! Started logfile: /scr/pima/rv100_uvs/J1553-2422_S_uvs.log on Mon Feb 29 13:28:31 2016
obs /scr/pima/rv100_uvs/J1553-2422_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J1553-2422_S_uva.fits
! AN table 1: 55 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.585065 visibilities/baseline/integration-bin.
! Found source: J1553-2422
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3604 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1553-2422_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018655Jy  sigma=7.546939
! Fit after  self-cal, rms=0.894269Jy  sigma=6.599349
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.937 mas, bmaj=12.74 mas, bpa=-17.6 degrees
! Estimated noise=2.88188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.082339 Jy
! Component: 100  -  total flux cleaned = 0.100608 Jy
! Total flux subtracted in 100 components = 0.100608 Jy
! Clean residual min=-0.006671 max=0.007064 Jy/beam
! Clean residual mean=-0.000028 rms=0.001779 Jy/beam
! Combined flux in latest and established models = 0.100608 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.100608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067772Jy  sigma=0.478479
! Fit after  self-cal, rms=0.067760Jy  sigma=0.478399
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.641 mas, bmaj=15.57 mas, bpa=-17.82 degrees
! Estimated noise=1.6725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00994168 Jy
! Component: 100  -  total flux cleaned = 0.0147111 Jy
! Component: 150  -  total flux cleaned = 0.017411 Jy
! Component: 200  -  total flux cleaned = 0.0189964 Jy
! Total flux subtracted in 200 components = 0.0189964 Jy
! Clean residual min=-0.003654 max=0.003386 Jy/beam
! Clean residual mean=-0.000015 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.119605 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 44 components and 0.119605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066560Jy  sigma=0.466502
! Fit after  self-cal, rms=0.066578Jy  sigma=0.466321
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.641 x 15.57 at -17.82 degrees (North through East)
! Clean map  min=-0.0035355  max=0.10643 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.07     KP        0.94     LA        0.97     MK        1.01     
!   NL        1.00     OV        1.02     PT        1.00     SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.02     KP        0.91     LA        1.00     MK        1.04     
!   NL        1.01     OV        0.99     PT        1.02     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.12     KP        0.98     LA        1.01     MK        1.03     
!   NL        0.97     OV        0.94     PT        1.05     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.07     KP        1.03     LA        0.97     MK        0.95     
!   NL        0.99     OV        1.01     PT        1.05     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.066578Jy  sigma=0.466321
! Fit after  self-cal, rms=0.066688Jy  sigma=0.466153
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=15.46 mas, bpa=-17.63 degrees
! Estimated noise=1.67509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375593 Jy
! Component: 100  -  total flux cleaned = -0.000311908 Jy
! Component: 150  -  total flux cleaned = -0.000255906 Jy
! Component: 200  -  total flux cleaned = -0.000204589 Jy
! Total flux subtracted in 200 components = -0.000204589 Jy
! Clean residual min=-0.002801 max=0.003066 Jy/beam
! Clean residual mean=0.000000 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.1194 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.1194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066657Jy  sigma=0.465978
! Fit after  self-cal, rms=0.066682Jy  sigma=0.465894
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066682Jy  sigma=0.465894
! Fit after  self-cal, rms=0.067113Jy  sigma=0.464484
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=15.47 mas, bpa=-17.63 degrees
! Estimated noise=1.68096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.35315e-06 Jy
! Component: 100  -  total flux cleaned = 4.14976e-05 Jy
! Component: 150  -  total flux cleaned = 4.14257e-05 Jy
! Component: 200  -  total flux cleaned = 4.16337e-05 Jy
! Total flux subtracted in 200 components = 4.16337e-05 Jy
! Clean residual min=-0.002947 max=0.002995 Jy/beam
! Clean residual mean=0.000007 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.119442 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.119442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067096Jy  sigma=0.464401
! Fit after  self-cal, rms=0.067112Jy  sigma=0.464377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-89, 67).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179419 Jy
! Component: 100  -  total flux cleaned = 0.00163054 Jy
! Component: 150  -  total flux cleaned = 0.00140856 Jy
! Component: 200  -  total flux cleaned = 0.00117198 Jy
! Total flux subtracted in 200 components = 0.00117198 Jy
! Clean residual min=-0.002758 max=0.002731 Jy/beam
! Clean residual mean=0.000002 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.120614 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 90 components and 0.120614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067006Jy  sigma=0.463556
! Fit after  self-cal, rms=0.066999Jy  sigma=0.463492
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066999Jy  sigma=0.463492
! Fit after  self-cal, rms=0.066926Jy  sigma=0.462697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=15.49 mas, bpa=-17.62 degrees
! Estimated noise=1.67423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231358 Jy
! Component: 100  -  total flux cleaned = 0.000235113 Jy
! Component: 150  -  total flux cleaned = 0.000202093 Jy
! Component: 200  -  total flux cleaned = 0.000172611 Jy
! Total flux subtracted in 200 components = 0.000172611 Jy
! Clean residual min=-0.002503 max=0.002476 Jy/beam
! Clean residual mean=0.000007 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.120786 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 102 components and 0.120786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066890Jy  sigma=0.462462
! Fit after  self-cal, rms=0.066907Jy  sigma=0.462430
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.00481e-05 Jy
! Component: 100  -  total flux cleaned = 3.33115e-05 Jy
! Component: 150  -  total flux cleaned = 3.30048e-05 Jy
! Component: 200  -  total flux cleaned = 7.71041e-06 Jy
! Total flux subtracted in 200 components = 7.71041e-06 Jy
! Clean residual min=-0.002477 max=0.002459 Jy/beam
! Clean residual mean=0.000007 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.120794 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.120794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066887Jy  sigma=0.462302
! Fit after  self-cal, rms=0.066887Jy  sigma=0.462299
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066887Jy  sigma=0.462299
! Fit after  self-cal, rms=0.066792Jy  sigma=0.462276
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.393 mas, bmaj=24.18 mas, bpa=-14.02 degrees
! Estimated noise=1.91428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000655542 Jy
! Component: 100  -  total flux cleaned = -0.000576873 Jy
! Component: 150  -  total flux cleaned = -0.000542868 Jy
! Component: 200  -  total flux cleaned = -0.000527833 Jy
! Total flux subtracted in 200 components = -0.000527833 Jy
! Clean residual min=-0.001941 max=0.002256 Jy/beam
! Clean residual mean=0.000014 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.120266 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.120266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066785Jy  sigma=0.462203
! Fit after  self-cal, rms=0.066783Jy  sigma=0.462190
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309284 Jy
! Component: 100  -  total flux cleaned = -0.000366971 Jy
! Component: 150  -  total flux cleaned = -0.000380279 Jy
! Component: 200  -  total flux cleaned = -0.000353836 Jy
! Total flux subtracted in 200 components = -0.000353836 Jy
! Clean residual min=-0.001910 max=0.002249 Jy/beam
! Clean residual mean=0.000016 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.119912 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 0.119912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066779Jy  sigma=0.462153
! Fit after  self-cal, rms=0.066778Jy  sigma=0.462151
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.72 mas, bmaj=15.49 mas, bpa=-17.6 degrees
! Estimated noise=1.67193 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.72 x 15.49 at -17.6 degrees (North through East)
! Clean map  min=-0.0024013  max=0.10613 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=12.62 mas, bpa=-17.48 degrees
! Estimated noise=2.7648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0819155 Jy
! Component: 100  -  total flux cleaned = 0.100093 Jy
! Component: 150  -  total flux cleaned = 0.107388 Jy
! Component: 200  -  total flux cleaned = 0.110736 Jy
! Total flux subtracted in 200 components = 0.110736 Jy
! Clean residual min=-0.004858 max=0.004970 Jy/beam
! Clean residual mean=-0.000011 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.110736 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.110736 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.72 mas, bmaj=15.49 mas, bpa=-17.6 degrees
! Estimated noise=1.67193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436088 Jy
! Component: 100  -  total flux cleaned = 0.00590265 Jy
! Component: 150  -  total flux cleaned = 0.00722984 Jy
! Component: 200  -  total flux cleaned = 0.00828485 Jy
! Total flux subtracted in 200 components = 0.00828485 Jy
! Clean residual min=-0.002706 max=0.002517 Jy/beam
! Clean residual mean=0.000002 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.119021 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 45 components and 0.119021 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.393 mas, bmaj=24.18 mas, bpa=-14.02 degrees
! Estimated noise=1.91428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179223 Jy
! Component: 100  -  total flux cleaned = 0.000137702 Jy
! Component: 150  -  total flux cleaned = 0.00052831 Jy
! Component: 200  -  total flux cleaned = 0.000646852 Jy
! Total flux subtracted in 200 components = 0.000646852 Jy
! Clean residual min=-0.002152 max=0.002368 Jy/beam
! Clean residual mean=0.000013 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.119668 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.74323e-05 Jy
! Component: 100  -  total flux cleaned = 0.000167019 Jy
! Component: 150  -  total flux cleaned = 0.000207096 Jy
! Component: 200  -  total flux cleaned = 0.000188879 Jy
! Total flux subtracted in 200 components = 0.000188879 Jy
! Clean residual min=-0.002030 max=0.002359 Jy/beam
! Clean residual mean=0.000015 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.119857 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 90 components and 0.119857 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.72 mas, bmaj=15.49 mas, bpa=-17.6 degrees
! Estimated noise=1.67193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000230609 Jy
! Component: 100  -  total flux cleaned = -0.00050247 Jy
! Component: 150  -  total flux cleaned = -0.000580805 Jy
! Component: 200  -  total flux cleaned = -0.000651668 Jy
! Total flux subtracted in 200 components = -0.000651668 Jy
! Clean residual min=-0.002363 max=0.002467 Jy/beam
! Clean residual mean=0.000008 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.119205 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 105 components and 0.119205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066804Jy  sigma=0.462322
! Fit after  self-cal, rms=0.066795Jy  sigma=0.462298
wmodel /scr/pima/rv100_uvs/J1553-2422_S_map.mod
! Writing 105 model components to file: /scr/pima/rv100_uvs/J1553-2422_S_map.mod
wobs /scr/pima/rv100_uvs/J1553-2422_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J1553-2422_S_uvs.fits
wwins /scr/pima/rv100_uvs/J1553-2422_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv100_uvs/J1553-2422_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495184 Jy
! Component: 100  -  total flux cleaned = 0.000848554 Jy
! Component: 150  -  total flux cleaned = 0.000994106 Jy
! Component: 200  -  total flux cleaned = 0.00106253 Jy
! Component: 250  -  total flux cleaned = 0.00112914 Jy
! Component: 300  -  total flux cleaned = 0.00112988 Jy
! Component: 350  -  total flux cleaned = 0.00119183 Jy
! Component: 400  -  total flux cleaned = 0.00119133 Jy
! Component: 450  -  total flux cleaned = 0.00113311 Jy
! Component: 500  -  total flux cleaned = 0.00110476 Jy
! Component: 550  -  total flux cleaned = 0.00107733 Jy
! Component: 600  -  total flux cleaned = 0.00107735 Jy
! Component: 650  -  total flux cleaned = 0.00105105 Jy
! Component: 700  -  total flux cleaned = 0.000999037 Jy
! Component: 750  -  total flux cleaned = 0.0010502 Jy
! Component: 800  -  total flux cleaned = 0.00107519 Jy
! Component: 850  -  total flux cleaned = 0.00114901 Jy
! Component: 900  -  total flux cleaned = 0.0011976 Jy
! Component: 950  -  total flux cleaned = 0.00134007 Jy
! Component: 1000  -  total flux cleaned = 0.00140999 Jy
! Component: 1050  -  total flux cleaned = 0.00150189 Jy
! Component: 1100  -  total flux cleaned = 0.00152471 Jy
! Component: 1150  -  total flux cleaned = 0.00168169 Jy
! Component: 1200  -  total flux cleaned = 0.00176994 Jy
! Component: 1250  -  total flux cleaned = 0.00183557 Jy
! Component: 1300  -  total flux cleaned = 0.00200744 Jy
! Component: 1350  -  total flux cleaned = 0.00209225 Jy
! Component: 1400  -  total flux cleaned = 0.00217608 Jy
! Component: 1450  -  total flux cleaned = 0.00227955 Jy
! Component: 1500  -  total flux cleaned = 0.00234063 Jy
! Component: 1550  -  total flux cleaned = 0.00244131 Jy
! Component: 1600  -  total flux cleaned = 0.00256063 Jy
! Component: 1650  -  total flux cleaned = 0.00259978 Jy
! Component: 1700  -  total flux cleaned = 0.00269669 Jy
! Component: 1750  -  total flux cleaned = 0.00279276 Jy
! Component: 1800  -  total flux cleaned = 0.00284955 Jy
! Component: 1850  -  total flux cleaned = 0.00296242 Jy
! Component: 1900  -  total flux cleaned = 0.00303673 Jy
! Component: 1950  -  total flux cleaned = 0.00316576 Jy
! Component: 2000  -  total flux cleaned = 0.00327504 Jy
! Component: 2050  -  total flux cleaned = 0.00338364 Jy
! Component: 2100  -  total flux cleaned = 0.00352676 Jy
! Component: 2150  -  total flux cleaned = 0.00363285 Jy
! Component: 2200  -  total flux cleaned = 0.00373798 Jy
! Component: 2250  -  total flux cleaned = 0.00380735 Jy
! Component: 2300  -  total flux cleaned = 0.00392767 Jy
! Component: 2350  -  total flux cleaned = 0.00406402 Jy
! Component: 2400  -  total flux cleaned = 0.0041484 Jy
! Component: 2450  -  total flux cleaned = 0.00426571 Jy
! Component: 2500  -  total flux cleaned = 0.00438199 Jy
! Component: 2550  -  total flux cleaned = 0.00448086 Jy
! Component: 2600  -  total flux cleaned = 0.00452972 Jy
! Component: 2650  -  total flux cleaned = 0.00465987 Jy
! Component: 2700  -  total flux cleaned = 0.00470824 Jy
! Component: 2750  -  total flux cleaned = 0.00483633 Jy
! Component: 2800  -  total flux cleaned = 0.00489997 Jy
! Component: 2850  -  total flux cleaned = 0.00502599 Jy
! Component: 2900  -  total flux cleaned = 0.00518219 Jy
! Component: 2950  -  total flux cleaned = 0.00524427 Jy
! Component: 3000  -  total flux cleaned = 0.0053521 Jy
! Component: 3050  -  total flux cleaned = 0.00547445 Jy
! Component: 3100  -  total flux cleaned = 0.0055807 Jy
! Component: 3150  -  total flux cleaned = 0.00570129 Jy
! Component: 3200  -  total flux cleaned = 0.00577614 Jy
! Component: 3250  -  total flux cleaned = 0.00591002 Jy
! Component: 3300  -  total flux cleaned = 0.00598388 Jy
! Component: 3350  -  total flux cleaned = 0.00608667 Jy
! Component: 3400  -  total flux cleaned = 0.00615953 Jy
! Component: 3450  -  total flux cleaned = 0.00626105 Jy
! Component: 3500  -  total flux cleaned = 0.0063331 Jy
! Component: 3550  -  total flux cleaned = 0.00641896 Jy
! Component: 3600  -  total flux cleaned = 0.00650426 Jy
! Component: 3650  -  total flux cleaned = 0.00654655 Jy
! Component: 3700  -  total flux cleaned = 0.00651835 Jy
! Component: 3750  -  total flux cleaned = 0.00657436 Jy
! Component: 3800  -  total flux cleaned = 0.00660209 Jy
! Component: 3850  -  total flux cleaned = 0.00660204 Jy
! Component: 3900  -  total flux cleaned = 0.0065883 Jy
! Component: 3950  -  total flux cleaned = 0.00658834 Jy
! Component: 4000  -  total flux cleaned = 0.00667018 Jy
! Component: 4050  -  total flux cleaned = 0.00662944 Jy
! Total flux subtracted in 4096 components = 0.00666997 Jy
! Clean residual min=-0.000753 max=0.000790 Jy/beam
! Clean residual mean=0.000005 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.125875 Jy
keep
! Adding 226 model components to the UV plane model.
! The established model now contains 331 components and 0.125875 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J1553-2422_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.72 x 15.49 at -17.6 degrees (North through East)
! Clean map  min=-0.0023279  max=0.10679 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1553-2422_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.106793 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248582 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.698307 0.698307 1.39661 2.79323 5.58645 11.1729 22.3458 44.6916 89.3833
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  429.61 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J1553-2422_S_uvs.log closed on Mon Feb 29 13:28:35 2016