! Started logfile: /d2/scr/pima/rv101_uvs/J0231+1322_X_uvs.log on Sat Nov 29 16:28:44 2014 obs /d2/scr/pima/rv101_uvs/J0231+1322_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0231+1322_X_uva.fits ! AN table 1: 132 integrations on 3 of 3 possible baselines. ! AN table 2: 11 integrations on 10 of 10 possible baselines. ! AN table 3: 9 integrations on 3 of 3 possible baselines. ! AN table 4: 52 integrations on 6 of 6 possible baselines. ! AN table 5: 11 integrations on 21 of 21 possible baselines. ! AN table 6: 18 integrations on 28 of 28 possible baselines. ! AN table 7: 11 integrations on 15 of 15 possible baselines. ! AN table 8: 12 integrations on 10 of 10 possible baselines. ! AN table 9: 11 integrations on 55 of 55 possible baselines. ! AN table 10: 9 integrations on 1 of 1 possible baselines. ! AN table 11: 9 integrations on 1 of 1 possible baselines. ! AN table 12: 9 integrations on 45 of 45 possible baselines. ! AN table 13: 9 integrations on 21 of 21 possible baselines. ! AN table 14: 9 integrations on 15 of 15 possible baselines. ! AN table 15: 9 integrations on 10 of 10 possible baselines. ! AN table 16: 5 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.853563 visibilities/baseline/integration-bin. ! Found source: J0231+1322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 11308 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0231+1322_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 45 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! A total of 51 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 21 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! A total of 17 telescope corrections were flagged in sub-array 15. ! A total of 10 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 85 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 45 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 22 telescope corrections were flagged in sub-array 8. ! A total of 51 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 21 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! A total of 17 telescope corrections were flagged in sub-array 15. ! A total of 10 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 3. ! A total of 396 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 130 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 55 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 32 telescope corrections were flagged in sub-array 8. ! A total of 58 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 21 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! A total of 17 telescope corrections were flagged in sub-array 15. ! A total of 10 telescope corrections were flagged in sub-array 16. ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! A total of 24 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 130 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 55 telescope corrections were flagged in sub-array 6. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 32 telescope corrections were flagged in sub-array 8. ! A total of 58 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! A total of 18 telescope corrections were flagged in sub-array 11. ! A total of 18 telescope corrections were flagged in sub-array 12. ! A total of 21 telescope corrections were flagged in sub-array 13. ! A total of 19 telescope corrections were flagged in sub-array 14. ! A total of 17 telescope corrections were flagged in sub-array 15. ! A total of 10 telescope corrections were flagged in sub-array 16. ! ! Fit before self-cal, rms=1.688488Jy sigma=16.428602 ! Fit after self-cal, rms=0.674776Jy sigma=6.254319 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5905 mas, bmaj=1.557 mas, bpa=-9.876 degrees ! Estimated noise=1.11171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.806109 Jy ! Component: 100 - total flux cleaned = 1.1638 Jy ! Total flux subtracted in 100 components = 1.1638 Jy ! Clean residual min=-0.052553 max=0.171496 Jy/beam ! Clean residual mean=0.000385 rms=0.012813 Jy/beam ! Combined flux in latest and established models = 1.1638 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.1638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507113Jy sigma=4.264508 ! Fit after self-cal, rms=0.497331Jy sigma=4.188343 ! Inverting map ! Added new window around map position (-0.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210754 Jy ! Component: 100 - total flux cleaned = 0.325894 Jy ! Total flux subtracted in 100 components = 0.325894 Jy ! Clean residual min=-0.029533 max=0.093403 Jy/beam ! Clean residual mean=0.000074 rms=0.007358 Jy/beam ! Combined flux in latest and established models = 1.48969 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 1.48969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355897Jy sigma=2.683292 ! Fit after self-cal, rms=0.348263Jy sigma=2.604017 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869604 Jy ! Component: 100 - total flux cleaned = 0.135715 Jy ! Total flux subtracted in 100 components = 0.135715 Jy ! Clean residual min=-0.024489 max=0.046951 Jy/beam ! Clean residual mean=-0.000057 rms=0.005580 Jy/beam ! Combined flux in latest and established models = 1.62541 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 1.62541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317187Jy sigma=2.271443 ! Fit after self-cal, rms=0.315343Jy sigma=2.251894 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396486 Jy ! Component: 100 - total flux cleaned = 0.0634583 Jy ! Total flux subtracted in 100 components = 0.0634583 Jy ! Clean residual min=-0.024417 max=0.027786 Jy/beam ! Clean residual mean=-0.000118 rms=0.005157 Jy/beam ! Combined flux in latest and established models = 1.68886 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 1.68886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308419Jy sigma=2.192927 ! Fit after self-cal, rms=0.307946Jy sigma=2.188829 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6743 mas, bmaj=1.707 mas, bpa=-11.23 degrees ! Estimated noise=0.940866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089599 Jy ! Component: 100 - total flux cleaned = 0.0129205 Jy ! Component: 150 - total flux cleaned = 0.0153108 Jy ! Component: 200 - total flux cleaned = 0.0166597 Jy ! Total flux subtracted in 200 components = 0.0166597 Jy ! Clean residual min=-0.032135 max=0.024070 Jy/beam ! Clean residual mean=-0.000544 rms=0.006375 Jy/beam ! Combined flux in latest and established models = 1.70552 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 1.70552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305525Jy sigma=2.178329 ! Fit after self-cal, rms=0.305267Jy sigma=2.176668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6743 x 1.707 at -11.23 degrees (North through East) ! Clean map min=-0.034416 max=1.0337 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 243 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* OV 1.00* ! PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.08 KP 1.00* LA 1.07 MK 1.00 ! OV 0.94 PT 1.00 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! MK 0.00* NY 0.00* ! ! ! Correcting IF 2. ! A total of 243 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.99 HN 1.03 KP 1.00* LA 0.96 ! MK 1.07 NL 0.98 NY 1.02 OV 0.94 ! PT 0.91 SC 1.08 WF 0.86 ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.99 HN 1.10 KP 1.00* LA 0.97 ! MK 1.04 NL 0.96 OV 0.94 PT 0.88 ! SC 1.03 WF 0.88 ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.07 KP 1.00* LA 1.01 MK 1.01 ! OV 0.94 PT 0.91 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! MK 0.00* NY 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 HN 1.02 LA 1.07 MA 1.05 ! NL 1.03 NY 1.00* ON 0.90 PT 0.97 ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.03 MA 1.00 NL 0.99 NY 1.00* ! ON 1.02 SC 1.06 ! ! Telescope amplitude corrections in sub-array 8: ! HN 1.04 MA 0.92 NL 1.05 NY 1.00* ! ON 1.05 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.01 HN 1.08 KP 1.00* LA 1.04 ! MK 1.08 NL 1.02 NY 1.00* OV 1.04 ! PT 0.89 SC 1.05 WF 0.87 ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 0.99 HN 1.13 KP 1.00* LA 1.05 ! MK 1.06 NL 1.01 OV 1.01 PT 0.90 ! SC 1.05 WF 0.88 ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.09 KP 1.00* LA 1.11 MK 0.99 ! OV 1.00 PT 0.91 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! MK 0.00* NY 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* NY 0.00* SC 0.00* ! ! A total of 78 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 HN 1.06 LA 1.08 MA 1.03 ! NL 1.06 NY 1.00* ON 1.07 PT 1.00 ! ! Telescope amplitude corrections in sub-array 7: ! HN 1.01 MA 0.95 NL 1.04 NY 1.00* ! ON 1.15 SC 1.08 ! ! Telescope amplitude corrections in sub-array 8: ! HN 0.96 MA 1.07 NL 1.14 NY 1.00* ! ON 1.13 ! ! Telescope amplitude corrections in sub-array 9: ! FD 1.01 HN 1.06 KP 1.00* LA 1.01 ! MK 1.12 NL 1.05 NY 1.00* OV 0.99 ! PT 0.92 SC 1.10 WF 1.01 ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! OV 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! FD 1.03 HN 1.11 KP 1.00* LA 1.02 ! MK 1.14 NL 1.03 OV 0.99 PT 0.91 ! SC 1.07 WF 0.99 ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.11 KP 1.00* LA 1.08 MK 1.06 ! OV 0.99 PT 0.95 ! ! Telescope amplitude corrections in sub-array 15: ! KP 1.00* LA 1.00* MK 1.00* OV 1.00* ! PT 1.00* ! ! Telescope amplitude corrections in sub-array 16: ! MK 0.00* NY 0.00* ! ! ! Fit before self-cal, rms=0.305267Jy sigma=2.176668 ! Fit after self-cal, rms=0.281034Jy sigma=2.019461 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6722 mas, bmaj=1.73 mas, bpa=-10.54 degrees ! Estimated noise=0.965335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.010611 Jy ! Component: 100 - total flux cleaned = -0.0127758 Jy ! Component: 150 - total flux cleaned = -0.0138957 Jy ! Component: 200 - total flux cleaned = -0.0143966 Jy ! Total flux subtracted in 200 components = -0.0143966 Jy ! Clean residual min=-0.030044 max=0.021985 Jy/beam ! Clean residual mean=-0.000504 rms=0.005766 Jy/beam ! Combined flux in latest and established models = 1.69113 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 1.69113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279862Jy sigma=2.008296 ! Fit after self-cal, rms=0.279754Jy sigma=2.006800 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279754Jy sigma=2.006800 ! Fit after self-cal, rms=0.279476Jy sigma=2.004861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.673 mas, bmaj=1.732 mas, bpa=-10.6 degrees ! Estimated noise=0.962869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00665114 Jy ! Component: 100 - total flux cleaned = -0.00769007 Jy ! Component: 150 - total flux cleaned = -0.00791376 Jy ! Component: 200 - total flux cleaned = -0.00812903 Jy ! Total flux subtracted in 200 components = -0.00812903 Jy ! Clean residual min=-0.030305 max=0.022175 Jy/beam ! Clean residual mean=-0.000499 rms=0.005701 Jy/beam ! Combined flux in latest and established models = 1.683 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 1.683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278847Jy sigma=2.000499 ! Fit after self-cal, rms=0.278818Jy sigma=1.999937 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000918421 Jy ! Component: 100 - total flux cleaned = -0.00110995 Jy ! Component: 150 - total flux cleaned = -0.00129374 Jy ! Component: 200 - total flux cleaned = -0.00146334 Jy ! Total flux subtracted in 200 components = -0.00146334 Jy ! Clean residual min=-0.029990 max=0.022367 Jy/beam ! Clean residual mean=-0.000491 rms=0.005689 Jy/beam ! Combined flux in latest and established models = 1.68153 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 1.68153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278414Jy sigma=1.998464 ! Fit after self-cal, rms=0.278400Jy sigma=1.998303 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278400Jy sigma=1.998303 ! Fit after self-cal, rms=0.278269Jy sigma=1.997260 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6734 mas, bmaj=1.733 mas, bpa=-10.67 degrees ! Estimated noise=0.961112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00393515 Jy ! Component: 100 - total flux cleaned = -0.00429672 Jy ! Component: 150 - total flux cleaned = -0.00446923 Jy ! Component: 200 - total flux cleaned = -0.0047838 Jy ! Total flux subtracted in 200 components = -0.0047838 Jy ! Clean residual min=-0.029962 max=0.022461 Jy/beam ! Clean residual mean=-0.000490 rms=0.005657 Jy/beam ! Combined flux in latest and established models = 1.67675 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 1.67675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277923Jy sigma=1.995529 ! Fit after self-cal, rms=0.277919Jy sigma=1.995357 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003361 Jy ! Component: 100 - total flux cleaned = -0.000650192 Jy ! Component: 150 - total flux cleaned = -0.000798486 Jy ! Component: 200 - total flux cleaned = -0.00109797 Jy ! Total flux subtracted in 200 components = -0.00109797 Jy ! Clean residual min=-0.029549 max=0.022528 Jy/beam ! Clean residual mean=-0.000484 rms=0.005650 Jy/beam ! Combined flux in latest and established models = 1.67565 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 1.67565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277642Jy sigma=1.994407 ! Fit after self-cal, rms=0.277639Jy sigma=1.994342 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277639Jy sigma=1.994342 ! Fit after self-cal, rms=0.277573Jy sigma=1.994033 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=2.951 mas, bpa=-29.13 degrees ! Estimated noise=1.40616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.020446 Jy ! Component: 100 - total flux cleaned = -0.0217759 Jy ! Component: 150 - total flux cleaned = -0.022904 Jy ! Component: 200 - total flux cleaned = -0.0235872 Jy ! Total flux subtracted in 200 components = -0.0235872 Jy ! Clean residual min=-0.046758 max=0.035958 Jy/beam ! Clean residual mean=-0.001054 rms=0.011777 Jy/beam ! Combined flux in latest and established models = 1.65207 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 1.65207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277189Jy sigma=2.021969 ! Fit after self-cal, rms=0.277129Jy sigma=2.018089 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140293 Jy ! Component: 100 - total flux cleaned = -0.00242287 Jy ! Component: 150 - total flux cleaned = -0.00269936 Jy ! Component: 200 - total flux cleaned = -0.00321585 Jy ! Total flux subtracted in 200 components = -0.00321585 Jy ! Clean residual min=-0.046204 max=0.036242 Jy/beam ! Clean residual mean=-0.001018 rms=0.011734 Jy/beam ! Combined flux in latest and established models = 1.64885 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 1.64885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277469Jy sigma=2.036680 ! Fit after self-cal, rms=0.277442Jy sigma=2.034835 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6735 mas, bmaj=1.734 mas, bpa=-10.7 degrees ! Estimated noise=0.96001 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6735 x 1.734 at -10.7 degrees (North through East) ! Clean map min=-0.027636 max=1.0271 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277442Jy sigma=2.034835 ! Fit after self-cal, rms=0.273866Jy sigma=1.973379 ! Inverting map and beam ! Estimated beam: bmin=0.6744 mas, bmaj=1.739 mas, bpa=-10.78 degrees ! Estimated noise=0.96095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790492 Jy ! Component: 100 - total flux cleaned = 0.00932871 Jy ! Component: 150 - total flux cleaned = 0.00909271 Jy ! Component: 200 - total flux cleaned = 0.00909199 Jy ! Total flux subtracted in 200 components = 0.00909199 Jy ! Clean residual min=-0.033202 max=0.021227 Jy/beam ! Clean residual mean=-0.000425 rms=0.005471 Jy/beam ! Combined flux in latest and established models = 1.65794 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 1.65794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273579Jy sigma=1.954263 ! Fit after self-cal, rms=0.273421Jy sigma=1.953277 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958551 Jy ! Component: 100 - total flux cleaned = 0.000958418 Jy ! Component: 150 - total flux cleaned = 0.000619577 Jy ! Component: 200 - total flux cleaned = 0.000617916 Jy ! Total flux subtracted in 200 components = 0.000617916 Jy ! Clean residual min=-0.031511 max=0.021249 Jy/beam ! Clean residual mean=-0.000426 rms=0.005454 Jy/beam ! Combined flux in latest and established models = 1.65856 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 1.65856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273358Jy sigma=1.948931 ! Fit after self-cal, rms=0.273338Jy sigma=1.948810 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273338Jy sigma=1.948810 ! Fit after self-cal, rms=0.272669Jy sigma=1.944253 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.59 mas, bmaj=1.573 mas, bpa=-9.56 degrees ! Estimated noise=1.14693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.808777 Jy ! Component: 100 - total flux cleaned = 1.19569 Jy ! Component: 150 - total flux cleaned = 1.3989 Jy ! Component: 200 - total flux cleaned = 1.50734 Jy ! Total flux subtracted in 200 components = 1.50734 Jy ! Clean residual min=-0.027132 max=0.053978 Jy/beam ! Clean residual mean=0.000069 rms=0.005737 Jy/beam ! Combined flux in latest and established models = 1.50734 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.50734 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6736 mas, bmaj=1.737 mas, bpa=-10.77 degrees ! Estimated noise=0.958235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771562 Jy ! Component: 100 - total flux cleaned = 0.118543 Jy ! Component: 150 - total flux cleaned = 0.141875 Jy ! Component: 200 - total flux cleaned = 0.145963 Jy ! Total flux subtracted in 200 components = 0.145963 Jy ! Clean residual min=-0.031530 max=0.020970 Jy/beam ! Clean residual mean=-0.000415 rms=0.005529 Jy/beam ! Combined flux in latest and established models = 1.6533 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 1.6533 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=2.959 mas, bpa=-29.22 degrees ! Estimated noise=1.40142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00436119 Jy ! Component: 100 - total flux cleaned = -0.00583215 Jy ! Component: 150 - total flux cleaned = -0.00702864 Jy ! Component: 200 - total flux cleaned = -0.00754732 Jy ! Total flux subtracted in 200 components = -0.00754732 Jy ! Clean residual min=-0.043135 max=0.033041 Jy/beam ! Clean residual mean=-0.001052 rms=0.011256 Jy/beam ! Combined flux in latest and established models = 1.64575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000889922 Jy ! Component: 100 - total flux cleaned = -0.00170493 Jy ! Component: 150 - total flux cleaned = -0.00211733 Jy ! Component: 200 - total flux cleaned = -0.0028334 Jy ! Total flux subtracted in 200 components = -0.0028334 Jy ! Clean residual min=-0.043099 max=0.033186 Jy/beam ! Clean residual mean=-0.001013 rms=0.011204 Jy/beam ! Combined flux in latest and established models = 1.64292 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 1.64292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6736 mas, bmaj=1.737 mas, bpa=-10.77 degrees ! Estimated noise=0.958235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158128 Jy ! Component: 100 - total flux cleaned = 0.0168795 Jy ! Component: 150 - total flux cleaned = 0.0177527 Jy ! Component: 200 - total flux cleaned = 0.0173784 Jy ! Total flux subtracted in 200 components = 0.0173784 Jy ! Clean residual min=-0.034627 max=0.021112 Jy/beam ! Clean residual mean=-0.000450 rms=0.005481 Jy/beam ! Combined flux in latest and established models = 1.6603 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 1.6603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274341Jy sigma=1.964204 ! Fit after self-cal, rms=0.274240Jy sigma=1.961684 wmodel /d2/scr/pima/rv101_uvs/J0231+1322_X_map.mod ! Writing 36 model components to file: /d2/scr/pima/rv101_uvs/J0231+1322_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0231+1322_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0231+1322_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0231+1322_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0231+1322_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0134696 Jy ! Component: 100 - total flux cleaned = -0.0235062 Jy ! Component: 150 - total flux cleaned = -0.0299329 Jy ! Component: 200 - total flux cleaned = -0.0360684 Jy ! Component: 250 - total flux cleaned = -0.0404963 Jy ! Component: 300 - total flux cleaned = -0.0444359 Jy ! Component: 350 - total flux cleaned = -0.0486194 Jy ! Component: 400 - total flux cleaned = -0.0523596 Jy ! Component: 450 - total flux cleaned = -0.055024 Jy ! Component: 500 - total flux cleaned = -0.0579662 Jy ! Component: 550 - total flux cleaned = -0.0605363 Jy ! Component: 600 - total flux cleaned = -0.0633761 Jy ! Component: 650 - total flux cleaned = -0.0661662 Jy ! Component: 700 - total flux cleaned = -0.0679968 Jy ! Component: 750 - total flux cleaned = -0.0692047 Jy ! Component: 800 - total flux cleaned = -0.0709912 Jy ! Component: 850 - total flux cleaned = -0.0727541 Jy ! Component: 900 - total flux cleaned = -0.0744914 Jy ! Component: 950 - total flux cleaned = -0.0753469 Jy ! Component: 1000 - total flux cleaned = -0.0767544 Jy ! Component: 1050 - total flux cleaned = -0.0778627 Jy ! Component: 1100 - total flux cleaned = -0.0784095 Jy ! Component: 1150 - total flux cleaned = -0.079498 Jy ! Component: 1200 - total flux cleaned = -0.0800356 Jy ! Component: 1250 - total flux cleaned = -0.0811022 Jy ! Component: 1300 - total flux cleaned = -0.0811028 Jy ! Component: 1350 - total flux cleaned = -0.0818884 Jy ! Component: 1400 - total flux cleaned = -0.0826656 Jy ! Component: 1450 - total flux cleaned = -0.0834272 Jy ! Component: 1500 - total flux cleaned = -0.0836782 Jy ! Component: 1550 - total flux cleaned = -0.0836803 Jy ! Component: 1600 - total flux cleaned = -0.0839301 Jy ! Component: 1650 - total flux cleaned = -0.0844205 Jy ! Component: 1700 - total flux cleaned = -0.0851468 Jy ! Component: 1750 - total flux cleaned = -0.0849037 Jy ! Component: 1800 - total flux cleaned = -0.0851451 Jy ! Component: 1850 - total flux cleaned = -0.0851454 Jy ! Component: 1900 - total flux cleaned = -0.0851452 Jy ! Component: 1950 - total flux cleaned = -0.0856155 Jy ! Component: 2000 - total flux cleaned = -0.0860791 Jy ! Component: 2050 - total flux cleaned = -0.0865402 Jy ! Component: 2100 - total flux cleaned = -0.0869956 Jy ! Component: 2150 - total flux cleaned = -0.0876721 Jy ! Component: 2200 - total flux cleaned = -0.0876722 Jy ! Component: 2250 - total flux cleaned = -0.0883381 Jy ! Component: 2300 - total flux cleaned = -0.0887791 Jy ! Component: 2350 - total flux cleaned = -0.0892151 Jy ! Component: 2400 - total flux cleaned = -0.089869 Jy ! Component: 2450 - total flux cleaned = -0.0896502 Jy ! Component: 2500 - total flux cleaned = -0.0898663 Jy ! Component: 2550 - total flux cleaned = -0.0905081 Jy ! Component: 2600 - total flux cleaned = -0.0907215 Jy ! Component: 2650 - total flux cleaned = -0.0913517 Jy ! Component: 2700 - total flux cleaned = -0.0915597 Jy ! Component: 2750 - total flux cleaned = -0.0917683 Jy ! Component: 2800 - total flux cleaned = -0.0919756 Jy ! Component: 2850 - total flux cleaned = -0.092591 Jy ! Component: 2900 - total flux cleaned = -0.0925904 Jy ! Component: 2950 - total flux cleaned = -0.0931985 Jy ! Component: 3000 - total flux cleaned = -0.0925962 Jy ! Component: 3050 - total flux cleaned = -0.0929959 Jy ! Component: 3100 - total flux cleaned = -0.0935909 Jy ! Component: 3150 - total flux cleaned = -0.093394 Jy ! Component: 3200 - total flux cleaned = -0.0941817 Jy ! Component: 3250 - total flux cleaned = -0.0937913 Jy ! Component: 3300 - total flux cleaned = -0.0949591 Jy ! Component: 3350 - total flux cleaned = -0.0949582 Jy ! Component: 3400 - total flux cleaned = -0.0943806 Jy ! Component: 3450 - total flux cleaned = -0.0949548 Jy ! Component: 3500 - total flux cleaned = -0.0943845 Jy ! Component: 3550 - total flux cleaned = -0.0949523 Jy ! Component: 3600 - total flux cleaned = -0.095141 Jy ! Component: 3650 - total flux cleaned = -0.0957014 Jy ! Component: 3700 - total flux cleaned = -0.0955149 Jy ! Component: 3750 - total flux cleaned = -0.0958852 Jy ! Component: 3800 - total flux cleaned = -0.0960706 Jy ! Component: 3850 - total flux cleaned = -0.0964362 Jy ! Component: 3900 - total flux cleaned = -0.096801 Jy ! Component: 3950 - total flux cleaned = -0.0978886 Jy ! Component: 4000 - total flux cleaned = -0.097708 Jy ! Component: 4050 - total flux cleaned = -0.0986041 Jy ! Total flux subtracted in 4096 components = -0.0982449 Jy ! Clean residual min=-0.011922 max=0.011717 Jy/beam ! Clean residual mean=-0.000194 rms=0.003343 Jy/beam ! Combined flux in latest and established models = 1.56205 Jy keep ! Adding 372 model components to the UV plane model. ! The established model now contains 408 components and 1.56206 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0231+1322_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6736 x 1.737 at -10.77 degrees (North through East) ! Clean map min=-0.020372 max=1.0294 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0231+1322_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.02939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00332426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.968808 0.968808 1.93762 3.87523 7.75046 15.5009 31.0019 62.0037 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0099 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 309.658 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0231+1322_X_uvs.log closed on Sat Nov 29 16:28:49 2014