! Started logfile: /scr/pima/rv100_uvs/J1800+7828_X_uvs.log on Mon Feb 29 13:28:51 2016 obs /scr/pima/rv100_uvs/J1800+7828_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J1800+7828_X_uva.fits ! AN table 1: 70 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.41974 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1800+7828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 6464 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1800+7828_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 385 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.833276Jy sigma=7.644840 ! Fit after self-cal, rms=0.580672Jy sigma=2.449310 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6282 mas, bmaj=0.7785 mas, bpa=-33.78 degrees ! Estimated noise=3.5662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10214 Jy ! Component: 100 - total flux cleaned = 1.35463 Jy ! Total flux subtracted in 100 components = 1.35463 Jy ! Clean residual min=-0.035315 max=0.134551 Jy/beam ! Clean residual mean=0.000119 rms=0.008374 Jy/beam ! Combined flux in latest and established models = 1.35463 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.35463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339893Jy sigma=1.405479 ! Fit after self-cal, rms=0.339510Jy sigma=1.404826 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-1.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136148 Jy ! Component: 100 - total flux cleaned = 0.220105 Jy ! Total flux subtracted in 100 components = 0.220105 Jy ! Clean residual min=-0.026556 max=0.044698 Jy/beam ! Clean residual mean=0.000086 rms=0.005622 Jy/beam ! Combined flux in latest and established models = 1.57473 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 1.57473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236607Jy sigma=0.964186 ! Fit after self-cal, rms=0.228495Jy sigma=0.938195 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706741 Jy ! Component: 100 - total flux cleaned = 0.115194 Jy ! Total flux subtracted in 100 components = 0.115194 Jy ! Clean residual min=-0.019594 max=0.028398 Jy/beam ! Clean residual mean=0.000067 rms=0.004051 Jy/beam ! Combined flux in latest and established models = 1.68993 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.68993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182064Jy sigma=0.735500 ! Fit after self-cal, rms=0.179225Jy sigma=0.726547 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386341 Jy ! Component: 100 - total flux cleaned = 0.0655833 Jy ! Total flux subtracted in 100 components = 0.0655833 Jy ! Clean residual min=-0.016397 max=0.022904 Jy/beam ! Clean residual mean=0.000057 rms=0.003405 Jy/beam ! Combined flux in latest and established models = 1.75551 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 1.75551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157828Jy sigma=0.630149 ! Fit after self-cal, rms=0.156770Jy sigma=0.626994 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-0.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258305 Jy ! Component: 100 - total flux cleaned = 0.0447396 Jy ! Total flux subtracted in 100 components = 0.0447396 Jy ! Clean residual min=-0.014249 max=0.019661 Jy/beam ! Clean residual mean=0.000050 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 1.80025 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 1.80025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144434Jy sigma=0.569645 ! Fit after self-cal, rms=0.143943Jy sigma=0.568111 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (3.4, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203192 Jy ! Component: 100 - total flux cleaned = 0.0348605 Jy ! Total flux subtracted in 100 components = 0.0348605 Jy ! Clean residual min=-0.013073 max=0.015810 Jy/beam ! Clean residual mean=0.000044 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 1.83511 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 1.83511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136603Jy sigma=0.534705 ! Fit after self-cal, rms=0.136397Jy sigma=0.533784 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7289 mas, bmaj=0.936 mas, bpa=-29.07 degrees ! Estimated noise=2.60751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460387 Jy ! Component: 100 - total flux cleaned = 0.0736572 Jy ! Component: 150 - total flux cleaned = 0.0936318 Jy ! Component: 200 - total flux cleaned = 0.108784 Jy ! Total flux subtracted in 200 components = 0.108784 Jy ! Clean residual min=-0.014598 max=0.020672 Jy/beam ! Clean residual mean=0.000325 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 1.94389 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 1.94389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116914Jy sigma=0.450879 ! Fit after self-cal, rms=0.116604Jy sigma=0.449381 ! Inverting map ! Your choice of large map pixels excluded 0.213% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7289 x 0.936 at -29.07 degrees (North through East) ! Clean map min=-0.013322 max=1.4593 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 0.99 LA 1.00 MA 1.00 ! MK 1.03 NL 1.00 NY 0.98 OV 1.02 ! PT 0.96 SC 1.00 WF 1.01 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 1.00 LA 0.99 MA 1.00 ! MK 1.01 NL 0.99 NY 0.97 OV 1.03 ! PT 0.96 SC 1.00* WF 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.99 LA 1.00 MA 1.02 ! MK 1.02 NL 1.01 NY 1.00* OV 1.01 ! PT 0.97 SC 0.95 WF 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.98 LA 1.02 MA 1.01 ! MK 1.03 NL 1.00 NY 1.00* OV 1.02 ! PT 0.96 SC 1.00 WF 0.99 ! ! ! Fit before self-cal, rms=0.116604Jy sigma=0.449381 ! Fit after self-cal, rms=0.109400Jy sigma=0.412984 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7332 mas, bmaj=0.9429 mas, bpa=-29.57 degrees ! Estimated noise=2.62352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369075 Jy ! Component: 100 - total flux cleaned = 0.00600152 Jy ! Component: 150 - total flux cleaned = 0.00770237 Jy ! Component: 200 - total flux cleaned = 0.0093216 Jy ! Total flux subtracted in 200 components = 0.0093216 Jy ! Clean residual min=-0.012359 max=0.014963 Jy/beam ! Clean residual mean=0.000409 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 1.95321 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 1.95321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108232Jy sigma=0.408806 ! Fit after self-cal, rms=0.108131Jy sigma=0.408466 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108131Jy sigma=0.408466 ! Fit after self-cal, rms=0.091062Jy sigma=0.318350 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7346 mas, bmaj=0.9417 mas, bpa=-29.18 degrees ! Estimated noise=2.61836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83586e-05 Jy ! Component: 100 - total flux cleaned = -0.000211929 Jy ! Component: 150 - total flux cleaned = -0.000547099 Jy ! Component: 200 - total flux cleaned = -0.00081934 Jy ! Total flux subtracted in 200 components = -0.00081934 Jy ! Clean residual min=-0.007857 max=0.014272 Jy/beam ! Clean residual mean=0.000387 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 1.9524 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 1.9524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090184Jy sigma=0.314125 ! Fit after self-cal, rms=0.090074Jy sigma=0.313680 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141296 Jy ! Component: 100 - total flux cleaned = 0.0213166 Jy ! Component: 150 - total flux cleaned = 0.0258545 Jy ! Component: 200 - total flux cleaned = 0.0277345 Jy ! Total flux subtracted in 200 components = 0.0277345 Jy ! Clean residual min=-0.007202 max=0.009931 Jy/beam ! Clean residual mean=0.000321 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 1.98013 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 101 components and 1.98013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087662Jy sigma=0.303522 ! Fit after self-cal, rms=0.087317Jy sigma=0.302429 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-6.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970307 Jy ! Component: 100 - total flux cleaned = 0.0156401 Jy ! Component: 150 - total flux cleaned = 0.0199106 Jy ! Component: 200 - total flux cleaned = 0.0219836 Jy ! Total flux subtracted in 200 components = 0.0219836 Jy ! Clean residual min=-0.006700 max=0.006746 Jy/beam ! Clean residual mean=0.000271 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 2.00211 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 133 components and 2.00211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085897Jy sigma=0.296181 ! Fit after self-cal, rms=0.085683Jy sigma=0.295452 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085683Jy sigma=0.295452 ! Fit after self-cal, rms=0.081127Jy sigma=0.260186 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7345 mas, bmaj=0.942 mas, bpa=-29.15 degrees ! Estimated noise=2.61978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018258 Jy ! Component: 100 - total flux cleaned = 0.00496017 Jy ! Component: 150 - total flux cleaned = 0.00750101 Jy ! Component: 200 - total flux cleaned = 0.00975109 Jy ! Total flux subtracted in 200 components = 0.00975109 Jy ! Clean residual min=-0.004743 max=0.005559 Jy/beam ! Clean residual mean=0.000225 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 2.01186 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 147 components and 2.01186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080492Jy sigma=0.257488 ! Fit after self-cal, rms=0.080411Jy sigma=0.257259 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386869 Jy ! Component: 100 - total flux cleaned = 0.00573903 Jy ! Component: 150 - total flux cleaned = 0.00702587 Jy ! Component: 200 - total flux cleaned = 0.0080065 Jy ! Total flux subtracted in 200 components = 0.0080065 Jy ! Clean residual min=-0.004409 max=0.005382 Jy/beam ! Clean residual mean=0.000206 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 2.01987 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 2.01987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079935Jy sigma=0.255522 ! Fit after self-cal, rms=0.079881Jy sigma=0.255333 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-3, -17.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408514 Jy ! Component: 100 - total flux cleaned = 0.00600536 Jy ! Component: 150 - total flux cleaned = 0.00768304 Jy ! Component: 200 - total flux cleaned = 0.00885301 Jy ! Total flux subtracted in 200 components = 0.00885301 Jy ! Clean residual min=-0.004339 max=0.004872 Jy/beam ! Clean residual mean=0.000185 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 2.02872 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 170 components and 2.02872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079477Jy sigma=0.253717 ! Fit after self-cal, rms=0.079436Jy sigma=0.253559 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (11, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411933 Jy ! Component: 100 - total flux cleaned = 0.00611508 Jy ! Component: 150 - total flux cleaned = 0.00799506 Jy ! Component: 200 - total flux cleaned = 0.00906018 Jy ! Total flux subtracted in 200 components = 0.00906018 Jy ! Clean residual min=-0.004150 max=0.004355 Jy/beam ! Clean residual mean=0.000162 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 2.03778 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 181 components and 2.03778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079073Jy sigma=0.252402 ! Fit after self-cal, rms=0.079047Jy sigma=0.252328 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079047Jy sigma=0.252328 ! Fit after self-cal, rms=0.078804Jy sigma=0.251338 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=1.92 mas, bmaj=3.561 mas, bpa=-11.63 degrees ! Estimated noise=3.813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608299 Jy ! Component: 100 - total flux cleaned = 0.0102946 Jy ! Component: 150 - total flux cleaned = 0.0134215 Jy ! Component: 200 - total flux cleaned = 0.0156526 Jy ! Total flux subtracted in 200 components = 0.0156526 Jy ! Clean residual min=-0.006391 max=0.006999 Jy/beam ! Clean residual mean=0.000380 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 2.05344 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 202 components and 2.05344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078662Jy sigma=0.251075 ! Fit after self-cal, rms=0.078599Jy sigma=0.250802 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118616 Jy ! Component: 100 - total flux cleaned = 0.0027755 Jy ! Component: 150 - total flux cleaned = 0.0040205 Jy ! Component: 200 - total flux cleaned = 0.0050131 Jy ! Total flux subtracted in 200 components = 0.0050131 Jy ! Clean residual min=-0.006267 max=0.006498 Jy/beam ! Clean residual mean=0.000342 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 2.05845 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 210 components and 2.05845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078611Jy sigma=0.251005 ! Fit after self-cal, rms=0.078585Jy sigma=0.250880 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7343 mas, bmaj=0.9419 mas, bpa=-29.12 degrees ! Estimated noise=2.61917 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7343 x 0.9419 at -29.12 degrees (North through East) ! Clean map min=-0.0037779 max=1.4565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078585Jy sigma=0.250880 ! Fit after self-cal, rms=0.074493Jy sigma=0.231067 ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7342 mas, bmaj=0.9418 mas, bpa=-29.19 degrees ! Estimated noise=2.61774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198169 Jy ! Component: 100 - total flux cleaned = 0.000116098 Jy ! Component: 150 - total flux cleaned = 0.000353278 Jy ! Component: 200 - total flux cleaned = 0.000426614 Jy ! Total flux subtracted in 200 components = 0.000426614 Jy ! Clean residual min=-0.004124 max=0.004027 Jy/beam ! Clean residual mean=0.000111 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 2.05888 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 216 components and 2.05888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074244Jy sigma=0.229972 ! Fit after self-cal, rms=0.074241Jy sigma=0.229889 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.31528e-05 Jy ! Component: 100 - total flux cleaned = 0.000318242 Jy ! Component: 150 - total flux cleaned = 0.000754521 Jy ! Component: 200 - total flux cleaned = 0.00104919 Jy ! Total flux subtracted in 200 components = 0.00104919 Jy ! Clean residual min=-0.004107 max=0.003967 Jy/beam ! Clean residual mean=0.000109 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 2.05992 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 221 components and 2.05992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074119Jy sigma=0.229452 ! Fit after self-cal, rms=0.074119Jy sigma=0.229429 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074119Jy sigma=0.229429 ! Fit after self-cal, rms=0.074025Jy sigma=0.229252 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6287 mas, bmaj=0.7767 mas, bpa=-34.44 degrees ! Estimated noise=3.65599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12186 Jy ! Component: 100 - total flux cleaned = 1.40476 Jy ! Component: 150 - total flux cleaned = 1.56173 Jy ! Component: 200 - total flux cleaned = 1.6616 Jy ! Total flux subtracted in 200 components = 1.6616 Jy ! Clean residual min=-0.017690 max=0.052718 Jy/beam ! Clean residual mean=0.000078 rms=0.004262 Jy/beam ! Combined flux in latest and established models = 1.6616 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.6616 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7341 mas, bmaj=0.9416 mas, bpa=-29.19 degrees ! Estimated noise=2.6165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0976248 Jy ! Component: 100 - total flux cleaned = 0.15725 Jy ! Component: 150 - total flux cleaned = 0.196286 Jy ! Component: 200 - total flux cleaned = 0.223261 Jy ! Total flux subtracted in 200 components = 0.223261 Jy ! Clean residual min=-0.008925 max=0.015425 Jy/beam ! Clean residual mean=0.000510 rms=0.003199 Jy/beam ! Combined flux in latest and established models = 1.88486 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 41 components and 1.88486 Jy ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204245 Jy ! Component: 100 - total flux cleaned = 0.0366047 Jy ! Component: 150 - total flux cleaned = 0.0501295 Jy ! Component: 200 - total flux cleaned = 0.0617072 Jy ! Total flux subtracted in 200 components = 0.0617072 Jy ! Clean residual min=-0.006474 max=0.008417 Jy/beam ! Clean residual mean=0.000371 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.94656 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 76 components and 1.94656 Jy ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-4.6, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102762 Jy ! Component: 100 - total flux cleaned = 0.0192469 Jy ! Component: 150 - total flux cleaned = 0.0272353 Jy ! Component: 200 - total flux cleaned = 0.0343893 Jy ! Total flux subtracted in 200 components = 0.0343893 Jy ! Clean residual min=-0.005412 max=0.005704 Jy/beam ! Clean residual mean=0.000291 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 1.98095 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 100 components and 1.98095 Jy ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=1.919 mas, bmaj=3.561 mas, bpa=-11.63 degrees ! Estimated noise=3.81179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163492 Jy ! Component: 100 - total flux cleaned = 0.0275214 Jy ! Component: 150 - total flux cleaned = 0.0361505 Jy ! Component: 200 - total flux cleaned = 0.0432578 Jy ! Total flux subtracted in 200 components = 0.0432578 Jy ! Clean residual min=-0.006643 max=0.007657 Jy/beam ! Clean residual mean=0.000603 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 2.02421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059467 Jy ! Component: 100 - total flux cleaned = 0.011003 Jy ! Component: 150 - total flux cleaned = 0.0153419 Jy ! Component: 200 - total flux cleaned = 0.0190829 Jy ! Total flux subtracted in 200 components = 0.0190829 Jy ! Clean residual min=-0.006452 max=0.006465 Jy/beam ! Clean residual mean=0.000458 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 2.04329 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 169 components and 2.04329 Jy ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.7341 mas, bmaj=0.9416 mas, bpa=-29.19 degrees ! Estimated noise=2.6165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314639 Jy ! Component: 100 - total flux cleaned = 0.00501868 Jy ! Component: 150 - total flux cleaned = 0.00698259 Jy ! Component: 200 - total flux cleaned = 0.00849394 Jy ! Total flux subtracted in 200 components = 0.00849394 Jy ! Clean residual min=-0.004088 max=0.003972 Jy/beam ! Clean residual mean=0.000123 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 2.05179 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 181 components and 2.05179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074651Jy sigma=0.232131 ! Fit after self-cal, rms=0.074486Jy sigma=0.231240 wmodel /scr/pima/rv100_uvs/J1800+7828_X_map.mod ! Writing 181 model components to file: /scr/pima/rv100_uvs/J1800+7828_X_map.mod wobs /scr/pima/rv100_uvs/J1800+7828_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J1800+7828_X_uvs.fits wwins /scr/pima/rv100_uvs/J1800+7828_X_map.win ! wwins: Wrote 10 windows to /scr/pima/rv100_uvs/J1800+7828_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113716 Jy ! Component: 100 - total flux cleaned = 0.000929779 Jy ! Component: 150 - total flux cleaned = 0.00204528 Jy ! Component: 200 - total flux cleaned = 0.00305541 Jy ! Component: 250 - total flux cleaned = 0.00403127 Jy ! Component: 300 - total flux cleaned = 0.00497936 Jy ! Component: 350 - total flux cleaned = 0.00607688 Jy ! Component: 400 - total flux cleaned = 0.00698041 Jy ! Component: 450 - total flux cleaned = 0.00781085 Jy ! Component: 500 - total flux cleaned = 0.00857028 Jy ! Component: 550 - total flux cleaned = 0.00921024 Jy ! Component: 600 - total flux cleaned = 0.00978716 Jy ! Component: 650 - total flux cleaned = 0.0104065 Jy ! Component: 700 - total flux cleaned = 0.0111169 Jy ! Component: 750 - total flux cleaned = 0.011768 Jy ! Component: 800 - total flux cleaned = 0.0123115 Jy ! Component: 850 - total flux cleaned = 0.0128485 Jy ! Component: 900 - total flux cleaned = 0.0135712 Jy ! Component: 950 - total flux cleaned = 0.0140951 Jy ! Component: 1000 - total flux cleaned = 0.0147073 Jy ! Component: 1050 - total flux cleaned = 0.015173 Jy ! Component: 1100 - total flux cleaned = 0.0156806 Jy ! Component: 1150 - total flux cleaned = 0.0160918 Jy ! Component: 1200 - total flux cleaned = 0.0167706 Jy ! Component: 1250 - total flux cleaned = 0.0172188 Jy ! Component: 1300 - total flux cleaned = 0.0178397 Jy ! Component: 1350 - total flux cleaned = 0.0183226 Jy ! Component: 1400 - total flux cleaned = 0.0188018 Jy ! Component: 1450 - total flux cleaned = 0.0192769 Jy ! Component: 1500 - total flux cleaned = 0.0198761 Jy ! Component: 1550 - total flux cleaned = 0.0202583 Jy ! Component: 1600 - total flux cleaned = 0.0207218 Jy ! Component: 1650 - total flux cleaned = 0.0211811 Jy ! Component: 1700 - total flux cleaned = 0.0215958 Jy ! Component: 1750 - total flux cleaned = 0.0218838 Jy ! Component: 1800 - total flux cleaned = 0.022374 Jy ! Component: 1850 - total flux cleaned = 0.0226172 Jy ! Component: 1900 - total flux cleaned = 0.0231002 Jy ! Component: 1950 - total flux cleaned = 0.0234595 Jy ! Component: 2000 - total flux cleaned = 0.0237772 Jy ! Component: 2050 - total flux cleaned = 0.0242103 Jy ! Component: 2100 - total flux cleaned = 0.024562 Jy ! Component: 2150 - total flux cleaned = 0.0248726 Jy ! Component: 2200 - total flux cleaned = 0.0251426 Jy ! Component: 2250 - total flux cleaned = 0.0253727 Jy ! Component: 2300 - total flux cleaned = 0.0256395 Jy ! Component: 2350 - total flux cleaned = 0.0259422 Jy ! Component: 2400 - total flux cleaned = 0.0263182 Jy ! Component: 2450 - total flux cleaned = 0.0265797 Jy ! Component: 2500 - total flux cleaned = 0.0269144 Jy ! Component: 2550 - total flux cleaned = 0.0271728 Jy ! Component: 2600 - total flux cleaned = 0.0275032 Jy ! Component: 2650 - total flux cleaned = 0.0276494 Jy ! Component: 2700 - total flux cleaned = 0.028085 Jy ! Component: 2750 - total flux cleaned = 0.0283374 Jy ! Component: 2800 - total flux cleaned = 0.0286241 Jy ! Component: 2850 - total flux cleaned = 0.0287666 Jy ! Component: 2900 - total flux cleaned = 0.0291567 Jy ! Component: 2950 - total flux cleaned = 0.0293682 Jy ! Component: 3000 - total flux cleaned = 0.0296488 Jy ! Component: 3050 - total flux cleaned = 0.0298583 Jy ! Component: 3100 - total flux cleaned = 0.0301014 Jy ! Component: 3150 - total flux cleaned = 0.0304122 Jy ! Component: 3200 - total flux cleaned = 0.0307215 Jy ! Component: 3250 - total flux cleaned = 0.0310973 Jy ! Component: 3300 - total flux cleaned = 0.0311991 Jy ! Component: 3350 - total flux cleaned = 0.0315708 Jy ! Component: 3400 - total flux cleaned = 0.0317391 Jy ! Component: 3450 - total flux cleaned = 0.0320401 Jy ! Component: 3500 - total flux cleaned = 0.0322398 Jy ! Component: 3550 - total flux cleaned = 0.032538 Jy ! Component: 3600 - total flux cleaned = 0.0329333 Jy ! Component: 3650 - total flux cleaned = 0.0330317 Jy ! Component: 3700 - total flux cleaned = 0.0333252 Jy ! Component: 3750 - total flux cleaned = 0.0335527 Jy ! Component: 3800 - total flux cleaned = 0.0337144 Jy ! Component: 3850 - total flux cleaned = 0.0339073 Jy ! Component: 3900 - total flux cleaned = 0.0340675 Jy ! Component: 3950 - total flux cleaned = 0.0343544 Jy ! Component: 4000 - total flux cleaned = 0.0345132 Jy ! Component: 4050 - total flux cleaned = 0.0346397 Jy ! Total flux subtracted in 4096 components = 0.0348602 Jy ! Clean residual min=-0.001849 max=0.001795 Jy/beam ! Clean residual mean=0.000066 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 2.08665 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 524 components and 2.08665 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J1800+7828_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7341 x 0.9416 at -29.19 degrees (North through East) ! Clean map min=-0.0027126 max=1.465 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1800+7828_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.46501 invert ! Inverting map ! Your choice of large map pixels excluded 0.215% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000519873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106458 0.106458 0.212915 0.425831 0.851661 1.70332 3.40665 6.81329 13.6266 27.2532 54.5063 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.465 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2818.02 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J1800+7828_X_uvs.log closed on Mon Feb 29 13:28:57 2016