! Started logfile: /d2/scr/pima/rv101_uvs/J0136+4751_X_uvs.log on Sat Nov 29 16:28:03 2014 obs /d2/scr/pima/rv101_uvs/J0136+4751_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_X_uva.fits ! AN table 1: 196 integrations on 3 of 3 possible baselines. ! AN table 2: 28 integrations on 6 of 6 possible baselines. ! AN table 3: 9 integrations on 1 of 1 possible baselines. ! AN table 4: 29 integrations on 15 of 15 possible baselines. ! AN table 5: 9 integrations on 3 of 3 possible baselines. ! AN table 6: 9 integrations on 6 of 6 possible baselines. ! AN table 7: 37 integrations on 28 of 28 possible baselines. ! AN table 8: 32 integrations on 1 of 1 possible baselines. ! AN table 9: 9 integrations on 1 of 1 possible baselines. ! AN table 10: 17 integrations on 1 of 1 possible baselines. ! AN table 11: 15 integrations on 36 of 36 possible baselines. ! AN table 12: 32 integrations on 6 of 6 possible baselines. ! AN table 13: 30 integrations on 10 of 10 possible baselines. ! AN table 14: 12 integrations on 28 of 28 possible baselines. ! AN table 15: 9 integrations on 1 of 1 possible baselines. ! AN table 16: 155 integrations on 1 of 1 possible baselines. ! AN table 17: 37 integrations on 66 of 66 possible baselines. ! AN table 18: 19 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.653138 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 16736 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0136+4751_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 57 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 128 telescope corrections were flagged in sub-array 7. ! A total of 64 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 49 telescope corrections were flagged in sub-array 12. ! A total of 48 telescope corrections were flagged in sub-array 13. ! A total of 47 telescope corrections were flagged in sub-array 14. ! A total of 18 telescope corrections were flagged in sub-array 15. ! A total of 310 telescope corrections were flagged in sub-array 16. ! A total of 201 telescope corrections were flagged in sub-array 17. ! A total of 15 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 57 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 128 telescope corrections were flagged in sub-array 7. ! A total of 64 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 49 telescope corrections were flagged in sub-array 12. ! A total of 48 telescope corrections were flagged in sub-array 13. ! A total of 47 telescope corrections were flagged in sub-array 14. ! A total of 18 telescope corrections were flagged in sub-array 15. ! A total of 310 telescope corrections were flagged in sub-array 16. ! A total of 201 telescope corrections were flagged in sub-array 17. ! A total of 15 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 3. ! A total of 588 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 83 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 179 telescope corrections were flagged in sub-array 7. ! A total of 64 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 107 telescope corrections were flagged in sub-array 12. ! A total of 74 telescope corrections were flagged in sub-array 13. ! A total of 54 telescope corrections were flagged in sub-array 14. ! A total of 18 telescope corrections were flagged in sub-array 15. ! A total of 310 telescope corrections were flagged in sub-array 16. ! A total of 237 telescope corrections were flagged in sub-array 17. ! A total of 15 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 4. ! A total of 588 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 18 telescope corrections were flagged in sub-array 3. ! A total of 83 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 179 telescope corrections were flagged in sub-array 7. ! A total of 64 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 107 telescope corrections were flagged in sub-array 12. ! A total of 74 telescope corrections were flagged in sub-array 13. ! A total of 54 telescope corrections were flagged in sub-array 14. ! A total of 18 telescope corrections were flagged in sub-array 15. ! A total of 310 telescope corrections were flagged in sub-array 16. ! A total of 237 telescope corrections were flagged in sub-array 17. ! A total of 15 telescope corrections were flagged in sub-array 18. ! ! Fit before self-cal, rms=4.786989Jy sigma=26.417719 ! Fit after self-cal, rms=3.714095Jy sigma=20.600888 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.56% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.671 mas, bmaj=0.744 mas, bpa=-15.28 degrees ! Estimated noise=2.06611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35948 Jy ! Component: 100 - total flux cleaned = 4.09389 Jy ! Total flux subtracted in 100 components = 4.09389 Jy ! Clean residual min=-0.107812 max=0.219305 Jy/beam ! Clean residual mean=0.001289 rms=0.026084 Jy/beam ! Combined flux in latest and established models = 4.09389 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 4.09389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979773Jy sigma=4.292195 ! Fit after self-cal, rms=0.979736Jy sigma=4.292030 ! Inverting map ! Your choice of large map pixels excluded 1.56% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217688 Jy ! Component: 100 - total flux cleaned = 0.342903 Jy ! Total flux subtracted in 100 components = 0.342903 Jy ! Clean residual min=-0.096496 max=0.120507 Jy/beam ! Clean residual mean=0.000729 rms=0.023616 Jy/beam ! Combined flux in latest and established models = 4.43679 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 4.43679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.852818Jy sigma=3.702470 ! Fit after self-cal, rms=0.852777Jy sigma=3.702337 ! Inverting map ! Your choice of large map pixels excluded 1.56% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.56% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.8136 mas, bmaj=0.8313 mas, bpa=16.78 degrees ! Estimated noise=1.47371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197987 Jy ! Component: 100 - total flux cleaned = 0.277731 Jy ! Component: 150 - total flux cleaned = 0.314564 Jy ! Component: 200 - total flux cleaned = 0.316826 Jy ! Total flux subtracted in 200 components = 0.316826 Jy ! Clean residual min=-0.108947 max=0.115643 Jy/beam ! Clean residual mean=0.000687 rms=0.025080 Jy/beam ! Combined flux in latest and established models = 4.75362 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 4.75362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775896Jy sigma=3.622095 ! Fit after self-cal, rms=0.775871Jy sigma=3.622022 ! Inverting map ! Your choice of large map pixels excluded 1.56% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8136 x 0.8313 at 16.78 degrees (North through East) ! Clean map min=-0.10012 max=4.5 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 483 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.69 MA 1.01 NY 0.98 ON 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.10 MA 1.02 NL 1.28 NY 0.97 ! ON 0.82 WF 0.83 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.07 NL 1.10 SC 1.08 WF 0.85 ! ! A total of 27 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* LA 1.13 MA 1.04 NL 1.03 ! NY 0.98 ON 0.82 SC 1.10 WF 0.83 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.06 HN 1.08 KP 1.00* LA 1.09 ! MA 1.04 NL 1.03 OV 1.03 PT 1.08 ! SC 1.05 ! ! A total of 51 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.03 NY 0.98 ON 0.86 OV 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MA 1.05 MK 1.08 NY 0.99 ON 0.85 ! WF 0.84 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.06 KP 1.00* LA 1.07 MK 1.04 ! NL 1.03 NY 1.03 OV 1.03 PT 1.04 ! ! Telescope amplitude corrections in sub-array 15: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! FD 1.03 HN 1.07 KP 1.00* LA 1.05 ! MK 1.01 NL 1.02 NY 1.00 ON 0.84 ! OV 0.99 PT 1.02 SC 1.05 WF 0.83 ! ! A total of 42 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 2. ! A total of 483 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.71 MA 0.97 NY 0.94 ON 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.13 MA 0.99 NL 1.27 NY 0.94 ! ON 0.81 WF 0.85 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.09 NL 1.10 SC 1.13 WF 0.87 ! ! A total of 27 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* LA 1.09 MA 0.99 NL 1.04 ! NY 0.95 ON 0.83 SC 1.16 WF 0.85 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.06 HN 1.09 KP 1.00* LA 1.05 ! MA 0.99 NL 1.05 OV 1.02 PT 0.97 ! SC 1.09 ! ! A total of 51 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.99 NY 0.98 ON 0.83 OV 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MA 1.00 MK 1.09 NY 0.98 ON 0.85 ! WF 0.86 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.05 KP 1.00* LA 1.03 MK 1.04 ! NL 1.03 NY 1.01 OV 1.01 PT 0.96 ! ! Telescope amplitude corrections in sub-array 15: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* ON 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! FD 1.04 HN 1.08 KP 1.00* LA 1.01 ! MK 1.04 NL 1.02 NY 0.97 ON 0.84 ! OV 0.97 PT 0.92 SC 1.07 WF 0.86 ! ! A total of 42 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.16 MA 1.06 NL 1.34 NY 1.00* ! ON 0.95 WF 0.89 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.13 NL 1.14 SC 1.11 WF 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* LA 1.16 MA 1.04 NL 1.07 ! NY 1.00* ON 0.95 SC 1.11 WF 0.87 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.07 HN 1.11 KP 1.00* LA 1.11 ! MA 1.04 NL 1.08 OV 1.08 PT 0.96 ! SC 1.05 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MA 1.12 MK 1.08 NY 1.00* ON 1.01 ! WF 0.90 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.05 KP 1.00* LA 1.09 MK 1.02 ! NL 1.07 NY 1.00* OV 1.10 PT 0.95 ! ! Telescope amplitude corrections in sub-array 15: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! FD 1.02 HN 1.12 KP 1.00* LA 1.07 ! MK 1.00 NL 1.04 NY 1.00* ON 1.00 ! OV 1.04 PT 0.91 SC 1.03 WF 0.87 ! ! A total of 42 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.16 MA 1.13 NL 1.33 NY 1.00* ! ON 1.03 WF 0.98 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.11 NL 1.16 SC 1.13 WF 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HN 1.00* LA 1.12 MA 1.15 NL 1.08 ! NY 1.00* ON 1.01 SC 1.13 WF 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! FD 1.08 HN 1.12 KP 1.00* LA 1.07 ! MA 1.13 NL 1.08 OV 1.05 PT 0.98 ! SC 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! ! A total of 48 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! MA 1.15 MK 1.15 NY 1.00* ON 1.08 ! WF 0.94 ! ! Telescope amplitude corrections in sub-array 14: ! FD 1.08 KP 1.00* LA 1.06 MK 1.07 ! NL 1.07 NY 1.00* OV 1.06 PT 0.96 ! ! Telescope amplitude corrections in sub-array 15: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! NY 0.00* ON 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 17. ! Telescope amplitude corrections in sub-array 17: ! FD 1.05 HN 1.13 KP 1.00* LA 1.04 ! MK 1.05 NL 1.07 NY 1.00* ON 1.07 ! OV 1.01 PT 0.93 SC 1.05 WF 0.97 ! ! A total of 42 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=0.775871Jy sigma=3.622022 ! Fit after self-cal, rms=0.254281Jy sigma=1.145648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7796 mas, bmaj=0.8244 mas, bpa=68.04 degrees ! Estimated noise=1.58917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040284 Jy ! Component: 100 - total flux cleaned = 0.055209 Jy ! Component: 150 - total flux cleaned = 0.0605461 Jy ! Component: 200 - total flux cleaned = 0.0646679 Jy ! Total flux subtracted in 200 components = 0.0646679 Jy ! Clean residual min=-0.011917 max=0.014072 Jy/beam ! Clean residual mean=0.000348 rms=0.002869 Jy/beam ! Combined flux in latest and established models = 4.81828 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 4.81828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246234Jy sigma=1.106865 ! Fit after self-cal, rms=0.244894Jy sigma=1.095484 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132903 Jy ! Component: 100 - total flux cleaned = 0.0186833 Jy ! Component: 150 - total flux cleaned = 0.0219766 Jy ! Component: 200 - total flux cleaned = 0.0248348 Jy ! Total flux subtracted in 200 components = 0.0248348 Jy ! Clean residual min=-0.012195 max=0.011618 Jy/beam ! Clean residual mean=0.000256 rms=0.002564 Jy/beam ! Combined flux in latest and established models = 4.84312 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 4.84312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243097Jy sigma=1.087719 ! Fit after self-cal, rms=0.242786Jy sigma=1.085848 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242786Jy sigma=1.085848 ! Fit after self-cal, rms=0.240560Jy sigma=1.074014 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7797 mas, bmaj=0.8247 mas, bpa=68.25 degrees ! Estimated noise=1.58847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115175 Jy ! Component: 100 - total flux cleaned = 0.0150495 Jy ! Component: 150 - total flux cleaned = 0.0178723 Jy ! Component: 200 - total flux cleaned = 0.0202542 Jy ! Total flux subtracted in 200 components = 0.0202542 Jy ! Clean residual min=-0.008304 max=0.010253 Jy/beam ! Clean residual mean=0.000257 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 4.86337 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 4.86337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239207Jy sigma=1.067107 ! Fit after self-cal, rms=0.239038Jy sigma=1.065715 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34.8, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915567 Jy ! Component: 100 - total flux cleaned = 0.0139123 Jy ! Component: 150 - total flux cleaned = 0.0172781 Jy ! Component: 200 - total flux cleaned = 0.0194646 Jy ! Total flux subtracted in 200 components = 0.0194646 Jy ! Clean residual min=-0.007802 max=0.009234 Jy/beam ! Clean residual mean=0.000197 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 4.88284 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 4.88284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238441Jy sigma=1.062011 ! Fit after self-cal, rms=0.238371Jy sigma=1.061547 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (13, -32.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792436 Jy ! Component: 100 - total flux cleaned = 0.011255 Jy ! Component: 150 - total flux cleaned = 0.0133001 Jy ! Component: 200 - total flux cleaned = 0.014164 Jy ! Total flux subtracted in 200 components = 0.014164 Jy ! Clean residual min=-0.007390 max=0.008334 Jy/beam ! Clean residual mean=0.000152 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 4.897 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 4.897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237925Jy sigma=1.059093 ! Fit after self-cal, rms=0.237904Jy sigma=1.058886 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (28.8, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479515 Jy ! Component: 100 - total flux cleaned = 0.00663787 Jy ! Component: 150 - total flux cleaned = 0.00782212 Jy ! Component: 200 - total flux cleaned = 0.00877908 Jy ! Total flux subtracted in 200 components = 0.00877908 Jy ! Clean residual min=-0.007102 max=0.007585 Jy/beam ! Clean residual mean=0.000132 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 4.90578 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 88 components and 4.90578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237536Jy sigma=1.057055 ! Fit after self-cal, rms=0.237527Jy sigma=1.056923 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-7.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672146 Jy ! Component: 100 - total flux cleaned = 0.00838867 Jy ! Component: 150 - total flux cleaned = 0.00898858 Jy ! Component: 200 - total flux cleaned = 0.00955971 Jy ! Total flux subtracted in 200 components = 0.00955971 Jy ! Clean residual min=-0.007007 max=0.007247 Jy/beam ! Clean residual mean=0.000100 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 4.91534 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 100 components and 4.91534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237241Jy sigma=1.055455 ! Fit after self-cal, rms=0.237221Jy sigma=1.055226 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (10.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615401 Jy ! Component: 100 - total flux cleaned = 0.00710338 Jy ! Component: 150 - total flux cleaned = 0.00794821 Jy ! Component: 200 - total flux cleaned = 0.00835084 Jy ! Total flux subtracted in 200 components = 0.00835084 Jy ! Clean residual min=-0.006807 max=0.006812 Jy/beam ! Clean residual mean=0.000070 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 4.92369 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 111 components and 4.92369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236907Jy sigma=1.054249 ! Fit after self-cal, rms=0.236901Jy sigma=1.054110 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236901Jy sigma=1.054110 ! Fit after self-cal, rms=0.236417Jy sigma=1.051767 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7798 mas, bmaj=0.8249 mas, bpa=68.36 degrees ! Estimated noise=1.58861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307934 Jy ! Component: 100 - total flux cleaned = 0.00555512 Jy ! Component: 150 - total flux cleaned = 0.00734664 Jy ! Component: 200 - total flux cleaned = 0.00859874 Jy ! Total flux subtracted in 200 components = 0.00859874 Jy ! Clean residual min=-0.006578 max=0.006752 Jy/beam ! Clean residual mean=0.000102 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 4.93229 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 116 components and 4.93229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236190Jy sigma=1.050520 ! Fit after self-cal, rms=0.236178Jy sigma=1.050413 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40.4, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547568 Jy ! Component: 100 - total flux cleaned = 0.00729786 Jy ! Component: 150 - total flux cleaned = 0.00840456 Jy ! Component: 200 - total flux cleaned = 0.00918398 Jy ! Total flux subtracted in 200 components = 0.00918398 Jy ! Clean residual min=-0.006322 max=0.006292 Jy/beam ! Clean residual mean=0.000082 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 4.94147 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 124 components and 4.94147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235913Jy sigma=1.049430 ! Fit after self-cal, rms=0.235902Jy sigma=1.049334 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-0.6, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408346 Jy ! Component: 100 - total flux cleaned = 0.00492502 Jy ! Component: 150 - total flux cleaned = 0.00543792 Jy ! Component: 200 - total flux cleaned = 0.00580453 Jy ! Total flux subtracted in 200 components = 0.00580453 Jy ! Clean residual min=-0.006042 max=0.006163 Jy/beam ! Clean residual mean=0.000062 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 4.94728 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 136 components and 4.94728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235672Jy sigma=1.048288 ! Fit after self-cal, rms=0.235645Jy sigma=1.048161 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235645Jy sigma=1.048161 ! Fit after self-cal, rms=0.235570Jy sigma=1.047794 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=1.965 mas, bmaj=2.47 mas, bpa=-46.9 degrees ! Estimated noise=2.50239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368086 Jy ! Component: 100 - total flux cleaned = 0.00415797 Jy ! Component: 150 - total flux cleaned = 0.0049873 Jy ! Component: 200 - total flux cleaned = 0.0057198 Jy ! Total flux subtracted in 200 components = 0.0057198 Jy ! Clean residual min=-0.006876 max=0.007114 Jy/beam ! Clean residual mean=0.000162 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 4.953 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 153 components and 4.953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235517Jy sigma=1.047429 ! Fit after self-cal, rms=0.235517Jy sigma=1.047345 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148623 Jy ! Component: 100 - total flux cleaned = 0.00171836 Jy ! Component: 150 - total flux cleaned = 0.00202828 Jy ! Component: 200 - total flux cleaned = 0.00231249 Jy ! Total flux subtracted in 200 components = 0.00231249 Jy ! Clean residual min=-0.006381 max=0.006591 Jy/beam ! Clean residual mean=0.000136 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 4.95531 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 165 components and 4.95531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235513Jy sigma=1.047302 ! Fit after self-cal, rms=0.235515Jy sigma=1.047263 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7798 mas, bmaj=0.825 mas, bpa=68.4 degrees ! Estimated noise=1.58863 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7798 x 0.825 at 68.4 degrees (North through East) ! Clean map min=-0.0053836 max=4.4809 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235515Jy sigma=1.047263 ! Fit after self-cal, rms=0.205277Jy sigma=0.834758 ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7799 mas, bmaj=0.8251 mas, bpa=68.27 degrees ! Estimated noise=1.5885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187167 Jy ! Component: 100 - total flux cleaned = -0.00212728 Jy ! Component: 150 - total flux cleaned = -0.00212176 Jy ! Component: 200 - total flux cleaned = -0.0018881 Jy ! Total flux subtracted in 200 components = -0.0018881 Jy ! Clean residual min=-0.005590 max=0.006005 Jy/beam ! Clean residual mean=-0.000012 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 4.95342 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 181 components and 4.95342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205080Jy sigma=0.834001 ! Fit after self-cal, rms=0.205082Jy sigma=0.833980 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (12.8, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208603 Jy ! Component: 100 - total flux cleaned = 0.0019771 Jy ! Component: 150 - total flux cleaned = 0.00150399 Jy ! Component: 200 - total flux cleaned = 0.00139089 Jy ! Total flux subtracted in 200 components = 0.00139089 Jy ! Clean residual min=-0.005225 max=0.005687 Jy/beam ! Clean residual mean=-0.000017 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 4.95481 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 192 components and 4.95481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204829Jy sigma=0.832885 ! Fit after self-cal, rms=0.204829Jy sigma=0.832757 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (9, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234799 Jy ! Component: 100 - total flux cleaned = 0.00358035 Jy ! Component: 150 - total flux cleaned = 0.00322453 Jy ! Component: 200 - total flux cleaned = 0.00278546 Jy ! Total flux subtracted in 200 components = 0.00278546 Jy ! Clean residual min=-0.005195 max=0.005654 Jy/beam ! Clean residual mean=-0.000022 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 4.9576 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 204 components and 4.9576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204600Jy sigma=0.831581 ! Fit after self-cal, rms=0.204584Jy sigma=0.831452 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-38.6, 33.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329363 Jy ! Component: 100 - total flux cleaned = 0.00329378 Jy ! Component: 150 - total flux cleaned = 0.0035277 Jy ! Component: 200 - total flux cleaned = 0.00396141 Jy ! Total flux subtracted in 200 components = 0.00396141 Jy ! Clean residual min=-0.005219 max=0.005101 Jy/beam ! Clean residual mean=-0.000031 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 4.96156 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 217 components and 4.96156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204358Jy sigma=0.830477 ! Fit after self-cal, rms=0.204364Jy sigma=0.830376 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204364Jy sigma=0.830376 ! Fit after self-cal, rms=0.204275Jy sigma=0.829881 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.6748 mas, bmaj=0.7175 mas, bpa=-19.97 degrees ! Estimated noise=2.30392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4659 Jy ! Component: 100 - total flux cleaned = 4.22202 Jy ! Component: 150 - total flux cleaned = 4.43848 Jy ! Component: 200 - total flux cleaned = 4.54941 Jy ! Total flux subtracted in 200 components = 4.54941 Jy ! Clean residual min=-0.023102 max=0.057026 Jy/beam ! Clean residual mean=0.000491 rms=0.006000 Jy/beam ! Combined flux in latest and established models = 4.54942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 4.54942 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7799 mas, bmaj=0.8251 mas, bpa=68.24 degrees ! Estimated noise=1.58858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939881 Jy ! Component: 100 - total flux cleaned = 0.15688 Jy ! Component: 150 - total flux cleaned = 0.202551 Jy ! Component: 200 - total flux cleaned = 0.236331 Jy ! Total flux subtracted in 200 components = 0.236331 Jy ! Clean residual min=-0.011640 max=0.019391 Jy/beam ! Clean residual mean=0.000549 rms=0.003264 Jy/beam ! Combined flux in latest and established models = 4.78575 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 4.78575 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255035 Jy ! Component: 100 - total flux cleaned = 0.0455053 Jy ! Component: 150 - total flux cleaned = 0.0619414 Jy ! Component: 200 - total flux cleaned = 0.0759538 Jy ! Total flux subtracted in 200 components = 0.0759538 Jy ! Clean residual min=-0.008400 max=0.011045 Jy/beam ! Clean residual mean=0.000278 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 4.8617 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 57 components and 4.8617 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (5.6, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127867 Jy ! Component: 100 - total flux cleaned = 0.0239397 Jy ! Component: 150 - total flux cleaned = 0.0339835 Jy ! Component: 200 - total flux cleaned = 0.0430782 Jy ! Total flux subtracted in 200 components = 0.0430782 Jy ! Clean residual min=-0.007521 max=0.008623 Jy/beam ! Clean residual mean=0.000145 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 4.90478 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 74 components and 4.90478 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-13.6, 17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00865424 Jy ! Component: 100 - total flux cleaned = 0.0153942 Jy ! Component: 150 - total flux cleaned = 0.0213223 Jy ! Component: 200 - total flux cleaned = 0.0263064 Jy ! Total flux subtracted in 200 components = 0.0263064 Jy ! Clean residual min=-0.006982 max=0.007350 Jy/beam ! Clean residual mean=0.000062 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 4.93109 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 91 components and 4.93109 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Added new window around map position (-3.4, -31.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588953 Jy ! Component: 100 - total flux cleaned = 0.00852202 Jy ! Component: 150 - total flux cleaned = 0.0112624 Jy ! Component: 200 - total flux cleaned = 0.0138773 Jy ! Total flux subtracted in 200 components = 0.0138773 Jy ! Clean residual min=-0.006875 max=0.006464 Jy/beam ! Clean residual mean=0.000024 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 4.94496 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 110 components and 4.94496 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=1.964 mas, bmaj=2.47 mas, bpa=-46.9 degrees ! Estimated noise=2.50185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852414 Jy ! Component: 100 - total flux cleaned = 0.0113031 Jy ! Component: 150 - total flux cleaned = 0.0131638 Jy ! Component: 200 - total flux cleaned = 0.0139852 Jy ! Total flux subtracted in 200 components = 0.0139852 Jy ! Clean residual min=-0.006200 max=0.006136 Jy/beam ! Clean residual mean=-0.000079 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 4.95895 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593609 Jy ! Component: 100 - total flux cleaned = 0.00113201 Jy ! Component: 150 - total flux cleaned = 0.00175571 Jy ! Component: 200 - total flux cleaned = 0.00210807 Jy ! Total flux subtracted in 200 components = 0.00210807 Jy ! Clean residual min=-0.005812 max=0.006003 Jy/beam ! Clean residual mean=-0.000099 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 4.96105 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 159 components and 4.96105 Jy ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! Estimated beam: bmin=0.7799 mas, bmaj=0.8251 mas, bpa=68.24 degrees ! Estimated noise=1.58858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000692965 Jy ! Component: 100 - total flux cleaned = -0.000302084 Jy ! Component: 150 - total flux cleaned = 0.000429499 Jy ! Component: 200 - total flux cleaned = 0.000778663 Jy ! Total flux subtracted in 200 components = 0.000778663 Jy ! Clean residual min=-0.006689 max=0.005941 Jy/beam ! Clean residual mean=-0.000028 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 4.96183 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 172 components and 4.96183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206059Jy sigma=0.844228 ! Fit after self-cal, rms=0.205847Jy sigma=0.842949 wmodel /d2/scr/pima/rv101_uvs/J0136+4751_X_map.mod ! Writing 172 model components to file: /d2/scr/pima/rv101_uvs/J0136+4751_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0136+4751_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0136+4751_X_map.win ! wwins: Wrote 16 windows to /d2/scr/pima/rv101_uvs/J0136+4751_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811444 Jy ! Component: 100 - total flux cleaned = 0.00102205 Jy ! Component: 150 - total flux cleaned = 0.000824042 Jy ! Component: 200 - total flux cleaned = 0.000628406 Jy ! Component: 250 - total flux cleaned = 5.66335e-05 Jy ! Component: 300 - total flux cleaned = -3.54491e-05 Jy ! Component: 350 - total flux cleaned = -0.000125085 Jy ! Component: 400 - total flux cleaned = -0.000123282 Jy ! Component: 450 - total flux cleaned = -0.000209319 Jy ! Component: 500 - total flux cleaned = 0.000133564 Jy ! Component: 550 - total flux cleaned = 0.00021827 Jy ! Component: 600 - total flux cleaned = 0.000134639 Jy ! Component: 650 - total flux cleaned = -3.01764e-05 Jy ! Component: 700 - total flux cleaned = -0.000272153 Jy ! Component: 750 - total flux cleaned = -0.000271679 Jy ! Component: 800 - total flux cleaned = -0.00035008 Jy ! Component: 850 - total flux cleaned = -0.000427711 Jy ! Component: 900 - total flux cleaned = -0.000428343 Jy ! Component: 950 - total flux cleaned = -0.000733171 Jy ! Component: 1000 - total flux cleaned = -0.000732441 Jy ! Component: 1050 - total flux cleaned = -0.00110732 Jy ! Component: 1100 - total flux cleaned = -0.000958232 Jy ! Component: 1150 - total flux cleaned = -0.00117904 Jy ! Component: 1200 - total flux cleaned = -0.00125218 Jy ! Component: 1250 - total flux cleaned = -0.00132487 Jy ! Component: 1300 - total flux cleaned = -0.00161109 Jy ! Component: 1350 - total flux cleaned = -0.00153995 Jy ! Component: 1400 - total flux cleaned = -0.00168107 Jy ! Component: 1450 - total flux cleaned = -0.00154096 Jy ! Component: 1500 - total flux cleaned = -0.00181837 Jy ! Component: 1550 - total flux cleaned = -0.0018187 Jy ! Component: 1600 - total flux cleaned = -0.00181859 Jy ! Component: 1650 - total flux cleaned = -0.00168377 Jy ! Component: 1700 - total flux cleaned = -0.00175105 Jy ! Component: 1750 - total flux cleaned = -0.00175081 Jy ! Component: 1800 - total flux cleaned = -0.00175115 Jy ! Component: 1850 - total flux cleaned = -0.00175064 Jy ! Component: 1900 - total flux cleaned = -0.00168536 Jy ! Component: 1950 - total flux cleaned = -0.00162098 Jy ! Component: 2000 - total flux cleaned = -0.00162148 Jy ! Component: 2050 - total flux cleaned = -0.00181313 Jy ! Component: 2100 - total flux cleaned = -0.00194003 Jy ! Component: 2150 - total flux cleaned = -0.00175094 Jy ! Component: 2200 - total flux cleaned = -0.00206465 Jy ! Component: 2250 - total flux cleaned = -0.00212703 Jy ! Component: 2300 - total flux cleaned = -0.0021888 Jy ! Component: 2350 - total flux cleaned = -0.00225065 Jy ! Component: 2400 - total flux cleaned = -0.0023732 Jy ! Component: 2450 - total flux cleaned = -0.00237345 Jy ! Component: 2500 - total flux cleaned = -0.00237354 Jy ! Component: 2550 - total flux cleaned = -0.00255452 Jy ! Component: 2600 - total flux cleaned = -0.00273371 Jy ! Component: 2650 - total flux cleaned = -0.00291191 Jy ! Component: 2700 - total flux cleaned = -0.00279383 Jy ! Component: 2750 - total flux cleaned = -0.00273542 Jy ! Component: 2800 - total flux cleaned = -0.00285242 Jy ! Component: 2850 - total flux cleaned = -0.00308494 Jy ! Component: 2900 - total flux cleaned = -0.00302701 Jy ! Component: 2950 - total flux cleaned = -0.00291196 Jy ! Component: 3000 - total flux cleaned = -0.00285483 Jy ! Component: 3050 - total flux cleaned = -0.00296794 Jy ! Component: 3100 - total flux cleaned = -0.0030248 Jy ! Component: 3150 - total flux cleaned = -0.00302466 Jy ! Component: 3200 - total flux cleaned = -0.00313678 Jy ! Component: 3250 - total flux cleaned = -0.00313692 Jy ! Component: 3300 - total flux cleaned = -0.00313675 Jy ! Component: 3350 - total flux cleaned = -0.00313661 Jy ! Component: 3400 - total flux cleaned = -0.0031915 Jy ! Component: 3450 - total flux cleaned = -0.00302757 Jy ! Component: 3500 - total flux cleaned = -0.00297342 Jy ! Component: 3550 - total flux cleaned = -0.00286457 Jy ! Component: 3600 - total flux cleaned = -0.00297221 Jy ! Component: 3650 - total flux cleaned = -0.00275756 Jy ! Component: 3700 - total flux cleaned = -0.00281114 Jy ! Component: 3750 - total flux cleaned = -0.00270448 Jy ! Component: 3800 - total flux cleaned = -0.00296895 Jy ! Component: 3850 - total flux cleaned = -0.00275857 Jy ! Component: 3900 - total flux cleaned = -0.00249595 Jy ! Component: 3950 - total flux cleaned = -0.00254865 Jy ! Component: 4000 - total flux cleaned = -0.00244462 Jy ! Component: 4050 - total flux cleaned = -0.00254798 Jy ! Total flux subtracted in 4096 components = -0.00244485 Jy ! Clean residual min=-0.002668 max=0.003471 Jy/beam ! Clean residual mean=-0.000017 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 4.95939 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 509 components and 4.95939 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0136+4751_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7799 x 0.8251 at 68.24 degrees (North through East) ! Clean map min=-0.0037818 max=4.4819 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.48188 invert ! Inverting map ! Your choice of large map pixels excluded 1.51% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! The y-axis pixel size should ideally be below 0.1983 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000833195 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0557709 0.0557709 0.111542 0.223083 0.446167 0.892334 1.78467 3.56934 7.13867 14.2773 28.5547 57.1094 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.481 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5379.15 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0136+4751_X_uvs.log closed on Sat Nov 29 16:28:10 2014