! Started logfile: /d2/scr/pima/rv101_uvs/J0151-1732_X_uvs.log on Sat Nov 29 16:28:29 2014 obs /d2/scr/pima/rv101_uvs/J0151-1732_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_X_uva.fits ! AN table 1: 174 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.947478 visibilities/baseline/integration-bin. ! Found source: J0151-1732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 23740 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0151-1732_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.086118Jy sigma=18.140500 ! Fit after self-cal, rms=0.658225Jy sigma=10.752445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6084 mas, bmaj=1.695 mas, bpa=-3.168 degrees ! Estimated noise=0.674912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268372 Jy ! Component: 100 - total flux cleaned = 0.328997 Jy ! Total flux subtracted in 100 components = 0.328997 Jy ! Clean residual min=-0.010397 max=0.021789 Jy/beam ! Clean residual mean=-0.000013 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 0.328997 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.328997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126931Jy sigma=1.956826 ! Fit after self-cal, rms=0.126937Jy sigma=1.956604 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225434 Jy ! Component: 100 - total flux cleaned = 0.0330506 Jy ! Total flux subtracted in 100 components = 0.0330506 Jy ! Clean residual min=-0.007847 max=0.007922 Jy/beam ! Clean residual mean=-0.000003 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.362047 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.362047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122231Jy sigma=1.852511 ! Fit after self-cal, rms=0.122226Jy sigma=1.852116 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7634 mas, bmaj=2.079 mas, bpa=-4.327 degrees ! Estimated noise=0.327456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106176 Jy ! Component: 100 - total flux cleaned = 0.0156366 Jy ! Component: 150 - total flux cleaned = 0.0182633 Jy ! Component: 200 - total flux cleaned = 0.0196522 Jy ! Total flux subtracted in 200 components = 0.0196522 Jy ! Clean residual min=-0.008851 max=0.007190 Jy/beam ! Clean residual mean=0.000000 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.3817 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.3817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121647Jy sigma=1.833186 ! Fit after self-cal, rms=0.121661Jy sigma=1.833122 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7634 x 2.079 at -4.327 degrees (North through East) ! Clean map min=-0.0083927 max=0.35335 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.06 KP 1.00* LA 1.03 ! MK 0.98 NL 0.96 OV 0.96 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.06 KP 1.00* LA 0.99 ! MK 1.00 NL 0.97 OV 0.94 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.11 KP 1.00* LA 1.07 ! MK 0.99 NL 1.02 OV 1.01 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.13 KP 1.00* LA 1.04 ! MK 1.02 NL 1.04 OV 1.00 PT 0.93 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.121661Jy sigma=1.833122 ! Fit after self-cal, rms=0.122570Jy sigma=1.797565 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7653 mas, bmaj=2.076 mas, bpa=-4.176 degrees ! Estimated noise=0.326964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000612067 Jy ! Component: 100 - total flux cleaned = -0.000642356 Jy ! Component: 150 - total flux cleaned = -0.000687985 Jy ! Component: 200 - total flux cleaned = -0.000725154 Jy ! Total flux subtracted in 200 components = -0.000725154 Jy ! Clean residual min=-0.003089 max=0.003508 Jy/beam ! Clean residual mean=-0.000000 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.380974 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 29 components and 0.380974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122555Jy sigma=1.797401 ! Fit after self-cal, rms=0.122621Jy sigma=1.797189 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122621Jy sigma=1.797189 ! Fit after self-cal, rms=0.123616Jy sigma=1.792343 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7656 mas, bmaj=2.08 mas, bpa=-4.184 degrees ! Estimated noise=0.327106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104862 Jy ! Component: 100 - total flux cleaned = -0.000160083 Jy ! Component: 150 - total flux cleaned = -0.000183386 Jy ! Component: 200 - total flux cleaned = -0.000204128 Jy ! Total flux subtracted in 200 components = -0.000204128 Jy ! Clean residual min=-0.002672 max=0.002973 Jy/beam ! Clean residual mean=-0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.38077 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.38077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123613Jy sigma=1.792300 ! Fit after self-cal, rms=0.123638Jy sigma=1.792270 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.2, -37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270975 Jy ! Component: 100 - total flux cleaned = 0.0032601 Jy ! Component: 150 - total flux cleaned = 0.0032947 Jy ! Component: 200 - total flux cleaned = 0.00335287 Jy ! Total flux subtracted in 200 components = 0.00335287 Jy ! Clean residual min=-0.002558 max=0.002392 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.384123 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.384123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123575Jy sigma=1.791375 ! Fit after self-cal, rms=0.123568Jy sigma=1.791260 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123568Jy sigma=1.791260 ! Fit after self-cal, rms=0.123596Jy sigma=1.791115 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7657 mas, bmaj=2.08 mas, bpa=-4.182 degrees ! Estimated noise=0.326972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104322 Jy ! Component: 100 - total flux cleaned = 0.00112455 Jy ! Component: 150 - total flux cleaned = 0.00114815 Jy ! Component: 200 - total flux cleaned = 0.00119243 Jy ! Total flux subtracted in 200 components = 0.00119243 Jy ! Clean residual min=-0.002490 max=0.002222 Jy/beam ! Clean residual mean=-0.000001 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.385316 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.385315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123582Jy sigma=1.790925 ! Fit after self-cal, rms=0.123583Jy sigma=1.790911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281204 Jy ! Component: 100 - total flux cleaned = 0.000338641 Jy ! Component: 150 - total flux cleaned = 0.000391784 Jy ! Component: 200 - total flux cleaned = 0.00042494 Jy ! Total flux subtracted in 200 components = 0.00042494 Jy ! Clean residual min=-0.002470 max=0.002268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.38574 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.38574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123577Jy sigma=1.790841 ! Fit after self-cal, rms=0.123577Jy sigma=1.790839 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123577Jy sigma=1.790839 ! Fit after self-cal, rms=0.123561Jy sigma=1.790798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.014 mas, bmaj=4.906 mas, bpa=-1.407 degrees ! Estimated noise=0.428688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879073 Jy ! Component: 100 - total flux cleaned = 0.00105631 Jy ! Component: 150 - total flux cleaned = 0.00111049 Jy ! Component: 200 - total flux cleaned = 0.00114222 Jy ! Total flux subtracted in 200 components = 0.00114222 Jy ! Clean residual min=-0.002327 max=0.002184 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.386883 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 0.386883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123564Jy sigma=1.790826 ! Fit after self-cal, rms=0.123563Jy sigma=1.790802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011064 Jy ! Component: 100 - total flux cleaned = 0.000175564 Jy ! Component: 150 - total flux cleaned = 0.000216845 Jy ! Component: 200 - total flux cleaned = 0.000241973 Jy ! Total flux subtracted in 200 components = 0.000241973 Jy ! Clean residual min=-0.002324 max=0.002129 Jy/beam ! Clean residual mean=-0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.387125 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.387125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123566Jy sigma=1.790846 ! Fit after self-cal, rms=0.123565Jy sigma=1.790835 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7657 mas, bmaj=2.08 mas, bpa=-4.178 degrees ! Estimated noise=0.326933 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7657 x 2.08 at -4.178 degrees (North through East) ! Clean map min=-0.0022241 max=0.35286 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6092 mas, bmaj=1.692 mas, bpa=-2.91 degrees ! Estimated noise=0.679667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270119 Jy ! Component: 100 - total flux cleaned = 0.330992 Jy ! Component: 150 - total flux cleaned = 0.353474 Jy ! Component: 200 - total flux cleaned = 0.364372 Jy ! Total flux subtracted in 200 components = 0.364372 Jy ! Clean residual min=-0.005697 max=0.005258 Jy/beam ! Clean residual mean=-0.000005 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.364372 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.364372 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7657 mas, bmaj=2.08 mas, bpa=-4.178 degrees ! Estimated noise=0.326933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828342 Jy ! Component: 100 - total flux cleaned = 0.0127954 Jy ! Component: 150 - total flux cleaned = 0.0157847 Jy ! Component: 200 - total flux cleaned = 0.0178173 Jy ! Total flux subtracted in 200 components = 0.0178173 Jy ! Clean residual min=-0.002649 max=0.002260 Jy/beam ! Clean residual mean=-0.000003 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.382189 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.382189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.014 mas, bmaj=4.906 mas, bpa=-1.407 degrees ! Estimated noise=0.428688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234501 Jy ! Component: 100 - total flux cleaned = 0.00352306 Jy ! Component: 150 - total flux cleaned = 0.00422388 Jy ! Component: 200 - total flux cleaned = 0.0045237 Jy ! Total flux subtracted in 200 components = 0.0045237 Jy ! Clean residual min=-0.002346 max=0.002147 Jy/beam ! Clean residual mean=-0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.386713 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.37014e-05 Jy ! Component: 100 - total flux cleaned = 0.000109918 Jy ! Component: 150 - total flux cleaned = 0.000139808 Jy ! Component: 200 - total flux cleaned = 0.000169269 Jy ! Total flux subtracted in 200 components = 0.000169269 Jy ! Clean residual min=-0.002345 max=0.002125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.386882 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 0.386882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7657 mas, bmaj=2.08 mas, bpa=-4.178 degrees ! Estimated noise=0.326933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000635576 Jy ! Component: 100 - total flux cleaned = -0.000676586 Jy ! Component: 150 - total flux cleaned = -0.000708425 Jy ! Component: 200 - total flux cleaned = -0.000767346 Jy ! Total flux subtracted in 200 components = -0.000767346 Jy ! Clean residual min=-0.002390 max=0.002163 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.386115 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.386115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123566Jy sigma=1.790800 ! Fit after self-cal, rms=0.123563Jy sigma=1.790787 wmodel /d2/scr/pima/rv101_uvs/J0151-1732_X_map.mod ! Writing 64 model components to file: /d2/scr/pima/rv101_uvs/J0151-1732_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0151-1732_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0151-1732_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0151-1732_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101645 Jy ! Component: 100 - total flux cleaned = -0.00154508 Jy ! Component: 150 - total flux cleaned = -0.00177352 Jy ! Component: 200 - total flux cleaned = -0.00188194 Jy ! Component: 250 - total flux cleaned = -0.00195115 Jy ! Component: 300 - total flux cleaned = -0.00201776 Jy ! Component: 350 - total flux cleaned = -0.0021478 Jy ! Component: 400 - total flux cleaned = -0.00221139 Jy ! Component: 450 - total flux cleaned = -0.0023651 Jy ! Component: 500 - total flux cleaned = -0.00233521 Jy ! Component: 550 - total flux cleaned = -0.00242277 Jy ! Component: 600 - total flux cleaned = -0.00233612 Jy ! Component: 650 - total flux cleaned = -0.00230833 Jy ! Component: 700 - total flux cleaned = -0.00233662 Jy ! Component: 750 - total flux cleaned = -0.00225531 Jy ! Component: 800 - total flux cleaned = -0.00228245 Jy ! Component: 850 - total flux cleaned = -0.00228199 Jy ! Component: 900 - total flux cleaned = -0.00230756 Jy ! Component: 950 - total flux cleaned = -0.00228196 Jy ! Component: 1000 - total flux cleaned = -0.00233206 Jy ! Component: 1050 - total flux cleaned = -0.00240571 Jy ! Component: 1100 - total flux cleaned = -0.0024055 Jy ! Component: 1150 - total flux cleaned = -0.00247676 Jy ! Component: 1200 - total flux cleaned = -0.00245295 Jy ! Component: 1250 - total flux cleaned = -0.0024303 Jy ! Component: 1300 - total flux cleaned = -0.0024535 Jy ! Component: 1350 - total flux cleaned = -0.00249827 Jy ! Component: 1400 - total flux cleaned = -0.00252059 Jy ! Component: 1450 - total flux cleaned = -0.00252088 Jy ! Component: 1500 - total flux cleaned = -0.00258564 Jy ! Component: 1550 - total flux cleaned = -0.00264986 Jy ! Component: 1600 - total flux cleaned = -0.00264989 Jy ! Component: 1650 - total flux cleaned = -0.00264981 Jy ! Component: 1700 - total flux cleaned = -0.00262906 Jy ! Component: 1750 - total flux cleaned = -0.00260869 Jy ! Component: 1800 - total flux cleaned = -0.00260856 Jy ! Component: 1850 - total flux cleaned = -0.00258833 Jy ! Component: 1900 - total flux cleaned = -0.0024894 Jy ! Component: 1950 - total flux cleaned = -0.00245057 Jy ! Component: 2000 - total flux cleaned = -0.00233514 Jy ! Component: 2050 - total flux cleaned = -0.00225858 Jy ! Component: 2100 - total flux cleaned = -0.00222081 Jy ! Component: 2150 - total flux cleaned = -0.00210857 Jy ! Component: 2200 - total flux cleaned = -0.00207145 Jy ! Component: 2250 - total flux cleaned = -0.00199826 Jy ! Component: 2300 - total flux cleaned = -0.00187092 Jy ! Component: 2350 - total flux cleaned = -0.00179883 Jy ! Component: 2400 - total flux cleaned = -0.00170968 Jy ! Component: 2450 - total flux cleaned = -0.00165668 Jy ! Component: 2500 - total flux cleaned = -0.0015339 Jy ! Component: 2550 - total flux cleaned = -0.00141235 Jy ! Component: 2600 - total flux cleaned = -0.00134337 Jy ! Component: 2650 - total flux cleaned = -0.00130909 Jy ! Component: 2700 - total flux cleaned = -0.00114002 Jy ! Component: 2750 - total flux cleaned = -0.00112334 Jy ! Component: 2800 - total flux cleaned = -0.00105693 Jy ! Component: 2850 - total flux cleaned = -0.000925337 Jy ! Component: 2900 - total flux cleaned = -0.000892653 Jy ! Component: 2950 - total flux cleaned = -0.000876285 Jy ! Component: 3000 - total flux cleaned = -0.00074755 Jy ! Component: 3050 - total flux cleaned = -0.000731424 Jy ! Component: 3100 - total flux cleaned = -0.000636175 Jy ! Component: 3150 - total flux cleaned = -0.000557533 Jy ! Component: 3200 - total flux cleaned = -0.000416816 Jy ! Component: 3250 - total flux cleaned = -0.00040128 Jy ! Component: 3300 - total flux cleaned = -0.000262534 Jy ! Component: 3350 - total flux cleaned = -0.000186336 Jy ! Component: 3400 - total flux cleaned = -0.000125427 Jy ! Component: 3450 - total flux cleaned = -1.95362e-05 Jy ! Component: 3500 - total flux cleaned = 8.54118e-05 Jy ! Component: 3550 - total flux cleaned = 0.000144937 Jy ! Component: 3600 - total flux cleaned = 0.000219076 Jy ! Component: 3650 - total flux cleaned = 0.000277939 Jy ! Component: 3700 - total flux cleaned = 0.000409575 Jy ! Component: 3750 - total flux cleaned = 0.000496694 Jy ! Component: 3800 - total flux cleaned = 0.000612066 Jy ! Component: 3850 - total flux cleaned = 0.000612033 Jy ! Component: 3900 - total flux cleaned = 0.000712022 Jy ! Component: 3950 - total flux cleaned = 0.000797401 Jy ! Component: 4000 - total flux cleaned = 0.000966727 Jy ! Component: 4050 - total flux cleaned = 0.00100883 Jy ! Total flux subtracted in 4096 components = 0.0010366 Jy ! Clean residual min=-0.000955 max=0.000903 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.387151 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 336 components and 0.387151 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0151-1732_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7657 x 2.08 at -4.178 degrees (North through East) ! Clean map min=-0.0018795 max=0.35269 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352692 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022734 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.193375 0.193375 0.386751 0.773502 1.547 3.09401 6.18801 12.376 24.7521 49.5041 99.0082 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.352 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1551.39 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0151-1732_X_uvs.log closed on Sat Nov 29 16:28:34 2014