! Started logfile: /scr/pima/rv100_uvs/J2038+5119_X_uvs.log on Mon Feb 29 13:29:22 2016
obs /scr/pima/rv100_uvs/J2038+5119_X_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J2038+5119_X_uva.fits
! AN table 1: 38 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.190431 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2038+5119
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 1592 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J2038+5119_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 276 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 292 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 318 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 318 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.635606Jy  sigma=12.211534
! Fit after  self-cal, rms=1.439684Jy  sigma=6.748972
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.7012 mas, bmaj=0.7366 mas, bpa=6.686 degrees
! Estimated noise=5.40958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75141 Jy
! Component: 100  -  total flux cleaned = 2.18529 Jy
! Total flux subtracted in 100 components = 2.18529 Jy
! Clean residual min=-0.059945 max=0.185459 Jy/beam
! Clean residual mean=0.001810 rms=0.015578 Jy/beam
! Combined flux in latest and established models = 2.18529 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 2.18529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.454437Jy  sigma=2.014891
! Fit after  self-cal, rms=0.454032Jy  sigma=2.013629
! Inverting map 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212867 Jy
! Component: 100  -  total flux cleaned = 0.33757 Jy
! Total flux subtracted in 100 components = 0.33757 Jy
! Clean residual min=-0.036258 max=0.063426 Jy/beam
! Clean residual mean=0.001157 rms=0.008976 Jy/beam
! Combined flux in latest and established models = 2.52286 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 2.52286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.290385Jy  sigma=1.192371
! Fit after  self-cal, rms=0.288386Jy  sigma=1.185277
! Inverting map 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0798116 Jy
! Component: 100  -  total flux cleaned = 0.127617 Jy
! Total flux subtracted in 100 components = 0.127617 Jy
! Clean residual min=-0.032176 max=0.043632 Jy/beam
! Clean residual mean=0.000910 rms=0.007580 Jy/beam
! Combined flux in latest and established models = 2.65048 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 2.65048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.254509Jy  sigma=1.020761
! Fit after  self-cal, rms=0.253394Jy  sigma=1.016156
! Inverting map 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.85 mas, bmaj=0.8876 mas, bpa=-32.44 degrees
! Estimated noise=4.66135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745133 Jy
! Component: 100  -  total flux cleaned = 0.126506 Jy
! Component: 150  -  total flux cleaned = 0.166294 Jy
! Component: 200  -  total flux cleaned = 0.197468 Jy
! Total flux subtracted in 200 components = 0.197468 Jy
! Clean residual min=-0.027808 max=0.045963 Jy/beam
! Clean residual mean=0.002797 rms=0.008104 Jy/beam
! Combined flux in latest and established models = 2.84795 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 43 components and 2.84795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218485Jy  sigma=0.864605
! Fit after  self-cal, rms=0.215367Jy  sigma=0.850141
! Inverting map 
! Your choice of large map pixels excluded 0.471% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.85 x 0.8876 at -32.44 degrees (North through East)
! Clean map  min=-0.023431  max=2.3202 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        0.98     LA        1.00     MA        1.06     
!   MK        1.02     NL        0.99     NY        0.96     OV        1.04     
!   PT        0.97     SC        0.99     WF        1.02     
! 
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00     KP        0.98     LA        1.00     MA        1.06     
!   MK        1.00     NL        0.99     NY        0.97     OV        1.09     
!   PT        0.97     SC        1.00*    WF        0.99     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.99     KP        0.97     LA        0.99     MA        1.12     
!   MK        1.01     NL        0.99     NY        1.00*    OV        1.04     
!   PT        0.97     SC        0.93     WF        1.01     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        0.97     LA        1.01     MA        1.11     
!   MK        1.01     NL        0.97     NY        1.00*    OV        1.07     
!   PT        0.97     SC        0.99     WF        0.97     
! 
! 
! Fit before self-cal, rms=0.215367Jy  sigma=0.850141
! Fit after  self-cal, rms=0.206578Jy  sigma=0.734285
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8884 mas, bmaj=0.9185 mas, bpa=-18.34 degrees
! Estimated noise=4.80439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381393 Jy
! Component: 100  -  total flux cleaned = 0.0630158 Jy
! Component: 150  -  total flux cleaned = 0.0781438 Jy
! Component: 200  -  total flux cleaned = 0.0875087 Jy
! Total flux subtracted in 200 components = 0.0875087 Jy
! Clean residual min=-0.021924 max=0.031019 Jy/beam
! Clean residual mean=0.001805 rms=0.006207 Jy/beam
! Combined flux in latest and established models = 2.93545 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 2.93545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193779Jy  sigma=0.692969
! Fit after  self-cal, rms=0.193228Jy  sigma=0.689462
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193228Jy  sigma=0.689462
! Fit after  self-cal, rms=0.144527Jy  sigma=0.542172
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8875 mas, bmaj=0.9215 mas, bpa=-18.97 degrees
! Estimated noise=4.816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176884 Jy
! Component: 100  -  total flux cleaned = 0.0303088 Jy
! Component: 150  -  total flux cleaned = 0.0362738 Jy
! Component: 200  -  total flux cleaned = 0.040277 Jy
! Total flux subtracted in 200 components = 0.040277 Jy
! Clean residual min=-0.015249 max=0.026164 Jy/beam
! Clean residual mean=0.001852 rms=0.004207 Jy/beam
! Combined flux in latest and established models = 2.97573 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 2.97573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140626Jy  sigma=0.527979
! Fit after  self-cal, rms=0.140159Jy  sigma=0.526680
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026359 Jy
! Component: 100  -  total flux cleaned = 0.0409961 Jy
! Component: 150  -  total flux cleaned = 0.0461999 Jy
! Component: 200  -  total flux cleaned = 0.0484761 Jy
! Total flux subtracted in 200 components = 0.0484761 Jy
! Clean residual min=-0.015338 max=0.017221 Jy/beam
! Clean residual mean=0.001420 rms=0.003529 Jy/beam
! Combined flux in latest and established models = 3.02421 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 106 components and 3.02421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133156Jy  sigma=0.504211
! Fit after  self-cal, rms=0.132583Jy  sigma=0.500308
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-13.6, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164012 Jy
! Component: 100  -  total flux cleaned = 0.0224471 Jy
! Component: 150  -  total flux cleaned = 0.0243862 Jy
! Component: 200  -  total flux cleaned = 0.0258075 Jy
! Total flux subtracted in 200 components = 0.0258075 Jy
! Clean residual min=-0.014105 max=0.015048 Jy/beam
! Clean residual mean=0.001201 rms=0.003242 Jy/beam
! Combined flux in latest and established models = 3.05001 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 123 components and 3.05001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129222Jy  sigma=0.490366
! Fit after  self-cal, rms=0.129111Jy  sigma=0.489242
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-12.8, -18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143005 Jy
! Component: 100  -  total flux cleaned = 0.0221336 Jy
! Component: 150  -  total flux cleaned = 0.025022 Jy
! Component: 200  -  total flux cleaned = 0.0268326 Jy
! Total flux subtracted in 200 components = 0.0268326 Jy
! Clean residual min=-0.012970 max=0.013699 Jy/beam
! Clean residual mean=0.001007 rms=0.003007 Jy/beam
! Combined flux in latest and established models = 3.07685 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 146 components and 3.07685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126235Jy  sigma=0.481698
! Fit after  self-cal, rms=0.126235Jy  sigma=0.480641
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-4, -7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012032 Jy
! Component: 100  -  total flux cleaned = 0.0129613 Jy
! Component: 150  -  total flux cleaned = 0.0140109 Jy
! Component: 200  -  total flux cleaned = 0.0149614 Jy
! Total flux subtracted in 200 components = 0.0149614 Jy
! Clean residual min=-0.012143 max=0.012237 Jy/beam
! Clean residual mean=0.000883 rms=0.002857 Jy/beam
! Combined flux in latest and established models = 3.09181 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 158 components and 3.09181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124324Jy  sigma=0.473603
! Fit after  self-cal, rms=0.124213Jy  sigma=0.472827
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124213Jy  sigma=0.472827
! Fit after  self-cal, rms=0.116689Jy  sigma=0.437306
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8872 mas, bmaj=0.9211 mas, bpa=-19.48 degrees
! Estimated noise=4.81606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415912 Jy
! Component: 100  -  total flux cleaned = 0.00722878 Jy
! Component: 150  -  total flux cleaned = 0.0103114 Jy
! Component: 200  -  total flux cleaned = 0.0116845 Jy
! Total flux subtracted in 200 components = 0.0116845 Jy
! Clean residual min=-0.008632 max=0.012085 Jy/beam
! Clean residual mean=0.000777 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 3.10349 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 172 components and 3.10349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115613Jy  sigma=0.433140
! Fit after  self-cal, rms=0.115538Jy  sigma=0.432814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.4, -5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00803064 Jy
! Component: 100  -  total flux cleaned = 0.0093048 Jy
! Component: 150  -  total flux cleaned = 0.0102362 Jy
! Component: 200  -  total flux cleaned = 0.010931 Jy
! Total flux subtracted in 200 components = 0.010931 Jy
! Clean residual min=-0.008353 max=0.009570 Jy/beam
! Clean residual mean=0.000682 rms=0.002141 Jy/beam
! Combined flux in latest and established models = 3.11442 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 187 components and 3.11442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114235Jy  sigma=0.428377
! Fit after  self-cal, rms=0.114149Jy  sigma=0.428002
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-21, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536285 Jy
! Component: 100  -  total flux cleaned = 0.00497921 Jy
! Component: 150  -  total flux cleaned = 0.00516323 Jy
! Component: 200  -  total flux cleaned = 0.00567786 Jy
! Total flux subtracted in 200 components = 0.00567786 Jy
! Clean residual min=-0.008743 max=0.008457 Jy/beam
! Clean residual mean=0.000636 rms=0.002041 Jy/beam
! Combined flux in latest and established models = 3.1201 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 199 components and 3.1201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113168Jy  sigma=0.423847
! Fit after  self-cal, rms=0.113050Jy  sigma=0.423604
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113050Jy  sigma=0.423604
! Fit after  self-cal, rms=0.112723Jy  sigma=0.421864
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=2.036 mas, bmaj=3.335 mas, bpa=-81.65 degrees
! Estimated noise=6.83312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0086408 Jy
! Component: 100  -  total flux cleaned = 0.0129049 Jy
! Component: 150  -  total flux cleaned = 0.0147863 Jy
! Component: 200  -  total flux cleaned = 0.01625 Jy
! Total flux subtracted in 200 components = 0.01625 Jy
! Clean residual min=-0.009437 max=0.011041 Jy/beam
! Clean residual mean=0.001327 rms=0.003021 Jy/beam
! Combined flux in latest and established models = 3.13635 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 212 components and 3.13635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112244Jy  sigma=0.420836
! Fit after  self-cal, rms=0.112082Jy  sigma=0.420359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164013 Jy
! Component: 100  -  total flux cleaned = 0.00265993 Jy
! Component: 150  -  total flux cleaned = 0.00358561 Jy
! Component: 200  -  total flux cleaned = 0.00443754 Jy
! Total flux subtracted in 200 components = 0.00443754 Jy
! Clean residual min=-0.009195 max=0.010962 Jy/beam
! Clean residual mean=0.001229 rms=0.002940 Jy/beam
! Combined flux in latest and established models = 3.14079 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 218 components and 3.14079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111872Jy  sigma=0.420008
! Fit after  self-cal, rms=0.111761Jy  sigma=0.419757
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8871 mas, bmaj=0.9208 mas, bpa=-19.92 degrees
! Estimated noise=4.81639 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8871 x 0.9208 at -19.92 degrees (North through East)
! Clean map  min=-0.0067183  max=2.3203 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111761Jy  sigma=0.419757
! Fit after  self-cal, rms=0.097828Jy  sigma=0.345128
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8867 mas, bmaj=0.9207 mas, bpa=-19.55 degrees
! Estimated noise=4.81957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273443 Jy
! Component: 100  -  total flux cleaned = 0.00307683 Jy
! Component: 150  -  total flux cleaned = 0.00323404 Jy
! Component: 200  -  total flux cleaned = 0.00366689 Jy
! Total flux subtracted in 200 components = 0.00366689 Jy
! Clean residual min=-0.007504 max=0.007932 Jy/beam
! Clean residual mean=0.000469 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 3.14446 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 233 components and 3.14446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097269Jy  sigma=0.342565
! Fit after  self-cal, rms=0.097238Jy  sigma=0.342504
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-17, -40.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643535 Jy
! Component: 100  -  total flux cleaned = 0.00802701 Jy
! Component: 150  -  total flux cleaned = 0.0090088 Jy
! Component: 200  -  total flux cleaned = 0.00927916 Jy
! Total flux subtracted in 200 components = 0.00927916 Jy
! Clean residual min=-0.007113 max=0.007479 Jy/beam
! Clean residual mean=0.000442 rms=0.001807 Jy/beam
! Combined flux in latest and established models = 3.15374 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 248 components and 3.15374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096502Jy  sigma=0.338834
! Fit after  self-cal, rms=0.096483Jy  sigma=0.338638
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096483Jy  sigma=0.338638
! Fit after  self-cal, rms=0.096416Jy  sigma=0.338184
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.7237 mas, bmaj=0.7834 mas, bpa=19.52 degrees
! Estimated noise=5.58653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75827 Jy
! Component: 100  -  total flux cleaned = 2.18886 Jy
! Component: 150  -  total flux cleaned = 2.39308 Jy
! Component: 200  -  total flux cleaned = 2.51215 Jy
! Total flux subtracted in 200 components = 2.51215 Jy
! Clean residual min=-0.027888 max=0.061001 Jy/beam
! Clean residual mean=0.001336 rms=0.006890 Jy/beam
! Combined flux in latest and established models = 2.51215 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 2.51215 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8867 mas, bmaj=0.9205 mas, bpa=-19.71 degrees
! Estimated noise=4.82034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111956 Jy
! Component: 100  -  total flux cleaned = 0.192194 Jy
! Component: 150  -  total flux cleaned = 0.254446 Jy
! Component: 200  -  total flux cleaned = 0.304244 Jy
! Total flux subtracted in 200 components = 0.304244 Jy
! Clean residual min=-0.017442 max=0.035875 Jy/beam
! Clean residual mean=0.003345 rms=0.006404 Jy/beam
! Combined flux in latest and established models = 2.8164 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 62 components and 2.8164 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-5.6, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0420831 Jy
! Component: 100  -  total flux cleaned = 0.0764874 Jy
! Component: 150  -  total flux cleaned = 0.105812 Jy
! Component: 200  -  total flux cleaned = 0.131027 Jy
! Total flux subtracted in 200 components = 0.131027 Jy
! Clean residual min=-0.011334 max=0.018527 Jy/beam
! Clean residual mean=0.002167 rms=0.004046 Jy/beam
! Combined flux in latest and established models = 2.94742 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 91 components and 2.94742 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-2.2, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223798 Jy
! Component: 100  -  total flux cleaned = 0.0416755 Jy
! Component: 150  -  total flux cleaned = 0.0587034 Jy
! Component: 200  -  total flux cleaned = 0.0738466 Jy
! Total flux subtracted in 200 components = 0.0738466 Jy
! Clean residual min=-0.009133 max=0.013987 Jy/beam
! Clean residual mean=0.001520 rms=0.002954 Jy/beam
! Combined flux in latest and established models = 3.02127 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 125 components and 3.02127 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Added new window around map position (-16.8, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147834 Jy
! Component: 100  -  total flux cleaned = 0.0272203 Jy
! Component: 150  -  total flux cleaned = 0.038485 Jy
! Component: 200  -  total flux cleaned = 0.0487391 Jy
! Total flux subtracted in 200 components = 0.0487391 Jy
! Clean residual min=-0.008339 max=0.009884 Jy/beam
! Clean residual mean=0.001120 rms=0.002363 Jy/beam
! Combined flux in latest and established models = 3.07001 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 152 components and 3.07001 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=2.035 mas, bmaj=3.334 mas, bpa=-81.63 degrees
! Estimated noise=6.84243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196762 Jy
! Component: 100  -  total flux cleaned = 0.0345343 Jy
! Component: 150  -  total flux cleaned = 0.0463575 Jy
! Component: 200  -  total flux cleaned = 0.0560779 Jy
! Total flux subtracted in 200 components = 0.0560779 Jy
! Clean residual min=-0.008532 max=0.012305 Jy/beam
! Clean residual mean=0.001751 rms=0.003087 Jy/beam
! Combined flux in latest and established models = 3.12609 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0081775 Jy
! Component: 100  -  total flux cleaned = 0.0150957 Jy
! Component: 150  -  total flux cleaned = 0.0209711 Jy
! Component: 200  -  total flux cleaned = 0.0260001 Jy
! Total flux subtracted in 200 components = 0.0260001 Jy
! Clean residual min=-0.007263 max=0.010441 Jy/beam
! Clean residual mean=0.001239 rms=0.002579 Jy/beam
! Combined flux in latest and established models = 3.15209 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 215 components and 3.15209 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! Estimated beam: bmin=0.8867 mas, bmaj=0.9205 mas, bpa=-19.71 degrees
! Estimated noise=4.82034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000842634 Jy
! Component: 100  -  total flux cleaned = 0.00199837 Jy
! Component: 150  -  total flux cleaned = 0.00360842 Jy
! Component: 200  -  total flux cleaned = 0.00510983 Jy
! Total flux subtracted in 200 components = 0.00510983 Jy
! Clean residual min=-0.007190 max=0.008294 Jy/beam
! Clean residual mean=0.000433 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 3.1572 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 232 components and 3.1572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096736Jy  sigma=0.342636
! Fit after  self-cal, rms=0.096072Jy  sigma=0.339627
wmodel /scr/pima/rv100_uvs/J2038+5119_X_map.mod
! Writing 232 model components to file: /scr/pima/rv100_uvs/J2038+5119_X_map.mod
wobs /scr/pima/rv100_uvs/J2038+5119_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J2038+5119_X_uvs.fits
wwins /scr/pima/rv100_uvs/J2038+5119_X_map.win
! wwins: Wrote 13 windows to /scr/pima/rv100_uvs/J2038+5119_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347026 Jy
! Component: 100  -  total flux cleaned = 0.00615868 Jy
! Component: 150  -  total flux cleaned = 0.00809257 Jy
! Component: 200  -  total flux cleaned = 0.00946444 Jy
! Component: 250  -  total flux cleaned = 0.011043 Jy
! Component: 300  -  total flux cleaned = 0.012701 Jy
! Component: 350  -  total flux cleaned = 0.0142061 Jy
! Component: 400  -  total flux cleaned = 0.0155669 Jy
! Component: 450  -  total flux cleaned = 0.0169019 Jy
! Component: 500  -  total flux cleaned = 0.0182096 Jy
! Component: 550  -  total flux cleaned = 0.019386 Jy
! Component: 600  -  total flux cleaned = 0.0205412 Jy
! Component: 650  -  total flux cleaned = 0.0213692 Jy
! Component: 700  -  total flux cleaned = 0.0223887 Jy
! Component: 750  -  total flux cleaned = 0.0232921 Jy
! Component: 800  -  total flux cleaned = 0.0239851 Jy
! Component: 850  -  total flux cleaned = 0.0248645 Jy
! Component: 900  -  total flux cleaned = 0.0258279 Jy
! Component: 950  -  total flux cleaned = 0.0265883 Jy
! Component: 1000  -  total flux cleaned = 0.0275264 Jy
! Component: 1050  -  total flux cleaned = 0.0281754 Jy
! Component: 1100  -  total flux cleaned = 0.0288177 Jy
! Component: 1150  -  total flux cleaned = 0.0294524 Jy
! Component: 1200  -  total flux cleaned = 0.0304393 Jy
! Component: 1250  -  total flux cleaned = 0.0314124 Jy
! Component: 1300  -  total flux cleaned = 0.03185 Jy
! Component: 1350  -  total flux cleaned = 0.0324584 Jy
! Component: 1400  -  total flux cleaned = 0.033317 Jy
! Component: 1450  -  total flux cleaned = 0.0338257 Jy
! Component: 1500  -  total flux cleaned = 0.0344135 Jy
! Component: 1550  -  total flux cleaned = 0.0349958 Jy
! Component: 1600  -  total flux cleaned = 0.0354904 Jy
! Component: 1650  -  total flux cleaned = 0.0362241 Jy
! Component: 1700  -  total flux cleaned = 0.0366283 Jy
! Component: 1750  -  total flux cleaned = 0.0371882 Jy
! Component: 1800  -  total flux cleaned = 0.0376639 Jy
! Component: 1850  -  total flux cleaned = 0.0381351 Jy
! Component: 1900  -  total flux cleaned = 0.0386016 Jy
! Component: 1950  -  total flux cleaned = 0.039064 Jy
! Component: 2000  -  total flux cleaned = 0.0392932 Jy
! Component: 2050  -  total flux cleaned = 0.0397488 Jy
! Component: 2100  -  total flux cleaned = 0.0398993 Jy
! Component: 2150  -  total flux cleaned = 0.0404955 Jy
! Component: 2200  -  total flux cleaned = 0.0407183 Jy
! Component: 2250  -  total flux cleaned = 0.0412321 Jy
! Component: 2300  -  total flux cleaned = 0.0414501 Jy
! Component: 2350  -  total flux cleaned = 0.0417389 Jy
! Component: 2400  -  total flux cleaned = 0.042098 Jy
! Component: 2450  -  total flux cleaned = 0.0423826 Jy
! Component: 2500  -  total flux cleaned = 0.0427354 Jy
! Component: 2550  -  total flux cleaned = 0.0430856 Jy
! Component: 2600  -  total flux cleaned = 0.0435027 Jy
! Component: 2650  -  total flux cleaned = 0.0437096 Jy
! Component: 2700  -  total flux cleaned = 0.0442586 Jy
! Component: 2750  -  total flux cleaned = 0.0447345 Jy
! Component: 2800  -  total flux cleaned = 0.0448697 Jy
! Component: 2850  -  total flux cleaned = 0.0454737 Jy
! Component: 2900  -  total flux cleaned = 0.0458735 Jy
! Component: 2950  -  total flux cleaned = 0.0461383 Jy
! Component: 3000  -  total flux cleaned = 0.0462701 Jy
! Component: 3050  -  total flux cleaned = 0.0465965 Jy
! Component: 3100  -  total flux cleaned = 0.0469863 Jy
! Component: 3150  -  total flux cleaned = 0.047373 Jy
! Component: 3200  -  total flux cleaned = 0.0475649 Jy
! Component: 3250  -  total flux cleaned = 0.0475654 Jy
! Component: 3300  -  total flux cleaned = 0.0481352 Jy
! Component: 3350  -  total flux cleaned = 0.0483869 Jy
! Component: 3400  -  total flux cleaned = 0.0489491 Jy
! Component: 3450  -  total flux cleaned = 0.0488869 Jy
! Component: 3500  -  total flux cleaned = 0.0491954 Jy
! Component: 3550  -  total flux cleaned = 0.0495636 Jy
! Component: 3600  -  total flux cleaned = 0.0497461 Jy
! Component: 3650  -  total flux cleaned = 0.0498677 Jy
! Component: 3700  -  total flux cleaned = 0.0504708 Jy
! Component: 3750  -  total flux cleaned = 0.0505907 Jy
! Component: 3800  -  total flux cleaned = 0.0508886 Jy
! Component: 3850  -  total flux cleaned = 0.0508887 Jy
! Component: 3900  -  total flux cleaned = 0.0511244 Jy
! Component: 3950  -  total flux cleaned = 0.0513002 Jy
! Component: 4000  -  total flux cleaned = 0.05165 Jy
! Component: 4050  -  total flux cleaned = 0.0518236 Jy
! Total flux subtracted in 4096 components = 0.0518239 Jy
! Clean residual min=-0.003583 max=0.003303 Jy/beam
! Clean residual mean=0.000111 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 3.20902 Jy
keep
! Adding 321 model components to the UV plane model.
! The established model now contains 553 components and 3.20902 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J2038+5119_X\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8867 x 0.9205 at -19.71 degrees (North through East)
! Clean map  min=-0.0045211  max=2.3212 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J2038+5119_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.32122 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.515% of the data.
!  The x-axis pixel size should ideally be below 0.1942 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000925716 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.119642 0.119642 0.239283 0.478567 0.957134 1.91427 3.82854 7.65707 15.3141 30.6283 61.2566
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0027 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.321 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2507.49 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J2038+5119_X_uvs.log closed on Mon Feb 29 13:29:26 2016