! Started logfile: /d2/scr/pima/rv101_uvs/J0339-0146_X_uvs.log on Sat Nov 29 16:29:25 2014 obs /d2/scr/pima/rv101_uvs/J0339-0146_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_X_uva.fits ! AN table 1: 49 integrations on 1 of 1 possible baselines. ! AN table 2: 66 integrations on 3 of 3 possible baselines. ! AN table 3: 11 integrations on 6 of 6 possible baselines. ! AN table 4: 22 integrations on 15 of 15 possible baselines. ! AN table 5: 22 integrations on 21 of 21 possible baselines. ! AN table 6: 22 integrations on 3 of 3 possible baselines. ! AN table 7: 11 integrations on 6 of 6 possible baselines. ! AN table 8: 11 integrations on 45 of 45 possible baselines. ! AN table 9: 9 integrations on 6 of 6 possible baselines. ! AN table 10: 9 integrations on 45 of 45 possible baselines. ! AN table 11: 18 integrations on 1 of 1 possible baselines. ! AN table 12: 9 integrations on 21 of 21 possible baselines. ! AN table 13: 9 integrations on 15 of 15 possible baselines. ! AN table 14: 9 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.850934 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8928 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0339-0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 34 telescope corrections were flagged in sub-array 4. ! A total of 53 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 47 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 38 telescope corrections were flagged in sub-array 10. ! A total of 36 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 34 telescope corrections were flagged in sub-array 4. ! A total of 53 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 47 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 38 telescope corrections were flagged in sub-array 10. ! A total of 36 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 59 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 47 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 38 telescope corrections were flagged in sub-array 10. ! A total of 36 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! A total of 198 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 59 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 13 telescope corrections were flagged in sub-array 7. ! A total of 47 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 38 telescope corrections were flagged in sub-array 10. ! A total of 36 telescope corrections were flagged in sub-array 11. ! A total of 15 telescope corrections were flagged in sub-array 12. ! A total of 26 telescope corrections were flagged in sub-array 13. ! A total of 18 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=1.883404Jy sigma=8.186478 ! Fit after self-cal, rms=0.931330Jy sigma=3.875412 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.5661 mas, bmaj=1.804 mas, bpa=-12.42 degrees ! Estimated noise=2.7246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.964597 Jy ! Component: 100 - total flux cleaned = 1.40732 Jy ! Total flux subtracted in 100 components = 1.40732 Jy ! Clean residual min=-0.082346 max=0.206171 Jy/beam ! Clean residual mean=0.001179 rms=0.016420 Jy/beam ! Combined flux in latest and established models = 1.40732 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.40732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.635881Jy sigma=2.425127 ! Fit after self-cal, rms=0.617462Jy sigma=2.376308 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23772 Jy ! Component: 100 - total flux cleaned = 0.361684 Jy ! Total flux subtracted in 100 components = 0.361684 Jy ! Clean residual min=-0.050992 max=0.088178 Jy/beam ! Clean residual mean=0.000857 rms=0.010602 Jy/beam ! Combined flux in latest and established models = 1.76901 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 1.76901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451553Jy sigma=1.677430 ! Fit after self-cal, rms=0.448934Jy sigma=1.671023 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (3.8, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0962596 Jy ! Component: 100 - total flux cleaned = 0.166182 Jy ! Total flux subtracted in 100 components = 0.166182 Jy ! Clean residual min=-0.040790 max=0.069862 Jy/beam ! Clean residual mean=0.000717 rms=0.009221 Jy/beam ! Combined flux in latest and established models = 1.93519 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 1.93519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397897Jy sigma=1.465077 ! Fit after self-cal, rms=0.396568Jy sigma=1.453473 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (2.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073162 Jy ! Component: 100 - total flux cleaned = 0.125615 Jy ! Total flux subtracted in 100 components = 0.125615 Jy ! Clean residual min=-0.037440 max=0.044463 Jy/beam ! Clean residual mean=0.000614 rms=0.008118 Jy/beam ! Combined flux in latest and established models = 2.06081 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 2.06081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363889Jy sigma=1.320180 ! Fit after self-cal, rms=0.362969Jy sigma=1.311258 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6434 mas, bmaj=1.961 mas, bpa=-11.78 degrees ! Estimated noise=2.30133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087732 Jy ! Component: 100 - total flux cleaned = 0.148882 Jy ! Component: 150 - total flux cleaned = 0.194755 Jy ! Component: 200 - total flux cleaned = 0.230205 Jy ! Total flux subtracted in 200 components = 0.230205 Jy ! Clean residual min=-0.027103 max=0.053998 Jy/beam ! Clean residual mean=0.007451 rms=0.008286 Jy/beam ! Combined flux in latest and established models = 2.29101 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 93 components and 2.29101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322619Jy sigma=1.177584 ! Fit after self-cal, rms=0.319899Jy sigma=1.153947 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (-0.8, 18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480324 Jy ! Component: 100 - total flux cleaned = 0.082304 Jy ! Component: 150 - total flux cleaned = 0.10909 Jy ! Component: 200 - total flux cleaned = 0.13011 Jy ! Total flux subtracted in 200 components = 0.13011 Jy ! Clean residual min=-0.028602 max=0.043932 Jy/beam ! Clean residual mean=0.005378 rms=0.007535 Jy/beam ! Combined flux in latest and established models = 2.42112 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 122 components and 2.42112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303833Jy sigma=1.116592 ! Fit after self-cal, rms=0.302870Jy sigma=1.109628 ! Inverting map ! Your choice of large map pixels excluded 1.17% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6434 x 1.961 at -11.78 degrees (North through East) ! Clean map min=-0.027027 max=1.2213 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 123 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* NL 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.99 HN 1.00* KP 1.00* LA 1.01 ! MK 1.03 NL 1.00 OV 0.96 PT 0.99 ! SC 1.04 WF 0.86 ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.01 KP 1.00* LA 1.07 MK 0.99 ! NL 1.16 OV 0.99 PT 1.00 ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.04 MK 1.02 ! OV 0.97 PT 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! KP 1.00* LA 1.03 MK 1.03 OV 0.95 ! PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 123 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.96 NY 0.89 ON 0.84 SC 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.99 HN 1.02 NL 1.00 WF 0.85 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00 HN 1.00* KP 1.00* LA 0.96 ! MK 1.02 NL 1.00 OV 0.94 PT 0.89 ! SC 1.08 WF 0.86 ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 0.99 MK 1.05 ! OV 0.95 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! KP 1.00* LA 0.99 MK 1.05 OV 0.94 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.14 MA 1.05 NY 1.00* ON 0.95 ! SC 0.98 WF 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 0.91 MA 0.92 ON 1.11 WF 0.93 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.98 HN 1.06 NL 1.04 WF 0.90 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.02 HN 1.00* KP 1.00* LA 1.03 ! MK 1.05 NL 1.03 OV 1.02 PT 0.91 ! SC 1.04 WF 0.89 ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.06 MK 1.03 ! OV 1.04 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! KP 1.00* LA 1.06 MK 1.03 OV 1.06 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.08 MA 1.06 NY 1.00* ON 1.07 ! SC 1.10 WF 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.01 MA 1.18 ON 1.07 WF 0.99 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.98 HN 1.08 NL 1.07 WF 1.00 ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.01 HN 1.00* KP 1.00* LA 1.02 ! MK 1.13 NL 1.06 OV 0.99 PT 0.92 ! SC 1.06 WF 1.01 ! ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.05 MK 1.10 ! OV 1.00 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! KP 1.00* LA 1.08 MK 1.08 OV 1.02 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.302870Jy sigma=1.109628 ! Fit after self-cal, rms=0.276360Jy sigma=1.030643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6409 mas, bmaj=1.969 mas, bpa=-11.67 degrees ! Estimated noise=2.35424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229423 Jy ! Component: 100 - total flux cleaned = 0.0375145 Jy ! Component: 150 - total flux cleaned = 0.0436 Jy ! Component: 200 - total flux cleaned = 0.0446937 Jy ! Total flux subtracted in 200 components = 0.0446937 Jy ! Clean residual min=-0.023237 max=0.033638 Jy/beam ! Clean residual mean=0.004900 rms=0.006631 Jy/beam ! Combined flux in latest and established models = 2.46581 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 2.46581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272520Jy sigma=1.021992 ! Fit after self-cal, rms=0.272116Jy sigma=1.019366 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272116Jy sigma=1.019366 ! Fit after self-cal, rms=0.270539Jy sigma=1.014812 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.641 mas, bmaj=1.97 mas, bpa=-11.7 degrees ! Estimated noise=2.35557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129071 Jy ! Component: 100 - total flux cleaned = 0.0158714 Jy ! Component: 150 - total flux cleaned = 0.0162328 Jy ! Component: 200 - total flux cleaned = 0.0168703 Jy ! Total flux subtracted in 200 components = 0.0168703 Jy ! Clean residual min=-0.023030 max=0.031804 Jy/beam ! Clean residual mean=0.004614 rms=0.006454 Jy/beam ! Combined flux in latest and established models = 2.48268 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 147 components and 2.48268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268826Jy sigma=1.010448 ! Fit after self-cal, rms=0.268666Jy sigma=1.009424 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311285 Jy ! Component: 100 - total flux cleaned = 0.0496042 Jy ! Component: 150 - total flux cleaned = 0.059904 Jy ! Component: 200 - total flux cleaned = 0.0660347 Jy ! Total flux subtracted in 200 components = 0.0660347 Jy ! Clean residual min=-0.021808 max=0.026633 Jy/beam ! Clean residual mean=0.003482 rms=0.006142 Jy/beam ! Combined flux in latest and established models = 2.54872 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 2.54872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261851Jy sigma=0.994474 ! Fit after self-cal, rms=0.261464Jy sigma=0.992402 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (6.8, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288883 Jy ! Component: 100 - total flux cleaned = 0.0455508 Jy ! Component: 150 - total flux cleaned = 0.0511607 Jy ! Component: 200 - total flux cleaned = 0.0533643 Jy ! Total flux subtracted in 200 components = 0.0533643 Jy ! Clean residual min=-0.021211 max=0.024207 Jy/beam ! Clean residual mean=0.002551 rms=0.005591 Jy/beam ! Combined flux in latest and established models = 2.60208 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 201 components and 2.60208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257151Jy sigma=0.972152 ! Fit after self-cal, rms=0.256754Jy sigma=0.969822 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256754Jy sigma=0.969822 ! Fit after self-cal, rms=0.233441Jy sigma=0.880000 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6388 mas, bmaj=1.969 mas, bpa=-11.7 degrees ! Estimated noise=2.34933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598366 Jy ! Component: 100 - total flux cleaned = 0.00927946 Jy ! Component: 150 - total flux cleaned = 0.0107095 Jy ! Component: 200 - total flux cleaned = 0.0123627 Jy ! Total flux subtracted in 200 components = 0.0123627 Jy ! Clean residual min=-0.015130 max=0.018465 Jy/beam ! Clean residual mean=0.001751 rms=0.004105 Jy/beam ! Combined flux in latest and established models = 2.61445 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 211 components and 2.61445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232133Jy sigma=0.873310 ! Fit after self-cal, rms=0.231990Jy sigma=0.872921 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.8, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162498 Jy ! Component: 100 - total flux cleaned = 0.0185572 Jy ! Component: 150 - total flux cleaned = 0.0188674 Jy ! Component: 200 - total flux cleaned = 0.0197463 Jy ! Total flux subtracted in 200 components = 0.0197463 Jy ! Clean residual min=-0.015597 max=0.015633 Jy/beam ! Clean residual mean=0.001443 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 2.63419 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 231 components and 2.63419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230378Jy sigma=0.865556 ! Fit after self-cal, rms=0.230222Jy sigma=0.864794 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230222Jy sigma=0.864794 ! Fit after self-cal, rms=0.230057Jy sigma=0.864538 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=2.114 mas, bmaj=2.981 mas, bpa=-14.81 degrees ! Estimated noise=3.52824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188586 Jy ! Component: 100 - total flux cleaned = 0.0237338 Jy ! Component: 150 - total flux cleaned = 0.0260518 Jy ! Component: 200 - total flux cleaned = 0.0281516 Jy ! Total flux subtracted in 200 components = 0.0281516 Jy ! Clean residual min=-0.021086 max=0.027232 Jy/beam ! Clean residual mean=0.003489 rms=0.007154 Jy/beam ! Combined flux in latest and established models = 2.66235 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 242 components and 2.66235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229185Jy sigma=0.863014 ! Fit after self-cal, rms=0.229121Jy sigma=0.862219 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374445 Jy ! Component: 100 - total flux cleaned = 0.00450799 Jy ! Component: 150 - total flux cleaned = 0.00556694 Jy ! Component: 200 - total flux cleaned = 0.00655492 Jy ! Total flux subtracted in 200 components = 0.00655492 Jy ! Clean residual min=-0.021088 max=0.026194 Jy/beam ! Clean residual mean=0.003184 rms=0.006871 Jy/beam ! Combined flux in latest and established models = 2.6689 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 247 components and 2.6689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228990Jy sigma=0.863107 ! Fit after self-cal, rms=0.229008Jy sigma=0.862853 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6384 mas, bmaj=1.967 mas, bpa=-11.75 degrees ! Estimated noise=2.34819 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6384 x 1.967 at -11.75 degrees (North through East) ! Clean map min=-0.014537 max=1.1916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229008Jy sigma=0.862853 ! Fit after self-cal, rms=0.219425Jy sigma=0.813697 ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6387 mas, bmaj=1.969 mas, bpa=-11.78 degrees ! Estimated noise=2.3523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156475 Jy ! Component: 100 - total flux cleaned = 7.76299e-05 Jy ! Component: 150 - total flux cleaned = -0.000984955 Jy ! Component: 200 - total flux cleaned = -0.00122116 Jy ! Total flux subtracted in 200 components = -0.00122116 Jy ! Clean residual min=-0.015036 max=0.013153 Jy/beam ! Clean residual mean=0.000819 rms=0.003441 Jy/beam ! Combined flux in latest and established models = 2.66768 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 261 components and 2.66768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218612Jy sigma=0.809586 ! Fit after self-cal, rms=0.218614Jy sigma=0.809416 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013255 Jy ! Component: 100 - total flux cleaned = 0.00109698 Jy ! Component: 150 - total flux cleaned = 0.000438951 Jy ! Component: 200 - total flux cleaned = 2.5553e-05 Jy ! Total flux subtracted in 200 components = 2.5553e-05 Jy ! Clean residual min=-0.014859 max=0.012926 Jy/beam ! Clean residual mean=0.000822 rms=0.003411 Jy/beam ! Combined flux in latest and established models = 2.6677 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 268 components and 2.6677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218123Jy sigma=0.806842 ! Fit after self-cal, rms=0.218117Jy sigma=0.806757 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218117Jy sigma=0.806757 ! Fit after self-cal, rms=0.217629Jy sigma=0.803245 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.5615 mas, bmaj=1.81 mas, bpa=-12.32 degrees ! Estimated noise=2.79882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.944803 Jy ! Component: 100 - total flux cleaned = 1.38699 Jy ! Component: 150 - total flux cleaned = 1.61584 Jy ! Component: 200 - total flux cleaned = 1.764 Jy ! Total flux subtracted in 200 components = 1.764 Jy ! Clean residual min=-0.047982 max=0.084772 Jy/beam ! Clean residual mean=0.000858 rms=0.010111 Jy/beam ! Combined flux in latest and established models = 1.764 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.764 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6386 mas, bmaj=1.968 mas, bpa=-11.77 degrees ! Estimated noise=2.35436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185509 Jy ! Component: 100 - total flux cleaned = 0.313444 Jy ! Component: 150 - total flux cleaned = 0.406759 Jy ! Component: 200 - total flux cleaned = 0.476986 Jy ! Total flux subtracted in 200 components = 0.476986 Jy ! Clean residual min=-0.019153 max=0.051397 Jy/beam ! Clean residual mean=0.008216 rms=0.006758 Jy/beam ! Combined flux in latest and established models = 2.24098 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 70 components and 2.24098 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (1.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577556 Jy ! Component: 100 - total flux cleaned = 0.102999 Jy ! Component: 150 - total flux cleaned = 0.140633 Jy ! Component: 200 - total flux cleaned = 0.172737 Jy ! Total flux subtracted in 200 components = 0.172737 Jy ! Clean residual min=-0.013937 max=0.025830 Jy/beam ! Clean residual mean=0.005191 rms=0.004680 Jy/beam ! Combined flux in latest and established models = 2.41372 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 117 components and 2.41372 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (4.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294017 Jy ! Component: 100 - total flux cleaned = 0.0544681 Jy ! Component: 150 - total flux cleaned = 0.0767274 Jy ! Component: 200 - total flux cleaned = 0.0966968 Jy ! Total flux subtracted in 200 components = 0.0966968 Jy ! Clean residual min=-0.012708 max=0.019787 Jy/beam ! Clean residual mean=0.003504 rms=0.003973 Jy/beam ! Combined flux in latest and established models = 2.51042 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 152 components and 2.51042 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (37.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02021 Jy ! Component: 100 - total flux cleaned = 0.0368718 Jy ! Component: 150 - total flux cleaned = 0.0520514 Jy ! Component: 200 - total flux cleaned = 0.0658966 Jy ! Total flux subtracted in 200 components = 0.0658966 Jy ! Clean residual min=-0.011966 max=0.016155 Jy/beam ! Clean residual mean=0.002395 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 2.57631 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 182 components and 2.57631 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (-26, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154706 Jy ! Component: 100 - total flux cleaned = 0.0274501 Jy ! Component: 150 - total flux cleaned = 0.0375769 Jy ! Component: 200 - total flux cleaned = 0.045753 Jy ! Total flux subtracted in 200 components = 0.045753 Jy ! Clean residual min=-0.011750 max=0.014899 Jy/beam ! Clean residual mean=0.001631 rms=0.003398 Jy/beam ! Combined flux in latest and established models = 2.62207 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 207 components and 2.62207 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Added new window around map position (-1.6, 35.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142869 Jy ! Component: 100 - total flux cleaned = 0.0231983 Jy ! Component: 150 - total flux cleaned = 0.0278764 Jy ! Component: 200 - total flux cleaned = 0.031303 Jy ! Total flux subtracted in 200 components = 0.031303 Jy ! Clean residual min=-0.012115 max=0.013205 Jy/beam ! Clean residual mean=0.001170 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 2.65337 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 229 components and 2.65337 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=2.113 mas, bmaj=2.981 mas, bpa=-14.74 degrees ! Estimated noise=3.5394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166654 Jy ! Component: 100 - total flux cleaned = 0.0279979 Jy ! Component: 150 - total flux cleaned = 0.0332056 Jy ! Component: 200 - total flux cleaned = 0.0353866 Jy ! Total flux subtracted in 200 components = 0.0353866 Jy ! Clean residual min=-0.017199 max=0.020143 Jy/beam ! Clean residual mean=0.001644 rms=0.005369 Jy/beam ! Combined flux in latest and established models = 2.68876 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206997 Jy ! Component: 100 - total flux cleaned = 0.00325646 Jy ! Component: 150 - total flux cleaned = 0.00439463 Jy ! Component: 200 - total flux cleaned = 0.00548069 Jy ! Total flux subtracted in 200 components = 0.00548069 Jy ! Clean residual min=-0.017630 max=0.019330 Jy/beam ! Clean residual mean=0.001385 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 2.69424 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 260 components and 2.69424 Jy ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! Estimated beam: bmin=0.6386 mas, bmaj=1.968 mas, bpa=-11.77 degrees ! Estimated noise=2.35436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00554109 Jy ! Component: 100 - total flux cleaned = -0.00584542 Jy ! Component: 150 - total flux cleaned = -0.00474404 Jy ! Component: 200 - total flux cleaned = -0.00370203 Jy ! Total flux subtracted in 200 components = -0.00370203 Jy ! Clean residual min=-0.012249 max=0.011613 Jy/beam ! Clean residual mean=0.000533 rms=0.003045 Jy/beam ! Combined flux in latest and established models = 2.69054 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 278 components and 2.69053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216804Jy sigma=0.794069 ! Fit after self-cal, rms=0.216105Jy sigma=0.790287 wmodel /d2/scr/pima/rv101_uvs/J0339-0146_X_map.mod ! Writing 278 model components to file: /d2/scr/pima/rv101_uvs/J0339-0146_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0339-0146_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0339-0146_X_map.win ! wwins: Wrote 12 windows to /d2/scr/pima/rv101_uvs/J0339-0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012718 Jy ! Component: 100 - total flux cleaned = 1.66144e-05 Jy ! Component: 150 - total flux cleaned = -0.000789095 Jy ! Component: 200 - total flux cleaned = -0.000985386 Jy ! Component: 250 - total flux cleaned = -0.000795234 Jy ! Component: 300 - total flux cleaned = -0.000798098 Jy ! Component: 350 - total flux cleaned = -0.00116539 Jy ! Component: 400 - total flux cleaned = -0.00116475 Jy ! Component: 450 - total flux cleaned = -0.000810909 Jy ! Component: 500 - total flux cleaned = -0.000810112 Jy ! Component: 550 - total flux cleaned = -0.00029757 Jy ! Component: 600 - total flux cleaned = -0.000467994 Jy ! Component: 650 - total flux cleaned = -0.000633735 Jy ! Component: 700 - total flux cleaned = -0.000469599 Jy ! Component: 750 - total flux cleaned = -0.000307576 Jy ! Component: 800 - total flux cleaned = -0.00030671 Jy ! Component: 850 - total flux cleaned = -0.000147635 Jy ! Component: 900 - total flux cleaned = -0.000148064 Jy ! Component: 950 - total flux cleaned = 5.95006e-06 Jy ! Component: 1000 - total flux cleaned = 6.5057e-06 Jy ! Component: 1050 - total flux cleaned = 0.000156761 Jy ! Component: 1100 - total flux cleaned = 8.79663e-06 Jy ! Component: 1150 - total flux cleaned = 0.000156366 Jy ! Component: 1200 - total flux cleaned = 0.000446692 Jy ! Component: 1250 - total flux cleaned = 0.000589948 Jy ! Component: 1300 - total flux cleaned = 0.000732111 Jy ! Component: 1350 - total flux cleaned = 0.000872771 Jy ! Component: 1400 - total flux cleaned = 0.00115219 Jy ! Component: 1450 - total flux cleaned = 0.00115238 Jy ! Component: 1500 - total flux cleaned = 0.00142643 Jy ! Component: 1550 - total flux cleaned = 0.00142802 Jy ! Component: 1600 - total flux cleaned = 0.00169689 Jy ! Component: 1650 - total flux cleaned = 0.0018306 Jy ! Component: 1700 - total flux cleaned = 0.00209457 Jy ! Component: 1750 - total flux cleaned = 0.00222448 Jy ! Component: 1800 - total flux cleaned = 0.00248344 Jy ! Component: 1850 - total flux cleaned = 0.0026115 Jy ! Component: 1900 - total flux cleaned = 0.00286637 Jy ! Component: 1950 - total flux cleaned = 0.00299259 Jy ! Component: 2000 - total flux cleaned = 0.00324358 Jy ! Component: 2050 - total flux cleaned = 0.00324373 Jy ! Component: 2100 - total flux cleaned = 0.00361437 Jy ! Component: 2150 - total flux cleaned = 0.00373699 Jy ! Component: 2200 - total flux cleaned = 0.00410184 Jy ! Component: 2250 - total flux cleaned = 0.00422261 Jy ! Component: 2300 - total flux cleaned = 0.0042235 Jy ! Component: 2350 - total flux cleaned = 0.00458028 Jy ! Component: 2400 - total flux cleaned = 0.00446265 Jy ! Component: 2450 - total flux cleaned = 0.00481495 Jy ! Component: 2500 - total flux cleaned = 0.00469864 Jy ! Component: 2550 - total flux cleaned = 0.00481508 Jy ! Component: 2600 - total flux cleaned = 0.00515956 Jy ! Component: 2650 - total flux cleaned = 0.00515893 Jy ! Component: 2700 - total flux cleaned = 0.00504573 Jy ! Component: 2750 - total flux cleaned = 0.00538238 Jy ! Component: 2800 - total flux cleaned = 0.00515888 Jy ! Component: 2850 - total flux cleaned = 0.0053815 Jy ! Component: 2900 - total flux cleaned = 0.0052715 Jy ! Component: 2950 - total flux cleaned = 0.00549055 Jy ! Component: 3000 - total flux cleaned = 0.00549139 Jy ! Component: 3050 - total flux cleaned = 0.0055991 Jy ! Component: 3100 - total flux cleaned = 0.00592046 Jy ! Component: 3150 - total flux cleaned = 0.00592045 Jy ! Component: 3200 - total flux cleaned = 0.0060267 Jy ! Component: 3250 - total flux cleaned = 0.00623715 Jy ! Component: 3300 - total flux cleaned = 0.0060274 Jy ! Component: 3350 - total flux cleaned = 0.00602761 Jy ! Component: 3400 - total flux cleaned = 0.00613178 Jy ! Component: 3450 - total flux cleaned = 0.00623435 Jy ! Component: 3500 - total flux cleaned = 0.00623491 Jy ! Component: 3550 - total flux cleaned = 0.00623507 Jy ! Component: 3600 - total flux cleaned = 0.00633546 Jy ! Component: 3650 - total flux cleaned = 0.00643689 Jy ! Component: 3700 - total flux cleaned = 0.00663679 Jy ! Component: 3750 - total flux cleaned = 0.00643831 Jy ! Component: 3800 - total flux cleaned = 0.00643874 Jy ! Component: 3850 - total flux cleaned = 0.00653706 Jy ! Component: 3900 - total flux cleaned = 0.00663466 Jy ! Component: 3950 - total flux cleaned = 0.00673155 Jy ! Component: 4000 - total flux cleaned = 0.0068279 Jy ! Component: 4050 - total flux cleaned = 0.00682742 Jy ! Total flux subtracted in 4096 components = 0.00673175 Jy ! Clean residual min=-0.005296 max=0.005371 Jy/beam ! Clean residual mean=0.000284 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 2.69727 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 623 components and 2.69727 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0339-0146_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6386 x 1.968 at -11.77 degrees (North through East) ! Clean map min=-0.013847 max=1.1864 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.18636 invert ! Inverting map ! Your choice of large map pixels excluded 1.31% of the data. ! The x-axis pixel size should ideally be below 0.1886 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00169006 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.427374 0.427374 0.854749 1.7095 3.419 6.83799 13.676 27.352 54.7039 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.186 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 701.96 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0339-0146_X_uvs.log closed on Sat Nov 29 16:29:31 2014