! Started logfile: /d2/scr/pima/rv101_uvs/J0151-1732_S_uvs.log on Sat Nov 29 13:48:55 2014 obs /d2/scr/pima/rv101_uvs/J0151-1732_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_S_uva.fits ! AN table 1: 44 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.967172 visibilities/baseline/integration-bin. ! Found source: J0151-1732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6128 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0151-1732_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023526Jy sigma=13.618883 ! Fit after self-cal, rms=0.801573Jy sigma=10.720897 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=7.158 mas, bpa=-5.386 degrees ! Estimated noise=1.32187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153381 Jy ! Component: 100 - total flux cleaned = 0.187145 Jy ! Total flux subtracted in 100 components = 0.187145 Jy ! Clean residual min=-0.006470 max=0.010777 Jy/beam ! Clean residual mean=0.000005 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.187145 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.187145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080506Jy sigma=0.922999 ! Fit after self-cal, rms=0.080499Jy sigma=0.922939 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107557 Jy ! Component: 100 - total flux cleaned = 0.0155592 Jy ! Total flux subtracted in 100 components = 0.0155592 Jy ! Clean residual min=-0.006223 max=0.007225 Jy/beam ! Clean residual mean=0.000005 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.202704 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.202704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078537Jy sigma=0.904209 ! Fit after self-cal, rms=0.078530Jy sigma=0.904066 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=9.198 mas, bpa=-5.995 degrees ! Estimated noise=0.730874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372168 Jy ! Component: 100 - total flux cleaned = 0.00463132 Jy ! Component: 150 - total flux cleaned = 0.00479582 Jy ! Component: 200 - total flux cleaned = 0.00489046 Jy ! Total flux subtracted in 200 components = 0.00489046 Jy ! Clean residual min=-0.005502 max=0.005758 Jy/beam ! Clean residual mean=-0.000000 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.207594 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.207594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078281Jy sigma=0.902644 ! Fit after self-cal, rms=0.078273Jy sigma=0.902593 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 9.198 at -5.995 degrees (North through East) ! Clean map min=-0.0053821 max=0.19798 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.16 KP 1.19 LA 1.06 ! MK 1.01 NL 0.98 OV 1.02 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.04 KP 1.05 LA 0.94 ! MK 0.98 NL 1.05 OV 0.99 PT 1.05 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.078273Jy sigma=0.902593 ! Fit after self-cal, rms=0.078608Jy sigma=0.881832 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=9.137 mas, bpa=-5.912 degrees ! Estimated noise=0.750314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467877 Jy ! Component: 100 - total flux cleaned = 0.00633278 Jy ! Component: 150 - total flux cleaned = 0.00669295 Jy ! Component: 200 - total flux cleaned = 0.00672065 Jy ! Total flux subtracted in 200 components = 0.00672065 Jy ! Clean residual min=-0.004308 max=0.004282 Jy/beam ! Clean residual mean=-0.000002 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.214315 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.214315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078226Jy sigma=0.880365 ! Fit after self-cal, rms=0.078228Jy sigma=0.880276 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078228Jy sigma=0.880276 ! Fit after self-cal, rms=0.075592Jy sigma=0.856825 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=9.138 mas, bpa=-5.725 degrees ! Estimated noise=0.741689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239018 Jy ! Component: 100 - total flux cleaned = -0.00347615 Jy ! Component: 150 - total flux cleaned = -0.00378528 Jy ! Component: 200 - total flux cleaned = -0.00382676 Jy ! Total flux subtracted in 200 components = -0.00382676 Jy ! Clean residual min=-0.003899 max=0.003924 Jy/beam ! Clean residual mean=-0.000001 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.210488 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.210488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075545Jy sigma=0.855220 ! Fit after self-cal, rms=0.075541Jy sigma=0.855168 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105009 Jy ! Component: 100 - total flux cleaned = -0.000106031 Jy ! Component: 150 - total flux cleaned = -0.00010569 Jy ! Component: 200 - total flux cleaned = -0.00012398 Jy ! Total flux subtracted in 200 components = -0.00012398 Jy ! Clean residual min=-0.003931 max=0.003905 Jy/beam ! Clean residual mean=-0.000001 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.210364 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.210364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075534Jy sigma=0.855012 ! Fit after self-cal, rms=0.075531Jy sigma=0.855003 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075531Jy sigma=0.855003 ! Fit after self-cal, rms=0.074980Jy sigma=0.850941 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=9.194 mas, bpa=-5.711 degrees ! Estimated noise=0.734683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235354 Jy ! Component: 100 - total flux cleaned = -0.0034351 Jy ! Component: 150 - total flux cleaned = -0.00354094 Jy ! Component: 200 - total flux cleaned = -0.00362497 Jy ! Total flux subtracted in 200 components = -0.00362497 Jy ! Clean residual min=-0.003777 max=0.003954 Jy/beam ! Clean residual mean=0.000003 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.206739 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.206739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074942Jy sigma=0.849307 ! Fit after self-cal, rms=0.074941Jy sigma=0.849274 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6392e-05 Jy ! Component: 100 - total flux cleaned = -3.37557e-05 Jy ! Component: 150 - total flux cleaned = -1.77639e-05 Jy ! Component: 200 - total flux cleaned = -3.62595e-06 Jy ! Total flux subtracted in 200 components = -3.62595e-06 Jy ! Clean residual min=-0.003753 max=0.003920 Jy/beam ! Clean residual mean=0.000003 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.206736 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.206736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074936Jy sigma=0.849153 ! Fit after self-cal, rms=0.074934Jy sigma=0.849145 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074934Jy sigma=0.849145 ! Fit after self-cal, rms=0.074603Jy sigma=0.848470 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=20.01 mas, bpa=-4.976 degrees ! Estimated noise=0.86354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231162 Jy ! Component: 100 - total flux cleaned = -0.00239828 Jy ! Component: 150 - total flux cleaned = -0.00247144 Jy ! Component: 200 - total flux cleaned = -0.00253193 Jy ! Total flux subtracted in 200 components = -0.00253193 Jy ! Clean residual min=-0.004737 max=0.004435 Jy/beam ! Clean residual mean=0.000010 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.204204 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.204204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074635Jy sigma=0.847788 ! Fit after self-cal, rms=0.074625Jy sigma=0.847660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71892e-06 Jy ! Component: 100 - total flux cleaned = -2.08667e-05 Jy ! Component: 150 - total flux cleaned = -4.45356e-05 Jy ! Component: 200 - total flux cleaned = -8.5967e-05 Jy ! Total flux subtracted in 200 components = -8.5967e-05 Jy ! Clean residual min=-0.004645 max=0.004431 Jy/beam ! Clean residual mean=0.000010 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.204118 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 68 components and 0.204118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074671Jy sigma=0.847985 ! Fit after self-cal, rms=0.074662Jy sigma=0.847851 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=9.228 mas, bpa=-5.688 degrees ! Estimated noise=0.729155 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.208 x 9.228 at -5.688 degrees (North through East) ! Clean map min=-0.0037013 max=0.20122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=7.173 mas, bpa=-5.003 degrees ! Estimated noise=1.32662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15387 Jy ! Component: 100 - total flux cleaned = 0.187493 Jy ! Component: 150 - total flux cleaned = 0.197443 Jy ! Component: 200 - total flux cleaned = 0.201998 Jy ! Total flux subtracted in 200 components = 0.201998 Jy ! Clean residual min=-0.005094 max=0.005160 Jy/beam ! Clean residual mean=0.000000 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.201998 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.201998 Jy ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=9.228 mas, bpa=-5.688 degrees ! Estimated noise=0.729155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212006 Jy ! Component: 100 - total flux cleaned = 0.00234169 Jy ! Component: 150 - total flux cleaned = 0.00240398 Jy ! Component: 200 - total flux cleaned = 0.00240764 Jy ! Total flux subtracted in 200 components = 0.00240764 Jy ! Clean residual min=-0.003753 max=0.003769 Jy/beam ! Clean residual mean=0.000004 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.204405 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.204405 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=20.01 mas, bpa=-4.976 degrees ! Estimated noise=0.86354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587173 Jy ! Component: 100 - total flux cleaned = 0.000483465 Jy ! Component: 150 - total flux cleaned = 0.000399526 Jy ! Component: 200 - total flux cleaned = 0.000360964 Jy ! Total flux subtracted in 200 components = 0.000360964 Jy ! Clean residual min=-0.004897 max=0.004530 Jy/beam ! Clean residual mean=0.000011 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.204766 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.73067e-05 Jy ! Component: 100 - total flux cleaned = -0.000130145 Jy ! Component: 150 - total flux cleaned = -0.000159785 Jy ! Component: 200 - total flux cleaned = -0.000218607 Jy ! Total flux subtracted in 200 components = -0.000218607 Jy ! Clean residual min=-0.004784 max=0.004505 Jy/beam ! Clean residual mean=0.000011 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.204548 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.204548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=9.228 mas, bpa=-5.688 degrees ! Estimated noise=0.729155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117965 Jy ! Component: 100 - total flux cleaned = -0.000253226 Jy ! Component: 150 - total flux cleaned = -0.00028992 Jy ! Component: 200 - total flux cleaned = -0.000261392 Jy ! Total flux subtracted in 200 components = -0.000261392 Jy ! Clean residual min=-0.003772 max=0.003659 Jy/beam ! Clean residual mean=0.000004 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.204286 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.204286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074605Jy sigma=0.847790 ! Fit after self-cal, rms=0.074600Jy sigma=0.847769 wmodel /d2/scr/pima/rv101_uvs/J0151-1732_S_map.mod ! Writing 43 model components to file: /d2/scr/pima/rv101_uvs/J0151-1732_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0151-1732_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0151-1732_S_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J0151-1732_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332521 Jy ! Component: 100 - total flux cleaned = 0.000638142 Jy ! Component: 150 - total flux cleaned = 0.00120626 Jy ! Component: 200 - total flux cleaned = 0.00179605 Jy ! Component: 250 - total flux cleaned = 0.00226027 Jy ! Component: 300 - total flux cleaned = 0.00240928 Jy ! Component: 350 - total flux cleaned = 0.00260206 Jy ! Component: 400 - total flux cleaned = 0.00274118 Jy ! Component: 450 - total flux cleaned = 0.00287531 Jy ! Component: 500 - total flux cleaned = 0.00296294 Jy ! Component: 550 - total flux cleaned = 0.00300644 Jy ! Component: 600 - total flux cleaned = 0.00325515 Jy ! Component: 650 - total flux cleaned = 0.00341769 Jy ! Component: 700 - total flux cleaned = 0.0036554 Jy ! Component: 750 - total flux cleaned = 0.00381038 Jy ! Component: 800 - total flux cleaned = 0.00403706 Jy ! Component: 850 - total flux cleaned = 0.00422181 Jy ! Component: 900 - total flux cleaned = 0.00433064 Jy ! Component: 950 - total flux cleaned = 0.00454319 Jy ! Component: 1000 - total flux cleaned = 0.00471684 Jy ! Component: 1050 - total flux cleaned = 0.004887 Jy ! Component: 1100 - total flux cleaned = 0.00502062 Jy ! Component: 1150 - total flux cleaned = 0.00508644 Jy ! Component: 1200 - total flux cleaned = 0.00528017 Jy ! Component: 1250 - total flux cleaned = 0.00528073 Jy ! Component: 1300 - total flux cleaned = 0.00549946 Jy ! Component: 1350 - total flux cleaned = 0.00559179 Jy ! Component: 1400 - total flux cleaned = 0.00562191 Jy ! Component: 1450 - total flux cleaned = 0.00571127 Jy ! Component: 1500 - total flux cleaned = 0.00579994 Jy ! Component: 1550 - total flux cleaned = 0.00597377 Jy ! Component: 1600 - total flux cleaned = 0.00605941 Jy ! Component: 1650 - total flux cleaned = 0.00622859 Jy ! Component: 1700 - total flux cleaned = 0.00636777 Jy ! Component: 1750 - total flux cleaned = 0.00656006 Jy ! Component: 1800 - total flux cleaned = 0.00672239 Jy ! Component: 1850 - total flux cleaned = 0.00688288 Jy ! Component: 1900 - total flux cleaned = 0.00701521 Jy ! Component: 1950 - total flux cleaned = 0.00722381 Jy ! Component: 2000 - total flux cleaned = 0.00719797 Jy ! Component: 2050 - total flux cleaned = 0.00737692 Jy ! Component: 2100 - total flux cleaned = 0.00742765 Jy ! Component: 2150 - total flux cleaned = 0.00755291 Jy ! Component: 2200 - total flux cleaned = 0.00767652 Jy ! Component: 2250 - total flux cleaned = 0.00782318 Jy ! Component: 2300 - total flux cleaned = 0.00779912 Jy ! Component: 2350 - total flux cleaned = 0.00789533 Jy ! Component: 2400 - total flux cleaned = 0.00810966 Jy ! Component: 2450 - total flux cleaned = 0.00808581 Jy ! Component: 2500 - total flux cleaned = 0.00813252 Jy ! Component: 2550 - total flux cleaned = 0.00829462 Jy ! Component: 2600 - total flux cleaned = 0.00836355 Jy ! Component: 2650 - total flux cleaned = 0.0085227 Jy ! Component: 2700 - total flux cleaned = 0.008523 Jy ! Component: 2750 - total flux cleaned = 0.00861258 Jy ! Component: 2800 - total flux cleaned = 0.00870122 Jy ! Component: 2850 - total flux cleaned = 0.00874531 Jy ! Component: 2900 - total flux cleaned = 0.0089201 Jy ! Component: 2950 - total flux cleaned = 0.00896378 Jy ! Component: 3000 - total flux cleaned = 0.0090283 Jy ! Component: 3050 - total flux cleaned = 0.00907115 Jy ! Component: 3100 - total flux cleaned = 0.00921939 Jy ! Component: 3150 - total flux cleaned = 0.00928223 Jy ! Component: 3200 - total flux cleaned = 0.00932392 Jy ! Component: 3250 - total flux cleaned = 0.00938621 Jy ! Component: 3300 - total flux cleaned = 0.00950886 Jy ! Component: 3350 - total flux cleaned = 0.00944774 Jy ! Component: 3400 - total flux cleaned = 0.0095486 Jy ! Component: 3450 - total flux cleaned = 0.0095284 Jy ! Component: 3500 - total flux cleaned = 0.0095882 Jy ! Component: 3550 - total flux cleaned = 0.00968707 Jy ! Component: 3600 - total flux cleaned = 0.00968722 Jy ! Component: 3650 - total flux cleaned = 0.00978471 Jy ! Component: 3700 - total flux cleaned = 0.00982337 Jy ! Component: 3750 - total flux cleaned = 0.00984283 Jy ! Component: 3800 - total flux cleaned = 0.009881 Jy ! Component: 3850 - total flux cleaned = 0.0100136 Jy ! Component: 3900 - total flux cleaned = 0.0100324 Jy ! Component: 3950 - total flux cleaned = 0.010126 Jy ! Component: 4000 - total flux cleaned = 0.0101817 Jy ! Component: 4050 - total flux cleaned = 0.0102556 Jy ! Total flux subtracted in 4096 components = 0.0102557 Jy ! Clean residual min=-0.001134 max=0.001125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.214542 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 320 components and 0.214542 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0151-1732_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.208 x 9.228 at -5.688 degrees (North through East) ! Clean map min=-0.0021176 max=0.19959 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0151-1732_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.199587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.507306 0.507306 1.01461 2.02923 4.05845 8.1169 16.2338 32.4676 64.9352 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.199 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 591.358 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0151-1732_S_uvs.log closed on Sat Nov 29 13:49:00 2014