! Started logfile: /d2/scr/pima/rv101_uvs/J0121+1149_X_uvs.log on Sat Nov 29 16:27:55 2014 obs /d2/scr/pima/rv101_uvs/J0121+1149_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0121+1149_X_uva.fits ! AN table 1: 152 integrations on 3 of 3 possible baselines. ! AN table 2: 22 integrations on 3 of 3 possible baselines. ! AN table 3: 22 integrations on 10 of 10 possible baselines. ! AN table 4: 9 integrations on 3 of 3 possible baselines. ! AN table 5: 22 integrations on 6 of 6 possible baselines. ! AN table 6: 11 integrations on 15 of 15 possible baselines. ! AN table 7: 9 integrations on 3 of 3 possible baselines. ! AN table 8: 11 integrations on 6 of 6 possible baselines. ! AN table 9: 11 integrations on 6 of 6 possible baselines. ! AN table 10: 9 integrations on 45 of 45 possible baselines. ! AN table 11: 9 integrations on 21 of 21 possible baselines. ! AN table 12: 9 integrations on 21 of 21 possible baselines. ! AN table 13: 9 integrations on 15 of 15 possible baselines. ! AN table 14: 9 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.94424 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8196 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0121+1149_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 14 telescope corrections were flagged in sub-array 9. ! A total of 27 telescope corrections were flagged in sub-array 10. ! A total of 21 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 19 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 14 telescope corrections were flagged in sub-array 9. ! A total of 27 telescope corrections were flagged in sub-array 10. ! A total of 21 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 19 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 456 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 23 telescope corrections were flagged in sub-array 8. ! A total of 29 telescope corrections were flagged in sub-array 9. ! A total of 27 telescope corrections were flagged in sub-array 10. ! A total of 21 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 19 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 456 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 48 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 27 telescope corrections were flagged in sub-array 7. ! A total of 23 telescope corrections were flagged in sub-array 8. ! A total of 29 telescope corrections were flagged in sub-array 9. ! A total of 27 telescope corrections were flagged in sub-array 10. ! A total of 21 telescope corrections were flagged in sub-array 11. ! A total of 14 telescope corrections were flagged in sub-array 12. ! A total of 19 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=2.264344Jy sigma=17.813924 ! Fit after self-cal, rms=1.104416Jy sigma=8.380641 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.67 mas, bmaj=1.652 mas, bpa=-6.287 degrees ! Estimated noise=1.56287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.38693 Jy ! Component: 100 - total flux cleaned = 1.77568 Jy ! Total flux subtracted in 100 components = 1.77568 Jy ! Clean residual min=-0.107056 max=0.174198 Jy/beam ! Clean residual mean=0.001514 rms=0.017327 Jy/beam ! Combined flux in latest and established models = 1.77568 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.77568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.558756Jy sigma=3.889137 ! Fit after self-cal, rms=0.558284Jy sigma=3.886608 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211625 Jy ! Component: 100 - total flux cleaned = 0.35268 Jy ! Total flux subtracted in 100 components = 0.35268 Jy ! Clean residual min=-0.071524 max=0.076561 Jy/beam ! Clean residual mean=0.000582 rms=0.011438 Jy/beam ! Combined flux in latest and established models = 2.12836 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 2.12836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424958Jy sigma=2.714708 ! Fit after self-cal, rms=0.423966Jy sigma=2.708565 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0969643 Jy ! Component: 100 - total flux cleaned = 0.1632 Jy ! Total flux subtracted in 100 components = 0.1632 Jy ! Clean residual min=-0.056081 max=0.047476 Jy/beam ! Clean residual mean=0.000151 rms=0.009860 Jy/beam ! Combined flux in latest and established models = 2.29156 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 2.29156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389538Jy sigma=2.449695 ! Fit after self-cal, rms=0.389246Jy sigma=2.448116 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.747 mas, bmaj=1.822 mas, bpa=-7.536 degrees ! Estimated noise=1.37584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476899 Jy ! Component: 100 - total flux cleaned = 0.066869 Jy ! Component: 150 - total flux cleaned = 0.0702866 Jy ! Component: 200 - total flux cleaned = 0.0729717 Jy ! Total flux subtracted in 200 components = 0.0729717 Jy ! Clean residual min=-0.045368 max=0.043573 Jy/beam ! Clean residual mean=0.002116 rms=0.011665 Jy/beam ! Combined flux in latest and established models = 2.36454 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 2.36454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377552Jy sigma=2.414625 ! Fit after self-cal, rms=0.377468Jy sigma=2.413932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.747 x 1.822 at -7.536 degrees (North through East) ! Clean map min=-0.038029 max=1.8634 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 270 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.00* MA 1.00* NY 1.00* ON 1.00* ! WF 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* KP 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.04 MA 1.01 NY 0.99 ON 0.84 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.03 KP 1.00* LA 1.04 MK 1.04 ! NL 0.97 PT 1.04 WF 0.84 ! ! Telescope amplitude corrections in sub-array 12: ! HN 1.03 LA 1.02 NL 0.97 OV 0.97 ! PT 1.03 SC 1.01 WF 0.83 ! ! Telescope amplitude corrections in sub-array 13: ! KP 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* OV 0.00* PT 0.00* ! ! ! Correcting IF 2. ! A total of 270 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.06 MA 0.99 NY 1.02 ON 0.84 ! WF 0.84 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 1.00* MA 1.00* NL 1.00* NY 1.00* ! ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* KP 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 1.03 MA 1.01 NY 1.02 ON 0.84 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 1.00* NY 1.00* ON 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.01 HN 1.06 KP 1.00* LA 1.00 ! MK 1.05 NL 1.00 OV 0.96 PT 0.92 ! SC 1.08 WF 0.86 ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.03 KP 1.00* LA 0.99 MK 1.04 ! NL 0.99 PT 0.95 WF 0.87 ! ! Telescope amplitude corrections in sub-array 12: ! HN 1.04 LA 0.99 NL 0.99 OV 0.96 ! PT 0.93 SC 1.06 WF 0.86 ! ! Telescope amplitude corrections in sub-array 13: ! KP 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* OV 0.00* PT 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.15 MA 1.03 NY 1.00* ON 0.99 ! WF 0.86 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 1.10 MA 1.09 NL 1.08 NY 1.00* ! ON 1.01 WF 0.85 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* KP 0.00* PT 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.01 HN 1.09 KP 1.00* LA 1.06 ! MK 1.07 NL 1.05 OV 1.04 PT 0.93 ! SC 1.07 WF 0.88 ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.08 KP 1.00* LA 1.08 MK 1.06 ! NL 1.03 PT 0.94 WF 0.90 ! ! Telescope amplitude corrections in sub-array 12: ! HN 1.08 LA 1.08 NL 1.03 OV 1.04 ! PT 0.94 SC 1.02 WF 0.89 ! ! Telescope amplitude corrections in sub-array 13: ! KP 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* OV 0.00* PT 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MA 0.00* NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NY 0.00* WF 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.14 MA 1.14 NY 1.00* ON 1.06 ! WF 1.01 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* NL 0.00* WF 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! MA 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 1.12 MA 1.15 NL 1.09 NY 1.00* ! ON 1.08 WF 0.93 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* KP 0.00* PT 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HN 0.00* MA 0.00* NY 0.00* ON 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! HN 0.00* NY 0.00* ON 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.06 HN 1.11 KP 1.00* LA 1.04 ! MK 1.10 NL 1.06 OV 1.02 PT 0.95 ! SC 1.09 WF 1.01 ! ! Telescope amplitude corrections in sub-array 11: ! HN 1.09 KP 1.00* LA 1.03 MK 1.14 ! NL 1.07 PT 0.97 WF 0.99 ! ! Telescope amplitude corrections in sub-array 12: ! HN 1.09 LA 1.05 NL 1.07 OV 1.00 ! PT 0.97 SC 1.06 WF 0.99 ! ! Telescope amplitude corrections in sub-array 13: ! KP 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* ! ! Telescope amplitude corrections in sub-array 14: ! MK 0.00* OV 0.00* PT 0.00* ! ! ! Fit before self-cal, rms=0.377468Jy sigma=2.413932 ! Fit after self-cal, rms=0.281537Jy sigma=1.868827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7337 mas, bmaj=1.893 mas, bpa=-6.555 degrees ! Estimated noise=1.46291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268507 Jy ! Component: 100 - total flux cleaned = 0.0302557 Jy ! Component: 150 - total flux cleaned = 0.0311083 Jy ! Component: 200 - total flux cleaned = 0.03193 Jy ! Total flux subtracted in 200 components = 0.03193 Jy ! Clean residual min=-0.030073 max=0.039088 Jy/beam ! Clean residual mean=0.001890 rms=0.007861 Jy/beam ! Combined flux in latest and established models = 2.39647 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 2.39647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271258Jy sigma=1.794885 ! Fit after self-cal, rms=0.270349Jy sigma=1.787108 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270349Jy sigma=1.787108 ! Fit after self-cal, rms=0.263334Jy sigma=1.754551 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7344 mas, bmaj=1.891 mas, bpa=-6.6 degrees ! Estimated noise=1.46181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0067448 Jy ! Component: 100 - total flux cleaned = 0.00601195 Jy ! Component: 150 - total flux cleaned = 0.00665902 Jy ! Component: 200 - total flux cleaned = 0.00667276 Jy ! Total flux subtracted in 200 components = 0.00667276 Jy ! Clean residual min=-0.028157 max=0.032574 Jy/beam ! Clean residual mean=0.001881 rms=0.007205 Jy/beam ! Combined flux in latest and established models = 2.40314 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 2.40314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258888Jy sigma=1.725388 ! Fit after self-cal, rms=0.258736Jy sigma=1.723384 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269094 Jy ! Component: 100 - total flux cleaned = 0.00269419 Jy ! Component: 150 - total flux cleaned = 0.00269809 Jy ! Component: 200 - total flux cleaned = 0.00269804 Jy ! Total flux subtracted in 200 components = 0.00269804 Jy ! Clean residual min=-0.027834 max=0.027759 Jy/beam ! Clean residual mean=0.001837 rms=0.007030 Jy/beam ! Combined flux in latest and established models = 2.40584 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 2.40584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256446Jy sigma=1.708840 ! Fit after self-cal, rms=0.256398Jy sigma=1.708414 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256398Jy sigma=1.708414 ! Fit after self-cal, rms=0.252156Jy sigma=1.692847 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7351 mas, bmaj=1.89 mas, bpa=-6.626 degrees ! Estimated noise=1.46159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010645 Jy ! Component: 100 - total flux cleaned = 0.000134653 Jy ! Component: 150 - total flux cleaned = 0.00013461 Jy ! Component: 200 - total flux cleaned = 0.000132497 Jy ! Total flux subtracted in 200 components = 0.000132497 Jy ! Clean residual min=-0.026746 max=0.026581 Jy/beam ! Clean residual mean=0.001936 rms=0.006864 Jy/beam ! Combined flux in latest and established models = 2.40597 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 2.40597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250306Jy sigma=1.681029 ! Fit after self-cal, rms=0.250269Jy sigma=1.680672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10588e-05 Jy ! Component: 100 - total flux cleaned = -0.000353671 Jy ! Component: 150 - total flux cleaned = -0.000353299 Jy ! Component: 200 - total flux cleaned = -0.000344557 Jy ! Total flux subtracted in 200 components = -0.000344557 Jy ! Clean residual min=-0.026558 max=0.026392 Jy/beam ! Clean residual mean=0.001940 rms=0.006787 Jy/beam ! Combined flux in latest and established models = 2.40562 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 2.40562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249034Jy sigma=1.672522 ! Fit after self-cal, rms=0.249016Jy sigma=1.672335 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249016Jy sigma=1.672335 ! Fit after self-cal, rms=0.247849Jy sigma=1.641193 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.949 mas, bmaj=3.128 mas, bpa=-11.74 degrees ! Estimated noise=2.14306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00654008 Jy ! Component: 100 - total flux cleaned = -0.00784224 Jy ! Component: 150 - total flux cleaned = -0.00839566 Jy ! Component: 200 - total flux cleaned = -0.00890263 Jy ! Total flux subtracted in 200 components = -0.00890263 Jy ! Clean residual min=-0.041023 max=0.046801 Jy/beam ! Clean residual mean=0.006072 rms=0.014168 Jy/beam ! Combined flux in latest and established models = 2.39672 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 2.39672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247557Jy sigma=1.645788 ! Fit after self-cal, rms=0.247458Jy sigma=1.643405 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547831 Jy ! Component: 100 - total flux cleaned = -0.00033986 Jy ! Component: 150 - total flux cleaned = -0.00071629 Jy ! Component: 200 - total flux cleaned = -0.00106492 Jy ! Total flux subtracted in 200 components = -0.00106492 Jy ! Clean residual min=-0.040343 max=0.045988 Jy/beam ! Clean residual mean=0.006116 rms=0.013989 Jy/beam ! Combined flux in latest and established models = 2.39566 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 2.39566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248359Jy sigma=1.657221 ! Fit after self-cal, rms=0.248289Jy sigma=1.656034 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7354 mas, bmaj=1.891 mas, bpa=-6.588 degrees ! Estimated noise=1.46478 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7354 x 1.891 at -6.588 degrees (North through East) ! Clean map min=-0.04833 max=1.8753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248289Jy sigma=1.656034 ! Fit after self-cal, rms=0.226849Jy sigma=1.467222 ! Inverting map and beam ! Estimated beam: bmin=0.7355 mas, bmaj=1.895 mas, bpa=-6.655 degrees ! Estimated noise=1.46865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112941 Jy ! Component: 100 - total flux cleaned = -0.00162549 Jy ! Component: 150 - total flux cleaned = -0.0020801 Jy ! Component: 200 - total flux cleaned = -0.00208157 Jy ! Total flux subtracted in 200 components = -0.00208157 Jy ! Clean residual min=-0.020100 max=0.021888 Jy/beam ! Clean residual mean=0.001883 rms=0.005120 Jy/beam ! Combined flux in latest and established models = 2.39358 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 2.39358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224857Jy sigma=1.450040 ! Fit after self-cal, rms=0.224771Jy sigma=1.449119 ! Inverting map ! Added new window around map position (0.6, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016493 Jy ! Component: 100 - total flux cleaned = 0.0219561 Jy ! Component: 150 - total flux cleaned = 0.0233966 Jy ! Component: 200 - total flux cleaned = 0.0250634 Jy ! Total flux subtracted in 200 components = 0.0250634 Jy ! Clean residual min=-0.019633 max=0.019457 Jy/beam ! Clean residual mean=0.001475 rms=0.004800 Jy/beam ! Combined flux in latest and established models = 2.41864 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 2.41864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220674Jy sigma=1.421957 ! Fit after self-cal, rms=0.220376Jy sigma=1.420235 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220376Jy sigma=1.420235 ! Fit after self-cal, rms=0.219218Jy sigma=1.397294 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6606 mas, bmaj=1.71 mas, bpa=-5.158 degrees ! Estimated noise=1.67507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4193 Jy ! Component: 100 - total flux cleaned = 1.81463 Jy ! Component: 150 - total flux cleaned = 2.02042 Jy ! Component: 200 - total flux cleaned = 2.15015 Jy ! Total flux subtracted in 200 components = 2.15015 Jy ! Clean residual min=-0.043510 max=0.068880 Jy/beam ! Clean residual mean=0.000910 rms=0.008719 Jy/beam ! Combined flux in latest and established models = 2.15015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.15015 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7358 mas, bmaj=1.894 mas, bpa=-6.646 degrees ! Estimated noise=1.47222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106369 Jy ! Component: 100 - total flux cleaned = 0.169941 Jy ! Component: 150 - total flux cleaned = 0.198784 Jy ! Component: 200 - total flux cleaned = 0.218925 Jy ! Total flux subtracted in 200 components = 0.218925 Jy ! Clean residual min=-0.024868 max=0.027435 Jy/beam ! Clean residual mean=0.002433 rms=0.006034 Jy/beam ! Combined flux in latest and established models = 2.36908 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 2.36908 Jy ! Inverting map ! Added new window around map position (15.4, 31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168526 Jy ! Component: 100 - total flux cleaned = 0.0273918 Jy ! Component: 150 - total flux cleaned = 0.0374148 Jy ! Component: 200 - total flux cleaned = 0.042317 Jy ! Total flux subtracted in 200 components = 0.042317 Jy ! Clean residual min=-0.019712 max=0.023268 Jy/beam ! Clean residual mean=0.001805 rms=0.005152 Jy/beam ! Combined flux in latest and established models = 2.4114 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 2.4114 Jy ! Inverting map ! Added new window around map position (-19, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168137 Jy ! Component: 100 - total flux cleaned = 0.0217841 Jy ! Component: 150 - total flux cleaned = 0.0270805 Jy ! Component: 200 - total flux cleaned = 0.0307612 Jy ! Total flux subtracted in 200 components = 0.0307612 Jy ! Clean residual min=-0.019481 max=0.020276 Jy/beam ! Clean residual mean=0.001364 rms=0.004694 Jy/beam ! Combined flux in latest and established models = 2.44216 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 2.44216 Jy ! Inverting map ! Added new window around map position (-16.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147903 Jy ! Component: 100 - total flux cleaned = 0.0186536 Jy ! Component: 150 - total flux cleaned = 0.0228095 Jy ! Component: 200 - total flux cleaned = 0.0257539 Jy ! Total flux subtracted in 200 components = 0.0257539 Jy ! Clean residual min=-0.018475 max=0.016302 Jy/beam ! Clean residual mean=0.000977 rms=0.004281 Jy/beam ! Combined flux in latest and established models = 2.46791 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 83 components and 2.46791 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=3.134 mas, bpa=-11.89 degrees ! Estimated noise=2.15488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141202 Jy ! Component: 100 - total flux cleaned = 0.0168772 Jy ! Component: 150 - total flux cleaned = 0.0203856 Jy ! Component: 200 - total flux cleaned = 0.022979 Jy ! Total flux subtracted in 200 components = 0.022979 Jy ! Clean residual min=-0.027166 max=0.024377 Jy/beam ! Clean residual mean=0.001826 rms=0.007613 Jy/beam ! Combined flux in latest and established models = 2.49089 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187549 Jy ! Component: 100 - total flux cleaned = 0.0039997 Jy ! Component: 150 - total flux cleaned = 0.00478844 Jy ! Component: 200 - total flux cleaned = 0.00626413 Jy ! Total flux subtracted in 200 components = 0.00626413 Jy ! Clean residual min=-0.025704 max=0.023509 Jy/beam ! Clean residual mean=0.001588 rms=0.007309 Jy/beam ! Combined flux in latest and established models = 2.49715 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 120 components and 2.49715 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7358 mas, bmaj=1.894 mas, bpa=-6.646 degrees ! Estimated noise=1.47222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231934 Jy ! Component: 100 - total flux cleaned = -0.00319753 Jy ! Component: 150 - total flux cleaned = -0.00358869 Jy ! Component: 200 - total flux cleaned = -0.00358931 Jy ! Total flux subtracted in 200 components = -0.00358931 Jy ! Clean residual min=-0.017432 max=0.015455 Jy/beam ! Clean residual mean=0.000601 rms=0.003933 Jy/beam ! Combined flux in latest and established models = 2.49356 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 2.49356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215409Jy sigma=1.392457 ! Fit after self-cal, rms=0.214894Jy sigma=1.385208 wmodel /d2/scr/pima/rv101_uvs/J0121+1149_X_map.mod ! Writing 136 model components to file: /d2/scr/pima/rv101_uvs/J0121+1149_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0121+1149_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0121+1149_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0121+1149_X_map.win ! wwins: Wrote 6 windows to /d2/scr/pima/rv101_uvs/J0121+1149_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00372578 Jy ! Component: 100 - total flux cleaned = -0.00542834 Jy ! Component: 150 - total flux cleaned = -0.00595912 Jy ! Component: 200 - total flux cleaned = -0.00646411 Jy ! Component: 250 - total flux cleaned = -0.00721071 Jy ! Component: 300 - total flux cleaned = -0.00769519 Jy ! Component: 350 - total flux cleaned = -0.00816495 Jy ! Component: 400 - total flux cleaned = -0.0088583 Jy ! Component: 450 - total flux cleaned = -0.00998659 Jy ! Component: 500 - total flux cleaned = -0.010645 Jy ! Component: 550 - total flux cleaned = -0.0112943 Jy ! Component: 600 - total flux cleaned = -0.0125631 Jy ! Component: 650 - total flux cleaned = -0.0129799 Jy ! Component: 700 - total flux cleaned = -0.0144167 Jy ! Component: 750 - total flux cleaned = -0.0156247 Jy ! Component: 800 - total flux cleaned = -0.0170114 Jy ! Component: 850 - total flux cleaned = -0.0181802 Jy ! Component: 900 - total flux cleaned = -0.0195226 Jy ! Component: 950 - total flux cleaned = -0.020465 Jy ! Component: 1000 - total flux cleaned = -0.0221431 Jy ! Component: 1050 - total flux cleaned = -0.0232462 Jy ! Component: 1100 - total flux cleaned = -0.0246959 Jy ! Component: 1150 - total flux cleaned = -0.0261264 Jy ! Component: 1200 - total flux cleaned = -0.0273632 Jy ! Component: 1250 - total flux cleaned = -0.0284051 Jy ! Component: 1300 - total flux cleaned = -0.0292662 Jy ! Component: 1350 - total flux cleaned = -0.0304597 Jy ! Component: 1400 - total flux cleaned = -0.0318064 Jy ! Component: 1450 - total flux cleaned = -0.0328058 Jy ! Component: 1500 - total flux cleaned = -0.0342897 Jy ! Component: 1550 - total flux cleaned = -0.0355926 Jy ! Component: 1600 - total flux cleaned = -0.0370426 Jy ! Component: 1650 - total flux cleaned = -0.0384756 Jy ! Component: 1700 - total flux cleaned = -0.0392637 Jy ! Component: 1750 - total flux cleaned = -0.040822 Jy ! Component: 1800 - total flux cleaned = -0.0422115 Jy ! Component: 1850 - total flux cleaned = -0.0434346 Jy ! Component: 1900 - total flux cleaned = -0.0449486 Jy ! Component: 1950 - total flux cleaned = -0.0461481 Jy ! Component: 2000 - total flux cleaned = -0.047782 Jy ! Component: 2050 - total flux cleaned = -0.0485166 Jy ! Component: 2100 - total flux cleaned = -0.0499763 Jy ! Component: 2150 - total flux cleaned = -0.0508447 Jy ! Component: 2200 - total flux cleaned = -0.0522778 Jy ! Component: 2250 - total flux cleaned = -0.0528466 Jy ! Component: 2300 - total flux cleaned = -0.0542562 Jy ! Component: 2350 - total flux cleaned = -0.0556522 Jy ! Component: 2400 - total flux cleaned = -0.0563435 Jy ! Component: 2450 - total flux cleaned = -0.0575784 Jy ! Component: 2500 - total flux cleaned = -0.0585316 Jy ! Component: 2550 - total flux cleaned = -0.0598824 Jy ! Component: 2600 - total flux cleaned = -0.0604177 Jy ! Component: 2650 - total flux cleaned = -0.0613487 Jy ! Component: 2700 - total flux cleaned = -0.0620077 Jy ! Component: 2750 - total flux cleaned = -0.0633165 Jy ! Component: 2800 - total flux cleaned = -0.0640975 Jy ! Component: 2850 - total flux cleaned = -0.0649999 Jy ! Component: 2900 - total flux cleaned = -0.0661507 Jy ! Component: 2950 - total flux cleaned = -0.0670389 Jy ! Component: 3000 - total flux cleaned = -0.0677944 Jy ! Component: 3050 - total flux cleaned = -0.0690446 Jy ! Component: 3100 - total flux cleaned = -0.0696646 Jy ! Component: 3150 - total flux cleaned = -0.0705276 Jy ! Component: 3200 - total flux cleaned = -0.0712619 Jy ! Component: 3250 - total flux cleaned = -0.072355 Jy ! Component: 3300 - total flux cleaned = -0.0730787 Jy ! Component: 3350 - total flux cleaned = -0.0741559 Jy ! Component: 3400 - total flux cleaned = -0.0754639 Jy ! Component: 3450 - total flux cleaned = -0.075937 Jy ! Component: 3500 - total flux cleaned = -0.0769937 Jy ! Component: 3550 - total flux cleaned = -0.0781593 Jy ! Component: 3600 - total flux cleaned = -0.0789694 Jy ! Component: 3650 - total flux cleaned = -0.080234 Jy ! Component: 3700 - total flux cleaned = -0.0812626 Jy ! Component: 3750 - total flux cleaned = -0.0819449 Jy ! Component: 3800 - total flux cleaned = -0.0827346 Jy ! Component: 3850 - total flux cleaned = -0.0838572 Jy ! Component: 3900 - total flux cleaned = -0.0848605 Jy ! Component: 3950 - total flux cleaned = -0.0857468 Jy ! Component: 4000 - total flux cleaned = -0.0871792 Jy ! Component: 4050 - total flux cleaned = -0.0879454 Jy ! Total flux subtracted in 4096 components = -0.0884898 Jy ! Clean residual min=-0.006927 max=0.006435 Jy/beam ! Clean residual mean=-0.000050 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 2.40507 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 451 components and 2.40507 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0121+1149_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7358 x 1.894 at -6.646 degrees (North through East) ! Clean map min=-0.04455 max=1.8869 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0121+1149_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.88687 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00183443 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.291662 0.291662 0.583324 1.16665 2.3333 4.66659 9.33319 18.6664 37.3327 74.6655 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0055 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.886 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1028.59 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0121+1149_X_uvs.log closed on Sat Nov 29 16:28:00 2014