! Started logfile: /d2/scr/pima/rv101_uvs/J0339-0146_S_uvs.log on Sat Nov 29 13:49:44 2014 obs /d2/scr/pima/rv101_uvs/J0339-0146_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_S_uva.fits ! AN table 1: 10 integrations on 1 of 1 possible baselines. ! AN table 2: 12 integrations on 3 of 3 possible baselines. ! AN table 3: 2 integrations on 6 of 6 possible baselines. ! AN table 4: 4 integrations on 15 of 15 possible baselines. ! AN table 5: 4 integrations on 21 of 21 possible baselines. ! AN table 6: 4 integrations on 3 of 3 possible baselines. ! AN table 7: 2 integrations on 6 of 6 possible baselines. ! AN table 8: 2 integrations on 45 of 45 possible baselines. ! AN table 9: 2 integrations on 6 of 6 possible baselines. ! AN table 10: 2 integrations on 45 of 45 possible baselines. ! AN table 11: 2 integrations on 3 of 3 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! AN table 13: 2 integrations on 21 of 21 possible baselines. ! AN table 14: 2 integrations on 15 of 15 possible baselines. ! AN table 15: 2 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.982625 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2036 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0339-0146_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 10. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=3.452595Jy sigma=10.684758 ! Fit after self-cal, rms=2.494158Jy sigma=5.897480 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.891 mas, bpa=-17.64 degrees ! Estimated noise=5.34546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47539 Jy ! Component: 100 - total flux cleaned = 2.09461 Jy ! Total flux subtracted in 100 components = 2.09461 Jy ! Clean residual min=-0.160973 max=0.369735 Jy/beam ! Clean residual mean=-0.000763 rms=0.032330 Jy/beam ! Combined flux in latest and established models = 2.09461 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 2.09461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.018430Jy sigma=3.380892 ! Fit after self-cal, rms=2.016601Jy sigma=3.370828 ! Inverting map ! Added new window around map position (3.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.410057 Jy ! Component: 100 - total flux cleaned = 0.678137 Jy ! Total flux subtracted in 100 components = 0.678137 Jy ! Clean residual min=-0.176909 max=0.193306 Jy/beam ! Clean residual mean=-0.001088 rms=0.023249 Jy/beam ! Combined flux in latest and established models = 2.77275 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 2.77274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.829660Jy sigma=2.577272 ! Fit after self-cal, rms=1.826131Jy sigma=2.550613 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205916 Jy ! Component: 100 - total flux cleaned = 0.329271 Jy ! Total flux subtracted in 100 components = 0.329271 Jy ! Clean residual min=-0.176399 max=0.121145 Jy/beam ! Clean residual mean=-0.001245 rms=0.020735 Jy/beam ! Combined flux in latest and established models = 3.10202 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 3.10202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.767509Jy sigma=2.561569 ! Fit after self-cal, rms=1.765988Jy sigma=2.548846 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.201 mas, bpa=-17.53 degrees ! Estimated noise=4.16449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.128535 Jy ! Component: 100 - total flux cleaned = -0.171982 Jy ! Component: 150 - total flux cleaned = -0.172079 Jy ! Component: 200 - total flux cleaned = -0.174469 Jy ! Total flux subtracted in 200 components = -0.174469 Jy ! Clean residual min=-0.156541 max=0.064259 Jy/beam ! Clean residual mean=-0.031386 rms=0.018139 Jy/beam ! Combined flux in latest and established models = 2.92755 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 2.92755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.748341Jy sigma=2.393289 ! Fit after self-cal, rms=1.748303Jy sigma=2.390792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 8.201 at -17.53 degrees (North through East) ! Clean map min=-0.14762 max=1.8835 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* NL 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.16 LA 1.10 MK 0.85 OV 0.94 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* NL 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.94 HN 1.06 KP 1.18 LA 0.99 ! MK 1.00* NL 0.91 OV 1.00 PT 0.98 ! SC 1.11 WF 1.20 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 0.96 KP 1.14 LA 1.02 MK 0.91 ! OV 0.98 PT 0.99 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MA 1.00* NY 1.00* ON 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* NL 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.02 KP 1.00 LA 0.94 MK 0.89 ! OV 0.98 PT 0.98 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.03 LA 0.92 MK 0.87 OV 0.99 ! PT 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! MA 0.00* NY 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! MA 0.00* ON 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 0.00* MA 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* ON 1.00* OV 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* NL 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MK 0.00* OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! ! Fit before self-cal, rms=1.748303Jy sigma=2.390792 ! Fit after self-cal, rms=1.491014Jy sigma=2.290400 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.223 mas, bpa=-17.17 degrees ! Estimated noise=4.19925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0225944 Jy ! Component: 100 - total flux cleaned = -0.0225342 Jy ! Component: 150 - total flux cleaned = -0.0223973 Jy ! Component: 200 - total flux cleaned = -0.0224109 Jy ! Total flux subtracted in 200 components = -0.0224109 Jy ! Clean residual min=-0.127294 max=0.061768 Jy/beam ! Clean residual mean=-0.029785 rms=0.017124 Jy/beam ! Combined flux in latest and established models = 2.90514 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 2.90514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.475466Jy sigma=2.263401 ! Fit after self-cal, rms=1.475394Jy sigma=2.261730 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.475394Jy sigma=2.261730 ! Fit after self-cal, rms=1.474612Jy sigma=2.249463 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.23 mas, bpa=-17.2 degrees ! Estimated noise=4.19948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062167 Jy ! Component: 100 - total flux cleaned = 0.00621985 Jy ! Component: 150 - total flux cleaned = 0.00621763 Jy ! Component: 200 - total flux cleaned = 0.00621615 Jy ! Total flux subtracted in 200 components = 0.00621615 Jy ! Clean residual min=-0.123385 max=0.059760 Jy/beam ! Clean residual mean=-0.029949 rms=0.016877 Jy/beam ! Combined flux in latest and established models = 2.91135 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 2.91135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.463338Jy sigma=2.236395 ! Fit after self-cal, rms=1.463303Jy sigma=2.234913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137554 Jy ! Component: 100 - total flux cleaned = -9.27836e-06 Jy ! Component: 150 - total flux cleaned = -8.80839e-06 Jy ! Component: 200 - total flux cleaned = -2.20686e-05 Jy ! Total flux subtracted in 200 components = -2.20686e-05 Jy ! Clean residual min=-0.119699 max=0.059582 Jy/beam ! Clean residual mean=-0.029947 rms=0.016727 Jy/beam ! Combined flux in latest and established models = 2.91133 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 2.91133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.455467Jy sigma=2.225307 ! Fit after self-cal, rms=1.455466Jy sigma=2.223837 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.455466Jy sigma=2.223837 ! Fit after self-cal, rms=1.455485Jy sigma=2.223565 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.227 mas, bpa=-17.2 degrees ! Estimated noise=4.2043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143554 Jy ! Component: 100 - total flux cleaned = 0.00146515 Jy ! Component: 150 - total flux cleaned = 0.00145876 Jy ! Component: 200 - total flux cleaned = 0.000412488 Jy ! Total flux subtracted in 200 components = 0.000412488 Jy ! Clean residual min=-0.116901 max=0.059643 Jy/beam ! Clean residual mean=-0.029988 rms=0.016690 Jy/beam ! Combined flux in latest and established models = 2.91174 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 2.91174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.449049Jy sigma=2.217874 ! Fit after self-cal, rms=1.449041Jy sigma=2.216644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.44902e-05 Jy ! Component: 100 - total flux cleaned = -0.000985782 Jy ! Component: 150 - total flux cleaned = -0.00100627 Jy ! Component: 200 - total flux cleaned = -0.00191974 Jy ! Total flux subtracted in 200 components = -0.00191974 Jy ! Clean residual min=-0.118073 max=0.058817 Jy/beam ! Clean residual mean=-0.029925 rms=0.016613 Jy/beam ! Combined flux in latest and established models = 2.90982 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 2.90982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.444022Jy sigma=2.211575 ! Fit after self-cal, rms=1.444096Jy sigma=2.210453 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.444096Jy sigma=2.210453 ! Fit after self-cal, rms=1.444101Jy sigma=2.210348 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.171 mas, bmaj=12.59 mas, bpa=-19.99 degrees ! Estimated noise=5.60136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.036651 Jy ! Component: 100 - total flux cleaned = -0.0435376 Jy ! Component: 150 - total flux cleaned = -0.0471707 Jy ! Component: 200 - total flux cleaned = -0.0504366 Jy ! Total flux subtracted in 200 components = -0.0504366 Jy ! Clean residual min=-0.151442 max=0.044594 Jy/beam ! Clean residual mean=-0.063932 rms=0.026675 Jy/beam ! Combined flux in latest and established models = 2.85939 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 2.85939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.436799Jy sigma=2.218804 ! Fit after self-cal, rms=1.436166Jy sigma=2.216080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000696462 Jy ! Component: 100 - total flux cleaned = -0.00377328 Jy ! Component: 150 - total flux cleaned = -0.00659074 Jy ! Component: 200 - total flux cleaned = -0.00831764 Jy ! Total flux subtracted in 200 components = -0.00831764 Jy ! Clean residual min=-0.153038 max=0.046701 Jy/beam ! Clean residual mean=-0.063316 rms=0.026639 Jy/beam ! Combined flux in latest and established models = 2.85107 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 2.85107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.430926Jy sigma=2.227571 ! Fit after self-cal, rms=1.430268Jy sigma=2.225045 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.224 mas, bpa=-17.19 degrees ! Estimated noise=4.207 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 8.224 at -17.19 degrees (North through East) ! Clean map min=-0.1206 max=1.8921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.430268Jy sigma=2.225045 ! Fit after self-cal, rms=1.430142Jy sigma=2.222707 ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.227 mas, bpa=-17.19 degrees ! Estimated noise=4.20128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242263 Jy ! Component: 100 - total flux cleaned = 0.0265995 Jy ! Component: 150 - total flux cleaned = 0.0286587 Jy ! Component: 200 - total flux cleaned = 0.0305217 Jy ! Total flux subtracted in 200 components = 0.0305217 Jy ! Clean residual min=-0.121800 max=0.058268 Jy/beam ! Clean residual mean=-0.028860 rms=0.016555 Jy/beam ! Combined flux in latest and established models = 2.88159 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 2.88159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.427439Jy sigma=2.209801 ! Fit after self-cal, rms=1.427318Jy sigma=2.208301 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282845 Jy ! Component: 100 - total flux cleaned = 0.00367541 Jy ! Component: 150 - total flux cleaned = 0.00442273 Jy ! Component: 200 - total flux cleaned = 0.00371754 Jy ! Total flux subtracted in 200 components = 0.00371754 Jy ! Clean residual min=-0.120287 max=0.056528 Jy/beam ! Clean residual mean=-0.028981 rms=0.016442 Jy/beam ! Combined flux in latest and established models = 2.88531 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 2.88531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.426239Jy sigma=2.200923 ! Fit after self-cal, rms=1.426199Jy sigma=2.200103 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.426199Jy sigma=2.200103 ! Fit after self-cal, rms=1.426164Jy sigma=2.199792 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.871 mas, bpa=-17.11 degrees ! Estimated noise=5.33028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51848 Jy ! Component: 100 - total flux cleaned = 2.16302 Jy ! Component: 150 - total flux cleaned = 2.53109 Jy ! Component: 200 - total flux cleaned = 2.78313 Jy ! Total flux subtracted in 200 components = 2.78313 Jy ! Clean residual min=-0.163769 max=0.148870 Jy/beam ! Clean residual mean=-0.001135 rms=0.021452 Jy/beam ! Combined flux in latest and established models = 2.78312 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 2.78312 Jy ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.227 mas, bpa=-17.2 degrees ! Estimated noise=4.20488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0719858 Jy ! Component: 100 - total flux cleaned = 0.0833104 Jy ! Component: 150 - total flux cleaned = 0.0900584 Jy ! Component: 200 - total flux cleaned = 0.0931079 Jy ! Total flux subtracted in 200 components = 0.0931079 Jy ! Clean residual min=-0.145193 max=0.072035 Jy/beam ! Clean residual mean=-0.028782 rms=0.018198 Jy/beam ! Combined flux in latest and established models = 2.87623 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 2.87623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.168 mas, bmaj=12.59 mas, bpa=-20.02 degrees ! Estimated noise=5.59989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0029594 Jy ! Component: 100 - total flux cleaned = -0.00724037 Jy ! Component: 150 - total flux cleaned = -0.00913169 Jy ! Component: 200 - total flux cleaned = -0.0126641 Jy ! Total flux subtracted in 200 components = -0.0126641 Jy ! Clean residual min=-0.152904 max=0.049621 Jy/beam ! Clean residual mean=-0.064120 rms=0.027131 Jy/beam ! Combined flux in latest and established models = 2.86357 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158817 Jy ! Component: 100 - total flux cleaned = -0.00457853 Jy ! Component: 150 - total flux cleaned = -0.00596152 Jy ! Component: 200 - total flux cleaned = -0.00846109 Jy ! Total flux subtracted in 200 components = -0.00846109 Jy ! Clean residual min=-0.153727 max=0.049473 Jy/beam ! Clean residual mean=-0.063495 rms=0.026950 Jy/beam ! Combined flux in latest and established models = 2.85511 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 2.85511 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.227 mas, bpa=-17.2 degrees ! Estimated noise=4.20488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168613 Jy ! Component: 100 - total flux cleaned = 0.0193237 Jy ! Component: 150 - total flux cleaned = 0.0234514 Jy ! Component: 200 - total flux cleaned = 0.0253411 Jy ! Total flux subtracted in 200 components = 0.0253411 Jy ! Clean residual min=-0.147743 max=0.063162 Jy/beam ! Clean residual mean=-0.028922 rms=0.017507 Jy/beam ! Combined flux in latest and established models = 2.88045 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 2.88045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.455977Jy sigma=2.268560 ! Fit after self-cal, rms=1.453085Jy sigma=2.257906 wmodel /d2/scr/pima/rv101_uvs/J0339-0146_S_map.mod ! Writing 53 model components to file: /d2/scr/pima/rv101_uvs/J0339-0146_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0339-0146_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0339-0146_S_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0339-0146_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0597817 Jy ! Component: 100 - total flux cleaned = -0.110421 Jy ! Component: 150 - total flux cleaned = -0.155082 Jy ! Component: 200 - total flux cleaned = -0.19592 Jy ! Component: 250 - total flux cleaned = -0.234033 Jy ! Component: 300 - total flux cleaned = -0.2684 Jy ! Component: 350 - total flux cleaned = -0.294173 Jy ! Component: 400 - total flux cleaned = -0.319985 Jy ! Component: 450 - total flux cleaned = -0.344683 Jy ! Component: 500 - total flux cleaned = -0.369553 Jy ! Component: 550 - total flux cleaned = -0.392319 Jy ! Component: 600 - total flux cleaned = -0.415417 Jy ! Component: 650 - total flux cleaned = -0.436738 Jy ! Component: 700 - total flux cleaned = -0.454361 Jy ! Component: 750 - total flux cleaned = -0.470531 Jy ! Component: 800 - total flux cleaned = -0.486314 Jy ! Component: 850 - total flux cleaned = -0.502687 Jy ! Component: 900 - total flux cleaned = -0.514938 Jy ! Component: 950 - total flux cleaned = -0.52788 Jy ! Component: 1000 - total flux cleaned = -0.541465 Jy ! Component: 1050 - total flux cleaned = -0.553894 Jy ! Component: 1100 - total flux cleaned = -0.56608 Jy ! Component: 1150 - total flux cleaned = -0.577192 Jy ! Component: 1200 - total flux cleaned = -0.588106 Jy ! Component: 1250 - total flux cleaned = -0.599651 Jy ! Component: 1300 - total flux cleaned = -0.6102 Jy ! Component: 1350 - total flux cleaned = -0.620582 Jy ! Component: 1400 - total flux cleaned = -0.630011 Jy ! Component: 1450 - total flux cleaned = -0.638525 Jy ! Component: 1500 - total flux cleaned = -0.647675 Jy ! Component: 1550 - total flux cleaned = -0.655939 Jy ! Component: 1600 - total flux cleaned = -0.663351 Jy ! Component: 1650 - total flux cleaned = -0.672118 Jy ! Component: 1700 - total flux cleaned = -0.679323 Jy ! Component: 1750 - total flux cleaned = -0.686434 Jy ! Component: 1800 - total flux cleaned = -0.694148 Jy ! Component: 1850 - total flux cleaned = -0.701074 Jy ! Component: 1900 - total flux cleaned = -0.70791 Jy ! Component: 1950 - total flux cleaned = -0.714657 Jy ! Component: 2000 - total flux cleaned = -0.721315 Jy ! Component: 2050 - total flux cleaned = -0.725925 Jy ! Component: 2100 - total flux cleaned = -0.731143 Jy ! Component: 2150 - total flux cleaned = -0.736303 Jy ! Component: 2200 - total flux cleaned = -0.741406 Jy ! Component: 2250 - total flux cleaned = -0.747711 Jy ! Component: 2300 - total flux cleaned = -0.752696 Jy ! Component: 2350 - total flux cleaned = -0.758241 Jy ! Component: 2400 - total flux cleaned = -0.762514 Jy ! Component: 2450 - total flux cleaned = -0.767347 Jy ! Component: 2500 - total flux cleaned = -0.772131 Jy ! Component: 2550 - total flux cleaned = -0.776273 Jy ! Component: 2600 - total flux cleaned = -0.780374 Jy ! Component: 2650 - total flux cleaned = -0.783857 Jy ! Component: 2700 - total flux cleaned = -0.788457 Jy ! Component: 2750 - total flux cleaned = -0.792443 Jy ! Component: 2800 - total flux cleaned = -0.795831 Jy ! Component: 2850 - total flux cleaned = -0.798631 Jy ! Component: 2900 - total flux cleaned = -0.801961 Jy ! Component: 2950 - total flux cleaned = -0.805807 Jy ! Component: 3000 - total flux cleaned = -0.807988 Jy ! Component: 3050 - total flux cleaned = -0.811235 Jy ! Component: 3100 - total flux cleaned = -0.814454 Jy ! Component: 3150 - total flux cleaned = -0.817649 Jy ! Component: 3200 - total flux cleaned = -0.819758 Jy ! Component: 3250 - total flux cleaned = -0.82238 Jy ! Component: 3300 - total flux cleaned = -0.824979 Jy ! Component: 3350 - total flux cleaned = -0.82653 Jy ! Component: 3400 - total flux cleaned = -0.829093 Jy ! Component: 3450 - total flux cleaned = -0.831639 Jy ! Component: 3500 - total flux cleaned = -0.834165 Jy ! Component: 3550 - total flux cleaned = -0.836671 Jy ! Component: 3600 - total flux cleaned = -0.838661 Jy ! Component: 3650 - total flux cleaned = -0.84064 Jy ! Component: 3700 - total flux cleaned = -0.842606 Jy ! Component: 3750 - total flux cleaned = -0.844073 Jy ! Component: 3800 - total flux cleaned = -0.846016 Jy ! Component: 3850 - total flux cleaned = -0.847947 Jy ! Component: 3900 - total flux cleaned = -0.849383 Jy ! Component: 3950 - total flux cleaned = -0.851289 Jy ! Component: 4000 - total flux cleaned = -0.853185 Jy ! Component: 4050 - total flux cleaned = -0.854127 Jy ! Total flux subtracted in 4096 components = -0.855531 Jy ! Clean residual min=-0.028550 max=0.024898 Jy/beam ! Clean residual mean=-0.002514 rms=0.008519 Jy/beam ! Combined flux in latest and established models = 2.02492 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 352 components and 2.02492 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0339-0146_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 8.227 at -17.2 degrees (North through East) ! Clean map min=-0.09528 max=1.9809 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0339-0146_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.98089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00847173 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28302 1.28302 2.56604 5.13208 10.2642 20.5283 41.0567 82.1133 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0254 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.98 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 233.823 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0339-0146_S_uvs.log closed on Sat Nov 29 13:49:49 2014