! Started logfile: /scr/pima/rv100_uvs/J1659+2629_X_uvs.log on Mon Feb 29 13:28:34 2016
obs /scr/pima/rv100_uvs/J1659+2629_X_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J1659+2629_X_uva.fits
! AN table 1: 36 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.767857 visibilities/baseline/integration-bin.
! Found source: J1659+2629
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3096 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1659+2629_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.125377Jy  sigma=9.778467
! Fit after  self-cal, rms=0.515593Jy  sigma=4.419067
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.804 mas, bmaj=1.977 mas, bpa=16.45 degrees
! Estimated noise=2.62131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.375973 Jy
! Component: 100  -  total flux cleaned = 0.458584 Jy
! Total flux subtracted in 100 components = 0.458584 Jy
! Clean residual min=-0.016960 max=0.026678 Jy/beam
! Clean residual mean=-0.000005 rms=0.004876 Jy/beam
! Combined flux in latest and established models = 0.458584 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.458584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088397Jy  sigma=0.738236
! Fit after  self-cal, rms=0.088374Jy  sigma=0.738034
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9955 mas, bmaj=2.218 mas, bpa=11.26 degrees
! Estimated noise=1.57374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0440343 Jy
! Component: 100  -  total flux cleaned = 0.0704529 Jy
! Component: 150  -  total flux cleaned = 0.0878874 Jy
! Component: 200  -  total flux cleaned = 0.099928 Jy
! Total flux subtracted in 200 components = 0.099928 Jy
! Clean residual min=-0.007544 max=0.009912 Jy/beam
! Clean residual mean=-0.000005 rms=0.002164 Jy/beam
! Combined flux in latest and established models = 0.558512 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 27 components and 0.558512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060000Jy  sigma=0.488570
! Fit after  self-cal, rms=0.059004Jy  sigma=0.477631
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9955 x 2.218 at 11.26 degrees (North through East)
! Clean map  min=-0.0069314  max=0.49038 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00     KP        0.97     LA        0.99     MK        1.04     
!   NL        1.00     OV        0.99     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        0.97     LA        0.99     MK        1.04     
!   NL        0.99     OV        1.00     PT        0.99     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00     KP        0.95     LA        1.00     MK        1.03     
!   NL        1.01     OV        1.01     PT        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.02     KP        0.94     LA        1.00     MK        1.05     
!   NL        1.02     OV        1.01     PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.059004Jy  sigma=0.477631
! Fit after  self-cal, rms=0.055691Jy  sigma=0.454638
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.999 mas, bmaj=2.212 mas, bpa=11.58 degrees
! Estimated noise=1.55489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00835636 Jy
! Component: 100  -  total flux cleaned = 0.0120013 Jy
! Component: 150  -  total flux cleaned = 0.0133366 Jy
! Component: 200  -  total flux cleaned = 0.0138689 Jy
! Total flux subtracted in 200 components = 0.0138689 Jy
! Clean residual min=-0.003700 max=0.004192 Jy/beam
! Clean residual mean=-0.000003 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.572381 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 47 components and 0.572381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054316Jy  sigma=0.442348
! Fit after  self-cal, rms=0.054285Jy  sigma=0.441659
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054285Jy  sigma=0.441659
! Fit after  self-cal, rms=0.053811Jy  sigma=0.438379
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9992 mas, bmaj=2.205 mas, bpa=11.67 degrees
! Estimated noise=1.55146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320933 Jy
! Component: 100  -  total flux cleaned = 0.00433929 Jy
! Component: 150  -  total flux cleaned = 0.00459411 Jy
! Component: 200  -  total flux cleaned = 0.00470669 Jy
! Total flux subtracted in 200 components = 0.00470669 Jy
! Clean residual min=-0.002802 max=0.003312 Jy/beam
! Clean residual mean=-0.000001 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.577088 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.577088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053558Jy  sigma=0.436390
! Fit after  self-cal, rms=0.053549Jy  sigma=0.436243
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -38.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199964 Jy
! Component: 100  -  total flux cleaned = 0.00251606 Jy
! Component: 150  -  total flux cleaned = 0.00284251 Jy
! Component: 200  -  total flux cleaned = 0.00303303 Jy
! Total flux subtracted in 200 components = 0.00303303 Jy
! Clean residual min=-0.002601 max=0.002607 Jy/beam
! Clean residual mean=-0.000001 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.580121 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.580121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053359Jy  sigma=0.434679
! Fit after  self-cal, rms=0.053357Jy  sigma=0.434610
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053357Jy  sigma=0.434610
! Fit after  self-cal, rms=0.053333Jy  sigma=0.434268
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9992 mas, bmaj=2.205 mas, bpa=11.68 degrees
! Estimated noise=1.55083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136983 Jy
! Component: 100  -  total flux cleaned = 0.00177658 Jy
! Component: 150  -  total flux cleaned = 0.00177839 Jy
! Component: 200  -  total flux cleaned = 0.00181621 Jy
! Total flux subtracted in 200 components = 0.00181621 Jy
! Clean residual min=-0.002728 max=0.002453 Jy/beam
! Clean residual mean=-0.000002 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.581937 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.581937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053256Jy  sigma=0.433768
! Fit after  self-cal, rms=0.053256Jy  sigma=0.433748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271176 Jy
! Component: 100  -  total flux cleaned = 0.000271722 Jy
! Component: 150  -  total flux cleaned = 0.000271762 Jy
! Component: 200  -  total flux cleaned = 0.000241122 Jy
! Total flux subtracted in 200 components = 0.000241122 Jy
! Clean residual min=-0.002739 max=0.002397 Jy/beam
! Clean residual mean=-0.000002 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.582178 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 108 components and 0.582178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053215Jy  sigma=0.433485
! Fit after  self-cal, rms=0.053217Jy  sigma=0.433480
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053217Jy  sigma=0.433480
! Fit after  self-cal, rms=0.053203Jy  sigma=0.433370
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.866 mas, bmaj=3.339 mas, bpa=-7.648 degrees
! Estimated noise=1.90218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000618406 Jy
! Component: 100  -  total flux cleaned = 0.000544932 Jy
! Component: 150  -  total flux cleaned = 0.000412161 Jy
! Component: 200  -  total flux cleaned = 0.000295333 Jy
! Total flux subtracted in 200 components = 0.000295333 Jy
! Clean residual min=-0.002680 max=0.002603 Jy/beam
! Clean residual mean=-0.000004 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.582473 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 0.582473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053178Jy  sigma=0.433229
! Fit after  self-cal, rms=0.053175Jy  sigma=0.433212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158626 Jy
! Component: 100  -  total flux cleaned = 0.000132452 Jy
! Component: 150  -  total flux cleaned = 8.34472e-05 Jy
! Component: 200  -  total flux cleaned = 3.81327e-05 Jy
! Total flux subtracted in 200 components = 3.81327e-05 Jy
! Clean residual min=-0.002739 max=0.002596 Jy/beam
! Clean residual mean=-0.000004 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.582511 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.582511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053159Jy  sigma=0.433152
! Fit after  self-cal, rms=0.053158Jy  sigma=0.433149
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9991 mas, bmaj=2.205 mas, bpa=11.68 degrees
! Estimated noise=1.55061 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9991 x 2.205 at 11.68 degrees (North through East)
! Clean map  min=-0.0026457  max=0.48436 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=1.97 mas, bpa=16.8 degrees
! Estimated noise=2.58606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.370756 Jy
! Component: 100  -  total flux cleaned = 0.452411 Jy
! Component: 150  -  total flux cleaned = 0.484459 Jy
! Component: 200  -  total flux cleaned = 0.506031 Jy
! Total flux subtracted in 200 components = 0.506031 Jy
! Clean residual min=-0.010417 max=0.012281 Jy/beam
! Clean residual mean=-0.000005 rms=0.002763 Jy/beam
! Combined flux in latest and established models = 0.506031 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.506031 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9991 mas, bmaj=2.205 mas, bpa=11.68 degrees
! Estimated noise=1.55061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226075 Jy
! Component: 100  -  total flux cleaned = 0.037629 Jy
! Component: 150  -  total flux cleaned = 0.0479839 Jy
! Component: 200  -  total flux cleaned = 0.0554072 Jy
! Total flux subtracted in 200 components = 0.0554072 Jy
! Clean residual min=-0.004213 max=0.004713 Jy/beam
! Clean residual mean=-0.000006 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.561438 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 0.561438 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.866 mas, bmaj=3.339 mas, bpa=-7.648 degrees
! Estimated noise=1.90218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00832354 Jy
! Component: 100  -  total flux cleaned = 0.0131443 Jy
! Component: 150  -  total flux cleaned = 0.0162949 Jy
! Component: 200  -  total flux cleaned = 0.0185295 Jy
! Total flux subtracted in 200 components = 0.0185295 Jy
! Clean residual min=-0.003145 max=0.002958 Jy/beam
! Clean residual mean=-0.000006 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.579968 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017001 Jy
! Component: 100  -  total flux cleaned = 0.00236967 Jy
! Component: 150  -  total flux cleaned = 0.00246701 Jy
! Component: 200  -  total flux cleaned = 0.00259995 Jy
! Total flux subtracted in 200 components = 0.00259995 Jy
! Clean residual min=-0.002822 max=0.002940 Jy/beam
! Clean residual mean=-0.000005 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.582568 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 68 components and 0.582568 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9991 mas, bmaj=2.205 mas, bpa=11.68 degrees
! Estimated noise=1.55061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000776578 Jy
! Component: 100  -  total flux cleaned = 0.000585762 Jy
! Component: 150  -  total flux cleaned = 0.000528326 Jy
! Component: 200  -  total flux cleaned = 0.000525487 Jy
! Total flux subtracted in 200 components = 0.000525487 Jy
! Clean residual min=-0.002826 max=0.002639 Jy/beam
! Clean residual mean=-0.000002 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.583093 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.583093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053295Jy  sigma=0.434369
! Fit after  self-cal, rms=0.053277Jy  sigma=0.434166
wmodel /scr/pima/rv100_uvs/J1659+2629_X_map.mod
! Writing 91 model components to file: /scr/pima/rv100_uvs/J1659+2629_X_map.mod
wobs /scr/pima/rv100_uvs/J1659+2629_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J1659+2629_X_uvs.fits
wwins /scr/pima/rv100_uvs/J1659+2629_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv100_uvs/J1659+2629_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000706122 Jy
! Component: 100  -  total flux cleaned = -0.00123188 Jy
! Component: 150  -  total flux cleaned = -0.00181523 Jy
! Component: 200  -  total flux cleaned = -0.00229375 Jy
! Component: 250  -  total flux cleaned = -0.00279315 Jy
! Component: 300  -  total flux cleaned = -0.00331222 Jy
! Component: 350  -  total flux cleaned = -0.00370777 Jy
! Component: 400  -  total flux cleaned = -0.00405871 Jy
! Component: 450  -  total flux cleaned = -0.00440068 Jy
! Component: 500  -  total flux cleaned = -0.00476642 Jy
! Component: 550  -  total flux cleaned = -0.00505783 Jy
! Component: 600  -  total flux cleaned = -0.00540587 Jy
! Component: 650  -  total flux cleaned = -0.00571497 Jy
! Component: 700  -  total flux cleaned = -0.0060484 Jy
! Component: 750  -  total flux cleaned = -0.0063752 Jy
! Component: 800  -  total flux cleaned = -0.00663725 Jy
! Component: 850  -  total flux cleaned = -0.00683685 Jy
! Component: 900  -  total flux cleaned = -0.00711675 Jy
! Component: 950  -  total flux cleaned = -0.00725453 Jy
! Component: 1000  -  total flux cleaned = -0.00749791 Jy
! Component: 1050  -  total flux cleaned = -0.00765756 Jy
! Component: 1100  -  total flux cleaned = -0.00776241 Jy
! Component: 1150  -  total flux cleaned = -0.00796847 Jy
! Component: 1200  -  total flux cleaned = -0.00804495 Jy
! Component: 1250  -  total flux cleaned = -0.00816987 Jy
! Component: 1300  -  total flux cleaned = -0.00829248 Jy
! Component: 1350  -  total flux cleaned = -0.00841366 Jy
! Component: 1400  -  total flux cleaned = -0.008461 Jy
! Component: 1450  -  total flux cleaned = -0.00855512 Jy
! Component: 1500  -  total flux cleaned = -0.00857792 Jy
! Component: 1550  -  total flux cleaned = -0.00869251 Jy
! Component: 1600  -  total flux cleaned = -0.00867 Jy
! Component: 1650  -  total flux cleaned = -0.00880488 Jy
! Component: 1700  -  total flux cleaned = -0.00887132 Jy
! Component: 1750  -  total flux cleaned = -0.00898071 Jy
! Component: 1800  -  total flux cleaned = -0.00904568 Jy
! Component: 1850  -  total flux cleaned = -0.00915252 Jy
! Component: 1900  -  total flux cleaned = -0.00917382 Jy
! Component: 1950  -  total flux cleaned = -0.00917408 Jy
! Component: 2000  -  total flux cleaned = -0.0092776 Jy
! Component: 2050  -  total flux cleaned = -0.00929832 Jy
! Component: 2100  -  total flux cleaned = -0.00937984 Jy
! Component: 2150  -  total flux cleaned = -0.00944025 Jy
! Component: 2200  -  total flux cleaned = -0.00950041 Jy
! Component: 2250  -  total flux cleaned = -0.00959921 Jy
! Component: 2300  -  total flux cleaned = -0.00967749 Jy
! Component: 2350  -  total flux cleaned = -0.00973582 Jy
! Component: 2400  -  total flux cleaned = -0.0098321 Jy
! Component: 2450  -  total flux cleaned = -0.00988946 Jy
! Component: 2500  -  total flux cleaned = -0.00994615 Jy
! Component: 2550  -  total flux cleaned = -0.0100026 Jy
! Component: 2600  -  total flux cleaned = -0.0100771 Jy
! Component: 2650  -  total flux cleaned = -0.0101511 Jy
! Component: 2700  -  total flux cleaned = -0.010224 Jy
! Component: 2750  -  total flux cleaned = -0.0102783 Jy
! Component: 2800  -  total flux cleaned = -0.0103324 Jy
! Component: 2850  -  total flux cleaned = -0.0104576 Jy
! Component: 2900  -  total flux cleaned = -0.010493 Jy
! Component: 2950  -  total flux cleaned = -0.0106162 Jy
! Component: 3000  -  total flux cleaned = -0.0106337 Jy
! Component: 3050  -  total flux cleaned = -0.0107725 Jy
! Component: 3100  -  total flux cleaned = -0.0107896 Jy
! Component: 3150  -  total flux cleaned = -0.0109265 Jy
! Component: 3200  -  total flux cleaned = -0.0109434 Jy
! Component: 3250  -  total flux cleaned = -0.0110446 Jy
! Component: 3300  -  total flux cleaned = -0.0110613 Jy
! Component: 3350  -  total flux cleaned = -0.0111113 Jy
! Component: 3400  -  total flux cleaned = -0.0111942 Jy
! Component: 3450  -  total flux cleaned = -0.0112599 Jy
! Component: 3500  -  total flux cleaned = -0.011309 Jy
! Component: 3550  -  total flux cleaned = -0.0114388 Jy
! Component: 3600  -  total flux cleaned = -0.0115516 Jy
! Component: 3650  -  total flux cleaned = -0.0116159 Jy
! Component: 3700  -  total flux cleaned = -0.0117437 Jy
! Component: 3750  -  total flux cleaned = -0.0118548 Jy
! Component: 3800  -  total flux cleaned = -0.0119022 Jy
! Component: 3850  -  total flux cleaned = -0.0120122 Jy
! Component: 3900  -  total flux cleaned = -0.0120749 Jy
! Component: 3950  -  total flux cleaned = -0.0122304 Jy
! Component: 4000  -  total flux cleaned = -0.0123384 Jy
! Component: 4050  -  total flux cleaned = -0.0123999 Jy
! Total flux subtracted in 4096 components = -0.0124612 Jy
! Clean residual min=-0.000946 max=0.000937 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.570632 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 347 components and 0.570633 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J1659+2629_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9991 x 2.205 at 11.68 degrees (North through East)
! Clean map  min=-0.0019276  max=0.48325 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1659+2629_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.483252 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025291 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.157005 0.157005 0.31401 0.62802 1.25604 2.51208 5.02416 10.0483 20.0966 40.1933 80.3866
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.483 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1910.77 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J1659+2629_X_uvs.log closed on Mon Feb 29 13:28:38 2016