! Started logfile: /d2/scr/pima/rv101_uvs/J0049+5128_S_uvs.log on Sat Nov 29 13:48:14 2014 obs /d2/scr/pima/rv101_uvs/J0049+5128_S_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0049+5128_S_uva.fits ! AN table 1: 22 integrations on 28 of 28 possible baselines. ! AN table 2: 22 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.990767 visibilities/baseline/integration-bin. ! Found source: J0049+5128 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5580 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0049+5128_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022606Jy sigma=15.890629 ! Fit after self-cal, rms=0.803624Jy sigma=12.500497 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=3.866 mas, bpa=-51.34 degrees ! Estimated noise=1.32634 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152792 Jy ! Component: 100 - total flux cleaned = 0.188088 Jy ! Total flux subtracted in 100 components = 0.188088 Jy ! Clean residual min=-0.008371 max=0.012366 Jy/beam ! Clean residual mean=-0.000018 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.188088 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.188088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076603Jy sigma=0.975241 ! Fit after self-cal, rms=0.076614Jy sigma=0.975045 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118036 Jy ! Component: 100 - total flux cleaned = 0.0163224 Jy ! Total flux subtracted in 100 components = 0.0163224 Jy ! Clean residual min=-0.008427 max=0.007182 Jy/beam ! Clean residual mean=-0.000026 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.204411 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.204411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074873Jy sigma=0.954707 ! Fit after self-cal, rms=0.074889Jy sigma=0.954573 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=5.205 mas, bpa=-52.52 degrees ! Estimated noise=0.649368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341383 Jy ! Component: 100 - total flux cleaned = -0.000338552 Jy ! Component: 150 - total flux cleaned = -0.000296994 Jy ! Component: 200 - total flux cleaned = -0.000295374 Jy ! Total flux subtracted in 200 components = -0.000295374 Jy ! Clean residual min=-0.005144 max=0.005696 Jy/beam ! Clean residual mean=-0.000042 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.204115 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.204115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074788Jy sigma=0.953922 ! Fit after self-cal, rms=0.074775Jy sigma=0.953867 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 5.205 at -52.52 degrees (North through East) ! Clean map min=-0.0050387 max=0.19802 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 KP 1.05 LA 0.95 MK 1.02 ! NL 1.04 OV 1.04 PT 1.03 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 0.99 KP 1.06 LA 0.95 ! MK 1.00 NL 1.09 OV 0.99 PT 1.03 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.96 KP 0.96 LA 0.84 ! MK 1.01 NL 1.00 OV 0.85 PT 0.94 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.074775Jy sigma=0.953867 ! Fit after self-cal, rms=0.072596Jy sigma=0.931846 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.302 mas, bmaj=5.241 mas, bpa=-51.95 degrees ! Estimated noise=0.64365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123756 Jy ! Component: 100 - total flux cleaned = -0.00123758 Jy ! Component: 150 - total flux cleaned = -0.00128099 Jy ! Component: 200 - total flux cleaned = -0.00135065 Jy ! Total flux subtracted in 200 components = -0.00135065 Jy ! Clean residual min=-0.004581 max=0.004358 Jy/beam ! Clean residual mean=-0.000056 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.202765 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.202765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072511Jy sigma=0.930334 ! Fit after self-cal, rms=0.072503Jy sigma=0.930253 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072503Jy sigma=0.930253 ! Fit after self-cal, rms=0.072396Jy sigma=0.930040 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=5.256 mas, bpa=-51.89 degrees ! Estimated noise=0.64207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569235 Jy ! Component: 100 - total flux cleaned = -0.000601855 Jy ! Component: 150 - total flux cleaned = -0.000628312 Jy ! Component: 200 - total flux cleaned = -0.00064965 Jy ! Total flux subtracted in 200 components = -0.00064965 Jy ! Clean residual min=-0.004490 max=0.004378 Jy/beam ! Clean residual mean=-0.000056 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.202115 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.202115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072374Jy sigma=0.929490 ! Fit after self-cal, rms=0.072369Jy sigma=0.929476 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.74746e-05 Jy ! Component: 100 - total flux cleaned = -1.97364e-05 Jy ! Component: 150 - total flux cleaned = -3.65434e-05 Jy ! Component: 200 - total flux cleaned = -3.59921e-05 Jy ! Total flux subtracted in 200 components = -3.59921e-05 Jy ! Clean residual min=-0.004494 max=0.004375 Jy/beam ! Clean residual mean=-0.000056 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.202079 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.202079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072361Jy sigma=0.929344 ! Fit after self-cal, rms=0.072359Jy sigma=0.929335 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072359Jy sigma=0.929335 ! Fit after self-cal, rms=0.072278Jy sigma=0.929239 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.296 mas, bmaj=5.263 mas, bpa=-51.85 degrees ! Estimated noise=0.640969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353448 Jy ! Component: 100 - total flux cleaned = -0.000389727 Jy ! Component: 150 - total flux cleaned = -0.000405293 Jy ! Component: 200 - total flux cleaned = -0.000419195 Jy ! Total flux subtracted in 200 components = -0.000419195 Jy ! Clean residual min=-0.004408 max=0.004371 Jy/beam ! Clean residual mean=-0.000057 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.20166 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.20166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072275Jy sigma=0.929023 ! Fit after self-cal, rms=0.072273Jy sigma=0.929019 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.42869e-05 Jy ! Component: 100 - total flux cleaned = -2.43891e-05 Jy ! Component: 150 - total flux cleaned = -3.71323e-05 Jy ! Component: 200 - total flux cleaned = -3.7274e-05 Jy ! Total flux subtracted in 200 components = -3.7274e-05 Jy ! Clean residual min=-0.004398 max=0.004373 Jy/beam ! Clean residual mean=-0.000057 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.201623 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.201623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072269Jy sigma=0.928952 ! Fit after self-cal, rms=0.072267Jy sigma=0.928951 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072267Jy sigma=0.928951 ! Fit after self-cal, rms=0.072229Jy sigma=0.928917 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9 mas, bmaj=10.71 mas, bpa=-66.46 degrees ! Estimated noise=0.720097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103639 Jy ! Component: 100 - total flux cleaned = -0.00111348 Jy ! Component: 150 - total flux cleaned = -0.00118527 Jy ! Component: 200 - total flux cleaned = -0.00125038 Jy ! Total flux subtracted in 200 components = -0.00125038 Jy ! Clean residual min=-0.005405 max=0.005650 Jy/beam ! Clean residual mean=-0.000101 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.200372 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.200372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072260Jy sigma=0.928671 ! Fit after self-cal, rms=0.072257Jy sigma=0.928654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74502e-05 Jy ! Component: 100 - total flux cleaned = -7.69591e-05 Jy ! Component: 150 - total flux cleaned = -0.000131795 Jy ! Component: 200 - total flux cleaned = -0.000182388 Jy ! Total flux subtracted in 200 components = -0.000182388 Jy ! Clean residual min=-0.005352 max=0.005656 Jy/beam ! Clean residual mean=-0.000101 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.20019 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.20019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072281Jy sigma=0.928728 ! Fit after self-cal, rms=0.072279Jy sigma=0.928708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=5.265 mas, bpa=-51.86 degrees ! Estimated noise=0.640429 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.295 x 5.265 at -51.86 degrees (North through East) ! Clean map min=-0.0042426 max=0.19683 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=3.915 mas, bpa=-50.61 degrees ! Estimated noise=1.30959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150833 Jy ! Component: 100 - total flux cleaned = 0.184964 Jy ! Component: 150 - total flux cleaned = 0.196038 Jy ! Component: 200 - total flux cleaned = 0.201303 Jy ! Total flux subtracted in 200 components = 0.201303 Jy ! Clean residual min=-0.007514 max=0.006423 Jy/beam ! Clean residual mean=-0.000029 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.201302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.201302 Jy ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=5.265 mas, bpa=-51.86 degrees ! Estimated noise=0.640429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195706 Jy ! Component: 100 - total flux cleaned = 0.000315987 Jy ! Component: 150 - total flux cleaned = 0.000464066 Jy ! Component: 200 - total flux cleaned = 0.000503875 Jy ! Total flux subtracted in 200 components = 0.000503875 Jy ! Clean residual min=-0.004396 max=0.004389 Jy/beam ! Clean residual mean=-0.000057 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.201806 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.201806 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9 mas, bmaj=10.71 mas, bpa=-66.46 degrees ! Estimated noise=0.720097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000732193 Jy ! Component: 100 - total flux cleaned = -0.000842151 Jy ! Component: 150 - total flux cleaned = -0.000941918 Jy ! Component: 200 - total flux cleaned = -0.00103215 Jy ! Total flux subtracted in 200 components = -0.00103215 Jy ! Clean residual min=-0.005532 max=0.005701 Jy/beam ! Clean residual mean=-0.000101 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.200774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.35894e-05 Jy ! Component: 100 - total flux cleaned = -0.000136348 Jy ! Component: 150 - total flux cleaned = -0.000211047 Jy ! Component: 200 - total flux cleaned = -0.000280647 Jy ! Total flux subtracted in 200 components = -0.000280647 Jy ! Clean residual min=-0.005464 max=0.005706 Jy/beam ! Clean residual mean=-0.000101 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.200494 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.200494 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=5.265 mas, bpa=-51.86 degrees ! Estimated noise=0.640429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073824 Jy ! Component: 100 - total flux cleaned = 0.000693586 Jy ! Component: 150 - total flux cleaned = 0.000692595 Jy ! Component: 200 - total flux cleaned = 0.000724947 Jy ! Total flux subtracted in 200 components = 0.000724947 Jy ! Clean residual min=-0.004357 max=0.004426 Jy/beam ! Clean residual mean=-0.000057 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.201218 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.201219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072311Jy sigma=0.928960 ! Fit after self-cal, rms=0.072307Jy sigma=0.928916 wmodel /d2/scr/pima/rv101_uvs/J0049+5128_S_map.mod ! Writing 39 model components to file: /d2/scr/pima/rv101_uvs/J0049+5128_S_map.mod wobs /d2/scr/pima/rv101_uvs/J0049+5128_S_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0049+5128_S_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0049+5128_S_map.win ! wwins: Wrote 1 windows to /d2/scr/pima/rv101_uvs/J0049+5128_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000738738 Jy ! Component: 100 - total flux cleaned = 0.00125204 Jy ! Component: 150 - total flux cleaned = 0.00173907 Jy ! Component: 200 - total flux cleaned = 0.002139 Jy ! Component: 250 - total flux cleaned = 0.00220318 Jy ! Component: 300 - total flux cleaned = 0.0022036 Jy ! Component: 350 - total flux cleaned = 0.00208648 Jy ! Component: 400 - total flux cleaned = 0.00208841 Jy ! Component: 450 - total flux cleaned = 0.00214396 Jy ! Component: 500 - total flux cleaned = 0.00192792 Jy ! Component: 550 - total flux cleaned = 0.00187614 Jy ! Component: 600 - total flux cleaned = 0.00177442 Jy ! Component: 650 - total flux cleaned = 0.00152305 Jy ! Component: 700 - total flux cleaned = 0.00132646 Jy ! Component: 750 - total flux cleaned = 0.00103744 Jy ! Component: 800 - total flux cleaned = 0.000848318 Jy ! Component: 850 - total flux cleaned = 0.000617186 Jy ! Component: 900 - total flux cleaned = 0.000526438 Jy ! Component: 950 - total flux cleaned = 0.000301959 Jy ! Component: 1000 - total flux cleaned = 8.26339e-05 Jy ! Component: 1050 - total flux cleaned = -0.000176359 Jy ! Component: 1100 - total flux cleaned = -0.000217738 Jy ! Component: 1150 - total flux cleaned = -0.000301143 Jy ! Component: 1200 - total flux cleaned = -0.000465312 Jy ! Component: 1250 - total flux cleaned = -0.000465777 Jy ! Component: 1300 - total flux cleaned = -0.000545746 Jy ! Component: 1350 - total flux cleaned = -0.000507135 Jy ! Component: 1400 - total flux cleaned = -0.000507761 Jy ! Component: 1450 - total flux cleaned = -0.000546664 Jy ! Component: 1500 - total flux cleaned = -0.000846763 Jy ! Component: 1550 - total flux cleaned = -0.000957734 Jy ! Component: 1600 - total flux cleaned = -0.00117684 Jy ! Component: 1650 - total flux cleaned = -0.00132067 Jy ! Component: 1700 - total flux cleaned = -0.00149918 Jy ! Component: 1750 - total flux cleaned = -0.00163965 Jy ! Component: 1800 - total flux cleaned = -0.00177854 Jy ! Component: 1850 - total flux cleaned = -0.00184755 Jy ! Component: 1900 - total flux cleaned = -0.00201773 Jy ! Component: 1950 - total flux cleaned = -0.00205131 Jy ! Component: 2000 - total flux cleaned = -0.00208563 Jy ! Component: 2050 - total flux cleaned = -0.00228374 Jy ! Component: 2100 - total flux cleaned = -0.00231648 Jy ! Component: 2150 - total flux cleaned = -0.00231667 Jy ! Component: 2200 - total flux cleaned = -0.0024132 Jy ! Component: 2250 - total flux cleaned = -0.00250862 Jy ! Component: 2300 - total flux cleaned = -0.0026029 Jy ! Component: 2350 - total flux cleaned = -0.00260292 Jy ! Component: 2400 - total flux cleaned = -0.00275788 Jy ! Component: 2450 - total flux cleaned = -0.00281934 Jy ! Component: 2500 - total flux cleaned = -0.00284987 Jy ! Component: 2550 - total flux cleaned = -0.00297122 Jy ! Component: 2600 - total flux cleaned = -0.00297133 Jy ! Component: 2650 - total flux cleaned = -0.00303064 Jy ! Component: 2700 - total flux cleaned = -0.00308972 Jy ! Component: 2750 - total flux cleaned = -0.00326605 Jy ! Component: 2800 - total flux cleaned = -0.00323685 Jy ! Component: 2850 - total flux cleaned = -0.00335288 Jy ! Component: 2900 - total flux cleaned = -0.00341052 Jy ! Component: 2950 - total flux cleaned = -0.00346764 Jy ! Component: 3000 - total flux cleaned = -0.00352457 Jy ! Component: 3050 - total flux cleaned = -0.0036932 Jy ! Component: 3100 - total flux cleaned = -0.00363728 Jy ! Component: 3150 - total flux cleaned = -0.00366505 Jy ! Component: 3200 - total flux cleaned = -0.00366497 Jy ! Component: 3250 - total flux cleaned = -0.00374736 Jy ! Component: 3300 - total flux cleaned = -0.00380163 Jy ! Component: 3350 - total flux cleaned = -0.00374739 Jy ! Component: 3400 - total flux cleaned = -0.00382793 Jy ! Component: 3450 - total flux cleaned = -0.00377442 Jy ! Component: 3500 - total flux cleaned = -0.0038541 Jy ! Component: 3550 - total flux cleaned = -0.00382783 Jy ! Component: 3600 - total flux cleaned = -0.00393268 Jy ! Component: 3650 - total flux cleaned = -0.00393272 Jy ! Component: 3700 - total flux cleaned = -0.00401035 Jy ! Component: 3750 - total flux cleaned = -0.00406174 Jy ! Component: 3800 - total flux cleaned = -0.00403616 Jy ! Component: 3850 - total flux cleaned = -0.0041379 Jy ! Component: 3900 - total flux cleaned = -0.00413772 Jy ! Component: 3950 - total flux cleaned = -0.00421317 Jy ! Component: 4000 - total flux cleaned = -0.00431291 Jy ! Component: 4050 - total flux cleaned = -0.00428816 Jy ! Total flux subtracted in 4096 components = -0.00438671 Jy ! Clean residual min=-0.001684 max=0.001253 Jy/beam ! Clean residual mean=-0.000016 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.196832 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 321 components and 0.196832 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0049+5128_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.295 x 5.265 at -51.86 degrees (North through East) ! Clean map min=-0.0030259 max=0.19626 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0049+5128_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.196259 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000427801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.653932 0.653932 1.30786 2.61573 5.23146 10.4629 20.9258 41.8517 83.7033 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.196 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 458.763 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0049+5128_S_uvs.log closed on Sat Nov 29 13:48:19 2014