! Started logfile: /d2/scr/pima/rv101_uvs/J0010+1058_X_uvs.log on Sat Nov 29 16:27:31 2014 obs /d2/scr/pima/rv101_uvs/J0010+1058_X_uva.fits ! Reading UV FITS file: /d2/scr/pima/rv101_uvs/J0010+1058_X_uva.fits ! AN table 1: 76 integrations on 15 of 15 possible baselines. ! AN table 2: 138 integrations on 28 of 28 possible baselines. ! AN table 3: 54 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.908113 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 22296 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/rv101_uvs/J0010+1058_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 241 telescope corrections were flagged in sub-array 2. ! A total of 70 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 241 telescope corrections were flagged in sub-array 2. ! A total of 70 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 241 telescope corrections were flagged in sub-array 2. ! A total of 70 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! A total of 241 telescope corrections were flagged in sub-array 2. ! A total of 70 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.042836Jy sigma=17.273255 ! Fit after self-cal, rms=0.720156Jy sigma=11.787183 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.959 mas, bpa=32.58 degrees ! Estimated noise=0.600823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229672 Jy ! Component: 100 - total flux cleaned = 0.279756 Jy ! Total flux subtracted in 100 components = 0.279756 Jy ! Clean residual min=-0.006827 max=0.013974 Jy/beam ! Clean residual mean=0.000005 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.279756 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.279756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126455Jy sigma=1.848540 ! Fit after self-cal, rms=0.126417Jy sigma=1.848334 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111356 Jy ! Component: 100 - total flux cleaned = 0.0158352 Jy ! Total flux subtracted in 100 components = 0.0158352 Jy ! Clean residual min=-0.006761 max=0.006393 Jy/beam ! Clean residual mean=0.000004 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.295591 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.295591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125696Jy sigma=1.825177 ! Fit after self-cal, rms=0.125713Jy sigma=1.825134 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=2.193 mas, bpa=27.39 degrees ! Estimated noise=0.339997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695771 Jy ! Component: 100 - total flux cleaned = 0.00966205 Jy ! Component: 150 - total flux cleaned = 0.0110888 Jy ! Component: 200 - total flux cleaned = 0.011789 Jy ! Total flux subtracted in 200 components = 0.011789 Jy ! Clean residual min=-0.004788 max=0.006909 Jy/beam ! Clean residual mean=0.000007 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.30738 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.30738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125130Jy sigma=1.818958 ! Fit after self-cal, rms=0.125126Jy sigma=1.818009 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.263 x 2.193 at 27.39 degrees (North through East) ! Clean map min=-0.0044295 max=0.29247 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.11 LA 1.05 NL 0.96 ! PT 1.05 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.97 KP 1.00* LA 1.03 ! NL 0.96 OV 0.99 PT 1.02 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.93 KP 1.00* LA 1.02 ! NL 0.93 OV 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.13 LA 1.00 NL 0.99 ! PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.01 KP 1.00* LA 1.00 ! NL 0.97 OV 0.95 PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.97 KP 1.00* LA 0.94 ! NL 0.96 OV 0.94 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* NL 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.08 KP 1.00* LA 1.05 ! NL 0.99 OV 1.02 PT 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 1.03 KP 1.00* LA 1.03 ! NL 0.97 OV 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* LA 1.00* NL 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.09 KP 1.00* LA 1.03 ! NL 1.02 OV 0.98 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.02 KP 1.00* LA 0.97 ! NL 1.01 OV 0.97 SC 1.05 ! ! ! Fit before self-cal, rms=0.125126Jy sigma=1.818009 ! Fit after self-cal, rms=0.125816Jy sigma=1.798383 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.2 mas, bpa=27.22 degrees ! Estimated noise=0.337097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308813 Jy ! Component: 100 - total flux cleaned = -0.00044615 Jy ! Component: 150 - total flux cleaned = -0.000500328 Jy ! Component: 200 - total flux cleaned = -0.000404634 Jy ! Total flux subtracted in 200 components = -0.000404634 Jy ! Clean residual min=-0.003289 max=0.003748 Jy/beam ! Clean residual mean=0.000005 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.306975 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.306975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125714Jy sigma=1.797683 ! Fit after self-cal, rms=0.125767Jy sigma=1.797480 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125767Jy sigma=1.797480 ! Fit after self-cal, rms=0.125927Jy sigma=1.794960 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.2 mas, bpa=27.16 degrees ! Estimated noise=0.336211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000664868 Jy ! Component: 100 - total flux cleaned = -0.000458127 Jy ! Component: 150 - total flux cleaned = -0.000349677 Jy ! Component: 200 - total flux cleaned = -0.000285599 Jy ! Total flux subtracted in 200 components = -0.000285599 Jy ! Clean residual min=-0.003147 max=0.003133 Jy/beam ! Clean residual mean=0.000006 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.30669 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.30669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125881Jy sigma=1.794695 ! Fit after self-cal, rms=0.125895Jy sigma=1.794680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.77873e-05 Jy ! Component: 100 - total flux cleaned = 0.000156808 Jy ! Component: 150 - total flux cleaned = 0.000212719 Jy ! Component: 200 - total flux cleaned = 0.000293553 Jy ! Total flux subtracted in 200 components = 0.000293553 Jy ! Clean residual min=-0.003142 max=0.003133 Jy/beam ! Clean residual mean=0.000005 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.306983 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.306983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125877Jy sigma=1.794550 ! Fit after self-cal, rms=0.125878Jy sigma=1.794546 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125878Jy sigma=1.794546 ! Fit after self-cal, rms=0.127468Jy sigma=1.792194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.199 mas, bpa=27.08 degrees ! Estimated noise=0.335579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22076e-05 Jy ! Component: 100 - total flux cleaned = 0.000149255 Jy ! Component: 150 - total flux cleaned = 0.000182219 Jy ! Component: 200 - total flux cleaned = 0.000265897 Jy ! Total flux subtracted in 200 components = 0.000265897 Jy ! Clean residual min=-0.002936 max=0.002649 Jy/beam ! Clean residual mean=0.000006 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.307249 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.307249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127441Jy sigma=1.791723 ! Fit after self-cal, rms=0.127472Jy sigma=1.791665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257488 Jy ! Component: 100 - total flux cleaned = 0.000351417 Jy ! Component: 150 - total flux cleaned = 0.00041508 Jy ! Component: 200 - total flux cleaned = 0.000454994 Jy ! Total flux subtracted in 200 components = 0.000454994 Jy ! Clean residual min=-0.002971 max=0.002648 Jy/beam ! Clean residual mean=0.000006 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.307704 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.307704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127464Jy sigma=1.791526 ! Fit after self-cal, rms=0.127463Jy sigma=1.791515 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127463Jy sigma=1.791515 ! Fit after self-cal, rms=0.127417Jy sigma=1.791401 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=3.098 mas, bpa=2.108 degrees ! Estimated noise=0.390894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045905 Jy ! Component: 100 - total flux cleaned = -0.000459151 Jy ! Component: 150 - total flux cleaned = -0.00047818 Jy ! Component: 200 - total flux cleaned = -0.000478995 Jy ! Total flux subtracted in 200 components = -0.000478995 Jy ! Clean residual min=-0.002715 max=0.002762 Jy/beam ! Clean residual mean=0.000010 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.307225 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.307225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127405Jy sigma=1.791357 ! Fit after self-cal, rms=0.127409Jy sigma=1.791340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4609e-06 Jy ! Component: 100 - total flux cleaned = 3.30503e-07 Jy ! Component: 150 - total flux cleaned = -7.64157e-08 Jy ! Component: 200 - total flux cleaned = -8.81105e-07 Jy ! Total flux subtracted in 200 components = -8.81105e-07 Jy ! Clean residual min=-0.002699 max=0.002768 Jy/beam ! Clean residual mean=0.000010 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.307224 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.307224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127404Jy sigma=1.791313 ! Fit after self-cal, rms=0.127404Jy sigma=1.791311 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.199 mas, bpa=27.03 degrees ! Estimated noise=0.33472 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.265 x 2.199 at 27.03 degrees (North through East) ! Clean map min=-0.0027968 max=0.28779 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.957 mas, bpa=32.17 degrees ! Estimated noise=0.593439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226783 Jy ! Component: 100 - total flux cleaned = 0.276236 Jy ! Component: 150 - total flux cleaned = 0.287557 Jy ! Component: 200 - total flux cleaned = 0.29246 Jy ! Total flux subtracted in 200 components = 0.29246 Jy ! Clean residual min=-0.004784 max=0.004804 Jy/beam ! Clean residual mean=0.000005 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.29246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.29246 Jy ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.199 mas, bpa=27.03 degrees ! Estimated noise=0.33472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388653 Jy ! Component: 100 - total flux cleaned = 0.00641918 Jy ! Component: 150 - total flux cleaned = 0.00836526 Jy ! Component: 200 - total flux cleaned = 0.00968657 Jy ! Total flux subtracted in 200 components = 0.00968657 Jy ! Clean residual min=-0.003336 max=0.002956 Jy/beam ! Clean residual mean=0.000008 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.302147 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 0.302147 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=3.098 mas, bpa=2.108 degrees ! Estimated noise=0.390894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179653 Jy ! Component: 100 - total flux cleaned = 0.00243357 Jy ! Component: 150 - total flux cleaned = 0.00274694 Jy ! Component: 200 - total flux cleaned = 0.00294718 Jy ! Total flux subtracted in 200 components = 0.00294718 Jy ! Clean residual min=-0.003113 max=0.003084 Jy/beam ! Clean residual mean=0.000011 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.305094 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215858 Jy ! Component: 100 - total flux cleaned = 0.000378278 Jy ! Component: 150 - total flux cleaned = 0.000559184 Jy ! Component: 200 - total flux cleaned = 0.000724346 Jy ! Total flux subtracted in 200 components = 0.000724346 Jy ! Clean residual min=-0.002985 max=0.002986 Jy/beam ! Clean residual mean=0.000011 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.305818 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.305818 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=2.199 mas, bpa=27.03 degrees ! Estimated noise=0.33472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244628 Jy ! Component: 100 - total flux cleaned = 0.00024849 Jy ! Component: 150 - total flux cleaned = 0.000307344 Jy ! Component: 200 - total flux cleaned = 0.000360925 Jy ! Total flux subtracted in 200 components = 0.000360925 Jy ! Clean residual min=-0.003061 max=0.002714 Jy/beam ! Clean residual mean=0.000007 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.306179 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.306179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127440Jy sigma=1.791510 ! Fit after self-cal, rms=0.127430Jy sigma=1.791449 wmodel /d2/scr/pima/rv101_uvs/J0010+1058_X_map.mod ! Writing 69 model components to file: /d2/scr/pima/rv101_uvs/J0010+1058_X_map.mod wobs /d2/scr/pima/rv101_uvs/J0010+1058_X_uvs.fits ! Writing UV FITS file: /d2/scr/pima/rv101_uvs/J0010+1058_X_uvs.fits wwins /d2/scr/pima/rv101_uvs/J0010+1058_X_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/rv101_uvs/J0010+1058_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103658 Jy ! Component: 100 - total flux cleaned = -0.00161325 Jy ! Component: 150 - total flux cleaned = -0.00170344 Jy ! Component: 200 - total flux cleaned = -0.0019163 Jy ! Component: 250 - total flux cleaned = -0.0021204 Jy ! Component: 300 - total flux cleaned = -0.00219988 Jy ! Component: 350 - total flux cleaned = -0.00227716 Jy ! Component: 400 - total flux cleaned = -0.00242629 Jy ! Component: 450 - total flux cleaned = -0.00238901 Jy ! Component: 500 - total flux cleaned = -0.00242563 Jy ! Component: 550 - total flux cleaned = -0.00253152 Jy ! Component: 600 - total flux cleaned = -0.00249697 Jy ! Component: 650 - total flux cleaned = -0.00249745 Jy ! Component: 700 - total flux cleaned = -0.00259816 Jy ! Component: 750 - total flux cleaned = -0.00263074 Jy ! Component: 800 - total flux cleaned = -0.00272702 Jy ! Component: 850 - total flux cleaned = -0.00272685 Jy ! Component: 900 - total flux cleaned = -0.00269557 Jy ! Component: 950 - total flux cleaned = -0.00275701 Jy ! Component: 1000 - total flux cleaned = -0.00269599 Jy ! Component: 1050 - total flux cleaned = -0.00281634 Jy ! Component: 1100 - total flux cleaned = -0.00272717 Jy ! Component: 1150 - total flux cleaned = -0.00281477 Jy ! Component: 1200 - total flux cleaned = -0.00275725 Jy ! Component: 1250 - total flux cleaned = -0.0027856 Jy ! Component: 1300 - total flux cleaned = -0.00278563 Jy ! Component: 1350 - total flux cleaned = -0.00284126 Jy ! Component: 1400 - total flux cleaned = -0.00281354 Jy ! Component: 1450 - total flux cleaned = -0.00286794 Jy ! Component: 1500 - total flux cleaned = -0.00281402 Jy ! Component: 1550 - total flux cleaned = -0.00289351 Jy ! Component: 1600 - total flux cleaned = -0.00278891 Jy ! Component: 1650 - total flux cleaned = -0.00281522 Jy ! Component: 1700 - total flux cleaned = -0.00281523 Jy ! Component: 1750 - total flux cleaned = -0.00271387 Jy ! Component: 1800 - total flux cleaned = -0.00271381 Jy ! Component: 1850 - total flux cleaned = -0.00266403 Jy ! Component: 1900 - total flux cleaned = -0.00261463 Jy ! Component: 1950 - total flux cleaned = -0.00256579 Jy ! Component: 2000 - total flux cleaned = -0.00249328 Jy ! Component: 2050 - total flux cleaned = -0.00234994 Jy ! Component: 2100 - total flux cleaned = -0.00232626 Jy ! Component: 2150 - total flux cleaned = -0.00227962 Jy ! Component: 2200 - total flux cleaned = -0.00220957 Jy ! Component: 2250 - total flux cleaned = -0.0021403 Jy ! Component: 2300 - total flux cleaned = -0.00202637 Jy ! Component: 2350 - total flux cleaned = -0.00200366 Jy ! Component: 2400 - total flux cleaned = -0.00193672 Jy ! Component: 2450 - total flux cleaned = -0.00189218 Jy ! Component: 2500 - total flux cleaned = -0.00182605 Jy ! Component: 2550 - total flux cleaned = -0.00180433 Jy ! Component: 2600 - total flux cleaned = -0.00171784 Jy ! Component: 2650 - total flux cleaned = -0.00169649 Jy ! Component: 2700 - total flux cleaned = -0.00163266 Jy ! Component: 2750 - total flux cleaned = -0.00159023 Jy ! Component: 2800 - total flux cleaned = -0.00159028 Jy ! Component: 2850 - total flux cleaned = -0.00154865 Jy ! Component: 2900 - total flux cleaned = -0.00154862 Jy ! Component: 2950 - total flux cleaned = -0.00150733 Jy ! Component: 3000 - total flux cleaned = -0.00148671 Jy ! Component: 3050 - total flux cleaned = -0.00144601 Jy ! Component: 3100 - total flux cleaned = -0.00142586 Jy ! Component: 3150 - total flux cleaned = -0.00128636 Jy ! Component: 3200 - total flux cleaned = -0.00132604 Jy ! Component: 3250 - total flux cleaned = -0.00126696 Jy ! Component: 3300 - total flux cleaned = -0.00122786 Jy ! Component: 3350 - total flux cleaned = -0.00124708 Jy ! Component: 3400 - total flux cleaned = -0.00118922 Jy ! Component: 3450 - total flux cleaned = -0.00116993 Jy ! Component: 3500 - total flux cleaned = -0.00111273 Jy ! Component: 3550 - total flux cleaned = -0.00111261 Jy ! Component: 3600 - total flux cleaned = -0.00107491 Jy ! Component: 3650 - total flux cleaned = -0.00107485 Jy ! Component: 3700 - total flux cleaned = -0.00105616 Jy ! Component: 3750 - total flux cleaned = -0.00103766 Jy ! Component: 3800 - total flux cleaned = -0.00101934 Jy ! Component: 3850 - total flux cleaned = -0.00101918 Jy ! Component: 3900 - total flux cleaned = -0.00103726 Jy ! Component: 3950 - total flux cleaned = -0.00100112 Jy ! Component: 4000 - total flux cleaned = -0.000983191 Jy ! Component: 4050 - total flux cleaned = -0.000983264 Jy ! Total flux subtracted in 4096 components = -0.000983166 Jy ! Clean residual min=-0.000955 max=0.001017 Jy/beam ! Clean residual mean=0.000002 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.305196 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 359 components and 0.305196 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/rv101_uvs/J0010+1058_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.265 x 2.199 at 27.03 degrees (North through East) ! Clean map min=-0.0031775 max=0.28783 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/rv101_uvs/J0010+1058_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319572 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333079 0.333079 0.666157 1.33231 2.66463 5.32926 10.6585 21.317 42.6341 85.2681 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.287 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 900.688 quit ! Quitting program ! Log file /d2/scr/pima/rv101_uvs/J0010+1058_X_uvs.log closed on Sat Nov 29 16:27:36 2014