KP 1.00* LA 1.17 MK 1.14 ! OV 1.05 PT 1.08 ! ! ! Fit before self-cal, rms=0.293189Jy sigma=1.109557 ! Fit after self-cal, rms=0.244032Jy sigma=0.920344 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6549 mas, bmaj=2.412 mas, bpa=-7.602 degrees ! Estimated noise=1.61272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197705 Jy ! Component: 100 - total flux cleaned = 0.0255082 Jy ! Component: 150 - total flux cleaned = 0.0278836 Jy ! Component: 200 - total flux cleaned = 0.0291065 Jy ! Total flux subtracted in 200 components = 0.0291065 Jy ! Clean residual min=-0.018951 max=0.019725 Jy/beam ! Clean residual mean=0.001808 rms=0.004016 Jy/beam ! Combined flux in latest and established models = 1.49503 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 1.49503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239766Jy sigma=0.910202 ! Fit after self-cal, rms=0.239527Jy sigma=0.909207 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239527Jy sigma=0.909207 ! Fit after self-cal, rms=0.239496Jy sigma=0.903217 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6552 mas, bmaj=2.411 mas, bpa=-7.583 degrees ! Estimated noise=1.61771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788044 Jy ! Component: 100 - total flux cleaned = 0.00833635 Jy ! Component: 150 - total flux cleaned = 0.00832657 Jy ! Component: 200 - total flux cleaned = 0.00863478 Jy ! Total flux subtracted in 200 components = 0.00863478 Jy ! Clean residual min=-0.018056 max=0.018414 Jy/beam ! Clean residual mean=0.001874 rms=0.003873 Jy/beam ! Combined flux in latest and established models = 1.50366 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 1.50366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237364Jy sigma=0.899641 ! Fit after self-cal, rms=0.237310Jy sigma=0.899340 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.8, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179861 Jy ! Component: 100 - total flux cleaned = 0.022626 Jy ! Component: 150 - total flux cleaned = 0.0235959 Jy ! Component: 200 - total flux cleaned = 0.0241943 Jy ! Total flux subtracted in 200 components = 0.0241943 Jy ! Clean residual min=-0.016190 max=0.018054 Jy/beam ! Clean residual mean=0.001639 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 1.52785 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 1.52785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234796Jy sigma=0.893065 ! Fit after self-cal, rms=0.234654Jy sigma=0.892161 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (29.2, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161728 Jy ! Component: 100 - total flux cleaned = 0.0257182 Jy ! Component: 150 - total flux cleaned = 0.0321776 Jy ! Component: 200 - total flux cleaned = 0.0349168 Jy ! Total flux subtracted in 200 components = 0.0349168 Jy ! Clean residual min=-0.015677 max=0.015299 Jy/beam ! Clean residual mean=0.001308 rms=0.003443 Jy/beam ! Combined flux in latest and established models = 1.56277 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 1.56277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232318Jy sigma=0.887565 ! Fit after self-cal, rms=0.232222Jy sigma=0.886859 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232222Jy sigma=0.886859 ! Fit after self-cal, rms=0.218969Jy sigma=0.843680 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6563 mas, bmaj=2.413 mas, bpa=-7.575 degrees ! Estimated noise=1.61852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174909 Jy ! Component: 100 - total flux cleaned = 0.00372503 Jy ! Component: 150 - total flux cleaned = 0.00554037 Jy ! Component: 200 - total flux cleaned = 0.00682302 Jy ! Total flux subtracted in 200 components = 0.00682302 Jy ! Clean residual min=-0.010333 max=0.011530 Jy/beam ! Clean residual mean=0.001245 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 1.56959 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 141 components and 1.56959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218319Jy sigma=0.840842 ! Fit after self-cal, rms=0.218259Jy sigma=0.840691 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852788 Jy ! Component: 100 - total flux cleaned = 0.0116772 Jy ! Component: 150 - total flux cleaned = 0.0130385 Jy ! Component: 200 - total flux cleaned = 0.0142648 Jy ! Total flux subtracted in 200 components = 0.0142648 Jy ! Clean residual min=-0.010075 max=0.010658 Jy/beam ! Clean residual mean=0.001118 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 1.58386 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 163 components and 1.58386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217249Jy sigma=0.838054 ! Fit after self-cal, rms=0.217201Jy sigma=0.837736 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217201Jy sigma=0.837736 ! Fit after self-cal, rms=0.217381Jy sigma=0.837379 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=2.236 mas, bmaj=3.455 mas, bpa=-8.505 degrees ! Estimated noise=2.06256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612664 Jy ! Component: 100 - total flux cleaned = 0.00904591 Jy ! Component: 150 - total flux cleaned = 0.0118063 Jy ! Component: 200 - total flux cleaned = 0.0144774 Jy ! Total flux subtracted in 200 components = 0.0144774 Jy ! Clean residual min=-0.010310 max=0.013292 Jy/beam ! Clean residual mean=0.002459 rms=0.002905 Jy/beam ! Combined flux in latest and established models = 1.59834 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 1.59834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217259Jy sigma=0.836489 ! Fit after self-cal, rms=0.217248Jy sigma=0.836353 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134734 Jy ! Component: 100 - total flux cleaned = 0.0217914 Jy ! Component: 150 - total flux cleaned = 0.0259638 Jy ! Component: 200 - total flux cleaned = 0.027555 Jy ! Total flux subtracted in 200 components = 0.027555 Jy ! Clean residual min=-0.008692 max=0.011445 Jy/beam ! Clean residual mean=0.001772 rms=0.002743 Jy/beam ! Combined flux in latest and established models = 1.62589 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 216 components and 1.62589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216615Jy sigma=0.834315 ! Fit after self-cal, rms=0.216574Jy sigma=0.834091 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (0, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116762 Jy ! Component: 100 - total flux cleaned = 0.0181872 Jy ! Component: 150 - total flux cleaned = 0.0223047 Jy ! Component: 200 - total flux cleaned = 0.025703 Jy ! Total flux subtracted in 200 components = 0.025703 Jy ! Clean residual min=-0.008748 max=0.009921 Jy/beam ! Clean residual mean=0.001163 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 1.65159 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 265 components and 1.65159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216070Jy sigma=0.831860 ! Fit after self-cal, rms=0.216024Jy sigma=0.831631 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (-48, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900505 Jy ! Component: 100 - total flux cleaned = 0.0113536 Jy ! Component: 150 - total flux cleaned = 0.0126133 Jy ! Component: 200 - total flux cleaned = 0.0139788 Jy ! Total flux subtracted in 200 components = 0.0139788 Jy ! Clean residual min=-0.006802 max=0.009260 Jy/beam ! Clean residual mean=0.000938 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 1.66557 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 289 components and 1.66557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215690Jy sigma=0.829571 ! Fit after self-cal, rms=0.215643Jy sigma=0.829332 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6566 mas, bmaj=2.413 mas, bpa=-7.572 degrees ! Estimated noise=1.61973 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6566 x 2.413 at -7.572 degrees (North through East) ! Clean map min=-0.021092 max=1.3918 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215643Jy sigma=0.829332 ! Fit after self-cal, rms=0.197222Jy sigma=0.743876 ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6568 mas, bmaj=2.413 mas, bpa=-7.597 degrees ! Estimated noise=1.6215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328562 Jy ! Component: 100 - total flux cleaned = 0.00528445 Jy ! Component: 150 - total flux cleaned = 0.0064394 Jy ! Component: 200 - total flux cleaned = 0.00666552 Jy ! Total flux subtracted in 200 components = 0.00666552 Jy ! Clean residual min=-0.006755 max=0.007827 Jy/beam ! Clean residual mean=0.000400 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 1.67224 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 331 components and 1.67224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196475Jy sigma=0.741328 ! Fit after self-cal, rms=0.196454Jy sigma=0.741268 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (-27.8, 16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610826 Jy ! Component: 100 - total flux cleaned = 0.00803704 Jy ! Component: 150 - total flux cleaned = 0.00904215 Jy ! Component: 200 - total flux cleaned = 0.00942943 Jy ! Total flux subtracted in 200 components = 0.00942943 Jy ! Clean residual min=-0.006472 max=0.006406 Jy/beam ! Clean residual mean=0.000329 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 1.68167 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 356 components and 1.68167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195821Jy sigma=0.739060 ! Fit after self-cal, rms=0.195806Jy sigma=0.738971 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195806Jy sigma=0.738971 ! Fit after self-cal, rms=0.195069Jy sigma=0.736688 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6275 mas, bmaj=1.977 mas, bpa=-7.569 degrees ! Estimated noise=2.10321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.08861 Jy ! Component: 100 - total flux cleaned = 1.32735 Jy ! Component: 150 - total flux cleaned = 1.40311 Jy ! Component: 200 - total flux cleaned = 1.43753 Jy ! Total flux subtracted in 200 components = 1.43753 Jy ! Clean residual min=-0.016645 max=0.016788 Jy/beam ! Clean residual mean=0.000216 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 1.43753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.43753 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6568 mas, bmaj=2.413 mas, bpa=-7.596 degrees ! Estimated noise=1.62183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034302 Jy ! Component: 100 - total flux cleaned = 0.0601999 Jy ! Component: 150 - total flux cleaned = 0.0800271 Jy ! Component: 200 - total flux cleaned = 0.0943509 Jy ! Total flux subtracted in 200 components = 0.0943509 Jy ! Clean residual min=-0.013404 max=0.016879 Jy/beam ! Clean residual mean=0.001771 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 1.53188 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 1.53188 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (1.6, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145801 Jy ! Component: 100 - total flux cleaned = 0.0253098 Jy ! Component: 150 - total flux cleaned = 0.0351366 Jy ! Component: 200 - total flux cleaned = 0.0452152 Jy ! Total flux subtracted in 200 components = 0.0452152 Jy ! Clean residual min=-0.012243 max=0.012256 Jy/beam ! Clean residual mean=0.001321 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 1.57709 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 63 components and 1.57709 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Added new window around map position (-0.8, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941253 Jy ! Component: 100 - total flux cleaned = 0.0158674 Jy ! Component: 150 - total flux cleaned = 0.0223256 Jy ! Component: 200 - total flux cleaned = 0.0283843 Jy ! Total flux subtracted in 200 components = 0.0283843 Jy ! Clean residual min=-0.010871 max=0.010454 Jy/beam ! Clean residual mean=0.001050 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 1.60548 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 93 components and 1.60548 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=2.235 mas, bmaj=3.457 mas, bpa=-8.484 degrees ! Estimated noise=2.06614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129893 Jy ! Component: 100 - total flux cleaned = 0.0236273 Jy ! Component: 150 - total flux cleaned = 0.0321326 Jy ! Component: 200 - total flux cleaned = 0.0377466 Jy ! Total flux subtracted in 200 components = 0.0377466 Jy ! Clean residual min=-0.008860 max=0.009767 Jy/beam ! Clean residual mean=0.001641 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 1.64322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (48, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073565 Jy ! Component: 100 - total flux cleaned = 0.0126186 Jy ! Component: 150 - total flux cleaned = 0.0172194 Jy ! Component: 200 - total flux cleaned = 0.0212643 Jy ! Total flux subtracted in 200 components = 0.0212643 Jy ! Clean residual min=-0.007860 max=0.007835 Jy/beam ! Clean residual mean=0.001308 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 1.66449 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 177 components and 1.66449 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! Estimated beam: bmin=0.6568 mas, bmaj=2.413 mas, bpa=-7.596 degrees ! Estimated noise=1.62183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220417 Jy ! Component: 100 - total flux cleaned = -2.43804e-05 Jy ! Component: 150 - total flux cleaned = 0.00261306 Jy ! Component: 200 - total flux cleaned = 0.00539126 Jy ! Total flux subtracted in 200 components = 0.00539126 Jy ! Clean residual min=-0.008609 max=0.007909 Jy/beam ! Clean residual mean=0.000504 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.66988 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 212 components and 1.66988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197072Jy sigma=0.742319 ! Fit after self-cal, rms=0.196812Jy sigma=0.740037 wmodel /d2/scr/pima/rv101_uvs/J0501-0159_X_map.mod ! Writing 212 model components to file: /d2/scr/pima/rv101_uvs/J0501-0159_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0501-0159_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0501-0159_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0501-0159_X_map.win ! wwins: Wrote 13 windows to /d2/scr/pima/rv101_uvs/J0501-0159_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835764 Jy ! Component: 100 - total flux cleaned = 0.00219505 Jy ! Component: 150 - total flux cleaned = 0.00426138 Jy ! Component: 200 - total flux cleaned = 0.00626451 Jy ! Component: 250 - total flux cleaned = 0.00821271 Jy ! Component: 300 - total flux cleaned = 0.0101127 Jy ! Component: 350 - total flux cleaned = 0.0115068 Jy ! Component: 400 - total flux cleaned = 0.0128741 Jy ! Component: 450 - total flux cleaned = 0.0143263 Jy ! Component: 500 - total flux cleaned = 0.0156425 Jy ! Component: 550 - total flux cleaned = 0.0168284 Jy ! Component: 600 - total flux cleaned = 0.0178896 Jy ! Component: 650 - total flux cleaned = 0.0190403 Jy ! Component: 700 - total flux cleaned = 0.0202757 Jy ! Component: 750 - total flux cleaned = 0.0211909 Jy ! Component: 800 - total flux cleaned = 0.0222949 Jy ! Component: 850 - total flux cleaned = 0.023582 Jy ! Component: 900 - total flux cleaned = 0.0245591 Jy ! Component: 950 - total flux cleaned = 0.0258132 Jy ! Component: 1000 - total flux cleaned = 0.0268628 Jy ! Component: 1050 - total flux cleaned = 0.0279947 Jy ! Component: 1100 - total flux cleaned = 0.0291134 Jy ! Component: 1150 - total flux cleaned = 0.0300352 Jy ! Component: 1200 - total flux cleaned = 0.0309484 Jy ! Component: 1250 - total flux cleaned = 0.0318518 Jy ! Component: 1300 - total flux cleaned = 0.0327459 Jy ! Component: 1350 - total flux cleaned = 0.0335434 Jy ! Component: 1400 - total flux cleaned = 0.0343333 Jy ! Component: 1450 - total flux cleaned = 0.0350295 Jy ! Component: 1500 - total flux cleaned = 0.0359776 Jy ! Component: 1550 - total flux cleaned = 0.0367454 Jy ! Component: 1600 - total flux cleaned = 0.037338 Jy ! Component: 1650 - total flux cleaned = 0.0383448 Jy ! Component: 1700 - total flux cleaned = 0.0385942 Jy ! Component: 1750 - total flux cleaned = 0.0395031 Jy ! Component: 1800 - total flux cleaned = 0.040077 Jy ! Component: 1850 - total flux cleaned = 0.0409707 Jy ! Component: 1900 - total flux cleaned = 0.0413731 Jy ! Component: 1950 - total flux cleaned = 0.0421723 Jy ! Component: 2000 - total flux cleaned = 0.0428862 Jy ! Component: 2050 - total flux cleaned = 0.0433582 Jy ! Component: 2100 - total flux cleaned = 0.0441386 Jy ! Component: 2150 - total flux cleaned = 0.0444483 Jy ! Component: 2200 - total flux cleaned = 0.0452177 Jy ! Component: 2250 - total flux cleaned = 0.0458284 Jy ! Component: 2300 - total flux cleaned = 0.0464348 Jy ! Component: 2350 - total flux cleaned = 0.0469614 Jy ! Component: 2400 - total flux cleaned = 0.0474837 Jy ! Component: 2450 - total flux cleaned = 0.0481511 Jy ! Component: 2500 - total flux cleaned = 0.0485192 Jy ! Component: 2550 - total flux cleaned = 0.049177 Jy ! Component: 2600 - total flux cleaned = 0.0496124 Jy ! Component: 2650 - total flux cleaned = 0.0501169 Jy ! Component: 2700 - total flux cleaned = 0.0506184 Jy ! Component: 2750 - total flux cleaned = 0.0509738 Jy ! Component: 2800 - total flux cleaned = 0.0516096 Jy ! Component: 2850 - total flux cleaned = 0.0521711 Jy ! Component: 2900 - total flux cleaned = 0.0523107 Jy ! Component: 2950 - total flux cleaned = 0.0527958 Jy ! Component: 3000 - total flux cleaned = 0.0530718 Jy ! Component: 3050 - total flux cleaned = 0.0534143 Jy ! Component: 3100 - total flux cleaned = 0.0538903 Jy ! Component: 3150 - total flux cleaned = 0.0544986 Jy ! Component: 3200 - total flux cleaned = 0.0545655 Jy ! Component: 3250 - total flux cleaned = 0.0550333 Jy ! Component: 3300 - total flux cleaned = 0.0554981 Jy ! Component: 3350 - total flux cleaned = 0.0556959 Jy ! Component: 3400 - total flux cleaned = 0.0559588 Jy ! Component: 3450 - total flux cleaned = 0.0564156 Jy ! Component: 3500 - total flux cleaned = 0.0565458 Jy ! Component: 3550 - total flux cleaned = 0.0569329 Jy ! Component: 3600 - total flux cleaned = 0.0570611 Jy ! Component: 3650 - total flux cleaned = 0.0575714 Jy ! Component: 3700 - total flux cleaned = 0.0577614 Jy ! Component: 3750 - total flux cleaned = 0.0580769 Jy ! Component: 3800 - total flux cleaned = 0.0582657 Jy ! Component: 3850 - total flux cleaned = 0.0583907 Jy ! Component: 3900 - total flux cleaned = 0.0587012 Jy ! Component: 3950 - total flux cleaned = 0.059072 Jy ! Component: 4000 - total flux cleaned = 0.059195 Jy ! Component: 4050 - total flux cleaned = 0.0595616 Jy ! Total flux subtracted in 4096 components = 0.0596836 Jy ! Clean residual min=-0.003330 max=0.003715 Jy/beam ! Clean residual mean=0.000108 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 1.72956 Jy keep ! Adding 366 model components to the UV plane model. ! The established model now contains 576 components and 1.72956 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0501-0159_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6568 x 2.413 at -7.596 degrees (North through East) ! Clean map min=-0.010966 max=1.3965 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0501-0159_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.39654 invert ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.192 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00109016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234184 0.234184 0.468369 0.936737 1.87347 3.74695 7.4939 14.9878 29.9756 59.9512 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.396 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1281.04 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0501-0159_X_uvs.log closed on Sat Nov 29 16:30:04 2014