! Started logfile: /scr/pima/rv100_uvs/J1743-0350_S_uvs.log on Mon Feb 29 13:28:58 2016
obs /scr/pima/rv100_uvs/J1743-0350_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J1743-0350_S_uva.fits
! AN table 1: 16 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.271591 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1743-0350
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 956 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1743-0350_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.336166Jy  sigma=9.222420
! Fit after  self-cal, rms=1.166982Jy  sigma=4.447778
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.413 mas, bmaj=3.446 mas, bpa=34.96 degrees
! Estimated noise=7.40704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3561 Jy
! Component: 100  -  total flux cleaned = 1.85964 Jy
! Total flux subtracted in 100 components = 1.85964 Jy
! Clean residual min=-0.094688 max=0.213773 Jy/beam
! Clean residual mean=0.000931 rms=0.024706 Jy/beam
! Combined flux in latest and established models = 1.85964 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.85964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.490856Jy  sigma=1.865583
! Fit after  self-cal, rms=0.490454Jy  sigma=1.864726
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.246869 Jy
! Component: 100  -  total flux cleaned = 0.397587 Jy
! Total flux subtracted in 100 components = 0.397587 Jy
! Clean residual min=-0.052774 max=0.077869 Jy/beam
! Clean residual mean=0.000154 rms=0.012489 Jy/beam
! Combined flux in latest and established models = 2.25722 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 2.25722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.257460Jy  sigma=1.002857
! Fit after  self-cal, rms=0.257068Jy  sigma=1.001885
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0955533 Jy
! Component: 100  -  total flux cleaned = 0.156665 Jy
! Total flux subtracted in 100 components = 0.156665 Jy
! Clean residual min=-0.036357 max=0.044209 Jy/beam
! Clean residual mean=-0.000152 rms=0.009164 Jy/beam
! Combined flux in latest and established models = 2.41389 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 2.41389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206008Jy  sigma=0.814118
! Fit after  self-cal, rms=0.205880Jy  sigma=0.813850
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.701 mas, bmaj=4.051 mas, bpa=33.76 degrees
! Estimated noise=6.42443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0374319 Jy
! Component: 100  -  total flux cleaned = 0.0565193 Jy
! Component: 150  -  total flux cleaned = 0.0590804 Jy
! Component: 200  -  total flux cleaned = 0.0599256 Jy
! Total flux subtracted in 200 components = 0.0599256 Jy
! Clean residual min=-0.045564 max=0.041249 Jy/beam
! Clean residual mean=-0.005306 rms=0.011632 Jy/beam
! Combined flux in latest and established models = 2.47381 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 2.47381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197018Jy  sigma=0.785219
! Fit after  self-cal, rms=0.196963Jy  sigma=0.785136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.701 x 4.051 at 33.76 degrees (North through East)
! Clean map  min=-0.043461  max=1.8119 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.99     HN        1.04     KP        0.95     LA        0.98     
!   MK        0.97     NL        0.98     NY        1.10     OV        0.97     
!   PT        0.98     SC        0.97     WF        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HH        1.04     HN        0.99     KP        0.94     LA        0.98     
!   MK        0.97     NL        1.01     NY        1.18     OV        0.98     
!   PT        0.98     SC        0.98     WF        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HH        1.00     HN        1.05     KP        0.96     LA        0.98     
!   MK        0.93     NL        0.99     NY        1.12     OV        0.96     
!   PT        0.97     SC        0.96     WF        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HH        1.03     HN        1.05     KP        0.96     LA        0.97     
!   MK        0.91     NL        1.03     NY        1.07     OV        1.00     
!   PT        1.01     SC        0.94     WF        1.05     
! 
! 
! Fit before self-cal, rms=0.196963Jy  sigma=0.785136
! Fit after  self-cal, rms=0.180496Jy  sigma=0.659898
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.714 mas, bmaj=4.096 mas, bpa=33.29 degrees
! Estimated noise=6.45217 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00684086 Jy
! Component: 100  -  total flux cleaned = -0.00747417 Jy
! Component: 150  -  total flux cleaned = -0.00745143 Jy
! Component: 200  -  total flux cleaned = -0.00720745 Jy
! Total flux subtracted in 200 components = -0.00720745 Jy
! Clean residual min=-0.023174 max=0.029745 Jy/beam
! Clean residual mean=0.002560 rms=0.009619 Jy/beam
! Combined flux in latest and established models = 2.46661 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 2.46661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179410Jy  sigma=0.656498
! Fit after  self-cal, rms=0.179498Jy  sigma=0.656430
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179498Jy  sigma=0.656430
! Fit after  self-cal, rms=0.141582Jy  sigma=0.514527
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.719 mas, bmaj=4.083 mas, bpa=33.31 degrees
! Estimated noise=6.4425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120313 Jy
! Component: 100  -  total flux cleaned = -0.000966878 Jy
! Component: 150  -  total flux cleaned = -0.000966539 Jy
! Component: 200  -  total flux cleaned = -0.000780725 Jy
! Total flux subtracted in 200 components = -0.000780725 Jy
! Clean residual min=-0.020396 max=0.024218 Jy/beam
! Clean residual mean=0.000456 rms=0.008058 Jy/beam
! Combined flux in latest and established models = 2.46582 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 52 components and 2.46582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141053Jy  sigma=0.511892
! Fit after  self-cal, rms=0.141005Jy  sigma=0.511818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381267 Jy
! Component: 100  -  total flux cleaned = 0.000378889 Jy
! Component: 150  -  total flux cleaned = 0.000379921 Jy
! Component: 200  -  total flux cleaned = 0.000650812 Jy
! Total flux subtracted in 200 components = 0.000650812 Jy
! Clean residual min=-0.020442 max=0.024035 Jy/beam
! Clean residual mean=0.000429 rms=0.008043 Jy/beam
! Combined flux in latest and established models = 2.46648 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 2.46648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140781Jy  sigma=0.510550
! Fit after  self-cal, rms=0.140774Jy  sigma=0.510536
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140774Jy  sigma=0.510536
! Fit after  self-cal, rms=0.143698Jy  sigma=0.542346
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.718 mas, bmaj=4.098 mas, bpa=33.39 degrees
! Estimated noise=6.37987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0189224 Jy
! Component: 100  -  total flux cleaned = -0.0289975 Jy
! Component: 150  -  total flux cleaned = -0.0351226 Jy
! Component: 200  -  total flux cleaned = -0.0388785 Jy
! Total flux subtracted in 200 components = -0.0388785 Jy
! Clean residual min=-0.021672 max=0.022746 Jy/beam
! Clean residual mean=0.000235 rms=0.009093 Jy/beam
! Combined flux in latest and established models = 2.4276 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 2.4276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141592Jy  sigma=0.534002
! Fit after  self-cal, rms=0.141574Jy  sigma=0.533971
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00135463 Jy
! Component: 100  -  total flux cleaned = -0.00199922 Jy
! Component: 150  -  total flux cleaned = -0.00258288 Jy
! Component: 200  -  total flux cleaned = -0.00303623 Jy
! Total flux subtracted in 200 components = -0.00303623 Jy
! Clean residual min=-0.021756 max=0.022789 Jy/beam
! Clean residual mean=0.000365 rms=0.009082 Jy/beam
! Combined flux in latest and established models = 2.42456 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 62 components and 2.42456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141471Jy  sigma=0.533779
! Fit after  self-cal, rms=0.141468Jy  sigma=0.533772
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141468Jy  sigma=0.533772
! Fit after  self-cal, rms=0.138723Jy  sigma=0.527717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.07 mas, bmaj=13.13 mas, bpa=-18.48 degrees
! Estimated noise=9.34565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0300015 Jy
! Component: 100  -  total flux cleaned = -0.0408003 Jy
! Component: 150  -  total flux cleaned = -0.0449423 Jy
! Component: 200  -  total flux cleaned = -0.0456255 Jy
! Total flux subtracted in 200 components = -0.0456255 Jy
! Clean residual min=-0.034462 max=0.046881 Jy/beam
! Clean residual mean=0.004923 rms=0.021795 Jy/beam
! Combined flux in latest and established models = 2.37894 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 2.37894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137735Jy  sigma=0.523195
! Fit after  self-cal, rms=0.137705Jy  sigma=0.523131
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000414804 Jy
! Component: 100  -  total flux cleaned = -0.000495744 Jy
! Component: 150  -  total flux cleaned = -0.000643368 Jy
! Component: 200  -  total flux cleaned = -0.000709826 Jy
! Total flux subtracted in 200 components = -0.000709826 Jy
! Clean residual min=-0.034465 max=0.047061 Jy/beam
! Clean residual mean=0.005006 rms=0.021790 Jy/beam
! Combined flux in latest and established models = 2.37823 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 67 components and 2.37823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137615Jy  sigma=0.522972
! Fit after  self-cal, rms=0.137597Jy  sigma=0.522869
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.717 mas, bmaj=4.116 mas, bpa=33.43 degrees
! Estimated noise=6.32437 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.717 x 4.116 at 33.43 degrees (North through East)
! Clean map  min=-0.019859  max=1.8049 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137597Jy  sigma=0.522869
! Fit after  self-cal, rms=0.131063Jy  sigma=0.495280
! Inverting map and beam 
! Estimated beam: bmin=1.709 mas, bmaj=4.134 mas, bpa=33.55 degrees
! Estimated noise=6.24873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0148187 Jy
! Component: 100  -  total flux cleaned = -0.0215837 Jy
! Component: 150  -  total flux cleaned = -0.0250449 Jy
! Component: 200  -  total flux cleaned = -0.0261998 Jy
! Total flux subtracted in 200 components = -0.0261998 Jy
! Clean residual min=-0.018622 max=0.023283 Jy/beam
! Clean residual mean=0.001858 rms=0.008431 Jy/beam
! Combined flux in latest and established models = 2.35203 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 2.35203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129899Jy  sigma=0.490030
! Fit after  self-cal, rms=0.129910Jy  sigma=0.490009
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242152 Jy
! Component: 100  -  total flux cleaned = -0.000375939 Jy
! Component: 150  -  total flux cleaned = -0.000503502 Jy
! Component: 200  -  total flux cleaned = -0.000626611 Jy
! Total flux subtracted in 200 components = -0.000626611 Jy
! Clean residual min=-0.018498 max=0.023304 Jy/beam
! Clean residual mean=0.001884 rms=0.008429 Jy/beam
! Combined flux in latest and established models = 2.3514 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 2.3514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129862Jy  sigma=0.489806
! Fit after  self-cal, rms=0.129868Jy  sigma=0.489796
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129868Jy  sigma=0.489796
! Fit after  self-cal, rms=0.128142Jy  sigma=0.484491
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.42 mas, bmaj=3.522 mas, bpa=34.57 degrees
! Estimated noise=7.19848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.31321 Jy
! Component: 100  -  total flux cleaned = 1.78854 Jy
! Component: 150  -  total flux cleaned = 2.01028 Jy
! Component: 200  -  total flux cleaned = 2.14251 Jy
! Total flux subtracted in 200 components = 2.14251 Jy
! Clean residual min=-0.037063 max=0.067758 Jy/beam
! Clean residual mean=0.000431 rms=0.008943 Jy/beam
! Combined flux in latest and established models = 2.14251 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 2.14251 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.712 mas, bmaj=4.145 mas, bpa=33.54 degrees
! Estimated noise=6.21006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101359 Jy
! Component: 100  -  total flux cleaned = 0.151277 Jy
! Component: 150  -  total flux cleaned = 0.176845 Jy
! Component: 200  -  total flux cleaned = 0.188583 Jy
! Total flux subtracted in 200 components = 0.188583 Jy
! Clean residual min=-0.017203 max=0.025591 Jy/beam
! Clean residual mean=0.002024 rms=0.008230 Jy/beam
! Combined flux in latest and established models = 2.33109 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 2.33109 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.076 mas, bmaj=13.19 mas, bpa=-18.4 degrees
! Estimated noise=9.14723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00253249 Jy
! Component: 100  -  total flux cleaned = -0.00269915 Jy
! Component: 150  -  total flux cleaned = -0.00303117 Jy
! Component: 200  -  total flux cleaned = -0.00318853 Jy
! Total flux subtracted in 200 components = -0.00318853 Jy
! Clean residual min=-0.029692 max=0.045381 Jy/beam
! Clean residual mean=0.006039 rms=0.019672 Jy/beam
! Combined flux in latest and established models = 2.3279 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309831 Jy
! Component: 100  -  total flux cleaned = -0.000460382 Jy
! Component: 150  -  total flux cleaned = -0.000754384 Jy
! Component: 200  -  total flux cleaned = -0.00103476 Jy
! Total flux subtracted in 200 components = -0.00103476 Jy
! Clean residual min=-0.029517 max=0.045335 Jy/beam
! Clean residual mean=0.006163 rms=0.019657 Jy/beam
! Combined flux in latest and established models = 2.32687 Jy
! Adding 3 model components to the UV plane model.
! The established model now contains 39 components and 2.32687 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.712 mas, bmaj=4.145 mas, bpa=33.54 degrees
! Estimated noise=6.21006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349204 Jy
! Component: 100  -  total flux cleaned = 0.00476273 Jy
! Component: 150  -  total flux cleaned = 0.00530055 Jy
! Component: 200  -  total flux cleaned = 0.00554957 Jy
! Total flux subtracted in 200 components = 0.00554957 Jy
! Clean residual min=-0.016941 max=0.023640 Jy/beam
! Clean residual mean=0.001967 rms=0.008173 Jy/beam
! Combined flux in latest and established models = 2.33242 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 46 components and 2.33242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129109Jy  sigma=0.487843
! Fit after  self-cal, rms=0.129072Jy  sigma=0.487445
wmodel /scr/pima/rv100_uvs/J1743-0350_S_map.mod
! Writing 46 model components to file: /scr/pima/rv100_uvs/J1743-0350_S_map.mod
wobs /scr/pima/rv100_uvs/J1743-0350_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J1743-0350_S_uvs.fits
wwins /scr/pima/rv100_uvs/J1743-0350_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rv100_uvs/J1743-0350_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108981 Jy
! Component: 100  -  total flux cleaned = 0.0205495 Jy
! Component: 150  -  total flux cleaned = 0.0294751 Jy
! Component: 200  -  total flux cleaned = 0.0355572 Jy
! Component: 250  -  total flux cleaned = 0.0394448 Jy
! Component: 300  -  total flux cleaned = 0.0419548 Jy
! Component: 350  -  total flux cleaned = 0.0437832 Jy
! Component: 400  -  total flux cleaned = 0.0455665 Jy
! Component: 450  -  total flux cleaned = 0.0467258 Jy
! Component: 500  -  total flux cleaned = 0.0478564 Jy
! Component: 550  -  total flux cleaned = 0.0481333 Jy
! Component: 600  -  total flux cleaned = 0.0492252 Jy
! Component: 650  -  total flux cleaned = 0.0500281 Jy
! Component: 700  -  total flux cleaned = 0.0505538 Jy
! Component: 750  -  total flux cleaned = 0.051068 Jy
! Component: 800  -  total flux cleaned = 0.0513214 Jy
! Component: 850  -  total flux cleaned = 0.0518186 Jy
! Component: 900  -  total flux cleaned = 0.0520631 Jy
! Component: 950  -  total flux cleaned = 0.0523067 Jy
! Component: 1000  -  total flux cleaned = 0.0525448 Jy
! Component: 1050  -  total flux cleaned = 0.0527783 Jy
! Component: 1100  -  total flux cleaned = 0.0527783 Jy
! Component: 1150  -  total flux cleaned = 0.0530058 Jy
! Component: 1200  -  total flux cleaned = 0.0530041 Jy
! Component: 1250  -  total flux cleaned = 0.0530034 Jy
! Component: 1300  -  total flux cleaned = 0.0527848 Jy
! Component: 1350  -  total flux cleaned = 0.0529988 Jy
! Component: 1400  -  total flux cleaned = 0.0523639 Jy
! Component: 1450  -  total flux cleaned = 0.052783 Jy
! Component: 1500  -  total flux cleaned = 0.0525766 Jy
! Component: 1550  -  total flux cleaned = 0.052374 Jy
! Component: 1600  -  total flux cleaned = 0.0525767 Jy
! Component: 1650  -  total flux cleaned = 0.0525757 Jy
! Component: 1700  -  total flux cleaned = 0.0523791 Jy
! Component: 1750  -  total flux cleaned = 0.0523795 Jy
! Component: 1800  -  total flux cleaned = 0.0521872 Jy
! Component: 1850  -  total flux cleaned = 0.0521878 Jy
! Component: 1900  -  total flux cleaned = 0.0521875 Jy
! Component: 1950  -  total flux cleaned = 0.052187 Jy
! Component: 2000  -  total flux cleaned = 0.051819 Jy
! Component: 2050  -  total flux cleaned = 0.0518186 Jy
! Component: 2100  -  total flux cleaned = 0.0516383 Jy
! Component: 2150  -  total flux cleaned = 0.0512823 Jy
! Component: 2200  -  total flux cleaned = 0.0512829 Jy
! Component: 2250  -  total flux cleaned = 0.0512832 Jy
! Component: 2300  -  total flux cleaned = 0.0509382 Jy
! Component: 2350  -  total flux cleaned = 0.0511088 Jy
! Component: 2400  -  total flux cleaned = 0.0509403 Jy
! Component: 2450  -  total flux cleaned = 0.0507728 Jy
! Component: 2500  -  total flux cleaned = 0.0506087 Jy
! Component: 2550  -  total flux cleaned = 0.0507738 Jy
! Component: 2600  -  total flux cleaned = 0.0506126 Jy
! Component: 2650  -  total flux cleaned = 0.0507741 Jy
! Component: 2700  -  total flux cleaned = 0.0506147 Jy
! Component: 2750  -  total flux cleaned = 0.0506151 Jy
! Component: 2800  -  total flux cleaned = 0.0506153 Jy
! Component: 2850  -  total flux cleaned = 0.0506148 Jy
! Component: 2900  -  total flux cleaned = 0.0506142 Jy
! Component: 2950  -  total flux cleaned = 0.0503098 Jy
! Component: 3000  -  total flux cleaned = 0.050311 Jy
! Component: 3050  -  total flux cleaned = 0.0503117 Jy
! Component: 3100  -  total flux cleaned = 0.0503118 Jy
! Component: 3150  -  total flux cleaned = 0.0501652 Jy
! Component: 3200  -  total flux cleaned = 0.0503109 Jy
! Component: 3250  -  total flux cleaned = 0.0501669 Jy
! Component: 3300  -  total flux cleaned = 0.0503092 Jy
! Component: 3350  -  total flux cleaned = 0.0501671 Jy
! Component: 3400  -  total flux cleaned = 0.0500267 Jy
! Component: 3450  -  total flux cleaned = 0.0500266 Jy
! Component: 3500  -  total flux cleaned = 0.0498888 Jy
! Component: 3550  -  total flux cleaned = 0.0500258 Jy
! Component: 3600  -  total flux cleaned = 0.0498903 Jy
! Component: 3650  -  total flux cleaned = 0.0498906 Jy
! Component: 3700  -  total flux cleaned = 0.0497573 Jy
! Component: 3750  -  total flux cleaned = 0.0498902 Jy
! Component: 3800  -  total flux cleaned = 0.0498905 Jy
! Component: 3850  -  total flux cleaned = 0.0498901 Jy
! Component: 3900  -  total flux cleaned = 0.0497611 Jy
! Component: 3950  -  total flux cleaned = 0.0497616 Jy
! Component: 4000  -  total flux cleaned = 0.0498883 Jy
! Component: 4050  -  total flux cleaned = 0.0497617 Jy
! Total flux subtracted in 4096 components = 0.0497619 Jy
! Clean residual min=-0.006815 max=0.007197 Jy/beam
! Clean residual mean=-0.000061 rms=0.003725 Jy/beam
! Combined flux in latest and established models = 2.38218 Jy
keep
! Adding 543 model components to the UV plane model.
! The established model now contains 589 components and 2.38218 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J1743-0350_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.712 x 4.145 at 33.54 degrees (North through East)
! Clean map  min=-0.015947  max=1.7665 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1743-0350_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.76647 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00359961 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.611324 0.611324 1.22265 2.44529 4.89059 9.78118 19.5624 39.1247 78.2494
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0107 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.766 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  490.738 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J1743-0350_S_uvs.log closed on Mon Feb 29 13:29:02 2016