! Started logfile: /d2/scr/pima/rv101_uvs/J0136+4751_S_uvs.log on Sat Nov 29 13:48:34 2014 obs /d2/scr/pima/rv101_uvs/J0136+4751_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_S_uva.fits ! AN table 1: 54 integrations on 3 of 3 possible baselines. ! AN table 2: 7 integrations on 6 of 6 possible baselines. ! AN table 3: 2 integrations on 1 of 1 possible baselines. ! AN table 4: 7 integrations on 15 of 15 possible baselines. ! AN table 5: 2 integrations on 3 of 3 possible baselines. ! AN table 6: 2 integrations on 6 of 6 possible baselines. ! AN table 7: 9 integrations on 45 of 45 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 4 integrations on 1 of 1 possible baselines. ! AN table 10: 4 integrations on 36 of 36 possible baselines. ! AN table 11: 8 integrations on 6 of 6 possible baselines. ! AN table 12: 7 integrations on 10 of 10 possible baselines. ! AN table 13: 3 integrations on 28 of 28 possible baselines. ! AN table 14: 2 integrations on 1 of 1 possible baselines. ! AN table 15: 22 integrations on 1 of 1 possible baselines. ! AN table 16: 9 integrations on 66 of 66 possible baselines. ! AN table 17: 8 integrations on 3 of 3 possible baselines. ! AN table 18: 4 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.758046 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5276 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0136+4751_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 23 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 8 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! A total of 44 telescope corrections were flagged in sub-array 15. ! A total of 32 telescope corrections were flagged in sub-array 16. ! A total of 24 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 23 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 8 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! A total of 44 telescope corrections were flagged in sub-array 15. ! A total of 32 telescope corrections were flagged in sub-array 16. ! A total of 24 telescope corrections were flagged in sub-array 17. ! A total of 12 telescope corrections were flagged in sub-array 18. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 15 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 8 telescope corrections were flagged in sub-array 12. ! A total of 8 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! A total of 44 telescope corrections were flagged in sub-array 15. ! A total of 32 telescope corrections were flagged in sub-array 16. ! A total of 24 telescope corrections were flagged in sub-array 17. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 31 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 20 telescope corrections were flagged in sub-array 10. ! A total of 23 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 8 telescope corrections were flagged in sub-array 13. ! A total of 4 telescope corrections were flagged in sub-array 14. ! A total of 44 telescope corrections were flagged in sub-array 15. ! A total of 32 telescope corrections were flagged in sub-array 16. ! A total of 24 telescope corrections were flagged in sub-array 17. ! A total of 12 telescope corrections were flagged in sub-array 18. ! ! Fit before self-cal, rms=2.582358Jy sigma=11.948883 ! Fit after self-cal, rms=1.712366Jy sigma=4.572965 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=3.061 mas, bpa=-59.48 degrees ! Estimated noise=2.61654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06562 Jy ! Component: 100 - total flux cleaned = 1.41159 Jy ! Total flux subtracted in 100 components = 1.41159 Jy ! Clean residual min=-0.068570 max=0.154746 Jy/beam ! Clean residual mean=0.000492 rms=0.016866 Jy/beam ! Combined flux in latest and established models = 1.41159 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.41159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.576486Jy sigma=3.210355 ! Fit after self-cal, rms=1.575841Jy sigma=3.205327 ! Inverting map ! Added new window around map position (-1.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179728 Jy ! Component: 100 - total flux cleaned = 0.292685 Jy ! Total flux subtracted in 100 components = 0.292685 Jy ! Clean residual min=-0.065801 max=0.080464 Jy/beam ! Clean residual mean=0.000014 rms=0.014342 Jy/beam ! Combined flux in latest and established models = 1.70427 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 1.70427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.511466Jy sigma=2.781837 ! Fit after self-cal, rms=1.511201Jy sigma=2.776001 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=3.406 mas, bpa=-80.33 degrees ! Estimated noise=2.05976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.092413 Jy ! Component: 100 - total flux cleaned = 0.109248 Jy ! Component: 150 - total flux cleaned = 0.118085 Jy ! Component: 200 - total flux cleaned = 0.125465 Jy ! Total flux subtracted in 200 components = 0.125465 Jy ! Clean residual min=-0.070184 max=0.061973 Jy/beam ! Clean residual mean=-0.004571 rms=0.014577 Jy/beam ! Combined flux in latest and established models = 1.82974 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 1.82974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.486239Jy sigma=2.603975 ! Fit after self-cal, rms=1.485728Jy sigma=2.590605 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.208 x 3.406 at -80.33 degrees (North through East) ! Clean map min=-0.070914 max=1.357 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.97 HN 1.01 KP 1.16 LA 1.05 ! MA 1.00* NL 1.06 OV 0.97 PT 1.01 ! SC 0.96 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.95 KP 1.18 LA 1.02 MK 0.91 ! NL 1.05 NY 1.18 OV 1.03 PT 1.01 ! ! Telescope amplitude corrections in sub-array 14: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 3. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 1.00* NY 1.00* ON 1.00* OV 1.00* ! ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 0.99 KP 1.01 LA 0.92 MK 0.88 ! NL 1.06 NY 1.07 OV 1.03 PT 0.99 ! ! Telescope amplitude corrections in sub-array 14: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* ON 0.00* WF 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 18. ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HN 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* NL 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* NL 1.00* SC 1.00* WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.00* HN 1.00* LA 1.00* MA 1.00* ! NL 1.00* NY 1.00* ON 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! LA 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* NY 0.00* ON 0.00* OV 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! MA 1.00* MK 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! Telescope amplitude corrections in sub-array 13: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* NY 1.00* OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! NL 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 16: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 17: ! NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 18: ! FD 0.00* MA 0.00* WF 0.00* ! ! ! Fit before self-cal, rms=1.485728Jy sigma=2.590605 ! Fit after self-cal, rms=0.760774Jy sigma=2.549262 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=3.404 mas, bpa=-89.25 degrees ! Estimated noise=2.06968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231822 Jy ! Component: 100 - total flux cleaned = 0.0324081 Jy ! Component: 150 - total flux cleaned = 0.0380727 Jy ! Component: 200 - total flux cleaned = 0.0400292 Jy ! Total flux subtracted in 200 components = 0.0400292 Jy ! Clean residual min=-0.066116 max=0.049907 Jy/beam ! Clean residual mean=-0.004322 rms=0.013502 Jy/beam ! Combined flux in latest and established models = 1.86977 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 1.86977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.754993Jy sigma=2.501331 ! Fit after self-cal, rms=0.755107Jy sigma=2.497049 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.755107Jy sigma=2.497049 ! Fit after self-cal, rms=0.755073Jy sigma=2.494840 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=3.401 mas, bpa=-88.91 degrees ! Estimated noise=2.07061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056705 Jy ! Component: 100 - total flux cleaned = 0.00566209 Jy ! Component: 150 - total flux cleaned = 0.00650822 Jy ! Component: 200 - total flux cleaned = 0.00649237 Jy ! Total flux subtracted in 200 components = 0.00649237 Jy ! Clean residual min=-0.065620 max=0.048629 Jy/beam ! Clean residual mean=-0.004415 rms=0.013210 Jy/beam ! Combined flux in latest and established models = 1.87626 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 1.87626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.751749Jy sigma=2.471502 ! Fit after self-cal, rms=0.751870Jy sigma=2.470267 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.29836e-05 Jy ! Component: 100 - total flux cleaned = -6.67298e-05 Jy ! Component: 150 - total flux cleaned = -0.000757857 Jy ! Component: 200 - total flux cleaned = -7.75176e-05 Jy ! Total flux subtracted in 200 components = -7.75176e-05 Jy ! Clean residual min=-0.064307 max=0.047333 Jy/beam ! Clean residual mean=-0.004415 rms=0.013036 Jy/beam ! Combined flux in latest and established models = 1.87618 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 1.87618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749572Jy sigma=2.455884 ! Fit after self-cal, rms=0.749708Jy sigma=2.455315 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749708Jy sigma=2.455315 ! Fit after self-cal, rms=0.749696Jy sigma=2.454043 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=3.397 mas, bpa=-88.73 degrees ! Estimated noise=2.0706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150927 Jy ! Component: 100 - total flux cleaned = 0.00150829 Jy ! Component: 150 - total flux cleaned = 0.00150845 Jy ! Component: 200 - total flux cleaned = 0.00151422 Jy ! Total flux subtracted in 200 components = 0.00151422 Jy ! Clean residual min=-0.063908 max=0.046857 Jy/beam ! Clean residual mean=-0.004437 rms=0.012927 Jy/beam ! Combined flux in latest and established models = 1.8777 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 1.8777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747518Jy sigma=2.444746 ! Fit after self-cal, rms=0.747680Jy sigma=2.444294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54001e-05 Jy ! Component: 100 - total flux cleaned = 1.21694e-05 Jy ! Component: 150 - total flux cleaned = 4.27247e-06 Jy ! Component: 200 - total flux cleaned = 1.67458e-05 Jy ! Total flux subtracted in 200 components = 1.67458e-05 Jy ! Clean residual min=-0.063438 max=0.046617 Jy/beam ! Clean residual mean=-0.004438 rms=0.012851 Jy/beam ! Combined flux in latest and established models = 1.87771 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 82 components and 1.87771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.745935Jy sigma=2.437910 ! Fit after self-cal, rms=0.746076Jy sigma=2.437532 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.746076Jy sigma=2.437532 ! Fit after self-cal, rms=0.746078Jy sigma=2.437216 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.035 mas, bmaj=9.85 mas, bpa=-47.43 degrees ! Estimated noise=2.83322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015494 Jy ! Component: 100 - total flux cleaned = 0.00103107 Jy ! Component: 150 - total flux cleaned = 0.00141695 Jy ! Component: 200 - total flux cleaned = 0.0017704 Jy ! Total flux subtracted in 200 components = 0.0017704 Jy ! Clean residual min=-0.067540 max=0.045442 Jy/beam ! Clean residual mean=-0.012565 rms=0.016540 Jy/beam ! Combined flux in latest and established models = 1.87948 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 1.87948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.744727Jy sigma=2.441912 ! Fit after self-cal, rms=0.744829Jy sigma=2.440504 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.75349e-05 Jy ! Component: 100 - total flux cleaned = -0.000316409 Jy ! Component: 150 - total flux cleaned = 3.1288e-05 Jy ! Component: 200 - total flux cleaned = 0.000370854 Jy ! Total flux subtracted in 200 components = 0.000370854 Jy ! Clean residual min=-0.067179 max=0.046080 Jy/beam ! Clean residual mean=-0.012577 rms=0.016509 Jy/beam ! Combined flux in latest and established models = 1.87985 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 1.87985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.744008Jy sigma=2.444776 ! Fit after self-cal, rms=0.744132Jy sigma=2.443700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=3.396 mas, bpa=-88.63 degrees ! Estimated noise=2.07056 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 3.396 at -88.63 degrees (North through East) ! Clean map min=-0.075582 max=1.3392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.744132Jy sigma=2.443700 ! Fit after self-cal, rms=0.744110Jy sigma=2.442958 ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=3.396 mas, bpa=-88.49 degrees ! Estimated noise=2.07075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471642 Jy ! Component: 100 - total flux cleaned = 0.00364279 Jy ! Component: 150 - total flux cleaned = 0.00314587 Jy ! Component: 200 - total flux cleaned = 0.00266226 Jy ! Total flux subtracted in 200 components = 0.00266226 Jy ! Clean residual min=-0.064236 max=0.046627 Jy/beam ! Clean residual mean=-0.004503 rms=0.012786 Jy/beam ! Combined flux in latest and established models = 1.88252 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 1.88252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.743196Jy sigma=2.432498 ! Fit after self-cal, rms=0.743273Jy sigma=2.432238 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31304e-05 Jy ! Component: 100 - total flux cleaned = -0.000424948 Jy ! Component: 150 - total flux cleaned = -0.000842715 Jy ! Component: 200 - total flux cleaned = -0.000839081 Jy ! Total flux subtracted in 200 components = -0.000839081 Jy ! Clean residual min=-0.063866 max=0.046087 Jy/beam ! Clean residual mean=-0.004492 rms=0.012715 Jy/beam ! Combined flux in latest and established models = 1.88168 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 1.88168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.742460Jy sigma=2.426895 ! Fit after self-cal, rms=0.742526Jy sigma=2.426799 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.742526Jy sigma=2.426799 ! Fit after self-cal, rms=0.742530Jy sigma=2.426521 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=3.021 mas, bpa=-61.97 degrees ! Estimated noise=2.68159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03611 Jy ! Component: 100 - total flux cleaned = 1.37665 Jy ! Component: 150 - total flux cleaned = 1.55941 Jy ! Component: 200 - total flux cleaned = 1.68272 Jy ! Total flux subtracted in 200 components = 1.68272 Jy ! Clean residual min=-0.072162 max=0.073241 Jy/beam ! Clean residual mean=0.000038 rms=0.014430 Jy/beam ! Combined flux in latest and established models = 1.68272 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.68272 Jy ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=3.395 mas, bpa=-88.45 degrees ! Estimated noise=2.07063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.089551 Jy ! Component: 100 - total flux cleaned = 0.1129 Jy ! Component: 150 - total flux cleaned = 0.132093 Jy ! Component: 200 - total flux cleaned = 0.148139 Jy ! Total flux subtracted in 200 components = 0.148139 Jy ! Clean residual min=-0.066012 max=0.059762 Jy/beam ! Clean residual mean=-0.003812 rms=0.013743 Jy/beam ! Combined flux in latest and established models = 1.83086 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 1.83086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.033 mas, bmaj=9.852 mas, bpa=-47.4 degrees ! Estimated noise=2.83425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403054 Jy ! Component: 100 - total flux cleaned = 0.041582 Jy ! Component: 150 - total flux cleaned = 0.0437683 Jy ! Component: 200 - total flux cleaned = 0.045507 Jy ! Total flux subtracted in 200 components = 0.045507 Jy ! Clean residual min=-0.064073 max=0.048365 Jy/beam ! Clean residual mean=-0.012449 rms=0.016740 Jy/beam ! Combined flux in latest and established models = 1.87637 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749191 Jy ! Component: 100 - total flux cleaned = 0.00205442 Jy ! Component: 150 - total flux cleaned = 0.0031372 Jy ! Component: 200 - total flux cleaned = 0.00361398 Jy ! Total flux subtracted in 200 components = 0.00361398 Jy ! Clean residual min=-0.065448 max=0.048235 Jy/beam ! Clean residual mean=-0.012587 rms=0.016580 Jy/beam ! Combined flux in latest and established models = 1.87998 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 70 components and 1.87998 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=3.395 mas, bpa=-88.45 degrees ! Estimated noise=2.07063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140893 Jy ! Component: 100 - total flux cleaned = -0.00244389 Jy ! Component: 150 - total flux cleaned = -0.00145594 Jy ! Component: 200 - total flux cleaned = -0.00238978 Jy ! Total flux subtracted in 200 components = -0.00238978 Jy ! Clean residual min=-0.064254 max=0.049006 Jy/beam ! Clean residual mean=-0.004436 rms=0.013256 Jy/beam ! Combined flux in latest and established models = 1.87759 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 1.87759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.751755Jy sigma=2.482178 ! Fit after self-cal, rms=0.750689Jy sigma=2.478270 wmodel /d2/scr/pima/rv101_uvs/J0136+4751_S_map.mod ! Writing 84 model components to file: /d2/scr/pima/rv101_uvs/J0136+4751_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0136+4751_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0136+4751_S_map.win ! wwins: Wrote 3 windows to /d2/scr/pima/rv101_uvs/J0136+4751_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0290661 Jy ! Component: 100 - total flux cleaned = -0.0555624 Jy ! Component: 150 - total flux cleaned = -0.0806651 Jy ! Component: 200 - total flux cleaned = -0.101746 Jy ! Component: 250 - total flux cleaned = -0.117399 Jy ! Component: 300 - total flux cleaned = -0.130732 Jy ! Component: 350 - total flux cleaned = -0.143644 Jy ! Component: 400 - total flux cleaned = -0.155336 Jy ! Component: 450 - total flux cleaned = -0.167501 Jy ! Component: 500 - total flux cleaned = -0.177756 Jy ! Component: 550 - total flux cleaned = -0.186994 Jy ! Component: 600 - total flux cleaned = -0.193773 Jy ! Component: 650 - total flux cleaned = -0.200416 Jy ! Component: 700 - total flux cleaned = -0.206923 Jy ! Component: 750 - total flux cleaned = -0.212595 Jy ! Component: 800 - total flux cleaned = -0.217464 Jy ! Component: 850 - total flux cleaned = -0.222256 Jy ! Component: 900 - total flux cleaned = -0.226989 Jy ! Component: 950 - total flux cleaned = -0.232316 Jy ! Component: 1000 - total flux cleaned = -0.236913 Jy ! Component: 1050 - total flux cleaned = -0.242084 Jy ! Component: 1100 - total flux cleaned = -0.246543 Jy ! Component: 1150 - total flux cleaned = -0.24969 Jy ! Component: 1200 - total flux cleaned = -0.253415 Jy ! Component: 1250 - total flux cleaned = -0.256484 Jy ! Component: 1300 - total flux cleaned = -0.260727 Jy ! Component: 1350 - total flux cleaned = -0.26491 Jy ! Component: 1400 - total flux cleaned = -0.26846 Jy ! Component: 1450 - total flux cleaned = -0.273127 Jy ! Component: 1500 - total flux cleaned = -0.274859 Jy ! Component: 1550 - total flux cleaned = -0.279424 Jy ! Component: 1600 - total flux cleaned = -0.283935 Jy ! Component: 1650 - total flux cleaned = -0.288386 Jy ! Component: 1700 - total flux cleaned = -0.290578 Jy ! Component: 1750 - total flux cleaned = -0.29494 Jy ! Component: 1800 - total flux cleaned = -0.298707 Jy ! Component: 1850 - total flux cleaned = -0.303496 Jy ! Component: 1900 - total flux cleaned = -0.306652 Jy ! Component: 1950 - total flux cleaned = -0.30978 Jy ! Component: 2000 - total flux cleaned = -0.312873 Jy ! Component: 2050 - total flux cleaned = -0.316956 Jy ! Component: 2100 - total flux cleaned = -0.320486 Jy ! Component: 2150 - total flux cleaned = -0.32299 Jy ! Component: 2200 - total flux cleaned = -0.326949 Jy ! Component: 2250 - total flux cleaned = -0.3294 Jy ! Component: 2300 - total flux cleaned = -0.332803 Jy ! Component: 2350 - total flux cleaned = -0.335692 Jy ! Component: 2400 - total flux cleaned = -0.337599 Jy ! Component: 2450 - total flux cleaned = -0.340907 Jy ! Component: 2500 - total flux cleaned = -0.342314 Jy ! Component: 2550 - total flux cleaned = -0.34696 Jy ! Component: 2600 - total flux cleaned = -0.349259 Jy ! Component: 2650 - total flux cleaned = -0.351996 Jy ! Component: 2700 - total flux cleaned = -0.354254 Jy ! Component: 2750 - total flux cleaned = -0.356496 Jy ! Component: 2800 - total flux cleaned = -0.359162 Jy ! Component: 2850 - total flux cleaned = -0.361801 Jy ! Component: 2900 - total flux cleaned = -0.363981 Jy ! Component: 2950 - total flux cleaned = -0.365278 Jy ! Component: 3000 - total flux cleaned = -0.368288 Jy ! Component: 3050 - total flux cleaned = -0.370844 Jy ! Component: 3100 - total flux cleaned = -0.372954 Jy ! Component: 3150 - total flux cleaned = -0.374632 Jy ! Component: 3200 - total flux cleaned = -0.377132 Jy ! Component: 3250 - total flux cleaned = -0.379197 Jy ! Component: 3300 - total flux cleaned = -0.381658 Jy ! Component: 3350 - total flux cleaned = -0.384103 Jy ! Component: 3400 - total flux cleaned = -0.386123 Jy ! Component: 3450 - total flux cleaned = -0.387332 Jy ! Component: 3500 - total flux cleaned = -0.390925 Jy ! Component: 3550 - total flux cleaned = -0.392905 Jy ! Component: 3600 - total flux cleaned = -0.395659 Jy ! Component: 3650 - total flux cleaned = -0.397222 Jy ! Component: 3700 - total flux cleaned = -0.399165 Jy ! Component: 3750 - total flux cleaned = -0.401097 Jy ! Component: 3800 - total flux cleaned = -0.404931 Jy ! Component: 3850 - total flux cleaned = -0.406835 Jy ! Component: 3900 - total flux cleaned = -0.409108 Jy ! Component: 3950 - total flux cleaned = -0.411744 Jy ! Component: 4000 - total flux cleaned = -0.414362 Jy ! Component: 4050 - total flux cleaned = -0.41622 Jy ! Total flux subtracted in 4096 components = -0.417701 Jy ! Clean residual min=-0.024589 max=0.020840 Jy/beam ! Clean residual mean=-0.000995 rms=0.006333 Jy/beam ! Combined flux in latest and established models = 1.45989 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 413 components and 1.45989 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0136+4751_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.158 x 3.395 at -88.45 degrees (North through East) ! Clean map min=-0.07146 max=1.387 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0136+4751_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.38695 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00631355 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36563 1.36563 2.73127 5.46253 10.9251 21.8501 43.7003 87.4006 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0189 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.386 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 219.678 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0136+4751_S_uvs.log closed on Sat Nov 29 13:48:39 2014